nuke old 2.6.23 code for brcm47xx

SVN-Revision: 13910
2009-01-06 22:38:38 +00:00 · 2009-01-06 22:38:38 +00:00 · 64c35d0942
commit 64c35d0942
parent c2b878a384
44 changed files with 0 additions and 7898 deletions
--- a/target/linux/brcm47xx/config-2.6.23
+++ b/target/linux/brcm47xx/config-2.6.23
@ -1,246 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_8139TOO is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ARPD is not set
-# CONFIG_ATMEL is not set
-CONFIG_B44=y
-CONFIG_BASE_SMALL=0
-# CONFIG_BCM43XX is not set
-CONFIG_BCM947XX=y
-CONFIG_BITREVERSE=y
-# CONFIG_BONDING is not set
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_CFE=y
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CLS_U32_MARK is not set
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_E100 is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HID=m
-# CONFIG_HID_SUPPORT is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_I2C is not set
-# CONFIG_IDE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=m
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-CONFIG_IPW2200_QOS=y
-# CONFIG_IP_ROUTE_VERBOSE is not set
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_ALIX is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_LLC2 is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_BCM47XX=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_ONENAND is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-CONFIG_PCI=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PROC_KCORE is not set
-# CONFIG_RTC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_RSA is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SSB=y
-CONFIG_SSB_DEBUG=y
-CONFIG_SSB_DRIVER_EXTIF=y
-# CONFIG_SSB_DRIVER_GIGE is not set
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_PCICORE_HOSTMODE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_POSSIBLE=y
-CONFIG_SSB_SERIAL=y
-# CONFIG_SSB_SILENT is not set
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB=m
-# CONFIG_USB_CATC is not set
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_SSB=y
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USER_NS is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_ZONE_DMA_FLAG=0
--- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/Makefile
+++ b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/Makefile
@ -1,7 +0,0 @@
-#
-# Makefile for the BCM47xx specific kernel interface routines
-# under Linux.
-#
-
-obj-y := irq.o prom.o setup.o time.o
-obj-y += nvram.o cfe_env.o
--- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/cfe_env.c
+++ b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/cfe_env.c
@ -1,229 +0,0 @@
-/*
- * CFE environment variable access
- *
- * Copyright 2001-2003, Broadcom Corporation
- * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
- * 
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#define NVRAM_SIZE       (0x1ff0)
-static char _nvdata[NVRAM_SIZE];
-static char _valuestr[256];
-
-/*
- * TLV types.  These codes are used in the "type-length-value"
- * encoding of the items stored in the NVRAM device (flash or EEPROM)
- *
- * The layout of the flash/nvram is as follows:
- *
- * <type> <length> <data ...> <type> <length> <data ...> <type_end>
- *
- * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
- * The "length" field marks the length of the data section, not
- * including the type and length fields.
- *
- * Environment variables are stored as follows:
- *
- * <type_env> <length> <flags> <name> = <value>
- *
- * If bit 0 (low bit) is set, the length is an 8-bit value.
- * If bit 0 (low bit) is clear, the length is a 16-bit value
- * 
- * Bit 7 set indicates "user" TLVs.  In this case, bit 0 still
- * indicates the size of the length field.  
- *
- * Flags are from the constants below:
- *
- */
-#define ENV_LENGTH_16BITS	0x00	/* for low bit */
-#define ENV_LENGTH_8BITS	0x01
-
-#define ENV_TYPE_USER		0x80
-
-#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-
-/*
- * The actual TLV types we support
- */
-
-#define ENV_TLV_TYPE_END	0x00	
-#define ENV_TLV_TYPE_ENV	ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-
-/*
- * Environment variable flags 
- */
-
-#define ENV_FLG_NORMAL		0x00	/* normal read/write */
-#define ENV_FLG_BUILTIN		0x01	/* builtin - not stored in flash */
-#define ENV_FLG_READONLY	0x02	/* read-only - cannot be changed */
-
-#define ENV_FLG_MASK		0xFF	/* mask of attributes we keep */
-#define ENV_FLG_ADMIN		0x100	/* lets us internally override permissions */
-
-
-/*  *********************************************************************
-    *  _nvram_read(buffer,offset,length)
-    *  
-    *  Read data from the NVRAM device
-    *  
-    *  Input parameters: 
-    *  	   buffer - destination buffer
-    *  	   offset - offset of data to read
-    *  	   length - number of bytes to read
-    *  	   
-    *  Return value:
-    *  	   number of bytes read, or <0 if error occured
-    ********************************************************************* */
-static int
-_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-{
-    int i;
-    if (offset > NVRAM_SIZE)
-	return -1; 
-
-    for ( i = 0; i < length; i++) {
-	buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-    }
-    return length;
-}
-
-
-static char*
-_strnchr(const char *dest,int c,size_t cnt)
-{
-	while (*dest && (cnt > 0)) {
-	if (*dest == c) return (char *) dest;
-	dest++;
-	cnt--;
-	}
-	return NULL;
-}
-
-
-
-/*
- * Core support API: Externally visible.
