at91: Remove u-boot from platform images folder
Removes the bootloader from the images section as its now in packages/boot with the others. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
This commit is contained in:
Ben Whitten
Jo-Philipp Wich
parent
6b31c4cb38
commit
6638946f99
7 changed files with 0 additions and 836 deletions
|
|
@ -3,33 +3,6 @@ config AT91_DFBOOT
|
||||||
depends on TARGET_at91
|
depends on TARGET_at91
|
||||||
default n
|
default n
|
||||||
|
|
||||||
config AT91_UBOOT
|
|
||||||
bool "Build U-Boot bootloader"
|
|
||||||
depends on TARGET_at91
|
|
||||||
default n
|
|
||||||
|
|
||||||
config UBOOT_TARGET
|
|
||||||
string "U-Boot target board"
|
|
||||||
depends on AT91_UBOOT
|
|
||||||
default "netusg20"
|
|
||||||
help
|
|
||||||
For all supported boards there are ready-to-use default
|
|
||||||
configurations available; just type "<board_name>".
|
|
||||||
|
|
||||||
config UBOOT_IPADDR
|
|
||||||
string "IP Address for U-Boot"
|
|
||||||
depends on AT91_UBOOT
|
|
||||||
default "192.168.0.178"
|
|
||||||
help
|
|
||||||
IP address of device to be used in U-Boot
|
|
||||||
|
|
||||||
config UBOOT_SERVERIP
|
|
||||||
string "IP Address of TFTP server"
|
|
||||||
depends on AT91_UBOOT
|
|
||||||
default "192.168.0.232"
|
|
||||||
help
|
|
||||||
IP address of TFTP server for U-Boot
|
|
||||||
|
|
||||||
config FLEXIBITY_ROOT
|
config FLEXIBITY_ROOT
|
||||||
bool "Build Flexibity RootFS (with embedded kernel)"
|
bool "Build Flexibity RootFS (with embedded kernel)"
