ipq806x: switch to upstream usb driver and backport fixes

Also removing fifo-resize property drom DT as it has been removed from the driver.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
This commit is contained in:
Pavel Kubelun 2016-11-12 14:35:56 +03:00 committed by John Crispin
parent 6e65576f2d
commit 70434c3f94
18 changed files with 1094 additions and 23 deletions

View file

@ -19,7 +19,7 @@ DEFAULT_PACKAGES += \
kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
kmod-ata-core kmod-ata-ahci kmod-ata-ahci-platform \
kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
kmod-usb3 kmod-usb-dwc3-of-simple kmod-usb-phy-qcom-dwc3 \
kmod-ath10k wpad-mini \
uboot-envtools

View file

@ -790,7 +790,6 @@
interrupts = <0 110 0x4>;
phys = <&hs_phy_0>, <&ss_phy_0>;
phy-names = "usb2-phy", "usb3-phy";
tx-fifo-resize;
dr_mode = "host";
};
};
@ -812,7 +811,6 @@
interrupts = <0 205 0x4>;
phys = <&hs_phy_1>, <&ss_phy_1>;
phy-names = "usb2-phy", "usb3-phy";
tx-fifo-resize;
dr_mode = "host";
};
};

View file

@ -29,20 +29,3 @@ define KernelPackage/usb-phy-qcom-dwc3/description
endef
$(eval $(call KernelPackage,usb-phy-qcom-dwc3))
define KernelPackage/usb-dwc3-qcom
TITLE:=DWC3 USB QCOM controller driver
DEPENDS:=@TARGET_ipq806x +kmod-usb-dwc3 +kmod-usb-phy-qcom-dwc3
KCONFIG:= CONFIG_USB_DWC3_QCOM
FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko
AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom,1)
$(call AddDepends/usb)
endef
define KernelPackage/usb-dwc3-qcom/description
This driver provides support for the integrated DesignWare
USB3 IP Core within the QCOM SoCs.
endef
$(eval $(call KernelPackage,usb-dwc3-qcom))

View file

@ -0,0 +1,46 @@
From 1407bf13e3bf5f1168484c3e68b6ef9d8cf2bc72 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Mon, 16 Nov 2015 16:06:37 -0600
Subject: usb: dwc3: core: purge dev_dbg() calls
The last few dev_dbg() messages are converted to
tracepoints and we can finally ignore dev_dbg()
messages during debug sessions.
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
drivers/usb/dwc3/core.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 22b47973..de5e01f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -272,7 +272,8 @@ static int dwc3_event_buffers_setup(struct dwc3 *dwc)
for (n = 0; n < dwc->num_event_buffers; n++) {
evt = dwc->ev_buffs[n];
- dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n",
+ dwc3_trace(trace_dwc3_core,
+ "Event buf %p dma %08llx length %d\n",
evt->buf, (unsigned long long) evt->dma,
evt->length);
@@ -608,12 +609,13 @@ static int dwc3_core_init(struct dwc3 *dwc)
reg |= DWC3_GCTL_GBLHIBERNATIONEN;
break;
default:
- dev_dbg(dwc->dev, "No power optimization available\n");
+ dwc3_trace(trace_dwc3_core, "No power optimization available\n");
}
/* check if current dwc3 is on simulation board */
if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
- dev_dbg(dwc->dev, "it is on FPGA board\n");
+ dwc3_trace(trace_dwc3_core,
+ "running on FPGA platform\n");
dwc->is_fpga = true;
}
--
cgit v0.12