- */
-
-/*
- * Get the value of an NVRAM variable
- * @param	name	name of variable to get
- * @return	value of variable or NULL if undefined
- */
-
-char* 
-cfe_env_get(unsigned char *nv_buf, char* name)
-{
-    int size;
-    unsigned char *buffer;
-    unsigned char *ptr;
-    unsigned char *envval;
-    unsigned int reclen;
-    unsigned int rectype;
-    int offset;
-    int flg;
-    
-	if (!strcmp(name, "nvram_type"))
-		return "cfe";
-	
-    size = NVRAM_SIZE;
-    buffer = &_nvdata[0];
-
-    ptr = buffer;
-    offset = 0;
-
-    /* Read the record type and length */
-    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-	goto error;
-    }
-    
-    while ((*ptr != ENV_TLV_TYPE_END)  && (size > 1)) {
-
-	/* Adjust pointer for TLV type */
-	rectype = *(ptr);
-	offset++;
-	size--;
-
-	/* 
-	 * Read the length.  It can be either 1 or 2 bytes
-	 * depending on the code 
-	 */
-	if (rectype & ENV_LENGTH_8BITS) {
-	    /* Read the record type and length - 8 bits */
-	    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-		goto error;
-	    }
-	    reclen = *(ptr);
-	    size--;
-	    offset++;
-	}
-	else {
-	    /* Read the record type and length - 16 bits, MSB first */
-	    if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-		goto error;
-	    }
-	    reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-	    size -= 2;
-	    offset += 2;
-	}
-
-	if (reclen > size)
-	    break;	/* should not happen, bad NVRAM */
-
-	switch (rectype) {
-	    case ENV_TLV_TYPE_ENV:
-		/* Read the TLV data */
-		if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-		    goto error;
-		flg = *ptr++;
-		envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-		if (envval) {
-		    *envval++ = '\0';
-		    memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-		    _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-#if 0			
-		    printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-#endif
-		    if(!strcmp(ptr, name)){
-			return _valuestr;
-		    }
-		    if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-			return _valuestr;
-		}
-		break;
-		
-	    default: 
-		/* Unknown TLV type, skip it. */
-		break;
-	    }
-
-	/*
-	 * Advance to next TLV 
-	 */
-		
-	size -= (int)reclen;
-	offset += reclen;
-
-	/* Read the next record type */
-	ptr = buffer;
-	if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-	    goto error;
-	}
-
-error:
-    return NULL;
-
-}
-
--- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/include/nvram.h
+++ b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/include/nvram.h
@ -1,37 +0,0 @@
-/*
- *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __NVRAM_H
-#define __NVRAM_H
-
-struct nvram_header {
-	u32 magic;
-	u32 len;
-	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
-	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
-	u32 config_ncdl;	/* ncdl values for memc */
-};
-
-struct nvram_tuple {
-	char *name;
-	char *value;
-	struct nvram_tuple *next;
-};
-
-#define NVRAM_HEADER		0x48534C46	/* 'FLSH' */
-#define NVRAM_VERSION		1
-#define NVRAM_HEADER_SIZE	20
-#define NVRAM_SPACE		0x8000
-
-#define NVRAM_MAX_VALUE_LEN 255
-#define NVRAM_MAX_PARAM_LEN 64
-
-char *nvram_get(const char *name);
-
-#endif
--- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/irq.c
+++ b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/irq.c
@ -1,86 +0,0 @@
-/*
- *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
- *  Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ssb/ssb.h>
-
-#include <asm/cpu.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/irq_cpu.h>
-
-
-extern struct ssb_bus ssb;
-
-
-void plat_irq_dispatch(void)
-{
-	u32 cause;
-
-	cause = read_c0_cause() & read_c0_status() & CAUSEF_IP;
-
-	clear_c0_status(cause);
-
-	if (cause & CAUSEF_IP7)
-		do_IRQ(7);
-	if (cause & CAUSEF_IP2)
-		do_IRQ(2);
-	if (cause & CAUSEF_IP3)
-		do_IRQ(3);
-	if (cause & CAUSEF_IP4)
-		do_IRQ(4);
-	if (cause & CAUSEF_IP5)
-		do_IRQ(5);
-	if (cause & CAUSEF_IP6)
-		do_IRQ(6);
-}
-
-void __init arch_init_irq(void)
-{
-	mips_cpu_irq_init();
-}
-
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int res;
-
-	res = ssb_pcibios_map_irq(dev, slot, pin);
-	if (res < 0) {
-		printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
-		       dev->dev.bus_id);
-		return 0;
-	}
-	/* IRQ-0 and IRQ-1 are software interrupts. */
-	WARN_ON((res == 0) || (res == 1));
-
-	return res;
-}
--- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/nvram.c
+++ b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/nvram.c
@ -1,125 +0,0 @@
-/*
- * BCM947xx nvram variable access
- *
- * Copyright 2005, Broadcom Corporation
- * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
- * 
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ssb/ssb.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <asm/byteorder.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <nvram.h>
-
-#define MB * 1048576
-extern struct ssb_bus ssb;
-
-static char nvram_buf[NVRAM_SPACE];
-static int cfe_env;
-extern char *cfe_env_get(char *nv_buf, const char *name);
-		
-/* Probe for NVRAM header */
-static void __init early_nvram_init(void)
-{
-	struct ssb_mipscore *mcore = &ssb.mipscore;
-	struct nvram_header *header;
-	int i;
-	u32 base, lim, off;
-	u32 *src, *dst;
-	
-	base = mcore->flash_window;
-	lim = mcore->flash_window_size;
-	cfe_env = 0;
-
-	
-	/* XXX: hack for supporting the CFE environment stuff on WGT634U */
-	if (lim >= 8 MB) {
-		src = (u32 *) KSEG1ADDR(base + 8 MB - 0x2000);
-		dst = (u32 *) nvram_buf;
-
-		if ((*src & 0xff00ff) == 0x000001) {
-			printk("early_nvram_init: WGT634U NVRAM found.\n");
-
-			for (i = 0; i < 0x1ff0; i++) {
-				if (*src == 0xFFFFFFFF)
-					break;
-				*dst++ = *src++;
-			}
-			cfe_env = 1;
-			return;
-		}
-	}
-
-	off = 0x20000;
-	while (off <= lim) {
-		/* Windowed flash access */
-		header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE);
-		if (header->magic == NVRAM_HEADER)
-			goto found;
-		off <<= 1;
-	}
-
-	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
-	header = (struct nvram_header *) KSEG1ADDR(base + 4096);
-	if (header->magic == NVRAM_HEADER)
-		goto found;
-	
-	header = (struct nvram_header *) KSEG1ADDR(base + 1024);
-	if (header->magic == NVRAM_HEADER)
-		goto found;
-	
-	return;
-
-found:
-	src = (u32 *) header;
-	dst = (u32 *) nvram_buf;
-	for (i = 0; i < sizeof(struct nvram_header); i += 4)
-		*dst++ = *src++;
-	for (; i < header->len && i < NVRAM_SPACE; i += 4)
-		*dst++ = le32_to_cpu(*src++);
-}
-
-char *nvram_get(const char *name)
-{
-	char *var, *value, *end, *eq;
-
-	if (!name)
-		return NULL;
-
-	if (!nvram_buf[0])
-		early_nvram_init();
-
-	if (cfe_env)
-		return cfe_env_get(nvram_buf, name);
-
-	/* Look for name=value and return value */
-	var = &nvram_buf[sizeof(struct nvram_header)];
-	end = nvram_buf + sizeof(nvram_buf) - 2;
-	end[0] = end[1] = '\0';
-	for (; *var; var = value + strlen(value) + 1) {
-		if (!(eq = strchr(var, '=')))
-			break;
-		value = eq + 1;
-		if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
-			return value;
-	}
-
-	return NULL;
-}
-
-EXPORT_SYMBOL(nvram_get);
--- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/prom.c
+++ b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/prom.c
@ -1,61 +0,0 @@
-/*
- *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/pmon.h>
-#include "../cfe/cfe_private.h"
-
-const char *get_system_type(void)
-{
-	return "Broadcom BCM47xx";
-}
-
-void __init prom_init(void)
-{
-	unsigned long mem;
-
-        mips_machgroup = MACH_GROUP_BRCM;
-        mips_machtype = MACH_BCM47XX;
-
-	cfe_setup(fw_arg0, fw_arg1, fw_arg2, fw_arg3);
-		
-	/* Figure out memory size by finding aliases */
-	for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
-		if (*(unsigned long *)((unsigned long)(prom_init) + mem) == 
-		    *(unsigned long *)(prom_init))
-			break;
-	}
-
-	add_memory_region(0, mem, BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
--- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/setup.c
+++ b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/setup.c
@ -1,246 +0,0 @@
-/*
- *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
- *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
- *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- *  Copyright (C) 2006-2008 Michael Buesch <mb@bu3sch.de>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_8250.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/reboot.h>
-#include <asm/cfe.h>
-#include <linux/pm.h>
-#include <linux/ssb/ssb.h>
-#include <linux/ssb/ssb_embedded.h>
-
-#include <nvram.h>
-
-extern void bcm47xx_pci_init(void);
-extern void bcm47xx_time_init(void);
-
-struct ssb_bus ssb;
-
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	int err;
-
-	err = ssb_pcibios_plat_dev_init(dev);
-	if (err) {
-		printk(KERN_ALERT "PCI: Failed to init device %s\n",
-		       pci_name(dev));
-	}
-
-	return err;
-}
-
-static void bcm47xx_machine_restart(char *command)
-{
-	printk(KERN_ALERT "Please stand by while rebooting the system...\n");
-	local_irq_disable();
-	/* CFE has a reboot callback, but that does not work.
