KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

package/ep80579-drivers: refresh patches

Browse source 
SVN-Revision: 31801
This commit is contained in:
Gabor Juhos 2012-05-18 20:10:28 +00:00
parent 1751186f18
commit 7217afc657
7 changed files with 35 additions and 39 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

28
package/ep80579-drivers/patches/001-igbe_update.patch
View file

@ -144,7 +144,7 @@
/**
* gcu_probe_err - gcu_probe error handler
* @err: gcu_err_type
@@ -295,7 +293,7 @@ gcu_notify_reboot(struct notifier_block
@@ -295,7 +293,7 @@ gcu_notify_reboot(struct notifier_block
case SYS_DOWN:
case SYS_HALT:
case SYS_POWER_OFF:
@ -589,7 +589,7 @@
Contact Information:
@@ -2115,7 +2115,7 @@ iegbe_config_mac_to_phy(struct iegbe_hw
@@ -2115,7 +2115,7 @@ iegbe_config_mac_to_phy(struct iegbe_hw
ret_val = iegbe_oem_set_trans_gasket(hw);
if(ret_val){
@ -598,7 +598,7 @@
}
ret_val = iegbe_oem_phy_is_full_duplex(
hw, (int *) &is_FullDuplex);
@@ -2164,7 +2164,7 @@ iegbe_config_mac_to_phy(struct iegbe_hw
@@ -2164,7 +2164,7 @@ iegbe_config_mac_to_phy(struct iegbe_hw
}
/* Write the configured values back to the Device Control Reg. */
E1000_WRITE_REG(hw, CTRL, ctrl);
@ -911,7 +911,7 @@
/* iegbe_pci_tbl - PCI Device ID Table
*
@@ -148,95 +60,48 @@ char iegbe_copyright[] = "Copyright (c)
@@ -148,95 +60,48 @@ char iegbe_copyright[] = "Copyright (c)
* {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
*/
static struct pci_device_id iegbe_pci_tbl[] = {
@ -3025,7 +3025,7 @@
}
/**
@@ -1512,113 +1412,108 @@ iegbe_configure_tx(struct iegbe_adapter
@@ -1512,113 +1412,108 @@ iegbe_configure_tx(struct iegbe_adapter
/* Setup the HW Tx Head and Tail descriptor pointers */
@ -3210,7 +3210,7 @@
hw->bus_type == iegbe_bus_type_pcix) {
adapter->pcix_82544 = 0x1;
}
@@ -1632,96 +1527,95 @@ iegbe_configure_tx(struct iegbe_adapter
@@ -1632,96 +1527,95 @@ iegbe_configure_tx(struct iegbe_adapter
* Returns 0 on success, negative on failure
**/
@ -3830,7 +3830,7 @@
}
/**
@@ -2022,20 +1859,19 @@ iegbe_configure_rx(struct iegbe_adapter
@@ -2022,20 +1859,19 @@ iegbe_configure_rx(struct iegbe_adapter
* Free all transmit software resources
**/
@ -5848,7 +5848,7 @@
}
/**
@@ -3232,13 +3212,12 @@ iegbe_tx_timeout_task(struct net_device
@@ -3232,13 +3212,12 @@ iegbe_tx_timeout_task(struct net_device
* The statistics are actually updated from the timer callback.
**/
@ -6877,7 +6877,7 @@
/**
* iegbe_rx_checksum - Receive Checksum Offload for 82543
@@ -3913,192 +3689,193 @@ iegbe_clean_tx_irq(struct iegbe_adapter
@@ -3913,192 +3689,193 @@ iegbe_clean_tx_irq(struct iegbe_adapter
* @sk_buff: socket buffer with received data
**/
@ -9333,7 +9333,7 @@
iegbe_oem_phy_reset_dsp(struct iegbe_hw *hw)
{
#ifdef EXTERNAL_MDIO
@@ -478,10 +413,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
@@ -478,10 +413,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
* no-op.
*/
switch (hw->phy_id) {
@ -9346,7 +9346,7 @@
DEBUGOUT("No DSP to reset on OEM PHY\n");
break;
default:
@@ -508,7 +441,7 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
@@ -508,7 +441,7 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
* This is called from iegbe_phy_force_speed_duplex, which is
* called from iegbe_oem_setup_link.
**/
@ -9623,7 +9623,7 @@
iegbe_oem_phy_is_copper(struct iegbe_hw *hw)
{
#ifdef EXTERNAL_MDIO
@@ -827,23 +738,21 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
@@ -827,23 +738,21 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
switch (hw->phy_id) {
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
@ -9650,7 +9650,7 @@
*/
DEBUGOUT("Invalid value for transceiver type, return FALSE\n");
return FALSE;
@@ -856,19 +765,19 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
@@ -856,19 +765,19 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
* iegbe_oem_get_phy_dev_number
* @hw: iegbe_hw struct containing device specific information
*
@ -10804,7 +10804,7 @@
uint32_t data_length);
int iegbe_oem_phy_loopback(struct iegbe_adapter *adapter);
void iegbe_oem_loopback_cleanup(struct iegbe_adapter *adapter);
@@ -94,81 +94,14 @@ int32_t iegbe_oem_phy_is_link_up(struct
@@ -94,81 +94,14 @@ int32_t iegbe_oem_phy_is_link_up(struct
#define ICP_XXXX_MAC_2 2
#define DEFAULT_ICP_XXXX_TIPG_IPGT 8 /* Inter Packet Gap Transmit Time */