View file

@ -0,0 +1,56 @@
From 2c7f1bd9127a1a49ee25d9c2b2ce17b11c7fb05f Mon Sep 17 00:00:00 2001
From: John Youn <John.Youn@synopsys.com>
Date: Fri, 5 Feb 2016 17:08:59 -0800
Subject: usb: dwc3: Update maximum_speed for SuperSpeedPlus
If the maximum_speed is not set, set it to a known value, either
SuperSpeed or SuperSpeedPlus based on the type of controller we are
using. If we are on DWC_usb31 controller, check the PHY interface to see
if it is capable of SuperSpeedPlus.
Also this check is moved after dwc3_core_init() so that we can check
dwc->revision.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
---
drivers/usb/dwc3/core.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index de5e01f..001c755 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -962,10 +962,6 @@ static int dwc3_probe(struct platform_device *pdev)
fladj = pdata->fladj_value;
}
- /* default to superspeed if no maximum_speed passed */
- if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
- dwc->maximum_speed = USB_SPEED_SUPER;
-
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@@ -1016,6 +1012,19 @@ static int dwc3_probe(struct platform_device *pdev)
goto err1;
}
+ /* default to superspeed if no maximum_speed passed */
+ if (dwc->maximum_speed == USB_SPEED_UNKNOWN) {
+ dwc->maximum_speed = USB_SPEED_SUPER;
+
+ /*
+ * default to superspeed plus if we are capable.
+ */
+ if (dwc3_is_usb31(dwc) &&
+ (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
+ DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
+ dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
+ }
+
/* Adjust Frame Length */
dwc3_frame_length_adjustment(dwc, fladj);
--
cgit v0.12

View file

@ -0,0 +1,74 @@
From 77966eb85e6d988a6daaf8ac14ac33026ceb3ab7 Mon Sep 17 00:00:00 2001
From: John Youn <John.Youn@synopsys.com>
Date: Fri, 19 Feb 2016 17:31:01 -0800
Subject: usb: dwc3: Validate the maximum_speed parameter
Check that dwc->maximum_speed is set to a valid value. Also add an error
when we use it later if we encounter an invalid value.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
---
drivers/usb/dwc3/core.c | 18 ++++++++++++++++--
drivers/usb/dwc3/gadget.c | 9 ++++++---
2 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 001c755..17fd814 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1012,8 +1012,20 @@ static int dwc3_probe(struct platform_device *pdev)
goto err1;
}
- /* default to superspeed if no maximum_speed passed */
- if (dwc->maximum_speed == USB_SPEED_UNKNOWN) {
+ /* Check the maximum_speed parameter */
+ switch (dwc->maximum_speed) {
+ case USB_SPEED_LOW:
+ case USB_SPEED_FULL:
+ case USB_SPEED_HIGH:
+ case USB_SPEED_SUPER:
+ case USB_SPEED_SUPER_PLUS:
+ break;
+ default:
+ dev_err(dev, "invalid maximum_speed parameter %d\n",
+ dwc->maximum_speed);
+ /* fall through */
+ case USB_SPEED_UNKNOWN:
+ /* default to superspeed */
dwc->maximum_speed = USB_SPEED_SUPER;
/*
@@ -1023,6 +1035,8 @@ static int dwc3_probe(struct platform_device *pdev)
(DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
+
+ break;
}
/* Adjust Frame Length */
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 482e6a1..3ac170f 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1670,10 +1670,13 @@ static int dwc3_gadget_start(struct usb_gadget *g,
case USB_SPEED_SUPER_PLUS:
reg |= DWC3_DSTS_SUPERSPEED_PLUS;
break;
- case USB_SPEED_SUPER: /* FALLTHROUGH */
- case USB_SPEED_UNKNOWN: /* FALTHROUGH */
default:
- reg |= DWC3_DSTS_SUPERSPEED;
+ dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
+ dwc->maximum_speed);
+ /* fall through */
+ case USB_SPEED_SUPER:
+ reg |= DWC3_DCFG_SUPERSPEED;
+ break;
}
}
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
--
cgit v0.12

View file

@ -0,0 +1,32 @@
From c4137a9c841ec7fb300782d211f2d6907f4d6e20 Mon Sep 17 00:00:00 2001
From: John Youn <John.Youn@synopsys.com>
Date: Fri, 5 Feb 2016 17:08:18 -0800
Subject: usb: dwc3: DWC_usb31 controller check
Add a convenience function to check if the controller is DWC_usb31.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
---
drivers/usb/dwc3/core.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index e4f8b90..c0520d67 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1024,6 +1024,12 @@ struct dwc3_gadget_ep_cmd_params {
void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
+/* check whether we are on the DWC_usb31 core */
+static inline bool dwc3_is_usb31(struct dwc3 *dwc)
+{
+ return !!(dwc->revision & DWC3_REVISION_IS_DWC31);
+}
+
#if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
int dwc3_host_init(struct dwc3 *dwc);
void dwc3_host_exit(struct dwc3 *dwc);
--
cgit v0.12