|
||||||
depends on TARGET_at91_flexibity
|
depends on TARGET_at91_flexibity
|
||||||
|
|
|
||||||
|
|
@ -13,16 +13,6 @@ UBI_OPTS = -m 2048 -p 128KiB -s 512
|
||||||
AT91SAMA5D3XPLAINED_UBIFS_OPTS = -m 2048 -e 124KiB -c 2048
|
AT91SAMA5D3XPLAINED_UBIFS_OPTS = -m 2048 -e 124KiB -c 2048
|
||||||
AT91SAMA5D3XPLAINED_UBI_OPTS = -m 2048 -p 128KiB -s 2048
|
AT91SAMA5D3XPLAINED_UBI_OPTS = -m 2048 -p 128KiB -s 2048
|
||||||
|
|
||||||
define Build/Clean
|
|
||||||
$(MAKE) -C u-boot clean
|
|
||||||
endef
|
|
||||||
|
|
||||||
define Build/Compile
|
|
||||||
if [ $(CONFIG_AT91_UBOOT) ]; then \
|
|
||||||
$(MAKE) -C u-boot compile; \
|
|
||||||
fi
|
|
||||||
endef
|
|
||||||
|
|
||||||
define Image/Prepare
|
define Image/Prepare
|
||||||
cp $(LINUX_DIR)/arch/arm/boot/Image $(KDIR)/Image
|
cp $(LINUX_DIR)/arch/arm/boot/Image $(KDIR)/Image
|
||||||
cp $(LINUX_DIR)/arch/arm/boot/zImage $(KDIR)/zImage
|
cp $(LINUX_DIR)/arch/arm/boot/zImage $(KDIR)/zImage
|
||||||
|
|
|
||||||
|
|
@ -1,51 +0,0 @@
|
||||||
#
|
|
||||||
# Copyright (C) 2006 OpenWrt.org
|
|
||||||
#
|
|
||||||
# This is free software, licensed under the GNU General Public License v2.
|
|
||||||
# See /LICENSE for more information.
|
|
||||||
#
|
|
||||||
|
|
||||||
include $(TOPDIR)/rules.mk
|
|
||||||
include $(INCLUDE_DIR)/kernel.mk
|
|
||||||
|
|
||||||
PKG_NAME:=u-boot
|
|
||||||
PKG_VERSION:=2010.06
|
|
||||||
PKG_RELEASE:=1
|
|
||||||
|
|
||||||
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
|
|
||||||
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
|
|
||||||
PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot
|
|
||||||
PKG_MD5SUM:=
|
|
||||||
PKG_CAT:=bzcat
|
|
||||||
|
|
||||||
include $(INCLUDE_DIR)/package.mk
|
|
||||||
|
|
||||||
UBOOT_CONFIG=$(call qstrip,$(CONFIG_UBOOT_TARGET))
|
|
||||||
LAN_IP=$(call qstrip,$(CONFIG_UBOOT_IPADDR))
|
|
||||||
LAN_SERVERIP=$(call qstrip,$(CONFIG_UBOOT_SERVERIP))
|
|
||||||
|
|
||||||
define Build/Compile
|
|
||||||
$(MAKE) -C $(PKG_BUILD_DIR) $(UBOOT_CONFIG)_config
|
|
||||||
export CROSS_COMPILE=$(TARGET_CROSS); \
|
|
||||||
export LAN_IP=$(LAN_IP); \
|
|
||||||
export LAN_SERVERIP=$(LAN_SERVERIP); \
|
|
||||||
$(MAKE) -C $(PKG_BUILD_DIR)
|
|
||||||
mkdir -p $(PKG_BUILD_DIR)/ubclient
|
|
||||||
$(CP) ./ubclient/* $(PKG_BUILD_DIR)/ubclient
|
|
||||||
export LAN_IP=$(LAN_IP); \
|
|
||||||
export LAN_SERVERIP=$(LAN_SERVERIP); \
|
|
||||||
#$(MAKE) -C $(PKG_BUILD_DIR)/ubclient \
|
|
||||||
# $(TARGET_CONFIGURE_OPTS) \
|
|
||||||
# CFLAGS="$(TARGET_CFLAGS) -Dtarget_$(BOARD)=1"
|
|
||||||
endef
|
|
||||||
|
|
||||||
define Build/InstallDev
|
|
||||||
dd if=$(PKG_BUILD_DIR)/u-boot.bin of=$(PKG_BUILD_DIR)/u-boot.block bs=232k count=1 conv=sync
|
|
||||||
# $(INSTALL_DIR) $(STAGING_DIR)/ubclient/sbin
|
|
||||||
# $(INSTALL_BIN) $(PKG_BUILD_DIR)/ubclient/ubpar $(STAGING_DIR)/ubclient/sbin/
|
|
||||||
# $(CP) $(PKG_BUILD_DIR)/ubclient/ubpar ../../base-files/sbin
|
|
||||||
mkdir -p $(BIN_DIR)/
|
|
||||||
cp $(PKG_BUILD_DIR)/u-boot.bin $(BIN_DIR)/u-boot.$(PKG_VERSION).bin
|
|
||||||
endef
|
|
||||||
|
|
||||||
$(eval $(call Build/DefaultTargets))
|
|
||||||
|
|
@ -1,574 +0,0 @@
|
||||||
Add support for the NetusG20 board by Acmesystems srl.
|
|
||||||
This board is based on AT91SAM9G20 SoC.
|
|
||||||
|
|
||||||