2
package/ep80579-drivers/patches/100-iegbe_netdev_ops.patch
View file

@ -27,7 +27,7 @@
/**
* iegbe_probe - Device Initialization Routine
* @pdev: PCI device information struct
@@ -800,24 +820,11 @@ static int __devinit iegbe_probe(struct
@@ -800,24 +820,11 @@ static int __devinit iegbe_probe(struct
if (!hw->hw_addr)
goto err_ioremap;

4
package/ep80579-drivers/patches/102-iegbe_nuke_polling_netdev.patch
View file

@ -10,7 +10,7 @@
int num_rx_queues;
--- a/Embedded/src/GbE/iegbe_main.c
+++ b/Embedded/src/GbE/iegbe_main.c
@@ -763,7 +763,7 @@ static int __devinit iegbe_probe(struct
@@ -763,7 +763,7 @@ static int __devinit iegbe_probe(struct
struct iegbe_hw *hw;
static int cards_found = 0;
@ -85,7 +85,7 @@
**/
static int __devinit
@@ -1158,15 +1143,6 @@ iegbe_alloc_queues(struct iegbe_adapter
@@ -1158,15 +1143,6 @@ iegbe_alloc_queues(struct iegbe_adapter
return -ENOMEM;
}

2
package/ep80579-drivers/patches/105-iegbe_new_dma_masks.patch
View file

@ -1,6 +1,6 @@
--- a/Embedded/src/GbE/iegbe_main.c
+++ b/Embedded/src/GbE/iegbe_main.c
@@ -775,13 +775,13 @@ static int __devinit iegbe_probe(struct
@@ -775,13 +775,13 @@ static int __devinit iegbe_probe(struct
if (err)
return err;

8
package/ep80579-drivers/patches/150-ocracoke_island.patch
View file

@ -99,7 +99,7 @@
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
ret_val = iegbe_oem_read_phy_reg_ex(hw,
@@ -415,6 +479,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
@@ -415,6 +479,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
switch (hw->phy_id) {
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
@ -161,7 +161,7 @@
phy_num = DEFAULT_ICP_XXXX_TIPG_IPGT;
break;
default:
@@ -738,6 +829,8 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
@@ -738,6 +829,8 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
switch (hw->phy_id) {
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
@ -670,7 +670,7 @@
+}
--- a/Embedded/src/GbE/iegbe_oem_phy.h
+++ b/Embedded/src/GbE/iegbe_oem_phy.h
@@ -95,6 +95,8 @@ int32_t iegbe_oem_phy_is_link_up(struct
@@ -95,6 +95,8 @@ int32_t iegbe_oem_phy_is_link_up(struct
#define DEFAULT_ICP_XXXX_TIPG_IPGT 8 /* Inter Packet Gap Transmit Time */
#define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL
@ -679,7 +679,7 @@
/* Miscellaneous defines */
#ifdef IEGBE_10_100_ONLY
@@ -103,5 +105,65 @@ int32_t iegbe_oem_phy_is_link_up(struct
@@ -103,5 +105,65 @@ int32_t iegbe_oem_phy_is_link_up(struct
#define ICP_XXXX_AUTONEG_ADV_DEFAULT 0x2F
#endif

