hostapd: update wpa_supplicant full config
Update the config file to the latest version. Enabled flags are the same as before. Commented CONFIG_IEEE80211W=y flag because it is set in the Makefile, only if the driver supports it. Removed NEED_80211_COMMON flag because it is not part of config file, it is set by the hostapd upstream Makefile. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
This commit is contained in:
Lorenzo Santina
Stijn Tintel
parent
70ade53692
commit
65113799d7
1 changed files with 280 additions and 93 deletions
|
|
@ -1,9 +1,9 @@
|
|||
# Example wpa_supplicant build time configuration
|
||||
#
|
||||
# This file lists the configuration options that are used when building the
|
||||
# hostapd binary. All lines starting with # are ignored. Configuration option
|
||||
# lines must be commented out complete, if they are not to be included, i.e.,
|
||||
# just setting VARIABLE=n is not disabling that variable.
|
||||
# wpa_supplicant binary. All lines starting with # are ignored. Configuration
|
||||
# option lines must be commented out complete, if they are not to be included,
|
||||
# i.e., just setting VARIABLE=n is not disabling that variable.
|
||||
#
|
||||
# This file is included in Makefile, so variables like CFLAGS and LIBS can also
|
||||
# be modified from here. In most cases, these lines should use += in order not
|
||||
|
|
@ -20,63 +20,33 @@
|
|||
# used to fix build issues on such systems (krb5.h not found).
|
||||
#CFLAGS += -I/usr/include/kerberos
|
||||
|
||||
# Example configuration for various cross-compilation platforms
|
||||
|
||||
#### sveasoft (e.g., for Linksys WRT54G) ######################################
|
||||
#CC=mipsel-uclibc-gcc
|
||||
#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
|
||||
#CFLAGS += -Os
|
||||
#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
|
||||
#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
|
||||
###############################################################################
|
||||
|
||||
#### openwrt (e.g., for Linksys WRT54G) #######################################
|
||||
#CC=mipsel-uclibc-gcc
|
||||
#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
|
||||
#CFLAGS += -Os
|
||||
#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
|
||||
# -I../WRT54GS/release/src/include
|
||||
#LIBS = -lssl
|
||||
###############################################################################
|
||||
|
||||
|
||||
# Driver interface for Host AP driver
|
||||
#CONFIG_DRIVER_HOSTAP=y
|
||||
|
||||
# Driver interface for Agere driver
|
||||
#CONFIG_DRIVER_HERMES=y
|
||||
# Change include directories to match with the local setup
|
||||
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
|
||||
#CFLAGS += -I../../include/wireless
|
||||
|
||||
# Driver interface for ndiswrapper
|
||||
# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
|
||||
#CONFIG_DRIVER_NDISWRAPPER=y
|
||||
|
||||
# Driver interface for Atmel driver
|
||||
# CONFIG_DRIVER_ATMEL=y
|
||||
|
||||
# Driver interface for old Broadcom driver
|
||||
# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
|
||||
# Linux wireless extensions and does not need (or even work) with the old
|
||||
# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
|
||||
#CONFIG_DRIVER_BROADCOM=y
|
||||
# Example path for wlioctl.h; change to match your configuration
|
||||
#CFLAGS += -I/opt/WRT54GS/release/src/include
|
||||
|
||||
# Driver interface for Intel ipw2100/2200 driver
|
||||
# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
|
||||
#CONFIG_DRIVER_IPW=y
|
||||
|
||||
# Driver interface for Ralink driver
|
||||
#CONFIG_DRIVER_RALINK=y
|
||||
|
||||
# Driver interface for generic Linux wireless extensions
|
||||
# Note: WEXT is deprecated in the current Linux kernel version and no new
|
||||
# functionality is added to it. nl80211-based interface is the new
|