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>
|
|
||||||
---
|
|
||||||
MAKEALL | 1 +
|
|
||||||
Makefile | 3 +
|
|
||||||
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 +
|
|
||||||
board/acmesystems/netusg20/Makefile | 56 +++++++
|
|
||||||
board/acmesystems/netusg20/config.mk | 1 +
|
|
||||||
board/acmesystems/netusg20/led.c | 40 +++++
|
|
||||||
board/acmesystems/netusg20/netusg20.c | 152 +++++++++++++++++
|
|
||||||
board/acmesystems/netusg20/partition.c | 39 +++++
|
|
||||||
include/configs/netusg20.h | 181 +++++++++++++++++++++
|
|
||||||
9 files changed, 478 insertions(+), 0 deletions(-)
|
|
||||||
create mode 100644 board/acmesystems/netusg20/Makefile
|
|
||||||
create mode 100644 board/acmesystems/netusg20/config.mk
|
|
||||||
create mode 100644 board/acmesystems/netusg20/led.c
|
|
||||||
create mode 100644 board/acmesystems/netusg20/netusg20.c
|
|
||||||
create mode 100644 board/acmesystems/netusg20/partition.c
|
|
||||||
create mode 100644 include/configs/netusg20.h
|
|
||||||
|
|
||||||
diff --git a/MAKEALL b/MAKEALL
|
|
||||||
index d6d5f5b..60e36e1 100755
|
|
||||||
--- a/MAKEALL
|
|
||||||
+++ b/MAKEALL
|
|
||||||
@@ -684,6 +684,7 @@ LIST_at91=" \
|
|
||||||
meesc \
|
|
||||||
mp2usb \
|
|
||||||
m501sk \
|
|
||||||
+ netusg20 \
|
|
||||||
otc570 \
|
|
||||||
pm9261 \
|
|
||||||
pm9263 \
|
|
||||||
diff --git a/Makefile b/Makefile
|
|
||||||
index 87d5214..b73659f 100644
|
|
||||||
--- a/Makefile
|
|
||||||
+++ b/Makefile
|
|
||||||
@@ -2867,6 +2867,9 @@ at91sam9g45ekes_config : unconfig
|
|
||||||
fi;
|
|
||||||
@$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
|
|
||||||
|
|
||||||
+netusg20_config: unconfig
|
|
||||||
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs netusg20 acmesystems at91
|
|
||||||
+
|
|
||||||
otc570_config : unconfig
|
|
||||||
@$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91
|
|
||||||
|
|
||||||
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
|
|
||||||
index 77d49ab..87ec531 100644
|
|
||||||
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
|
|
||||||
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
|
|
||||||
@@ -59,7 +59,12 @@ void at91_serial3_hw_init(void)
|
|
||||||
{
|
|
||||||
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
|
|
||||||
|
|
||||||
+#ifdef CONFIG_NETUSG20
|
|
||||||
+ /* pull-up active on DRXD*/
|
|
||||||
+ at91_set_a_periph(AT91_PIO_PORTB, 14, 1);
|
|
||||||
+#else
|
|
||||||
at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* DRXD */
|
|
||||||
+#endif
|
|
||||||
at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */
|
|
||||||
writel(1 << AT91_ID_SYS, &pmc->pcer);
|
|
||||||
}
|
|
||||||
diff --git a/board/acmesystems/netusg20/Makefile b/board/acmesystems/netusg20/Makefile
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000..31589fd
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/board/acmesystems/netusg20/Makefile
|
|
||||||
@@ -0,0 +1,56 @@
|
|
||||||
+#
|
|
||||||
+# (C) Copyright 2003-2008
|
|
||||||
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
||||||
+#
|
|
||||||
+# (C) Copyright 2008
|
|
||||||
+# Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
||||||
+# Lead Tech Design <www.leadtechdesign.com>
|
|
||||||
+#
|
|
||||||
+# See file CREDITS for list of people who contributed to this
|
|
||||||
+# project.