-	 * Oopses with: Reserved instruction in kernel code.
-	 */
-
-	/* Set the watchdog timer to reset immediately */
-	if (ssb_watchdog_timer_set(&ssb, 1))
-		printk(KERN_EMERG "SSB watchdog-triggered reboot failed!\n");
-	while (1)
-		cpu_relax();
-}
-
-static void bcm47xx_machine_halt(void)
-{
-	/* Disable interrupts and watchdog and spin forever */
-	local_irq_disable();
-	if (ssb_watchdog_timer_set(&ssb, 0))
-		printk(KERN_EMERG "Failed to disable SSB watchdog!\n");
-	while (1)
-		cpu_relax();
-}
-
-static void e_aton(char *str, char *dest)
-{
-	int i = 0;
-
-	if (str == NULL) {
-		memset(dest, 0, 6);
-		return;
-	}
-	
-	for (;;) {
-		dest[i++] = (char) simple_strtoul(str, NULL, 16);
-		str += 2;
-		if (!*str++ || i == 6)
-			break;
-	}
-}
-
-static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
-{
-	char *s;
-
-	memset(sprom, 0xFF, sizeof(struct ssb_sprom));
-
-	sprom->revision = 1;
-	if ((s = nvram_get("il0macaddr")))
-		e_aton(s, sprom->il0mac);
-	if ((s = nvram_get("et0macaddr")))
-		e_aton(s, sprom->et0mac);
-	if ((s = nvram_get("et1macaddr")))
-		e_aton(s, sprom->et1mac);
-	if ((s = nvram_get("et0phyaddr")))
-		sprom->et0phyaddr = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("et1phyaddr")))
-		sprom->et1phyaddr = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("et0mdcport")))
-		sprom->et0mdcport = !!simple_strtoul(s, NULL, 10);
-	if ((s = nvram_get("et1mdcport")))
-		sprom->et1mdcport = !!simple_strtoul(s, NULL, 10);
-	if ((s = nvram_get("pa0b0")))
-		sprom->pa0b0 = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("pa0b1")))
-		sprom->pa0b1 = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("pa0b2")))
-		sprom->pa0b2 = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("pa1b0")))
-		sprom->pa1b0 = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("pa1b1")))
-		sprom->pa1b1 = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("pa1b2")))
-		sprom->pa1b2 = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("wl0gpio0")))
-		sprom->gpio0 = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("wl0gpio1")))
-		sprom->gpio1 = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("wl0gpio2")))
-		sprom->gpio2 = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("wl0gpio3")))
-		sprom->gpio3 = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("pa0maxpwr")))
-		sprom->maxpwr_bg = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("pa1maxpwr")))
-		sprom->maxpwr_a = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("pa0itssit")))
-		sprom->itssi_bg = simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("pa1itssit")))
-		sprom->itssi_a = simple_strtoul(s, NULL, 0);
-	sprom->boardflags_lo = 0;
-	if ((s = nvram_get("boardflags")))
-		sprom->boardflags_lo = simple_strtoul(s, NULL, 0);
-	sprom->boardflags_hi = 0;
-	if ((s = nvram_get("boardflags2")))
-		sprom->boardflags_hi = simple_strtoul(s, NULL, 0);
-}
-
-static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv)
-{
-	char *s;
-
-	iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
-	if ((s = nvram_get("boardtype")))
-		iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0);
-	if ((s = nvram_get("boardrev")))
-		iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0);
-
-	bcm47xx_fill_sprom(&iv->sprom);
-
-	if ((s = nvram_get("cardbus")))
-		iv->has_cardbus_slot = !!simple_strtoul(s, NULL, 10);
-
-	return 0;
-}
-
-void __init plat_mem_setup(void)
-{
-	int i, err;
-	char *s;
-	struct ssb_mipscore *mcore;
-
-	err = ssb_bus_ssbbus_register(&ssb, SSB_ENUM_BASE, bcm47xx_get_invariants);
-	if (err) {
-		const char *msg = "Failed to initialize SSB bus (err %d)\n";
-		cfe_printk(msg, err); /* Make sure the message gets out of the box. */
-		panic(msg, err);
-	}
-	mcore = &ssb.mipscore;
-
-	s = nvram_get("kernel_args");
-	if (s && !strncmp(s, "console=ttyS1", 13)) {
-		struct ssb_serial_port port;
-
-		cfe_printk("Swapping serial ports!\n");
-		/* swap serial ports */
-		memcpy(&port, &mcore->serial_ports[0], sizeof(port));
-		memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port));
-		memcpy(&mcore->serial_ports[1], &port, sizeof(port));
-	}
-
-	for (i = 0; i < mcore->nr_serial_ports; i++) {
-		struct ssb_serial_port *port = &(mcore->serial_ports[i]);
-		struct uart_port s;
-	
-		memset(&s, 0, sizeof(s));
-		s.line = i;
-		s.membase = port->regs;
-		s.irq = port->irq + 2;
-		s.uartclk = port->baud_base;
-		s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-		s.iotype = SERIAL_IO_MEM;
-		s.regshift = port->reg_shift;
-
-		early_serial_setup(&s);
-	}
-	cfe_printk("Serial init done.\n");
-
-	_machine_restart = bcm47xx_machine_restart;
-	_machine_halt = bcm47xx_machine_halt;
-	pm_power_off = bcm47xx_machine_halt;
-	board_time_init = bcm47xx_time_init;
-}
-
-static int __init bcm47xx_register_gpiodev(void)
-{
-	static struct resource res = {
-		.start = 0xFFFFFFFF,
-	};
-	struct platform_device *pdev;
-
-	pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
-	if (!pdev) {
-		printk(KERN_ERR "bcm47xx: GPIODEV init failed\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-device_initcall(bcm47xx_register_gpiodev);
-
-EXPORT_SYMBOL(ssb);
--- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/time.c
+++ b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/time.c
@ -1,62 +0,0 @@
-/*
- *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/serial_reg.h>
-#include <linux/interrupt.h>
-#include <linux/ssb/ssb.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/time.h>
-
-extern struct ssb_bus ssb;
-
-void __init
-bcm47xx_time_init(void)
-{
-	unsigned long hz;
-
-	/*
-	 * Use deterministic values for initial counter interrupt
-	 * so that calibrate delay avoids encountering a counter wrap.