View file

@ -0,0 +1,46 @@
From 1f38f88a24c86d46cf47782ffabd5457f231f8ca Mon Sep 17 00:00:00 2001
From: John Youn <John.Youn@synopsys.com>
Date: Fri, 5 Feb 2016 17:08:31 -0800
Subject: usb: dwc3: Update register fields for SuperSpeedPlus
Update various registers fields definitions for the DWC_usb31 controller
for SuperSpeedPlus support.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
---
drivers/usb/dwc3/core.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index c0520d67..6254b2f 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -223,7 +223,8 @@
/* Global HWPARAMS3 Register */
#define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3)
#define DWC3_GHWPARAMS3_SSPHY_IFC_DIS 0
-#define DWC3_GHWPARAMS3_SSPHY_IFC_ENA 1
+#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN1 1
+#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN2 2 /* DWC_usb31 only */
#define DWC3_GHWPARAMS3_HSPHY_IFC(n) (((n) & (3 << 2)) >> 2)
#define DWC3_GHWPARAMS3_HSPHY_IFC_DIS 0
#define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI 1
@@ -249,6 +250,7 @@
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
#define DWC3_DCFG_SPEED_MASK (7 << 0)
+#define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DCFG_SUPERSPEED (4 << 0)
#define DWC3_DCFG_HIGHSPEED (0 << 0)
#define DWC3_DCFG_FULLSPEED2 (1 << 0)
@@ -339,6 +341,7 @@
#define DWC3_DSTS_CONNECTSPD (7 << 0)
+#define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DSTS_SUPERSPEED (4 << 0)
#define DWC3_DSTS_HIGHSPEED (0 << 0)
#define DWC3_DSTS_FULLSPEED2 (1 << 0)
--
cgit v0.12

View file

@ -0,0 +1,101 @@
From f59dcab176293b646e1358144c93c58c3cda2813 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@linux.intel.com>
Date: Fri, 11 Mar 2016 10:51:52 +0200
Subject: usb: dwc3: core: improve reset sequence
According to Synopsys Databook, we shouldn't be
relying on GCTL.CORESOFTRESET bit as that's only for
debugging purposes. Instead, let's use DCTL.CSFTRST
if we're OTG or PERIPHERAL mode.
Host side block will be reset by XHCI driver if
necessary. Note that this reduces amount of time
spent on dwc3_probe() by a long margin.
We're still gonna wait for reset to finish for a
long time (default to 1ms max), but tests show that
the reset polling loop executed at most 19 times
(modprobe dwc3 && modprobe -r dwc3 executed 1000
times in a row).
Suggested-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
---
drivers/usb/dwc3/core.c | 48 ++++++++++++++++++------------------------------
1 file changed, 18 insertions(+), 30 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 17fd814..fa20f5a9 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -67,23 +67,9 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
static int dwc3_core_soft_reset(struct dwc3 *dwc)
{
u32 reg;
+ int retries = 1000;
int ret;
- /* Before Resetting PHY, put Core in Reset */
- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
- reg |= DWC3_GCTL_CORESOFTRESET;
- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
-
- /* Assert USB3 PHY reset */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
- reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
-
- /* Assert USB2 PHY reset */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
-
usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
ret = phy_init(dwc->usb2_generic_phy);
@@ -95,26 +81,28 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
phy_exit(dwc->usb2_generic_phy);
return ret;
}
- mdelay(100);
- /* Clear USB3 PHY reset */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
- reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+ /*
+ * We're resetting only the device side because, if we're in host mode,
+ * XHCI driver will reset the host block. If dwc3 was configured for
+ * host-only mode, then we can return early.
+ */
+ if (dwc->dr_mode == USB_DR_MODE_HOST)
+ return 0;
- /* Clear USB2 PHY reset */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg |= DWC3_DCTL_CSFTRST;
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
- mdelay(100);
+ do {
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ if (!(reg & DWC3_DCTL_CSFTRST))
+ return 0;
- /* After PHYs are stable we can take Core out of reset state */
- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
- reg &= ~DWC3_GCTL_CORESOFTRESET;
- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+ udelay(1);
+ } while (--retries);
- return 0;
+ return -ETIMEDOUT;
}
/**
--
cgit v0.12