|
|
||||||
+#
|
|
||||||
+# This program is free software; you can redistribute it and/or
|
|
||||||
+# modify it under the terms of the GNU General Public License as
|
|
||||||
+# published by the Free Software Foundation; either version 2 of
|
|
||||||
+# the License, or (at your option) any later version.
|
|
||||||
+#
|
|
||||||
+# This program is distributed in the hope that it will be useful,
|
|
||||||
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
+# GNU General Public License for more details.
|
|
||||||
+#
|
|
||||||
+# You should have received a copy of the GNU General Public License
|
|
||||||
+# along with this program; if not, write to the Free Software
|
|
||||||
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
||||||
+# MA 02111-1307 USA
|
|
||||||
+#
|
|
||||||
+
|
|
||||||
+include $(TOPDIR)/config.mk
|
|
||||||
+
|
|
||||||
+LIB = $(obj)lib$(BOARD).a
|
|
||||||
+
|
|
||||||
+COBJS-y += netusg20.o
|
|
||||||
+COBJS-y += led.o
|
|
||||||
+COBJS-y += partition.o
|
|
||||||
+
|
|
||||||
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
|
|
||||||
+OBJS := $(addprefix $(obj),$(COBJS-y))
|
|
||||||
+SOBJS := $(addprefix $(obj),$(SOBJS))
|
|
||||||
+
|
|
||||||
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
|
||||||
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
|
|
||||||
+
|
|
||||||
+clean:
|
|
||||||
+ rm -f $(SOBJS) $(OBJS)
|
|
||||||
+
|
|
||||||
+distclean: clean
|
|
||||||
+ rm -f $(LIB) core *.bak $(obj).depend
|
|
||||||
+
|
|
||||||
+#########################################################################
|
|
||||||
+
|
|
||||||
+# defines $(obj).depend target
|
|
||||||
+include $(SRCTREE)/rules.mk
|
|
||||||
+
|
|
||||||
+sinclude $(obj).depend
|
|
||||||
+
|
|
||||||
+#########################################################################
|
|
||||||
diff --git a/board/acmesystems/netusg20/config.mk b/board/acmesystems/netusg20/config.mk
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000..ff2cfd1
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/board/acmesystems/netusg20/config.mk
|
|
||||||
@@ -0,0 +1 @@
|
|
||||||
+TEXT_BASE = 0x23f00000
|
|
||||||
diff --git a/board/acmesystems/netusg20/led.c b/board/acmesystems/netusg20/led.c
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000..1016b98
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/board/acmesystems/netusg20/led.c
|
|
||||||
@@ -0,0 +1,40 @@
|
|
||||||
+/*
|
|
||||||
+ * (C) Copyright 2007-2008
|
|
||||||
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
||||||
+ * Lead Tech Design <www.leadtechdesign.com>
|
|
||||||
+ *
|
|
||||||
+ * See file CREDITS for list of people who contributed to this
|
|
||||||
+ * project.
|
|
||||||
+ *
|
|
||||||
+ * This program is free software; you can redistribute it and/or
|
|
||||||
+ * modify it under the terms of the GNU General Public License as
|
|
||||||
+ * published by the Free Software Foundation; either version 2 of
|
|
||||||
+ * the License, or (at your option) any later version.
|
|
||||||
+ *
|
|
||||||
+ * This program is distributed in the hope that it will be useful,
|
|
||||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
+ * GNU General Public License for more details.
|
|
||||||
+ *
|
|
||||||
+ * You should have received a copy of the GNU General Public License
|
|
||||||
+ * along with this program; if not, write to the Free Software
|
|
||||||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
||||||
+ * MA 02111-1307 USA
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+#include <common.h>
|
|
||||||
+#include <asm/arch/at91sam9260.h>
|
|
||||||
+#include <asm/arch/at91_pmc.h>
|
|
||||||
+#include <asm/arch/gpio.h>
|
|
||||||
+#include <asm/arch/io.h>
|
|
||||||
+
|
|
||||||
+
|
|
||||||
+void coloured_LED_init(void)
|
|
||||||
+{
|
|
||||||
+ /* Enable clock */
|
|
||||||
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
|
|
||||||
+
|
|
||||||
+ at91_set_gpio_output(CONFIG_RED_LED, 1);
|
|
||||||
+
|
|
||||||
+ at91_set_gpio_value(CONFIG_RED_LED, 1);
|
|
||||||
+}
|
|
||||||
diff --git a/board/acmesystems/netusg20/netusg20.c b/board/acmesystems/netusg20/netusg20.c
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000..94b4d4c
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/board/acmesystems/netusg20/netusg20.c
|
|
||||||
@@ -0,0 +1,152 @@
|
|
||||||
+/*
|
|
||||||
+ * (C) Copyright 2007-2008
|
|
||||||
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
||||||
+ * Lead Tech Design <www.leadtechdesign.com>
|
|
||||||
+ *
|
|
||||||
+ * (C) Copyright 2010
|
|
||||||
+ * Claudio Mignanti <c.mignanti@gmail.com>
|
|
||||||
+ *
|
|
||||||
+ * See file CREDITS for list of people who contributed to this
|
|
||||||
+ * project.
