ramips: add support for TP-Link TL-MR3020 v3
TP-Link TL-MR3020 v3 is a pocket-size router based on MediaTek MT7628N. This PR is based on the work of @meyergru[1], with his permission. Specification: - MediaTek MT7628N/N (575 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz - 1x 10/100 Mbps Ethernet Flash instruction: The only way to flash the image in TL-MR3020 v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.225/24 and tftp server. 2. Rename "openwrt-ramips-mt76x8-tplink_tl-mr3020-v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with the LAN port, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. [1] https://github.com/meyergru/lede-source/commits/TL-MR3020-V3 Signed-off-by: Carlo Nel <carlojnel@gmail.com>
This commit is contained in:
parent
9c26def64a
commit
6bbb220255
5 changed files with 165 additions and 0 deletions
|
@ -404,6 +404,11 @@ tplink,tl-wa801nd-v5)
|
|||
ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt"
|
||||
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
|
||||
;;
|
||||
tplink,tl-mr3020-v3)
|
||||
set_usb_led "$boardname:green:3g"
|
||||
set_wifi_led "$boardname:green:wlan"
|
||||
ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
|
||||
;;
|
||||
tplink,tl-mr3420-v5|\
|
||||
tplink,tl-wr842n-v5)
|
||||
set_usb_led "$boardname:green:usb"
|
||||
|
|
|
@ -150,6 +150,7 @@ ramips_setup_interfaces()
|
|||
pbr-d1|\
|
||||
ravpower,wd03|\
|
||||
tama,w06|\
|
||||
tplink,tl-mr3020-v3|\
|
||||
u25awf-h1|\
|
||||
wli-tx4-ag300n|\
|
||||
wmdr-143n|\
|
||||
|
|
|
@ -265,6 +265,7 @@ platform_check_image() {
|
|||
tplink,c20-v1|\
|
||||
tplink,c20-v4|\
|
||||
tplink,c50-v3|\
|
||||
tplink,tl-mr3020-v3|\
|
||||
tplink,tl-mr3420-v5|\
|
||||
tplink,tl-wa801nd-v5|\
|
||||
tplink,tl-wr842n-v5|\
|
||||
|
|
144
target/linux/ramips/dts/TL-MR3020V3.dts
Normal file
144
target/linux/ramips/dts/TL-MR3020V3.dts
Normal file
|
@ -0,0 +1,144 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "tplink,tl-mr3020-v3", "mediatek,mt7628an-soc";
|
||||
model = "TP-Link TL-MR3020 v3";
|
||||
|
||||
aliases {
|
||||
led-status = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x4000000>;
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
modec1 {
|
||||
label = "sw1";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
};
|
||||
|
||||
modec2 {
|
||||
label = "sw2";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_1>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "tl-mr3020-v3:green:power";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "tl-mr3020-v3:green:3g";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "tl-mr3020-v3:green:wlan";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "tl-mr3020-v3:green:wps";
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "tl-mr3020-v3:green:lan";
|
||||
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
m25p,chunked-io = <32>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "boot";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "firmware";
|
||||
reg = <0x20000 0x7a0000>;
|
||||
};
|
||||
|
||||
partition@7c0000 {
|
||||
label = "config";
|
||||
reg = <0x7c0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@7d0000 {
|
||||
label = "factory";
|
||||
reg = <0x7d0000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "i2s", "refclk", "wdt", "p2led_an", "p1led_an", "p0led_an", "wled_an";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-mac-address = <&factory 0xf100>;
|
||||
mediatek,mtd-eeprom = <&factory 0x20000>;
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0xf100>;
|
||||
};
|
|
@ -231,6 +231,20 @@ define Device/tplink_c50-v3
|
|||
endef
|
||||
TARGET_DEVICES += tplink_c50-v3
|
||||
|
||||
define Device/tplink_tl-mr3020-v3
|
||||
$(Device/tplink)
|
||||
DTS := TL-MR3020V3
|
||||
IMAGE_SIZE := 7808k
|
||||
DEVICE_TITLE := TP-Link TL-MR3020 v3
|
||||
TPLINK_FLASHLAYOUT := 8Mmtk
|
||||
TPLINK_HWID := 0x30200003
|
||||
TPLINK_HWREV := 0x3
|
||||
TPLINK_HWREVADD := 0x3
|
||||
TPLINK_HVERSION := 3
|
||||
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
||||
endef
|
||||
TARGET_DEVICES += tplink_tl-mr3020-v3
|
||||
|
||||
define Device/tplink_tl-mr3420-v5
|
||||
$(Device/tplink)
|
||||
DTS := TL-MR3420V5
|
||||
|
|
Loading…
Reference in a new issue