||||
# replacement for WEXT and its use allows wpa_supplicant to properly control
|
||||
# the driver to improve existing functionality like roaming and to support new
|
||||
# functionality.
|
||||
CONFIG_DRIVER_WEXT=y
|
||||
|
||||
# Driver interface for Linux drivers using the nl80211 kernel interface
|
||||
CONFIG_DRIVER_NL80211=y
|
||||
|
||||
# QCA vendor extensions to nl80211
|
||||
#CONFIG_DRIVER_NL80211_QCA=y
|
||||
|
||||
# driver_nl80211.c requires libnl. If you are compiling it yourself
|
||||
# you may need to point hostapd to your version of libnl.
|
||||
#
|
||||
#CFLAGS += -I$<path to libnl include files>
|
||||
#LIBS += -L$<path to libnl library files>
|
||||
|
||||
# Use libnl v2.0 (or 3.0) libraries.
|
||||
#CONFIG_LIBNL20=y
|
||||
|
||||
# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
|
||||
#CONFIG_LIBNL32=y
|
||||
|
||||
|
||||
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
|
||||
#CONFIG_DRIVER_BSD=y
|
||||
#CFLAGS += -I/usr/local/include
|
||||
|
|
@ -100,14 +70,6 @@ CONFIG_DRIVER_NL80211=y
|
|||
# wpa_supplicant.
|
||||
# CONFIG_USE_NDISUIO=y
|
||||
|
||||
# Driver interface for development testing
|
||||
#CONFIG_DRIVER_TEST=y
|
||||
|
||||
# Include client MLME (management frame processing) for test driver
|
||||
# This can be used to test MLME operations in hostapd with the test interface.
|
||||
# space.
|
||||
#CONFIG_CLIENT_MLME=y
|
||||
|
||||
# Driver interface for wired Ethernet drivers
|
||||
CONFIG_DRIVER_WIRED=y
|
||||
|
||||
|
|
@ -117,13 +79,14 @@ CONFIG_DRIVER_WIRED=y
|
|||
# Driver interface for no driver (e.g., WPS ER only)
|
||||
#CONFIG_DRIVER_NONE=y
|
||||
|
||||
# Solaris libraries
|
||||
#LIBS += -lsocket -ldlpi -lnsl
|
||||
#LIBS_c += -lsocket
|
||||
|
||||
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
|
||||
# included)
|
||||
CONFIG_IEEE8021X_EAPOL=y
|
||||
|
||||
# EAP-FAST
|
||||
CONFIG_EAP_FAST=y
|
||||
|
||||
# EAP-MD5
|
||||
CONFIG_EAP_MD5=y
|
||||
|
||||
|
|
@ -140,11 +103,10 @@ CONFIG_EAP_PEAP=y
|
|||
CONFIG_EAP_TTLS=y
|
||||
|
||||
# EAP-FAST
|
||||
# Note: Default OpenSSL package does not include support for all the
|
||||
# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
|
||||
# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
|
||||
# to add the needed functions.
|
||||
#CONFIG_EAP_FAST=y
|
||||
# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
|
||||
# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
|
||||
# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
|
||||
CONFIG_EAP_FAST=y
|
||||
|
||||
# EAP-GTC
|
||||
CONFIG_EAP_GTC=y
|
||||
|
|
@ -158,6 +120,9 @@ CONFIG_EAP_OTP=y
|
|||
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
|
||||
#CONFIG_EAP_PSK=y
|
||||
|
||||
# EAP-pwd (secure authentication using only a password)
|
||||
#CONFIG_EAP_PWD=y
|
||||
|
||||
# EAP-PAX
|
||||
#CONFIG_EAP_PAX=y
|
||||
|
||||
|
|
@ -187,10 +152,20 @@ CONFIG_EAP_LEAP=y
|
|||
|
||||
# Wi-Fi Protected Setup (WPS)
|
||||
CONFIG_WPS=y
|
||||
# Enable WPS external registrar functionality
|
||||
#CONFIG_WPS_ER=y
|
||||
# Disable credentials for an open network by default when acting as a WPS
|
||||
# registrar.
|
||||
#CONFIG_WPS_REG_DISABLE_OPEN=y
|
||||
# Enable WPS support with NFC config method
|
||||
#CONFIG_WPS_NFC=y
|
||||
|
||||
# EAP-IKEv2
|
||||
#CONFIG_EAP_IKEV2=y
|
||||
|
||||
# EAP-EKE
|
||||
#CONFIG_EAP_EKE=y
|
||||
|
||||
# PKCS#12 (PFX) support (used to read private key and certificate file from
|
||||
# a file that usually has extension .p12 or .pfx)
|
||||
CONFIG_PKCS12=y
|
||||
|
|
@ -203,13 +178,22 @@ CONFIG_SMARTCARD=y
|
|||
# Enable this if EAP-SIM or EAP-AKA is included
|
||||
#CONFIG_PCSC=y
|
||||
|
||||
# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
|
||||
#CONFIG_HT_OVERRIDES=y
|
||||
|
||||
# Support VHT overrides (disable VHT, mask MCS rates, etc.)
|
||||
#CONFIG_VHT_OVERRIDES=y