|
|
||||||
+ *
|
|
||||||
+ * This program is free software; you can redistribute it and/or
|
|
||||||
+ * modify it under the terms of the GNU General Public License as
|
|
||||||
+ * published by the Free Software Foundation; either version 2 of
|
|
||||||
+ * the License, or (at your option) any later version.
|
|
||||||
+ *
|
|
||||||
+ * This program is distributed in the hope that it will be useful,
|
|
||||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
+ * GNU General Public License for more details.
|
|
||||||
+ *
|
|
||||||
+ * You should have received a copy of the GNU General Public License
|
|
||||||
+ * along with this program; if not, write to the Free Software
|
|
||||||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
||||||
+ * MA 02111-1307 USA
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+#include <common.h>
|
|
||||||
+#include <asm/arch/at91sam9260.h>
|
|
||||||
+#include <asm/arch/at91sam9260_matrix.h>
|
|
||||||
+#include <asm/arch/at91sam9_smc.h>
|
|
||||||
+#include <asm/arch/at91_common.h>
|
|
||||||
+#include <asm/arch/at91_pmc.h>
|
|
||||||
+#include <asm/arch/at91_rstc.h>
|
|
||||||
+#include <asm/arch/gpio.h>
|
|
||||||
+#include <asm/arch/io.h>
|
|
||||||
+#include <asm/arch/hardware.h>
|
|
||||||
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
|
|
||||||
+#include <net.h>
|
|
||||||
+#endif
|
|
||||||
+#include <netdev.h>
|
|
||||||
+
|
|
||||||
+DECLARE_GLOBAL_DATA_PTR;
|
|
||||||
+
|
|
||||||
+/* ------------------------------------------------------------------------- */
|
|
||||||
+/*
|
|
||||||
+ * Miscelaneous platform dependent initialisations
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+#ifdef CONFIG_MACB
|
|
||||||
+static void at91sam9260ek_macb_hw_init(void)
|
|
||||||
+{
|
|
||||||
+ unsigned long rstc;
|
|
||||||
+
|
|
||||||
+ /* Enable clock */
|
|
||||||
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Disable pull-up on:
|
|
||||||
+ * RXDV (PA17) => PHY normal mode (not Test mode)
|
|
||||||
+ * ERX0 (PA14) => PHY ADDR0
|
|
||||||
+ * ERX1 (PA15) => PHY ADDR1
|
|
||||||
+ * ERX2 (PA25) => PHY ADDR2
|
|
||||||
+ * ERX3 (PA26) => PHY ADDR3
|
|
||||||
+ * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
|
|
||||||
+ *
|
|
||||||
+ * PHY has internal pull-down
|
|
||||||
+ */
|
|
||||||
+ writel(pin_to_mask(AT91_PIN_PA14) |
|
|
||||||
+ pin_to_mask(AT91_PIN_PA15) |
|
|
||||||
+ pin_to_mask(AT91_PIN_PA17) |
|
|
||||||
+ pin_to_mask(AT91_PIN_PA25) |
|
|
||||||
+ pin_to_mask(AT91_PIN_PA26) |
|
|
||||||
+ pin_to_mask(AT91_PIN_PA28),
|
|
||||||
+ pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
|
|
||||||
+
|
|
||||||
+ rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
|
|
||||||
+
|
|
||||||
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
|
|
||||||
+
|
|
||||||
+ /* Wait for end hardware reset */
|
|
||||||
+ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
|
|
||||||
+
|
|
||||||
+ /* Restore NRST value */
|
|
||||||
+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
|
|
||||||
+ (rstc) |
|
|
||||||
+ AT91_RSTC_URSTEN);
|
|
||||||
+
|
|
||||||
+ /* Re-enable pull-up */
|
|
||||||
+ writel(pin_to_mask(AT91_PIN_PA14) |
|
|
||||||
+ pin_to_mask(AT91_PIN_PA15) |
|
|
||||||
+ pin_to_mask(AT91_PIN_PA17) |
|
|
||||||
+ pin_to_mask(AT91_PIN_PA25) |
|
|
||||||
+ pin_to_mask(AT91_PIN_PA26) |
|
|
||||||
+ pin_to_mask(AT91_PIN_PA28),
|
|
||||||
+ pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
|
|
||||||
+
|
|
||||||
+ at91_macb_hw_init();
|
|
||||||
+}
|
|
||||||
+#endif
|
|
||||||
+
|
|
||||||
+int board_init(void)
|
|
||||||
+{
|
|
||||||
+ /* Enable Ctrlc */
|
|
||||||
+ console_init_f();
|
|
||||||
+
|
|
||||||
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
|
|
||||||
+
|
|
||||||
+ /* adress of boot parameters */
|
|
||||||
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
||||||
+
|
|
||||||
+ at91_serial_hw_init();
|
|
||||||
+#ifdef CONFIG_HAS_DATAFLASH
|
|
||||||
+ at91_spi0_hw_init((1 << 0) | (1 << 1));
|
|
||||||
+#endif
|
|
||||||
+#ifdef CONFIG_MACB
|
|
||||||
+ at91sam9260ek_macb_hw_init();
|
|
||||||
+#endif
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+int dram_init(void)
|
|
||||||
+{
|
|
||||||
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
|
|
||||||
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+#ifdef CONFIG_RESET_PHY_R
|
|
||||||
+void reset_phy(void)
|
|
||||||
+{
|
|
||||||
+#ifdef CONFIG_MACB
|
|
||||||
+ /*
|
|
||||||
+ * Initialize ethernet HW addr prior to starting Linux,
|
|
||||||
+ * needed for nfsroot
|
|
||||||
+ */
|
|
||||||
+ eth_init(gd->bd);
|
|
||||||
+#endif
|
|
||||||
+}
|
|
||||||
+#endif
|
|
||||||
+
|
|
||||||
+int board_eth_init(bd_t *bis)
|
|
||||||
+{
|
|
||||||
+ int rc = 0;
|
|
||||||
+#ifdef CONFIG_MACB
|
|
||||||
+ rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
|
|
||||||
+#endif
|
|
||||||
+ return rc;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+void show_boot_progress (int val){}
|
|
||||||
diff --git a/board/acmesystems/netusg20/partition.c b/board/acmesystems/netusg20/partition.c
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000..7d79e53
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/board/acmesystems/netusg20/partition.c
|
|
||||||
@@ -0,0 +1,39 @@
|
|
||||||
+/*
|
|
||||||
+ * (C) Copyright 2008
|
|
||||||
+ * Ulf Samuelsson <ulf@atmel.com>
|
|
||||||
+ *
|
|
||||||
+ * This program is free software; you can redistribute it and/or
|
|
||||||
+ * modify it under the terms of the GNU General Public License as
|
|
||||||
+ * published by the Free Software Foundation; either version 2 of
|
|
||||||
+ * the License, or (at your option) any later version.
|
|
||||||
+ *
|
|
||||||
+ * This program is distributed in the hope that it will be useful,
|
|
||||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
+ * GNU General Public License for more details.
|
|
||||||
+ *
|
|
||||||
+ * You should have received a copy of the GNU General Public License
|
|
||||||
+ * along with this program; if not, write to the Free Software
|
|
||||||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
||||||
+ * MA 02111-1307 USA
|
|
||||||
+ *
|
|
||||||
+ */
|
|
||||||
+#include <common.h>
|
|
||||||
+#include <config.h>
|
|
||||||
+#include <asm/hardware.h>
|
|
||||||
+#include <dataflash.h>
|
|
||||||
+
|
|
||||||
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
|
|
||||||
+
|
|
||||||
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
|
|
||||||
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+/*define the area offsets*/
|
|
||||||
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
|
|
||||||
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
|
|
||||||
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
|
|
||||||
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
|
|
||||||
+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
|
|
||||||
+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
|
|
||||||
+};
|
|
||||||
diff --git a/include/configs/netusg20.h b/include/configs/netusg20.h
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000..99b4f12
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/include/configs/netusg20.h
|
|
||||||
@@ -0,0 +1,181 @@
|
|
||||||
+/*
|
|
||||||
+ * (C) Copyright 2007-2008
|
|
||||||
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
||||||
+ * Lead Tech Design <www.leadtechdesign.com>
|
|
||||||
+ *
|
|
||||||
+ * Configuation settings for the NetusG20 boards.
|
|
||||||
+ *
|
|
||||||
+ * See file CREDITS for list of people who contributed to this
|
|
||||||
+ * project.
|
|
||||||
+ *
|
|
||||||
+ * This program is free software; you can redistribute it and/or
|
|
||||||
+ * modify it under the terms of the GNU General Public License as
|
|
||||||
+ * published by the Free Software Foundation; either version 2 of
|
|
||||||
+ * the License, or (at your option) any later version.
|
|
||||||
+ *
|
|
||||||
+ * This program is distributed in the hope that it will be useful,
|
|
||||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
+ * GNU General Public License for more details.
