diff --git a/target/linux/adm5120-2.6/config/default b/target/linux/adm5120-2.6/config/default index 0ea8e56e8b..569f66c9b8 100644 --- a/target/linux/adm5120-2.6/config/default +++ b/target/linux/adm5120-2.6/config/default @@ -2,6 +2,7 @@ CONFIG_32BIT=y # CONFIG_64BIT is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_ADM5120_GPIO=y +CONFIG_ADM5120_HARDWARE_SWAB=y CONFIG_ADM5120_NR_UARTS=2 # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig b/target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig new file mode 100644 index 0000000000..1b73a370b4 --- /dev/null +++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig @@ -0,0 +1,16 @@ +if MIPS_ADM5120 + +menu "ADM5120 Implementation Options" + +config PCI_ADM5120 + bool "Enable PCI support" + select PCI + default y + +config ADM5120_HARDWARE_SWAB + bool "Enable hardware accelerated byte-swapping" + default y + +endmenu + +endif diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c index ab96b0f6c9..fea52ffca0 100644 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c +++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c @@ -18,6 +18,7 @@ #include #include +#include #include #include @@ -775,7 +776,7 @@ static void __init adm5120_detect_memsize(void) u32 size, maxsize; volatile u8 *p,*r; u8 t; - + memctrl = SWITCH_READ(SWITCH_REG_MEMCTRL); switch (memctrl & MEMCTRL_SDRS_MASK) { case MEMCTRL_SDRS_4M: @@ -791,7 +792,7 @@ static void __init adm5120_detect_memsize(void) maxsize = 64 << 20; break; } - + /* FIXME: need to disable buffers for both SDRAM bank? */ mem_dbg("checking for %ldMB chip\n",maxsize >> 20); @@ -800,7 +801,7 @@ static void __init adm5120_detect_memsize(void) p = (volatile u8 *)KSEG1ADDR(0); t = *p; for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) { -#if 1 +#if 1 r = (p+size); *p = 0x55; mem_dbg("1st pattern at 0x%lx is 0x%02x\n", size, *r); @@ -818,7 +819,7 @@ static void __init adm5120_detect_memsize(void) mem_dbg("1st pattern at 0x%lx is 0x%02x\n", size, p[size]); if (p[size] != 0x55) continue; - + p[0] = 0xAA; mem_dbg("2nd pattern at 0x%lx is 0x%02x\n", size, p[size]); if (p[size] != 0xAA) @@ -836,13 +837,13 @@ static void __init adm5120_detect_memsize(void) if (size == (32 << 20)) /* if bank size is 32MB, 2nd bank is not supported */ goto out; - + if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0) /* if 2nd bank is not enabled, we are done */ goto out; - + /* - * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip + * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip * are missing. */ mem_dbg("checking second bank\n"); @@ -851,11 +852,11 @@ static void __init adm5120_detect_memsize(void) *p = 0x55; if (*p != 0x55) goto out; - + *p = 0xAA; if (*p != 0xAA) goto out; - + *p = t; if (maxsize != size) { /* adjusting MECTRL register */ @@ -897,11 +898,31 @@ void __init adm5120_info_show(void) printk("Memory size : %ldMB\n", adm5120_memsize >> 20); } +void __init adm5120_swab_test(void) +{ +#if CONFIG_ADM5120_HARDWARE_SWAB + u32 t1,t2; + + t1 = 0x1234; + t2 = swab16(t1); + printk("hardware swab16 test %s, data:0x%04X, result:0x%04X\n", + (t2 == 0x3412) ? "passed" :"failed", t1, t2); + + t1 = 0x12345678; + t2 = swab32(t1); + printk("hardware swab32 test %s, data:0x%08X, result:0x%08X\n", + (t2 == 0x78563412) ? "passed" :"failed", t1, t2); + +#endif /* CONFIG_ADM5120_HARDWARE_SWAB */ +} + void __init adm5120_info_init(void) { + adm5120_detect_cpuinfo(); adm5120_detect_memsize(); adm5120_detect_board(); adm5120_info_show(); + adm5120_swab_test(); } diff --git a/target/linux/adm5120-2.6/patches/001-adm5120.patch b/target/linux/adm5120-2.6/patches/001-adm5120.patch index 8cc60678e0..c14dde345a 100644 --- a/target/linux/adm5120-2.6/patches/001-adm5120.patch +++ b/target/linux/adm5120-2.6/patches/001-adm5120.patch @@ -2,7 +2,7 @@ Index: linux-2.6.21.1/arch/mips/Kconfig =================================================================== --- linux-2.6.21.1.orig/arch/mips/Kconfig +++ linux-2.6.21.1/arch/mips/Kconfig -@@ -16,6 +16,21 @@ choice +@@ -16,6 +16,17 @@ choice prompt "System type" default SGI_IP22 @@ -16,14 +16,18 @@ Index: linux-2.6.21.1/arch/mips/Kconfig + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_32BIT_KERNEL + select GENERIC_GPIO -+ -+config PCI_ADM5120 -+ bool "Add PCI control support for ADM5120" -+ depends on MIPS_ADM5120 && PCI + config MIPS_MTX1 bool "4G Systems MTX-1 board" select DMA_NONCOHERENT +@@ -766,6 +775,7 @@ + + endchoice + ++source "arch/mips/adm5120/Kconfig" + source "arch/mips/ddb5xxx/Kconfig" + source "arch/mips/gt64120/ev64120/Kconfig" + source "arch/mips/jazz/Kconfig" Index: linux-2.6.21.1/arch/mips/Makefile =================================================================== --- linux-2.6.21.1.orig/arch/mips/Makefile diff --git a/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch b/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch new file mode 100644 index 0000000000..a71dba2d03 --- /dev/null +++ b/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch @@ -0,0 +1,38 @@ +--- linux-2.6.19.2/include/asm-mips/byteorder.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.new/include/asm-mips/byteorder.h 2007-05-16 21:14:47.000000000 +0200 +@@ -58,6 +58,35 @@ + + #endif /* CONFIG_CPU_MIPSR2 */ + ++#ifdef CONFIG_ADM5120_HARDWARE_SWAB ++ ++static __inline__ __attribute_const__ __u16 ___adm5120__swab16(__u16 x) ++{ ++ __asm__ ( ++ " sw %2, 0xC8(%1) \n" ++ " lhu %0, 0xCC(%1) \n" ++ : "=r" (x) ++ : "r" (0xB2000000), "r" (x)); ++ ++ return x; ++} ++ ++static __inline__ __attribute_const__ __u32 ___adm5120__swab32(__u32 x) ++{ ++ __asm__ ( ++ " sw %2, 0xC8(%1) \n" ++ " lw %0, 0xCC(%1) \n" ++ : "=r" (x) ++ : "r" (0xB2000000), "r" (x)); ++ ++ return x; ++} ++ ++#define __arch__swab16(x) ___adm5120__swab16(x) ++#define __arch__swab32(x) ___adm5120__swab32(x) ++ ++#endif /* CONFIG_ADM5120_HARDWARE_SWAB */ ++ + #if !defined(__STRICT_ANSI__) || defined(__KERNEL__) + # define __BYTEORDER_HAS_U64__ + # define __SWAB_64_THRU_32__ diff --git a/target/linux/adm5120eb-2.6/config/default b/target/linux/adm5120eb-2.6/config/default index 519b83f428..b77bebb60d 100644 --- a/target/linux/adm5120eb-2.6/config/default +++ b/target/linux/adm5120eb-2.6/config/default @@ -2,6 +2,7 @@ CONFIG_32BIT=y # CONFIG_64BIT is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_ADM5120_GPIO=y +CONFIG_ADM5120_HARDWARE_SWAB=y CONFIG_ADM5120_NR_UARTS=2 # CONFIG_ATM_DRIVERS is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set