View file

@ -0,0 +1,258 @@
From bc5081617faeb3b2f0c126dc37264b87af7da47f Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@linux.intel.com>
Date: Thu, 4 Feb 2016 14:18:01 +0200
Subject: usb: dwc3: drop FIFO resizing logic
That FIFO resizing logic was added to support OMAP5
ES1.0 which had a bogus default FIFO size. I can't
remember the exact size of default FIFO, but it was
less than one bulk superspeed packet (<1024) which
would prevent USB3 from ever working on OMAP5 ES1.0.
However, OMAP5 ES1.0 support has been dropped by
commit aa2f4b16f830 ("ARM: OMAP5: id: Remove ES1.0
support") which renders FIFO resizing unnecessary.
Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 4 +-
.../devicetree/bindings/usb/qcom,dwc3.txt | 1 -
drivers/usb/dwc3/core.c | 4 -
drivers/usb/dwc3/core.h | 5 --
drivers/usb/dwc3/ep0.c | 9 ---
drivers/usb/dwc3/gadget.c | 86 ----------------------
drivers/usb/dwc3/platform_data.h | 1 -
7 files changed, 2 insertions(+), 108 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index fb2ad0a..1569568 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -14,7 +14,6 @@ Optional properties:
the second element is expected to be a handle to the USB3/SS PHY
- phys: from the *Generic PHY* bindings
- phy-names: from the *Generic PHY* bindings
- - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
- snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
- snps,disable_scramble_quirk: true when SW should disable data scrambling.
Only really useful for FPGA builds.
@@ -47,6 +46,8 @@ Optional properties:
register for post-silicon frame length adjustment when the
fladj_30mhz_sdbnd signal is invalid or incorrect.
+ - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
+
This is usually a subnode to DWC3 glue to which it is connected.
dwc3@4a030000 {
@@ -54,5 +55,4 @@ dwc3@4a030000 {
reg = <0x4a030000 0xcfff>;
interrupts = <0 92 4>
usb-phy = <&usb2_phy>, <&usb3,phy>;
- tx-fifo-resize;
};
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
index ca164e7..39acb08 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -59,7 +59,6 @@ Example device nodes:
interrupts = <0 205 0x4>;
phys = <&hs_phy>, <&ss_phy>;
phy-names = "usb2-phy", "usb3-phy";
- tx-fifo-resize;
dr_mode = "host";
};
};
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index fa20f5a9..67d183a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -882,9 +882,6 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->usb3_lpm_capable = device_property_read_bool(dev,
"snps,usb3_lpm_capable");
- dwc->needs_fifo_resize = device_property_read_bool(dev,
- "tx-fifo-resize");
-
dwc->disable_scramble_quirk = device_property_read_bool(dev,
"snps,disable_scramble_quirk");
dwc->u2exit_lfps_quirk = device_property_read_bool(dev,
@@ -926,7 +923,6 @@ static int dwc3_probe(struct platform_device *pdev)
if (pdata->hird_threshold)
hird_threshold = pdata->hird_threshold;
- dwc->needs_fifo_resize = pdata->tx_fifo_resize;
dwc->usb3_lpm_capable = pdata->usb3_lpm_capable;
dwc->dr_mode = pdata->dr_mode;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 6254b2f..7cbe9e9 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -709,9 +709,7 @@ struct dwc3_scratchpad_array {
* 0 - utmi_sleep_n
* 1 - utmi_l1_suspend_n
* @is_fpga: true when we are using the FPGA board
- * @needs_fifo_resize: not all users might want fifo resizing, flag it
* @pullups_connected: true when Run/Stop bit is set
- * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes.
* @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
* @start_config_issued: true when StartConfig command has been issued
* @three_stage_setup: set if we perform a three phase setup
@@ -855,9 +853,7 @@ struct dwc3 {
unsigned has_lpm_erratum:1;
unsigned is_utmi_l1_suspend:1;
unsigned is_fpga:1;
- unsigned needs_fifo_resize:1;
unsigned pullups_connected:1;
- unsigned resize_fifos:1;
unsigned setup_packet_pending:1;
unsigned three_stage_setup:1;
unsigned usb3_lpm_capable:1;
@@ -1025,7 +1021,6 @@ struct dwc3_gadget_ep_cmd_params {
/* prototypes */