|
|
||||||
+ *
|
|
||||||
+ * You should have received a copy of the GNU General Public License
|
|
||||||
+ * along with this program; if not, write to the Free Software
|
|
||||||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
||||||
+ * MA 02111-1307 USA
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+#ifndef __CONFIG_H
|
|
||||||
+#define __CONFIG_H
|
|
||||||
+
|
|
||||||
+#define CONFIG_AT91_LEGACY
|
|
||||||
+
|
|
||||||
+/* ARM asynchronous clock */
|
|
||||||
+#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
|
|
||||||
+#define CONFIG_SYS_HZ 1000
|
|
||||||
+
|
|
||||||
+#define CONFIG_DISPLAY_CPUINFO
|
|
||||||
+
|
|
||||||
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
|
|
||||||
+#define CONFIG_AT91SAM9G20 1 /* It's an Atmel AT91SAM9G20 SoC*/
|
|
||||||
+#define CONFIG_NETUSG20 1
|
|
||||||
+
|
|
||||||
+#define CONFIG_ARCH_CPU_INIT
|
|
||||||
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
|
||||||
+
|
|
||||||
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
||||||
+#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
||||||
+#define CONFIG_INITRD_TAG 1
|
|
||||||
+
|
|
||||||
+#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
||||||
+#define CONFIG_SKIP_RELOCATE_UBOOT
|
|
||||||
+
|
|
||||||
+/*
|
|
||||||
+ * Hardware drivers
|
|
||||||
+ */
|
|
||||||
+#define CONFIG_AT91_GPIO 1
|
|
||||||
+#define CONFIG_ATMEL_USART 1
|
|
||||||
+#undef CONFIG_USART0
|
|
||||||
+#undef CONFIG_USART1
|
|
||||||
+#undef CONFIG_USART2
|
|
||||||
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
|
|
||||||
+
|
|
||||||
+/* LED */
|
|
||||||
+#define CONFIG_AT91_LED
|
|
||||||
+#define CONFIG_RED_LED AT91_PIN_PA9 /* this is the power led */
|
|
||||||
+#define CONFIG_GREEN_LED AT91_PIN_PA6 /* this is the user led */
|
|
||||||
+
|
|
||||||
+#define CONFIG_BOOTDELAY 3
|
|
||||||
+
|
|
||||||
+/*
|
|
||||||
+ * BOOTP options
|
|
||||||
+ */
|
|
||||||
+#define CONFIG_BOOTP_BOOTFILESIZE 1
|
|
||||||
+#define CONFIG_BOOTP_BOOTPATH 1
|
|
||||||
+#define CONFIG_BOOTP_GATEWAY 1
|
|
||||||
+#define CONFIG_BOOTP_HOSTNAME 1
|
|
||||||
+
|
|
||||||
+/*
|
|
||||||
+ * Command line configuration.
|
|
||||||
+ */
|
|
||||||
+#include <config_cmd_default.h>
|
|
||||||
+#undef CONFIG_CMD_BDI
|
|
||||||
+#undef CONFIG_CMD_FPGA
|
|
||||||
+#undef CONFIG_CMD_IMI
|
|
||||||
+#undef CONFIG_CMD_IMLS
|
|
||||||
+#undef CONFIG_CMD_LOADS
|
|
||||||
+#undef CONFIG_CMD_SOURCE
|
|
||||||
+
|
|
||||||
+#define CONFIG_CMD_PING 1
|
|
||||||
+#define CONFIG_CMD_DHCP 1
|
|
||||||
+#define CONFIG_CMD_USB 1
|
|
||||||
+
|
|
||||||
+/* SDRAM */
|
|
||||||
+#define CONFIG_NR_DRAM_BANKS 1
|
|
||||||
+#define PHYS_SDRAM 0x20000000
|
|
||||||
+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
|
|
||||||
+
|
|
||||||
+/* DataFlash */
|
|
||||||
+#define CONFIG_ATMEL_DATAFLASH_SPI
|
|
||||||
+#define CONFIG_HAS_DATAFLASH 1
|
|
||||||
+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
|
|
||||||
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
|
|
||||||
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
|
|
||||||
+#define AT91_SPI_CLK 15000000
|
|
||||||
+
|
|
||||||
+#define DATAFLASH_TCSS (0x22 << 16)
|
|
||||||
+#define DATAFLASH_TCHS (0x1 << 24)
|
|
||||||
+
|
|
||||||
+/* no NAND flash on this board*/
|
|
||||||
+#define CONFIG_SYS_NO_FLASH
|
|
||||||
+
|
|
||||||
+/* Ethernet */
|
|
||||||
+#define CONFIG_MACB 1
|
|
||||||
+#define CONFIG_RMII 1
|
|
||||||
+#define CONFIG_NET_MULTI 1
|
|
||||||
+#define CONFIG_NET_RETRY_COUNT 20
|
|
||||||
+#define CONFIG_RESET_PHY_R 1
|
|
||||||
+
|
|
||||||
+/* MMC */
|
|
||||||
+#define CONFIG_MMC
|
|
||||||
+#define CONFIG_CMD_MMC
|
|
||||||
+#define CONFIG_ATMEL_MCI
|
|
||||||
+#define CONFIG_CMD_AUTOSCRIPT
|
|
||||||
+#define CONFIG_CMD_IMI
|
|
||||||
+#define CONFIG_CMD_SOURCE
|
|
||||||
+
|
|
||||||
+#define MMCI_BASE 0xFFFA8000
|
|
||||||
+
|
|
||||||
+/* USB */
|
|
||||||
+#define CONFIG_USB_ATMEL
|
|
||||||