-	 */
-	write_c0_count(0);
-	write_c0_compare(0xffff);
-
-	hz = ssb_cpu_clock(&ssb.mipscore) / 2;
-	if (!hz)
-		hz = 100000000;
-
-	/* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
-	mips_hpt_frequency = hz;
-}
-
-void __init
-plat_timer_setup(struct irqaction *irq)
-{
-	/* Enable the timer interrupt */
-	setup_irq(7, irq);
-}
--- a/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/Makefile
+++ b/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/Makefile
@ -1,5 +0,0 @@
-#
-# Makefile for the Broadcom Common Firmware Environment support
-#
-
-obj-y += cfe.o
--- a/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/cfe.c
+++ b/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/cfe.c
@ -1,533 +0,0 @@
-/*
- * Broadcom Common Firmware Environment (CFE) support
- *
- * Copyright 2000, 2001, 2002
- * Broadcom Corporation. All rights reserved.
- *
- * Copyright (C) 2006 Michael Buesch
- *
- * Original Authors:  Mitch Lichtenberg, Chris Demetriou
- *
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- *
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- *
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- *
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <asm/cfe.h>
-
-#include "cfe_private.h"
-
-
-static cfe_uint_t cfe_handle;
-static int (*cfe_trampoline)(long handle, long iocb);
-
-
-#include <linux/kernel.h>
-
-void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1,
-		      unsigned long fwarg2, unsigned long fwarg3)
-{
-	if (fwarg3 == 0x80300000) {
-		/* WRT54G workaround */
-		fwarg3 = CFE_EPTSEAL;
-		fwarg2 = 0xBFC00500;
-	}
-	if (fwarg3 != CFE_EPTSEAL) {
-		/* We are not booted from CFE */
-		return;
-	}
-	if (fwarg1 == 0) {
-		/* We are on the boot CPU */
-		cfe_handle = (cfe_uint_t)fwarg0;
-		cfe_trampoline = CFE_TO_PTR(fwarg2);
-	}
-}
-
-int cfe_vprintk(const char *fmt, va_list args)
-{
-	static char buffer[1024];
-	static DEFINE_SPINLOCK(lock);
-	static const char pfx[] = "CFE-console: ";
-	static const size_t pfx_len = sizeof(pfx) - 1;
-	unsigned long flags;
-	int len, cnt, pos;
-	int handle;
-	int res;
-
-	if (!cfe_present())
-		return -ENODEV;
-
-	spin_lock_irqsave(&lock, flags);
-	handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
-	if (CFE_ISERR(handle)) {
-		len = -EIO;
-		goto out;
-	}
-	strcpy(buffer, pfx);
-	len = vscnprintf(buffer + pfx_len,
-			 sizeof(buffer) - pfx_len - 2,
-			 fmt, args);
-	len += pfx_len;
-	/* The CFE console requires CR-LF line-ends.
-	 * Add a CR, if we only terminate lines with a LF.
-	 * This does only fix CR-LF at the end of the string.
-	 * So for multiple lines, use multiple cfe_vprintk calls.
-	 */
-	if (len > 1 &&
-	    buffer[len - 1] == '\n' && buffer[len - 2] != '\r') {
-		buffer[len - 1] = '\r';
-		buffer[len] = '\n';
-		len += 1;
-	}
-	cnt = len;
-	pos = 0;
-	while (cnt > 0) {
-		res = cfe_write(handle, buffer + pos, len - pos);
-		if (CFE_ISERR(res)) {
-			len = -EIO;
-			goto out;
-		}
-		cnt -= res;
-		pos += res;
-	}
-out:
-	spin_unlock_irqrestore(&lock, flags);
-
-	return len;
-}
-
-int cfe_printk(const char *fmt, ...)