void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
-int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
/* check whether we are on the DWC_usb31 core */
static inline bool dwc3_is_usb31(struct dwc3 *dwc)
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index eca2e6d..4454de0 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -586,9 +586,6 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA);
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
-
- dwc->resize_fifos = true;
- dwc3_trace(trace_dwc3_ep0, "resize FIFOs flag SET");
}
break;
@@ -1027,12 +1024,6 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
{
- if (dwc->resize_fifos) {
- dwc3_trace(trace_dwc3_ep0, "Resizing FIFOs");
- dwc3_gadget_resize_tx_fifos(dwc);
- dwc->resize_fifos = 0;
- }
-
WARN_ON(dwc3_ep0_start_control_status(dep));
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index d54a028..3a5c271 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -145,92 +145,6 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
return -ETIMEDOUT;
}
-/**
- * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
- * @dwc: pointer to our context structure
- *
- * This function will a best effort FIFO allocation in order
- * to improve FIFO usage and throughput, while still allowing
- * us to enable as many endpoints as possible.
- *
- * Keep in mind that this operation will be highly dependent
- * on the configured size for RAM1 - which contains TxFifo -,
- * the amount of endpoints enabled on coreConsultant tool, and
- * the width of the Master Bus.
- *
- * In the ideal world, we would always be able to satisfy the
- * following equation:
- *
- * ((512 + 2 * MDWIDTH-Bytes) + (Number of IN Endpoints - 1) * \
- * (3 * (1024 + MDWIDTH-Bytes) + MDWIDTH-Bytes)) / MDWIDTH-Bytes
- *
- * Unfortunately, due to many variables that's not always the case.
- */
-int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
-{
- int last_fifo_depth = 0;
- int ram1_depth;
- int fifo_size;
- int mdwidth;
- int num;
-
- if (!dwc->needs_fifo_resize)
- return 0;
-
- ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
- mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
-
- /* MDWIDTH is represented in bits, we need it in bytes */
- mdwidth >>= 3;
-
- /*
- * FIXME For now we will only allocate 1 wMaxPacketSize space
- * for each enabled endpoint, later patches will come to
- * improve this algorithm so that we better use the internal
- * FIFO space
- */
- for (num = 0; num < dwc->num_in_eps; num++) {
- /* bit0 indicates direction; 1 means IN ep */
- struct dwc3_ep *dep = dwc->eps[(num << 1) | 1];
- int mult = 1;
- int tmp;
-
- if (!(dep->flags & DWC3_EP_ENABLED))
- continue;
-
- if (usb_endpoint_xfer_bulk(dep->endpoint.desc)
- || usb_endpoint_xfer_isoc(dep->endpoint.desc))
- mult = 3;
-
- /*
- * REVISIT: the following assumes we will always have enough
- * space available on the FIFO RAM for all possible use cases.
- * Make sure that's true somehow and change FIFO allocation
- * accordingly.
- *
- * If we have Bulk or Isochronous endpoints, we want
- * them to be able to be very, very fast. So we're giving
- * those endpoints a fifo_size which is enough for 3 full
- * packets
- */
- tmp = mult * (dep->endpoint.maxpacket + mdwidth);
- tmp += mdwidth;
-
- fifo_size = DIV_ROUND_UP(tmp, mdwidth);
-
- fifo_size |= (last_fifo_depth << 16);
-
- dwc3_trace(trace_dwc3_gadget, "%s: Fifo Addr %04x Size %d",
- dep->name, last_fifo_depth, fifo_size & 0xffff);
-
- dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num), fifo_size);
-
- last_fifo_depth += (fifo_size & 0xffff);
- }
-
- return 0;
-}
-
void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
int status)
{
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index 2bb4d3a..aaa6f00 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -23,7 +23,6 @@
struct dwc3_platform_data {
enum usb_device_speed maximum_speed;
enum usb_dr_mode dr_mode;
- bool tx_fifo_resize;
bool usb3_lpm_capable;
unsigned is_utmi_l1_suspend:1;
--
cgit v0.12