+#define CONFIG_USB_OHCI_NEW 1
|
|
||||||
+#define CONFIG_DOS_PARTITION 1
|
|
||||||
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
|
||||||
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */
|
|
||||||
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
|
|
||||||
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
||||||
+#define CONFIG_USB_STORAGE 1
|
|
||||||
+
|
|
||||||
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
|
||||||
+
|
|
||||||
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
|
|
||||||
+#define CONFIG_SYS_MEMTEST_END 0x23e00000
|
|
||||||
+
|
|
||||||
+/* Filesystem */
|
|
||||||
+#define CONFIG_CMD_FAT 1
|
|
||||||
+#define CONFIG_CMD_EXT2 1
|
|
||||||
+
|
|
||||||
+/* bootstrap + u-boot + env + linux in dataflash on CS1 */
|
|
||||||
+#define CONFIG_ENV_IS_IN_DATAFLASH 1
|
|
||||||
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
|
|
||||||
+#define CONFIG_ENV_OFFSET 0x4200
|
|
||||||
+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
|
|
||||||
+#define CONFIG_ENV_SIZE 0x4200
|
|
||||||
+#define CONFIG_BOOTCOMMAND "mmc init; sleep 1; " \
|
|
||||||
+ "ext2load mmc 0 0x20000000 uImage; " \
|
|
||||||
+ "source 0x20000000"
|
|
||||||
+#define CONFIG_BOOTARGS "mem=64M console=ttyS0,115200 " \
|
|
||||||
+ "root=/dev/mmcblk0p1 rootwait"
|
|
||||||
+
|
|
||||||
+#define CONFIG_BAUDRATE 115200
|
|
||||||
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
|
|
||||||
+
|
|
||||||
+#define CONFIG_SYS_PROMPT "U-Boot> "
|
|
||||||
+#define CONFIG_SYS_CBSIZE 256
|
|
||||||
+#define CONFIG_SYS_MAXARGS 16
|
|
||||||
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
||||||
+#define CONFIG_SYS_LONGHELP 1
|
|
||||||
+#define CONFIG_CMDLINE_EDITING 1
|
|
||||||
+
|
|
||||||
+/*
|
|
||||||
+ * Size of malloc() pool
|
|
||||||
+ */
|
|
||||||
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
|
|
||||||
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
|
|
||||||
+
|
|
||||||
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
|
|
||||||
+
|
|
||||||
+#ifdef CONFIG_USE_IRQ
|
|
||||||
+#error CONFIG_USE_IRQ not supported
|
|
||||||
+#endif
|
|
||||||
+
|
|
||||||
+#endif
|
|
||||||
--
|
|
||||||
1.7.0.4
|
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -1,24 +0,0 @@
|
||||||
The function get_mci_clk_rate is used inside atmel_mci driver
|
|
||||||
but never defined. Fix this typo.
|
|
||||||
|
|
||||||
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>
|
|
||||||
---
|
|
||||||
drivers/mmc/atmel_mci.c | 2 +-
|
|
||||||
1 files changed, 1 insertions(+), 1 deletions(-)
|
|
||||||
|
|
||||||
diff --git a/drivers/mmc/atmel_mci.c b/drivers/mmc/atmel_mci.c
|
|
||||||
index 3946ffe..628aac9 100644
|
|
||||||
--- a/drivers/mmc/atmel_mci.c
|
|
||||||
+++ b/drivers/mmc/atmel_mci.c
|
|
||||||
@@ -67,7 +67,7 @@ static void mci_set_mode(unsigned long hz, unsigned long blklen)
|
|
||||||
unsigned long bus_hz;
|
|
||||||
unsigned long clkdiv;
|
|
||||||
|
|
||||||
- bus_hz = get_mci_clk_rate();
|
|
||||||
+ bus_hz = get_mck_clk_rate();
|
|
||||||
clkdiv = (bus_hz / hz) / 2 - 1;
|
|
||||||
|
|
||||||
pr_debug("mmc: setting clock %lu Hz, block size %lu\n",
|
|
||||||
--
|
|
||||||
1.7.0.4
|
|
||||||
|
|
||||||
|
|
@ -1,15 +0,0 @@
|
||||||
#
|
|
||||||
|
|
||||||
all: ubpar
|
|
||||||
|
|
||||||
crc32.c:
|
|
||||||
ln -s ../lib_generic/crc32.c ./
|
|
||||||
|
|
||||||
%.o: %.c
|
|
||||||
$(CC) -I ../include $(CFLAGS) $(EXTRA_FLAGS) -DLAN_IP=$(LAN_IP) -DLAN_SERVERIP=$(LAN_SERVERIP) -c -o $@ $^
|
|
||||||
|
|
||||||
ubpar: ubpar.o crc32.o
|
|
||||||
$(CC) -o $@ $^
|
|
||||||
|
|
||||||
clean:
|
|
||||||
rm -f *.o ubpar
|
|
||||||
|
|
@ -1,135 +0,0 @@
|
||||||
/*
|
|
||||||
* ubparams.c
|
|
||||||
*
|
|
||||||
* Generate a u-boot parameter block with correct crc
|
|
||||||
*
|
|
||||||
* (C) 1007 Guthrie Consulting
|
|
||||||
* hamish@prodigi.ch
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <stdio.h>
|
|
||||||
#include <stdlib.h>