-{
-	va_list args;
-	int res;
-
-	va_start(args, fmt);
-	res = cfe_vprintk(fmt, args);
-	va_end(args);
-
-	return res;
-}
-
-static int cfe_iocb_dispatch(struct cfe_iocb *iocb)
-{
-	if (!cfe_present())
-		return CFE_ERR_UNSUPPORTED;
-	return cfe_trampoline((long)cfe_handle, (long)iocb);
-}
-
-int cfe_present(void)
-{
-	return (cfe_trampoline != NULL);
-}
-
-int cfe_close(int handle)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_CLOSE;
-	iocb.handle = handle;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_FW_CPUCTL;
-	iocb.psize = sizeof(struct cfe_iocb_cpuctl);
-	iocb.cpuctl.number = cpu;
-	iocb.cpuctl.command = CFE_CPU_CMD_START;
-	iocb.cpuctl.gp = gp;
-	iocb.cpuctl.sp = sp;
-	iocb.cpuctl.a1 = a1;
-	iocb.cpuctl.start_addr = (long)fn;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_cpu_stop(int cpu)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_FW_CPUCTL;
-	iocb.psize = sizeof(struct cfe_iocb_cpuctl);
-	iocb.cpuctl.number = cpu;
-	iocb.cpuctl.command = CFE_CPU_CMD_STOP;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_ENV_ENUM;
-	iocb.psize = sizeof(struct cfe_iocb_envbuf);
-	iocb.envbuf.index = idx;
-	iocb.envbuf.name = PTR_TO_CFE(name);
-	iocb.envbuf.name_len = namelen;
-	iocb.envbuf.val = PTR_TO_CFE(val);
-	iocb.envbuf.val_len = vallen;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_enumdev(int idx, char *name, int namelen)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-
-	iocb.fcode = CFE_CMD_DEV_ENUM;
-	iocb.psize = sizeof(struct cfe_iocb_envbuf);
-	iocb.envbuf.index = idx;
-	iocb.envbuf.name = PTR_TO_CFE(name);
-	iocb.envbuf.name_len = namelen;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_enummem(int idx, int flags, u64 *start, u64 *length,
-		u64 *type)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-
-	iocb.fcode = CFE_CMD_FW_MEMENUM;
-	iocb.flags = flags;
-	iocb.psize = sizeof(struct cfe_iocb_meminfo);
-	iocb.meminfo.index = idx;
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (!CFE_ISERR(iocb.status)) {
-		*start = iocb.meminfo.addr;
-		*length = iocb.meminfo.size;
-		*type = iocb.meminfo.type;
-	}
-
-	return iocb.status;
-}
-
-int cfe_exit(int warm, int status)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-printk("CFE REBOOT\n");
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_FW_RESTART;
-	if (warm)
-		iocb.flags = CFE_FLG_WARMSTART;
-	iocb.psize = sizeof(struct cfe_iocb_exitstat);
-	iocb.exitstat.status = status;
-
-printk("CALL\n");
-	err = cfe_iocb_dispatch(&iocb);
-printk("DONE\n");
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_flushcache(int flags)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_FW_FLUSHCACHE;
-	iocb.flags = flags;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_getdevinfo(char *name)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_GETINFO;
-	iocb.psize = sizeof(struct cfe_iocb_buf);
-	iocb.buffer.ptr = PTR_TO_CFE(name);
-	iocb.buffer.length = strlen(name);
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-
-	return iocb.buffer.devflags;
-}
-
-int cfe_getenv(char *name, char *dest, int destlen)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	dest[0] = '\0';
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_ENV_GET;
-	iocb.psize = sizeof(struct cfe_iocb_envbuf);
-	iocb.envbuf.name = PTR_TO_CFE(name);
-	iocb.envbuf.name_len = strlen(name);
-	iocb.envbuf.val = PTR_TO_CFE(dest);
-	iocb.envbuf.val_len = destlen;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_getfwinfo(struct cfe_fwinfo *info)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_FW_GETINFO;
-	iocb.psize = sizeof(struct cfe_iocb_fwinfo);
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return err;
-
-	info->version = iocb.fwinfo.version;
-	info->totalmem = iocb.fwinfo.totalmem;
-	info->flags = iocb.fwinfo.flags;
-	info->boardid = iocb.fwinfo.boardid;
-	info->bootarea_va = iocb.fwinfo.bootarea_va;
-	info->bootarea_pa = iocb.fwinfo.bootarea_pa;
-	info->bootarea_size = iocb.fwinfo.bootarea_size;
-
-	return iocb.status;
-}
-
-int cfe_getstdhandle(int handletype)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_GETHANDLE;
-	iocb.flags = handletype;
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-
-	return iocb.handle;
-}
-
-int cfe_getticks(s64 *ticks)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_FW_GETTIME;
-	iocb.psize = sizeof(struct cfe_iocb_time);
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (!CFE_ISERR(iocb.status))
-		*ticks = iocb.time.ticks;
-
-	return iocb.status;
-}
-
-int cfe_inpstat(int handle)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_INPSTAT;
-	iocb.handle = handle;
-	iocb.psize = sizeof(struct cfe_iocb_inpstat);
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-
-	return iocb.inpstat.status;
-}
-
-int cfe_ioctl(int handle, unsigned int ioctlnum,
-	      unsigned char *buffer, int length,
-	      int *retlen, u64 offset)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_IOCTL;
-	iocb.handle = handle;
-	iocb.psize = sizeof(struct cfe_iocb_buf);
-	iocb.buffer.offset = offset;
-	iocb.buffer.ioctlcmd = ioctlnum;
-	iocb.buffer.ptr = PTR_TO_CFE(buffer);
-	iocb.buffer.length = length;
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-	if (retlen)
-		*retlen = iocb.buffer.retlen;
-
-	return iocb.status;
-}
-
-int cfe_open(char *name)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_OPEN;
-	iocb.psize = sizeof(struct cfe_iocb_buf);
-	iocb.buffer.ptr = PTR_TO_CFE(name);
-	iocb.buffer.length = strlen(name);
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-
-	return iocb.handle;
-}
-
-int cfe_read(int handle, unsigned char *buffer, int length)
-{
-	return cfe_readblk(handle, 0, buffer, length);
-}
-
-int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_READ;
-	iocb.handle = handle;
-	iocb.psize = sizeof(struct cfe_iocb_buf);
-	iocb.buffer.offset = offset;
-	iocb.buffer.ptr = PTR_TO_CFE(buffer);
-	iocb.buffer.length = length;
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-
-	return iocb.buffer.retlen;
-}
-
-int cfe_setenv(char *name, char *val)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_ENV_SET;
-	iocb.psize = sizeof(struct cfe_iocb_envbuf);
-	iocb.envbuf.name = PTR_TO_CFE(name);
-	iocb.envbuf.name_len = strlen(name);
-	iocb.envbuf.val = PTR_TO_CFE(val);
-	iocb.envbuf.val_len = strlen(val);
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_write(int handle, unsigned char *buffer, int length)
-{
-	return cfe_writeblk(handle, 0, buffer, length);
-}
-
-int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, int length)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_WRITE;
-	iocb.handle = handle;
-	iocb.psize = sizeof(struct cfe_iocb_buf);
-	iocb.buffer.offset = offset;
-	iocb.buffer.ptr = PTR_TO_CFE(buffer);
-	iocb.buffer.length = length;
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-
-	return iocb.buffer.retlen;
-}
--- a/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/cfe_private.h
+++ b/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/cfe_private.h
@ -1,176 +0,0 @@
-/*
- * Broadcom Common Firmware Environment (CFE) support
- *
- * Copyright 2000, 2001, 2002
- * Broadcom Corporation. All rights reserved.