|
||||
|
||||
# Development testing
|
||||
#CONFIG_EAPOL_TEST=y
|
||||
|
||||
# Select control interface backend for external programs, e.g, wpa_cli:
|
||||
# unix = UNIX domain sockets (default for Linux/*BSD)
|
||||
# udp = UDP sockets using localhost (127.0.0.1)
|
||||
# udp6 = UDP IPv6 sockets using localhost (::1)
|
||||
# named_pipe = Windows Named Pipe (default for Windows)
|
||||
# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
|
||||
# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
|
||||
# y = use default (backwards compatibility)
|
||||
# If this option is commented out, control interface is not included in the
|
||||
# build.
|
||||
|
|
@ -221,6 +205,10 @@ CONFIG_CTRL_IFACE=y
|
|||
# the resulting binary.
|
||||
#CONFIG_READLINE=y
|
||||
|
||||
# Include internal line edit mode in wpa_cli. This can be used as a replacement
|
||||
# for GNU Readline to provide limited command line editing and history support.
|
||||
#CONFIG_WPA_CLI_EDIT=y
|
||||
|
||||
# Remove debugging code that is printing out debug message to stdout.
|
||||
# This can be used to reduce the size of the wpa_supplicant considerably
|
||||
# if debugging code is not needed. The size reduction can be around 35%
|
||||
|
|
@ -231,11 +219,6 @@ CONFIG_CTRL_IFACE=y
|
|||
# 35-50 kB in code size.
|
||||
#CONFIG_NO_WPA=y
|
||||
|
||||
# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
|
||||
# save about 1 kB in code size when building only WPA-Personal (no EAP support)
|
||||
# or 6 kB if building for WPA-Enterprise.
|
||||
#CONFIG_NO_WPA2=y
|
||||
|
||||
# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
|
||||
# This option can be used to reduce code size by removing support for
|
||||
# converting ASCII passphrases into PSK. If this functionality is removed, the
|
||||
|
|
@ -270,7 +253,7 @@ CONFIG_BACKEND=file
|
|||
# main_none = Very basic example (development use only)
|
||||
#CONFIG_MAIN=main
|
||||
|
||||
# Select wrapper for operatins system and C library specific functions
|
||||
# Select wrapper for operating system and C library specific functions
|
||||
# unix = UNIX/POSIX like systems (default)
|
||||
# win32 = Windows systems
|
||||
# none = Empty template
|
||||
|
|
@ -279,9 +262,17 @@ CONFIG_BACKEND=file
|
|||
# Select event loop implementation
|
||||
# eloop = select() loop (default)
|
||||
# eloop_win = Windows events and WaitForMultipleObject() loop
|
||||
# eloop_none = Empty template
|
||||
#CONFIG_ELOOP=eloop
|
||||
|
||||
# Should we use poll instead of select? Select is used by default.
|
||||
#CONFIG_ELOOP_POLL=y
|
||||
|
||||
# Should we use epoll instead of select? Select is used by default.
|
||||
#CONFIG_ELOOP_EPOLL=y
|
||||
|
||||
# Should we use kqueue instead of select? Select is used by default.
|
||||
#CONFIG_ELOOP_KQUEUE=y
|
||||
|
||||
# Select layer 2 packet implementation
|
||||
# linux = Linux packet socket (default)
|
||||
# pcap = libpcap/libdnet/WinPcap
|
||||
|
|
@ -291,29 +282,44 @@ CONFIG_BACKEND=file
|
|||
# none = Empty template
|
||||
#CONFIG_L2_PACKET=linux
|
||||
|
||||
# Disable Linux packet socket workaround applicable for station interface
|
||||
# in a bridge for EAPOL frames. This should be uncommented only if the kernel
|
||||
# is known to not have the regression issue in packet socket behavior with
|
||||
# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
|
||||
#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
|
||||
|
||||
# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
|
||||
CONFIG_PEERKEY=y
|
||||
|
||||
# IEEE 802.11w (management frame protection)
|
||||
# This version is an experimental implementation based on IEEE 802.11w/D1.0
|
||||
# draft and is subject to change since the standard has not yet been finalized.
|
||||
# IEEE 802.11w (management frame protection), also known as PMF
|
||||
# Driver support is also needed for IEEE 802.11w.
|