|
|
||||||
#include <string.h>
|
|
||||||
|
|
||||||
#ifndef __ASSEMBLY__
|
|
||||||
#define __ASSEMBLY__
|
|
||||||
#endif
|
|
||||||
#define __ASM_STUB_PROCESSOR_H__
|
|
||||||
#include <config.h>
|
|
||||||
#undef __ASSEMBLY__
|
|
||||||
#include <environment.h>
|
|
||||||
|
|
||||||
#define XMK_STR(x) #x
|
|
||||||
#define MK_STR(x) XMK_STR(x)
|
|
||||||
|
|
||||||
extern unsigned long crc32 (unsigned long, const unsigned char *, unsigned int);
|
|
||||||
|
|
||||||
#if !defined(ENV_CRC)
|
|
||||||
#define ENV_CRC ~0
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifdef LAN_IP
|
|
||||||
#warning LAN_IP
|
|
||||||
#else
|
|
||||||
#warning LAN_IP NOT DEFINED
|
|
||||||
#endif
|
|
||||||
#ifdef LAN_SERVERIP
|
|
||||||
#warning LAN_SERVERIP
|
|
||||||
#else
|
|
||||||
#warning LAN_SERVERIP NOT DEFINED
|
|
||||||
#endif
|
|
||||||
|
|
||||||
static char *environment[] = {
|
|
||||||
"bootdelay=3\0"
|
|
||||||
"baudrate=115200\0"
|
|
||||||
"stdin=serial\0"
|
|
||||||
"stdout=serial\0"
|
|
||||||
"stderr=serial\0"
|
|
||||||
"fbargs=setenv bootargs root=/dev/mtdblock3 ro console=/dev/ttyS0,115200,mem=32M\0"
|
|
||||||
"rdba=setenv bootargs root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 console=/dev/ttyS0,115200,mem=32M\0"
|
|
||||||
"rdram=run rdba; tftp 21000000 uImage; tftp 21200000 root.squashfs; bootm 21000000\0"
|
|
||||||
"flash=run fbargs; bootm 0xc0042000\0"
|
|
||||||
"bootargs=setenv bootargs root=/dev/mtdblock3 ro console=/dev/ttyS0,115200,mem=32M\0"
|
|
||||||
"bootcmd=bootm 0xc0042000\0"
|
|
||||||
"ipaddr=" MK_STR(LAN_IP) "\0"
|
|
||||||
"serverip=" MK_STR(LAN_SERVERIP) "\0"
|
|
||||||
"\0"
|
|
||||||
};
|
|
||||||
|
|
||||||
int main(int argc, char *argv[]) {
|
|
||||||
env_t *envptr;
|
|
||||||
char *src, *srcptr;
|
|
||||||
char *dataptr;
|
|
||||||
FILE *params;
|
|
||||||
int argfail = 1;
|
|
||||||
char newmac[30];
|
|
||||||
char newser[30];
|
|
||||||
int paramlen = 0;
|
|
||||||
int progmac = 0;
|
|
||||||
int progser = 0;
|
|
||||||
|
|
||||||
if (argc < 3) {
|
|
||||||
printf ("Invalid arguments\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
switch (argc) {
|
|
||||||
case 5:
|
|
||||||
if (strcmp(argv[3], "--serial") == 0) {
|
|
||||||
argfail = 0;
|
|
||||||
sprintf(newser, "serial#=%s", argv[4]);
|
|
||||||
progser = 1;
|
|
||||||
}
|
|
||||||
case 3:
|
|
||||||
if (strcmp(argv[1], "--mac") == 0) {
|
|
||||||
argfail = 0;
|
|
||||||
sprintf(newmac, "ethaddr=%s", argv[2]);
|
|
||||||
progmac = 1;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
argfail = 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (argfail) {
|
|
||||||
printf("Invalid arguments\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
src = srcptr = *environment;
|
|
||||||
envptr = (env_t *)malloc(CFG_ENV_SIZE);
|
|
||||||
dataptr = (char *)envptr + ENV_HEADER_SIZE;
|
|
||||||
|
|
||||||
while(*srcptr) {
|
|
||||||
//printf("%d, %s\n", strlen(srcptr), srcptr);
|
|
||||||
paramlen += strlen(srcptr) + 1;
|
|
||||||
srcptr += strlen(srcptr) + 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
printf("Make u-boot params\n");
|
|
||||||
printf("Params size is %d\n", CFG_ENV_SIZE);
|
|
||||||
|
|
||||||
memset(envptr, 0, CFG_ENV_SIZE);
|
|
||||||
memcpy(dataptr, src, paramlen);
|
|
||||||
dataptr += paramlen;
|
|
||||||
|
|
||||||
if (progmac) {
|
|
||||||
memcpy(dataptr, newmac, strlen(newmac));
|
|
||||||
dataptr += strlen(newmac) + 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (progser) {
|
|
||||||
memcpy(dataptr, newser, strlen(newser));
|
|
||||||
dataptr += strlen(newser) + 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
envptr->crc = crc32(0, envptr->data, ENV_SIZE);
|
|
||||||
|
|
||||||
params = fopen("/dev/mtd1", "w");
|
|
||||||
fwrite(envptr, CFG_ENV_SIZE, 1, params);
|
|
||||||
fclose(params);
|
|
||||||
|
|
||||||
free(envptr);
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
Loading…
Reference in a new issue