View file

@ -0,0 +1,273 @@
From 660e9bde74d6915227d7ee3485b11e5f52637b26 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@linux.intel.com>
Date: Wed, 30 Mar 2016 09:26:24 +0300
Subject: usb: dwc3: remove num_event_buffers
We never, ever route any of the other event buffers
so we might as well drop support for them.
Until someone has a real, proper benefit for
multiple event buffers, we will rely on a single
one. This also helps reduce memory footprint of
dwc3.ko which won't allocate memory for the extra
event buffers.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
---
drivers/usb/dwc3/core.c | 81 +++++++++++++++++++----------------------------
drivers/usb/dwc3/core.h | 2 --
drivers/usb/dwc3/gadget.c | 38 +++++++---------------
3 files changed, 44 insertions(+), 77 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 67d183a..9e5c57c7 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -203,13 +203,10 @@ static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc,
static void dwc3_free_event_buffers(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
- int i;
- for (i = 0; i < dwc->num_event_buffers; i++) {
- evt = dwc->ev_buffs[i];
- if (evt)
- dwc3_free_one_event_buffer(dwc, evt);
- }
+ evt = dwc->ev_buffs[0];
+ if (evt)
+ dwc3_free_one_event_buffer(dwc, evt);
}
/**
@@ -222,27 +219,19 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
*/
static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
{
- int num;
- int i;
-
- num = DWC3_NUM_INT(dwc->hwparams.hwparams1);
- dwc->num_event_buffers = num;
+ struct dwc3_event_buffer *evt;
- dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num,
+ dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs),
GFP_KERNEL);
if (!dwc->ev_buffs)
return -ENOMEM;
- for (i = 0; i < num; i++) {
- struct dwc3_event_buffer *evt;
-
- evt = dwc3_alloc_one_event_buffer(dwc, length);
- if (IS_ERR(evt)) {
- dev_err(dwc->dev, "can't allocate event buffer\n");
- return PTR_ERR(evt);
- }
- dwc->ev_buffs[i] = evt;
+ evt = dwc3_alloc_one_event_buffer(dwc, length);
+ if (IS_ERR(evt)) {
+ dev_err(dwc->dev, "can't allocate event buffer\n");
+ return PTR_ERR(evt);
}
+ dwc->ev_buffs[0] = evt;
return 0;
}
@@ -256,25 +245,22 @@ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
static int dwc3_event_buffers_setup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
- int n;
- for (n = 0; n < dwc->num_event_buffers; n++) {
- evt = dwc->ev_buffs[n];
- dwc3_trace(trace_dwc3_core,
- "Event buf %p dma %08llx length %d\n",
- evt->buf, (unsigned long long) evt->dma,
- evt->length);
-
- evt->lpos = 0;
-
- dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n),
- lower_32_bits(evt->dma));
- dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n),
- upper_32_bits(evt->dma));
- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n),
- DWC3_GEVNTSIZ_SIZE(evt->length));
- dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
- }
+ evt = dwc->ev_buffs[0];
+ dwc3_trace(trace_dwc3_core,
+ "Event buf %p dma %08llx length %d\n",
+ evt->buf, (unsigned long long) evt->dma,
+ evt->length);
+
+ evt->lpos = 0;
+
+ dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0),
+ lower_32_bits(evt->dma));
+ dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0),
+ upper_32_bits(evt->dma));
+ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0),
+ DWC3_GEVNTSIZ_SIZE(evt->length));
+ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
return 0;
}
@@ -282,19 +268,16 @@ static int dwc3_event_buffers_setup(struct dwc3 *dwc)
static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
- int n;
- for (n = 0; n < dwc->num_event_buffers; n++) {
- evt = dwc->ev_buffs[n];
+ evt = dwc->ev_buffs[0];
- evt->lpos = 0;
+ evt->lpos = 0;
- dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0);
- dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0);
- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), DWC3_GEVNTSIZ_INTMASK
- | DWC3_GEVNTSIZ_SIZE(0));
- dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
- }
+ dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0), 0);
+ dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), 0);
+ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), DWC3_GEVNTSIZ_INTMASK
+ | DWC3_GEVNTSIZ_SIZE(0));
+ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
}
static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 4ea4b51..be03999 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -667,7 +667,6 @@ struct dwc3_scratchpad_array {
* @regs: base address for our registers
* @regs_size: address space size
* @nr_scratch: number of scratch buffers
- * @num_event_buffers: calculated number of event buffers
* @u1u2: only used on revisions <1.83a for workaround
* @maximum_speed: maximum speed requested (mainly for testing purposes)
* @revision: revision register contents
@@ -778,7 +777,6 @@ struct dwc3 {
u32 gctl;
u32 nr_scratch;
- u32 num_event_buffers;
u32 u1u2;
u32 maximum_speed;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index e6bd3a9..5e6a495 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2602,14 +2602,14 @@ static void dwc3_process_event_entry(struct dwc3 *dwc,
}
}
-static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
+static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
irqreturn_t ret = IRQ_NONE;
int left;
u32 reg;
- evt = dwc->ev_buffs[buf];
+ evt = dwc->ev_buffs[0];
left = evt->count;
if (!(evt->flags & DWC3_EVENT_PENDING))
@@ -2634,7 +2634,7 @@ static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
left -= 4;
- dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4);
+ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 4);
}
evt->count = 0;
@@ -2642,9 +2642,9 @@ static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
ret = IRQ_HANDLED;
/* Unmask interrupt */
- reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf));
+ reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(0));
reg &= ~DWC3_GEVNTSIZ_INTMASK;
- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg);
+ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), reg);
return ret;
}
@@ -2654,27 +2654,23 @@ static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc)
struct dwc3 *dwc = _dwc;
unsigned long flags;
irqreturn_t ret = IRQ_NONE;
- int i;
spin_lock_irqsave(&dwc->lock, flags);
-
- for (i = 0; i < dwc->num_event_buffers; i++)
- ret |= dwc3_process_event_buf(dwc, i);
-
+ ret = dwc3_process_event_buf(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
return ret;
}
-static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc, u32 buf)
+static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
u32 count;
u32 reg;
- evt = dwc->ev_buffs[buf];
+ evt = dwc->ev_buffs[0];
- count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf));
+ count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
count &= DWC3_GEVNTCOUNT_MASK;
if (!count)
return IRQ_NONE;
@@ -2683,9 +2679,9 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc, u32 buf)
evt->flags |= DWC3_EVENT_PENDING;
/* Mask interrupt */
- reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf));
+ reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(0));
reg |= DWC3_GEVNTSIZ_INTMASK;
- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg);
+ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), reg);
return IRQ_WAKE_THREAD;
}
@@ -2693,18 +2689,8 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc, u32 buf)
static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
{
struct dwc3 *dwc = _dwc;
- int i;
- irqreturn_t ret = IRQ_NONE;
-
- for (i = 0; i < dwc->num_event_buffers; i++) {
- irqreturn_t status;
- status = dwc3_check_event_buf(dwc, i);
- if (status == IRQ_WAKE_THREAD)
- ret = status;
- }
-
- return ret;
+ return dwc3_check_event_buf(dwc);
}
/**
--
cgit v0.12