||||
CONFIG_IEEE80211W=y
|
||||
#CONFIG_IEEE80211W=y
|
||||
|
||||
# Select TLS implementation
|
||||
# openssl = OpenSSL (default)
|
||||
# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
|
||||
# gnutls = GnuTLS
|
||||
# internal = Internal TLSv1 implementation (experimental)
|
||||
# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
|
||||
# none = Empty template
|
||||
CONFIG_TLS=internal
|
||||
|
||||
# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
|
||||
# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
|
||||
# even though the core GnuTLS library is released under LGPL, this extra
|
||||
# library uses GPL and as such, the terms of GPL apply to the combination
|
||||
# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
|
||||
# apply for distribution of the resulting binary.
|
||||
#CONFIG_GNUTLS_EXTRA=y
|
||||
# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
|
||||
# can be enabled to get a stronger construction of messages when block ciphers
|
||||
# are used. It should be noted that some existing TLS v1.0 -based
|
||||
# implementation may not be compatible with TLS v1.1 message (ClientHello is
|
||||
# sent prior to negotiating which version will be used)
|
||||
#CONFIG_TLSV11=y
|
||||
|
||||
# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
|
||||
# can be enabled to enable use of stronger crypto algorithms. It should be
|
||||
# noted that some existing TLS v1.0 -based implementation may not be compatible
|
||||
# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
|
||||
# will be used)
|
||||
#CONFIG_TLSV12=y
|
||||
|
||||
# Select which ciphers to use by default with OpenSSL if the user does not
|
||||
# specify them.
|
||||
#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
|
||||
|
||||
# If CONFIG_TLS=internal is used, additional library and include paths are
|
||||
# needed for LibTomMath. Alternatively, an integrated, minimal version of
|
||||
|
|
@ -369,12 +375,31 @@ CONFIG_INTERNAL_LIBTOMMATH_FAST=y
|
|||
# amount of memory/flash.
|
||||
#CONFIG_DYNAMIC_EAP_METHODS=y
|
||||
|
||||
# IEEE Std 802.11r-2008 (Fast BSS Transition)
|
||||
# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
|
||||
CONFIG_IEEE80211R=y
|
||||
|
||||
# IEEE Std 802.11r-2008 (Fast BSS Transition) for AP mode (implies
|
||||
# CONFIG_IEEE80211R).
|
||||
#CONFIG_IEEE80211R_AP=y
|
||||
|
||||
# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
|
||||
#CONFIG_DEBUG_FILE=y
|
||||
|
||||
# Send debug messages to syslog instead of stdout
|
||||
#CONFIG_DEBUG_SYSLOG=y
|
||||
# Set syslog facility for debug messages
|
||||
#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
|
||||
|
||||
# Add support for sending all debug messages (regardless of debug verbosity)
|
||||
# to the Linux kernel tracing facility. This helps debug the entire stack by
|
||||
# making it easy to record everything happening from the driver up into the
|
||||
# same file, e.g., using trace-cmd.
|
||||
#CONFIG_DEBUG_LINUX_TRACING=y
|
||||
|
||||
# Add support for writing debug log to Android logcat instead of standard
|
||||
# output
|
||||
#CONFIG_ANDROID_LOG=y
|
||||
|
||||
# Enable privilege separation (see README 'Privilege separation' for details)
|
||||
#CONFIG_PRIVSEP=y
|
||||
|
||||
|
|
@ -386,7 +411,7 @@ CONFIG_IEEE80211R=y
|
|||
# This tracks use of memory allocations and other registrations and reports
|
||||
# incorrect use with a backtrace of call (or allocation) location.
|
||||
#CONFIG_WPA_TRACE=y
|
||||
# For BSD, comment out these.
|
||||
# For BSD, uncomment these.
|
||||
#LIBS += -lexecinfo
|
||||
#LIBS_p += -lexecinfo
|
||||
#LIBS_c += -lexecinfo
|
||||
|
|
@ -395,12 +420,174 @@ CONFIG_IEEE80211R=y
|
|||
# This enables use of libbfd to get more detailed symbols for the backtraces
|
||||
# generated by CONFIG_WPA_TRACE=y.
|
||||
#CONFIG_WPA_TRACE_BFD=y
|
||||