- *
- * Copyright (C) 2006 Michael Buesch
- *
- * Original Authors:  Mitch Lichtenberg, Chris Demetriou
- *
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- *
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- *
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- *
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef LINUX_CFE_PRIVATE_H_
-#define LINUX_CFE_PRIVATE_H_
-
-#ifndef __ASSEMBLY__
-
-/* Seal indicating CFE's presence, passed to the kernel. */
-#define CFE_EPTSEAL		0x43464531
-
-#define CFE_CMD_FW_GETINFO	0
-#define CFE_CMD_FW_RESTART	1
-#define CFE_CMD_FW_BOOT		2
-#define CFE_CMD_FW_CPUCTL	3
-#define CFE_CMD_FW_GETTIME      4
-#define CFE_CMD_FW_MEMENUM	5
-#define CFE_CMD_FW_FLUSHCACHE	6
-
-#define CFE_CMD_DEV_GETHANDLE	9
-#define CFE_CMD_DEV_ENUM	10
-#define CFE_CMD_DEV_OPEN	11
-#define CFE_CMD_DEV_INPSTAT	12
-#define CFE_CMD_DEV_READ	13
-#define CFE_CMD_DEV_WRITE	14
-#define CFE_CMD_DEV_IOCTL	15
-#define CFE_CMD_DEV_CLOSE	16
-#define CFE_CMD_DEV_GETINFO	17
-
-#define CFE_CMD_ENV_ENUM	20
-#define CFE_CMD_ENV_GET		22
-#define CFE_CMD_ENV_SET		23
-#define CFE_CMD_ENV_DEL		24
-
-#define CFE_CMD_MAX		32
-
-#define CFE_CMD_VENDOR_USE	0x8000	/* codes above this are for customer use */
-
-typedef u64 cfe_uint_t;
-typedef s64 cfe_int_t;
-typedef s64 cfe_ptr_t;
-
-/* Cast a pointer from native to CFE-API pointer and back */
-#define CFE_TO_PTR(p)		((void *)(unsigned long)(p))
-#define PTR_TO_CFE(p)		((cfe_ptr_t)(unsigned long)(p))
-
-struct cfe_iocb_buf {
-	cfe_uint_t	offset;		/* offset on device (bytes) */
-	cfe_ptr_t	ptr;		/* pointer to a buffer */
-	cfe_uint_t	length;		/* length of this buffer */
-	cfe_uint_t	retlen;		/* returned length (for read ops) */
-	union {
-		cfe_uint_t	ioctlcmd;	/* IOCTL command (used only for IOCTLs) */
-		cfe_uint_t	devflags;	/* Returned device info flags */
-	};
-};
-
-struct cfe_iocb_inpstat {
-	cfe_uint_t	status;		/* 1 means input available */
-};
-
-struct cfe_iocb_envbuf {
-	cfe_int_t	index;		/* 0-based enumeration index */
-	cfe_ptr_t	name;		/* name string buffer */
-	cfe_int_t	name_len;	/* size of name buffer */
-	cfe_ptr_t	val;		/* value string buffer */
-	cfe_int_t	val_len;	/* size of value string buffer */
-};
-
-struct cfe_iocb_cpuctl {
-	cfe_uint_t	number;		/* cpu number to control */
-	cfe_uint_t	command;	/* command to issue to CPU */
-	cfe_uint_t	start_addr;	/* CPU start address */
-	cfe_uint_t	gp;		/* starting GP value */
-	cfe_uint_t	sp;		/* starting SP value */
-	cfe_uint_t	a1;		/* starting A1 value */
-};
-
-struct cfe_iocb_time {
-	cfe_int_t	ticks;		/* current time in ticks */
-};
-
-struct cfe_iocb_exitstat {
-	cfe_int_t	status;
-};
-
-struct cfe_iocb_meminfo {
-	cfe_int_t	index;		/* 0-based enumeration index */
-	cfe_int_t	type;		/* type of memory block */
-	cfe_uint_t	addr;		/* physical start address */
-	cfe_uint_t	size;		/* block size */
-};
-
-struct cfe_iocb_fwinfo {
-	cfe_int_t	version;	/* major, minor, eco version */
-	cfe_int_t	totalmem;	/* total installed mem */
-	cfe_int_t	flags;		/* various flags */
-	cfe_int_t	boardid;	/* board ID */
-	cfe_int_t	bootarea_va;	/* VA of boot area */
-	cfe_int_t	bootarea_pa;	/* PA of boot area */
-	cfe_int_t	bootarea_size;	/* size of boot area */
-	cfe_int_t	reserved1;
-	cfe_int_t	reserved2;
-	cfe_int_t	reserved3;
-};
-
-/* CFE I/O Control Block */
-struct cfe_iocb {
-	cfe_uint_t	fcode;		/* IOCB function code */
-	cfe_int_t	status;		/* return status */
-	cfe_int_t	handle;		/* file/device handle */
-	cfe_uint_t	flags;		/* flags for this IOCB */
-	cfe_uint_t	psize;		/* size of parameter list */
-	union {
-		struct cfe_iocb_buf		buffer;		/* buffer parameters */
-		struct cfe_iocb_inpstat		inpstat;	/* input status parameters */
-		struct cfe_iocb_envbuf		envbuf;		/* environment function parameters */
-		struct cfe_iocb_cpuctl		cpuctl;		/* CPU control parameters */
-		struct cfe_iocb_time		time;		/* timer parameters */
-		struct cfe_iocb_meminfo		meminfo;	/* memory arena info parameters */
-		struct cfe_iocb_fwinfo		fwinfo;		/* firmware information */
-		struct cfe_iocb_exitstat	exitstat;	/* Exit Status */
-	};
-};
-
-
-#include <linux/init.h>
-
-void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1,
-		      unsigned long fwarg2, unsigned long fwarg3);
-
-#else /* __ASSEMBLY__ */
-
-	.macro	cfe_early_init
-#ifdef CONFIG_CFE
-		jal	cfe_setup
-#endif
-	.endm
-
-#endif /* __ASSEMBLY__ */
-#endif /* LINUX_CFE_PRIVATE_H_ */
--- a/target/linux/brcm47xx/files-2.6.23/drivers/mtd/maps/bcm47xx-flash.c
+++ b/target/linux/brcm47xx/files-2.6.23/drivers/mtd/maps/bcm47xx-flash.c
@ -1,439 +0,0 @@
-/*
- *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
- *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
- *
- *  original functions for finding root filesystem from Mike Baker 
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- * 
- *  Copyright 2001-2003, Broadcom Corporation
- *  All Rights Reserved.