View file

@ -0,0 +1,104 @@
From 696c8b1282205caa5206264449f80ef756f14ef7 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@linux.intel.com>
Date: Wed, 30 Mar 2016 09:37:03 +0300
Subject: usb: dwc3: drop ev_buffs array
we will be using a single event buffer and that
renders ev_buffs array unnecessary. Let's remove it
in favor of a single pointer to a single event
buffer.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
---
drivers/usb/dwc3/core.c | 13 ++++---------
drivers/usb/dwc3/core.h | 2 +-
drivers/usb/dwc3/gadget.c | 4 ++--
3 files changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9e5c57c7..05b7ec3 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -204,7 +204,7 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
- evt = dwc->ev_buffs[0];
+ evt = dwc->ev_buf;
if (evt)
dwc3_free_one_event_buffer(dwc, evt);
}
@@ -221,17 +221,12 @@ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
{
struct dwc3_event_buffer *evt;
- dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs),
- GFP_KERNEL);
- if (!dwc->ev_buffs)
- return -ENOMEM;
-
evt = dwc3_alloc_one_event_buffer(dwc, length);
if (IS_ERR(evt)) {
dev_err(dwc->dev, "can't allocate event buffer\n");
return PTR_ERR(evt);
}
- dwc->ev_buffs[0] = evt;
+ dwc->ev_buf = evt;
return 0;
}
@@ -246,7 +241,7 @@ static int dwc3_event_buffers_setup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
- evt = dwc->ev_buffs[0];
+ evt = dwc->ev_buf;
dwc3_trace(trace_dwc3_core,
"Event buf %p dma %08llx length %d\n",
evt->buf, (unsigned long long) evt->dma,
@@ -269,7 +264,7 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
- evt = dwc->ev_buffs[0];
+ evt = dwc->ev_buf;
evt->lpos = 0;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index be03999..df72234a 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -753,7 +753,7 @@ struct dwc3 {
struct platform_device *xhci;
struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM];
- struct dwc3_event_buffer **ev_buffs;
+ struct dwc3_event_buffer *ev_buf;
struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
struct usb_gadget gadget;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 5e6a495..96dfde0 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2609,7 +2609,7 @@ static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc)
int left;
u32 reg;
- evt = dwc->ev_buffs[0];
+ evt = dwc->ev_buf;
left = evt->count;
if (!(evt->flags & DWC3_EVENT_PENDING))
@@ -2668,7 +2668,7 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc)
u32 count;
u32 reg;
- evt = dwc->ev_buffs[0];
+ evt = dwc->ev_buf;
count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
count &= DWC3_GEVNTCOUNT_MASK;
--
cgit v0.12