# For BSD, comment out these.
|
||||
# For BSD, uncomment these.
|
||||
#LIBS += -lbfd -liberty -lz
|
||||
#LIBS_p += -lbfd -liberty -lz
|
||||
#LIBS_c += -lbfd -liberty -lz
|
||||
|
||||
# wpa_supplicant depends on strong random number generation being available
|
||||
# from the operating system. os_get_random() function is used to fetch random
|
||||
# data when needed, e.g., for key generation. On Linux and BSD systems, this
|
||||
# works by reading /dev/urandom. It should be noted that the OS entropy pool
|
||||
# needs to be properly initialized before wpa_supplicant is started. This is
|
||||
# important especially on embedded devices that do not have a hardware random
|
||||
# number generator and may by default start up with minimal entropy available
|
||||
# for random number generation.
|
||||
#
|
||||
# As a safety net, wpa_supplicant is by default trying to internally collect
|
||||
# additional entropy for generating random data to mix in with the data fetched
|
||||
# from the OS. This by itself is not considered to be very strong, but it may
|
||||
# help in cases where the system pool is not initialized properly. However, it
|
||||
# is very strongly recommended that the system pool is initialized with enough
|
||||
# entropy either by using hardware assisted random number generator or by
|
||||
# storing state over device reboots.
|
||||
#
|
||||
# wpa_supplicant can be configured to maintain its own entropy store over
|
||||
# restarts to enhance random number generation. This is not perfect, but it is
|
||||
# much more secure than using the same sequence of random numbers after every
|
||||
# reboot. This can be enabled with -e<entropy file> command line option. The
|
||||
# specified file needs to be readable and writable by wpa_supplicant.
|
||||
#
|
||||
# If the os_get_random() is known to provide strong random data (e.g., on
|
||||
# Linux/BSD, the board in question is known to have reliable source of random
|
||||
# data from /dev/urandom), the internal wpa_supplicant random pool can be
|
||||
# disabled. This will save some in binary size and CPU use. However, this
|
||||
# should only be considered for builds that are known to be used on devices
|
||||
# that meet the requirements described above.
|
||||
CONFIG_NO_RANDOM_POOL=y
|
||||
NEED_80211_COMMON=y
|
||||
|
||||
# IEEE 802.11n (High Throughput) support (mainly for AP mode)
|
||||
#CONFIG_IEEE80211N=y
|
||||
|
||||
# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
|
||||
# (depends on CONFIG_IEEE80211N)
|
||||
#CONFIG_IEEE80211AC=y
|
||||
|
||||
# Wireless Network Management (IEEE Std 802.11v-2011)
|
||||
# Note: This is experimental and not complete implementation.
|
||||
#CONFIG_WNM=y
|
||||
|
||||
# Interworking (IEEE 802.11u)
|
||||
# This can be used to enable functionality to improve interworking with
|
||||
# external networks (GAS/ANQP to learn more about the networks and network
|
||||
# selection based on available credentials).
|
||||
#CONFIG_INTERWORKING=y
|
||||
|
||||
# Hotspot 2.0
|
||||
#CONFIG_HS20=y
|
||||
|
||||
# Enable interface matching in wpa_supplicant
|
||||
#CONFIG_MATCH_IFACE=y
|
||||
|
||||
# Disable roaming in wpa_supplicant
|
||||
#CONFIG_NO_ROAMING=y
|
||||
|
||||
# AP mode operations with wpa_supplicant
|
||||
# This can be used for controlling AP mode operations with wpa_supplicant. It
|
||||
# should be noted that this is mainly aimed at simple cases like
|
||||
# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
|
||||
# external RADIUS server can be supported with hostapd.
|
||||
#CONFIG_AP=y
|
||||
|
||||
# P2P (Wi-Fi Direct)
|
||||
# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
|
||||
# more information on P2P operations.
|
||||
#CONFIG_P2P=y
|
||||
|
||||
# Enable TDLS support
|
||||
#CONFIG_TDLS=y
|
||||
|
||||
# Wi-Fi Direct
|
||||