- * 
- *  THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- *  KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- *  SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- *  FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- *  Flash mapping for BCM947XX boards
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-#include <linux/crc32.h>
-#ifdef CONFIG_SSB
-#include <linux/ssb/ssb.h>
-#endif
-#include <asm/io.h>
-
-
-#define TRX_MAGIC	0x30524448	/* "HDR0" */
-#define TRX_VERSION	1
-#define TRX_MAX_LEN	0x3A0000
-#define TRX_NO_HEADER	1		/* Do not write TRX header */	
-#define TRX_GZ_FILES	0x2     /* Contains up to TRX_MAX_OFFSET individual gzip files */
-#define TRX_MAX_OFFSET	3
-
-struct trx_header {
-	u32 magic;		/* "HDR0" */
-	u32 len;		/* Length of file including header */
-	u32 crc32;		/* 32-bit CRC from flag_version to end of file */
-	u32 flag_version;	/* 0:15 flags, 16:31 version */
-	u32 offsets[TRX_MAX_OFFSET];	/* Offsets of partitions from start of header */
-};
-
-#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
-#define NVRAM_SPACE 0x8000
-#define WINDOW_ADDR 0x1fc00000
-#define WINDOW_SIZE 0x400000
-#define BUSWIDTH 2
-
-#ifdef CONFIG_SSB
-extern struct ssb_bus ssb;
-#endif
-static struct mtd_info *bcm947xx_mtd;
-
-static void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
-	if (len==1) {
-		memcpy_fromio(to, map->virt + from, len);
-	} else {
-		int i;
-		u16 *dest = (u16 *) to;
-		u16 *src  = (u16 *) (map->virt + from);
-		for (i = 0; i < (len / 2); i++) {
-			dest[i] = src[i];
-		}
-		if (len & 1)
-			*((u8 *)dest+len-1) = src[i] & 0xff;
-	}
-}
-
-static struct map_info bcm947xx_map = {
-	name: "Physically mapped flash",
-	size: WINDOW_SIZE,
-	bankwidth: BUSWIDTH,
-	phys: WINDOW_ADDR,
-};
-
-#ifdef CONFIG_MTD_PARTITIONS
-
-static struct mtd_partition bcm947xx_parts[] = {
-	{ name: "cfe",	offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
-	{ name: "linux", offset: 0, size: 0, },
-	{ name: "rootfs", offset: 0, size: 0, },
-	{ name: "nvram", offset: 0, size: 0, },
-	{ name: NULL, },
-};
-
-static int __init
-find_cfe_size(struct mtd_info *mtd, size_t size)
-{
-	struct trx_header *trx;
-	unsigned char buf[512];
-	int off;
-	size_t len;
-	int blocksize;
-
-	trx = (struct trx_header *) buf;
-
-	blocksize = mtd->erasesize;
-	if (blocksize < 0x10000)
-		blocksize = 0x10000;
-
-	for (off = (128*1024); off < size; off += blocksize) {
-		memset(buf, 0xe5, sizeof(buf));
-
-		/*
-		 * Read into buffer 
-		 */
-		if (mtd->read(mtd, off, sizeof(buf), &len, buf) ||
-		    len != sizeof(buf))
-			continue;
-
-		/* found a TRX header */
-		if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
-			goto found;
-		}
-	}
-
-	printk(KERN_NOTICE
-	       "%s: Couldn't find bootloader size\n",
-	       mtd->name);
-	return -1;
-
- found:
-	printk(KERN_NOTICE "bootloader size: %d\n", off);
-	return off;
-
-}
-
-/*
- * Copied from mtdblock.c
- *
- * Cache stuff...
- * 
- * Since typical flash erasable sectors are much larger than what Linux's
- * buffer cache can handle, we must implement read-modify-write on flash
- * sectors for each block write requests.  To avoid over-erasing flash sectors
- * and to speed things up, we locally cache a whole flash sector while it is
- * being written to until a different sector is required.
- */
-
-static void erase_callback(struct erase_info *done)
-{
-	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
-	wake_up(wait_q);
-}
-
-static int erase_write (struct mtd_info *mtd, unsigned long pos, 
-			int len, const char *buf)
-{
-	struct erase_info erase;
-	DECLARE_WAITQUEUE(wait, current);
-	wait_queue_head_t wait_q;
-	size_t retlen;
-	int ret;
-
-	/*
-	 * First, let's erase the flash block.
-	 */
-
-	init_waitqueue_head(&wait_q);
-	erase.mtd = mtd;
-	erase.callback = erase_callback;
-	erase.addr = pos;
-	erase.len = len;
-	erase.priv = (u_long)&wait_q;
-
-	set_current_state(TASK_INTERRUPTIBLE);
-	add_wait_queue(&wait_q, &wait);
-
-	ret = mtd->erase(mtd, &erase);
-	if (ret) {
-		set_current_state(TASK_RUNNING);
-		remove_wait_queue(&wait_q, &wait);
-		printk (KERN_WARNING "erase of region [0x%lx, 0x%x] "
-				     "on \"%s\" failed\n",
-			pos, len, mtd->name);
-		return ret;
-	}
-
-	schedule();  /* Wait for erase to finish. */
-	remove_wait_queue(&wait_q, &wait);
-
-	/*
-	 * Next, writhe data to flash.