13
package/ep80579-drivers/patches/230-can_remove_driver_data_direct_access.patch
View file

@ -1,7 +1,6 @@
diff -Nur a/Embedded/src/CAN/can_main.c b/Embedded/src/CAN/can_main.c
--- a/Embedded/src/CAN/can_main.c 2009-11-30 10:44:39.044269751 +0100
+++ b/Embedded/src/CAN/can_main.c 2009-11-30 10:54:41.434355642 +0100
@@ -213,8 +213,8 @@
--- a/Embedded/src/CAN/can_main.c
+++ b/Embedded/src/CAN/can_main.c
@@ -214,8 +214,8 @@ int can_pci_probe(struct pci_dev *dev, c
spin_lock_init(&(g_can_os[can_num].int_spinlock));
spin_lock_init(&(g_can_os[can_num].open_spinlock));
@ -12,7 +11,7 @@ diff -Nur a/Embedded/src/CAN/can_main.c b/Embedded/src/CAN/can_main.c
{
printk("Couldn't create CAN device %d. Exiting.\n",
dev->device);
@@ -236,7 +236,7 @@
@@ -237,7 +237,7 @@ int can_pci_probe(struct pci_dev *dev, c
*****************************************************************************/
void can_pci_remove(struct pci_dev *dev)
{
@ -21,7 +20,7 @@ diff -Nur a/Embedded/src/CAN/can_main.c b/Embedded/src/CAN/can_main.c
iounmap(can_os->pci_remap);
icp_can_destroy(can_os->can);
@@ -250,7 +250,7 @@
@@ -251,7 +251,7 @@ int can_pci_suspend(struct pci_dev *dev,
{
unsigned int i;
unsigned int int_status;
@ -30,7 +29,7 @@ diff -Nur a/Embedded/src/CAN/can_main.c b/Embedded/src/CAN/can_main.c
int err;
/* Indicate that we are suspending */
@@ -321,7 +321,7 @@
@@ -322,7 +322,7 @@ int can_pci_suspend(struct pci_dev *dev,
int can_pci_resume(struct pci_dev *dev)
{
unsigned int i;

17
package/ep80579-drivers/patches/601-2.6.32_includes.patch
View file

@ -1,6 +1,5 @@
diff -Nur a/Embedded/src/1588/1588.c b/Embedded/src/1588/1588.c
--- a/Embedded/src/1588/1588.c 2009-11-10 14:20:46.563322192 +0100
+++ b/Embedded/src/1588/1588.c 2009-11-30 10:44:22.144270452 +0100
--- a/Embedded/src/1588/1588.c
+++ b/Embedded/src/1588/1588.c
@@ -72,6 +72,7 @@
*
****************************************************************************/
@ -9,9 +8,8 @@ diff -Nur a/Embedded/src/1588/1588.c b/Embedded/src/1588/1588.c
#include "1588.h"
MODULE_AUTHOR("Intel(R) Corporation");
diff -Nur a/Embedded/src/CAN/can_main.c b/Embedded/src/CAN/can_main.c
--- a/Embedded/src/CAN/can_main.c 2009-11-10 14:20:46.563322192 +0100
+++ b/Embedded/src/CAN/can_main.c 2009-11-30 10:44:39.044269751 +0100
--- a/Embedded/src/CAN/can_main.c
+++ b/Embedded/src/CAN/can_main.c
@@ -68,6 +68,7 @@
*
**************************************************************************/
@ -19,10 +17,9 @@ diff -Nur a/Embedded/src/CAN/can_main.c b/Embedded/src/CAN/can_main.c
+#include <linux/sched.h>
#include "can_main.h"
#include "can_ioctl.h"
diff -Nur a/Embedded/src/WDT/iwdt.c b/Embedded/src/WDT/iwdt.c
--- a/Embedded/src/WDT/iwdt.c 2009-11-10 14:20:46.563322192 +0100
+++ b/Embedded/src/WDT/iwdt.c 2009-11-30 10:44:54.024262744 +0100
#include <linux/fs.h>
--- a/Embedded/src/WDT/iwdt.c
+++ b/Embedded/src/WDT/iwdt.c
@@ -137,6 +137,7 @@
#include <linux/watchdog.h>
#include <linux/miscdevice.h>