View file

@ -0,0 +1,71 @@
From 5c4ad318de3b8e8680d654c82a254c4b65243739 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@kernel.org>
Date: Mon, 11 Apr 2016 17:12:34 +0300
Subject: usb: dwc3: core: fix PHY handling during suspend
we need to power off the PHY during suspend and
power it back on during resume.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
[nsekhar@ti.com: fix call to usb_phy_set_suspend() in dwc3_suspend()]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
---
drivers/usb/dwc3/core.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index fa20f5a9..34277ce 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1150,6 +1150,11 @@ static int dwc3_suspend(struct device *dev)
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
+ usb_phy_set_suspend(dwc->usb2_phy, 1);
+ usb_phy_set_suspend(dwc->usb3_phy, 1);
+ WARN_ON(phy_power_off(dwc->usb2_generic_phy) < 0);
+ WARN_ON(phy_power_off(dwc->usb3_generic_phy) < 0);
+
pinctrl_pm_select_sleep_state(dev);
return 0;
@@ -1163,11 +1168,21 @@ static int dwc3_resume(struct device *dev)
pinctrl_pm_select_default_state(dev);
+ usb_phy_set_suspend(dwc->usb2_phy, 0);
+ usb_phy_set_suspend(dwc->usb3_phy, 0);
+ ret = phy_power_on(dwc->usb2_generic_phy);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_power_on(dwc->usb3_generic_phy);
+ if (ret < 0)
+ goto err_usb2phy_power;
+
usb_phy_init(dwc->usb3_phy);
usb_phy_init(dwc->usb2_phy);
ret = phy_init(dwc->usb2_generic_phy);
if (ret < 0)
- return ret;
+ goto err_usb3phy_power;
ret = phy_init(dwc->usb3_generic_phy);
if (ret < 0)
@@ -1200,6 +1215,12 @@ static int dwc3_resume(struct device *dev)
err_usb2phy_init:
phy_exit(dwc->usb2_generic_phy);
+err_usb3phy_power:
+ phy_power_off(dwc->usb3_generic_phy);
+
+err_usb2phy_power:
+ phy_power_off(dwc->usb2_generic_phy);
+
return ret;
}
--
cgit v0.12

View file

@ -0,0 +1,31 @@
From 4c4f106c032ff32b89c98a4d819e68e6e643c14e Mon Sep 17 00:00:00 2001
From: Wei Yongjun <weiyj.lk@gmail.com>
Date: Tue, 26 Jul 2016 14:47:00 +0000
Subject: usb: dwc3: fix missing platform_set_drvdata() in
dwc3_of_simple_probe()
Add missing platform_set_drvdata() in dwc3_of_simple_probe(), otherwise
calling platform_get_drvdata() in remove returns NULL.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
---
drivers/usb/dwc3/dwc3-of-simple.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 9743353..e56d59b 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -61,6 +61,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
if (!simple->clks)
return -ENOMEM;
+ platform_set_drvdata(pdev, simple);
simple->dev = dev;
for (i = 0; i < simple->num_clocks; i++) {
--
cgit v0.12

View file

@ -32,7 +32,7 @@
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -333,6 +333,90 @@
@@ -333,6 +333,88 @@
compatible = "syscon";
reg = <0x01200600 0x100>;
};
@ -94,7 +94,6 @@
+ interrupts = <0 110 0x4>;
+ phys = <&hs_phy_0>, <&ss_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ tx-fifo-resize;
+ dr_mode = "host";
+ };
+ };
@ -116,7 +115,6 @@
+ interrupts = <0 205 0x4>;
+ phys = <&hs_phy_1>, <&ss_phy_1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ tx-fifo-resize;
+ dr_mode = "host";
+ };
+ };