# This can be used to enable Wi-Fi Direct extensions for P2P using an external
|
||||
# program to control the additional information exchanges in the messages.
|
||||
#CONFIG_WIFI_DISPLAY=y
|
||||
|
||||
# Autoscan
|
||||
# This can be used to enable automatic scan support in wpa_supplicant.
|
||||
# See wpa_supplicant.conf for more information on autoscan usage.
|
||||
#
|
||||
# Enabling directly a module will enable autoscan support.
|
||||
# For exponential module:
|
||||
#CONFIG_AUTOSCAN_EXPONENTIAL=y
|
||||
# For periodic module:
|
||||
#CONFIG_AUTOSCAN_PERIODIC=y
|
||||
|
||||
# Password (and passphrase, etc.) backend for external storage
|
||||
# These optional mechanisms can be used to add support for storing passwords
|
||||
# and other secrets in external (to wpa_supplicant) location. This allows, for
|
||||
# example, operating system specific key storage to be used
|
||||
#
|
||||
# External password backend for testing purposes (developer use)
|
||||
#CONFIG_EXT_PASSWORD_TEST=y
|
||||
|
||||
# Enable Fast Session Transfer (FST)
|
||||
#CONFIG_FST=y
|
||||
|
||||
# Enable CLI commands for FST testing
|
||||
#CONFIG_FST_TEST=y
|
||||
|
||||
# OS X builds. This is only for building eapol_test.
|
||||
#CONFIG_OSX=y
|
||||
|
||||
# Automatic Channel Selection
|
||||
# This will allow wpa_supplicant to pick the channel automatically when channel
|
||||
# is set to "0".
|
||||
#
|
||||
# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
|
||||
# to "channel=0". This would enable us to eventually add other ACS algorithms in
|
||||
# similar way.
|
||||
#
|
||||
# Automatic selection is currently only done through initialization, later on
|
||||
# we hope to do background checks to keep us moving to more ideal channels as
|
||||
# time goes by. ACS is currently only supported through the nl80211 driver and
|
||||
# your driver must have survey dump capability that is filled by the driver
|
||||
# during scanning.
|
||||
#
|
||||
# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
|
||||
# a newly to create wpa_supplicant.conf variable acs_num_scans.
|
||||
#
|
||||
# Supported ACS drivers:
|
||||
# * ath9k
|
||||
# * ath5k
|
||||
# * ath10k
|
||||
#
|
||||
# For more details refer to:
|
||||
# http://wireless.kernel.org/en/users/Documentation/acs
|
||||
#CONFIG_ACS=y
|
||||
|
||||
# Support Multi Band Operation
|
||||
#CONFIG_MBO=y
|
||||
|
||||
# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
|
||||
# Note: This is an experimental and not yet complete implementation. This
|
||||
# should not be enabled for production use.
|
||||
#CONFIG_FILS=y
|
||||
# FILS shared key authentication with PFS
|
||||
#CONFIG_FILS_SK_PFS=y
|
||||
|
||||
# Support RSN on IBSS networks
|
||||
# This is needed to be able to use mode=1 network profile with proto=RSN and
|
||||
# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
|
||||
CONFIG_IBSS_RSN=y
|
||||
|
||||
# External PMKSA cache control
|
||||
# This can be used to enable control interface commands that allow the current
|
||||
# PMKSA cache entries to be fetched and new entries to be added.
|
||||
#CONFIG_PMKSA_CACHE_EXTERNAL=y
|
||||
|
||||
# Mesh Networking (IEEE 802.11s)
|
||||
#CONFIG_MESH=y
|
||||
|
||||
# Background scanning modules
|
||||
# These can be used to request wpa_supplicant to perform background scanning
|
||||
# operations for roaming within an ESS (same SSID). See the bgscan parameter in
|
||||
# the wpa_supplicant.conf file for more details.
|
||||
# Periodic background scans based on signal strength
|
||||
#CONFIG_BGSCAN_SIMPLE=y
|
||||
# Learn channels used by the network and try to avoid bgscans on other
|
||||
# channels (experimental)
|
||||
#CONFIG_BGSCAN_LEARN=y
|
||||
|
||||
# Opportunistic Wireless Encryption (OWE)
|
||||
# Experimental implementation of draft-harkins-owe-07.txt
|
||||
#CONFIG_OWE=y
|
||||
|
|
|
|||
Loading…
Reference in a new issue