-	 */
-
-	ret = mtd->write (mtd, pos, len, &retlen, buf);
-	if (ret)
-		return ret;
-	if (retlen != len)
-		return -EIO;
-	return 0;
-}
-
-
-
-
-static int __init
-find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
-{
-	struct trx_header trx, *trx2;
-	unsigned char buf[512], *block;
-	int off, blocksize;
-	u32 i, crc = ~0;
-	size_t len;
-	struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
-
-	blocksize = mtd->erasesize;
-	if (blocksize < 0x10000)
-		blocksize = 0x10000;
-
-	for (off = (128*1024); off < size; off += blocksize) {
-		memset(&trx, 0xe5, sizeof(trx));
-
-		/*
-		 * Read into buffer 
-		 */
-		if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
-		    len != sizeof(trx))
-			continue;
-
-		/* found a TRX header */
-		if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
-			part->offset = le32_to_cpu(trx.offsets[2]) ? : 
-				le32_to_cpu(trx.offsets[1]);
-			part->size = le32_to_cpu(trx.len); 
-
-			part->size -= part->offset;
-			part->offset += off;
-
-			goto found;
-		}
-	}
-
-	printk(KERN_NOTICE
-	       "%s: Couldn't find root filesystem\n",
-	       mtd->name);
-	return -1;
-
- found:
-	if (part->size == 0)
-		return 0;
-	
-	if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf))
-		return 0;
-
-	/* Move the fs outside of the trx */
-	part->size = 0;
-
-	if (trx.len != part->offset + part->size - off) {
-		/* Update the trx offsets and length */
-		trx.len = part->offset + part->size - off;
-	
-		/* Update the trx crc32 */
-		for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) {
-			if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf))
-				return 0;
-			crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i));
-		}
-		trx.crc32 = crc;
-
-		/* read first eraseblock from the trx */
-		block = kmalloc(mtd->erasesize, GFP_KERNEL);
-		trx2 = (struct trx_header *) block;
-		if (mtd->read(mtd, off, mtd->erasesize, &len, block) || len != mtd->erasesize) {
-			printk("Error accessing the first trx eraseblock\n");
-			return 0;
-		}
-		
-		printk("Updating TRX offsets and length:\n");
-		printk("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32);
-		printk("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n",   trx.offsets[0],   trx.offsets[1],   trx.offsets[2],   trx.len, trx.crc32);
-
-		/* Write updated trx header to the flash */
-		memcpy(block, &trx, sizeof(trx));
-		if (mtd->unlock)
-			mtd->unlock(mtd, off, mtd->erasesize);
-		erase_write(mtd, off, mtd->erasesize, block);
-		if (mtd->sync)
-			mtd->sync(mtd);
-		kfree(block);
-		printk("Done\n");
-	}
-	
-	return part->size;
-}
-
-struct mtd_partition * __init
-init_mtd_partitions(struct mtd_info *mtd, size_t size)
-{
-	int cfe_size;
-
-	if ((cfe_size = find_cfe_size(mtd,size)) < 0)
-		return NULL;
-
-	/* boot loader */
-	bcm947xx_parts[0].offset = 0;
-	bcm947xx_parts[0].size   = cfe_size;
-
-	/* nvram */
-	if (cfe_size != 384 * 1024) {
-		bcm947xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize);
-		bcm947xx_parts[3].size   = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
-	} else {
-		/* nvram (old 128kb config partition on netgear wgt634u) */
-		bcm947xx_parts[3].offset = bcm947xx_parts[0].size;
-		bcm947xx_parts[3].size   = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
-	}
-
-	/* linux (kernel and rootfs) */
-	if (cfe_size != 384 * 1024) {
-		bcm947xx_parts[1].offset = bcm947xx_parts[0].size;
-		bcm947xx_parts[1].size   = bcm947xx_parts[3].offset - 
-			bcm947xx_parts[1].offset;
-	} else {
-		/* do not count the elf loader, which is on one block */
-		bcm947xx_parts[1].offset = bcm947xx_parts[0].size + 
-			bcm947xx_parts[3].size + mtd->erasesize;
-		bcm947xx_parts[1].size   = size - 
-			bcm947xx_parts[0].size - 
-			(2*bcm947xx_parts[3].size) - 
-			mtd->erasesize;
-	}
-
-	/* find and size rootfs */
-	find_root(mtd,size,&bcm947xx_parts[2]);
-	bcm947xx_parts[2].size = size - bcm947xx_parts[2].offset - bcm947xx_parts[3].size;
-
-	return bcm947xx_parts;
-}
-#endif
-
-int __init init_bcm947xx_map(void)
-{
-#ifdef CONFIG_SSB
-	struct ssb_mipscore *mcore = &ssb.mipscore;
-#endif
-	size_t size;
-	int ret = 0;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *parts;
-	int i;
-#endif
-
-#ifdef CONFIG_SSB
-	u32 window = mcore->flash_window;
-	u32 window_size = mcore->flash_window_size;
-
-	printk("flash init: 0x%08x 0x%08x\n", window, window_size);
-	bcm947xx_map.phys = window;
-	bcm947xx_map.size = window_size;
-	bcm947xx_map.virt = ioremap_nocache(window, window_size);
-#else
-	printk("flash init: 0x%08x 0x%08x\n", WINDOW_ADDR, WINDOW_SIZE);
-	bcm947xx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
-#endif
-
-	if (!bcm947xx_map.virt) {
-		printk("Failed to ioremap\n");
-		return -EIO;
-	}
-
-	simple_map_init(&bcm947xx_map);
-	
-	if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) {
-		printk("Failed to do_map_probe\n");
-		iounmap((void *)bcm947xx_map.virt);
-		return -ENXIO;
-	}
-
-	/* override copy_from routine */
- 	bcm947xx_map.copy_from = bcm947xx_map_copy_from;
-
-	bcm947xx_mtd->owner = THIS_MODULE;
-
-	size = bcm947xx_mtd->size;
-
-	printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, WINDOW_ADDR);
-
-#ifdef CONFIG_MTD_PARTITIONS
-	parts = init_mtd_partitions(bcm947xx_mtd, size);
-	for (i = 0; parts[i].name; i++);
-	ret = add_mtd_partitions(bcm947xx_mtd, parts, i);
-	if (ret) {
-		printk(KERN_ERR "Flash: add_mtd_partitions failed\n");
-		goto fail;
-	}
-#endif
-	return 0;
-
- fail:
-	if (bcm947xx_mtd)
-		map_destroy(bcm947xx_mtd);
-	if (bcm947xx_map.virt)
-		iounmap((void *)bcm947xx_map.virt);
-	bcm947xx_map.virt = 0;
-	return ret;
-}
-
-void __exit cleanup_bcm947xx_map(void)
-{
-#ifdef CONFIG_MTD_PARTITIONS
-	del_mtd_partitions(bcm947xx_mtd);
-#endif
-	map_destroy(bcm947xx_mtd);
-	iounmap((void *)bcm947xx_map.virt);
-}
-
-module_init(init_bcm947xx_map);
-module_exit(cleanup_bcm947xx_map);
--- a/target/linux/brcm47xx/files-2.6.23/include/asm-mips/cfe.h
+++ b/target/linux/brcm47xx/files-2.6.23/include/asm-mips/cfe.h
@ -1,189 +0,0 @@
-/*
- * Broadcom Common Firmware Environment (CFE) support
- *
- * Copyright 2000, 2001, 2002
- * Broadcom Corporation. All rights reserved.
- *
- * Copyright (C) 2006 Michael Buesch
- *
- * Original Authors:  Mitch Lichtenberg, Chris Demetriou
- *
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- *
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- *
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- *
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef LINUX_CFE_API_H_
-#define LINUX_CFE_API_H_
-
-#include <linux/types.h>
-
-
-#define CFE_MI_RESERVED		0		/* memory is reserved, do not use */
-#define CFE_MI_AVAILABLE	1		/* memory is available */
-
-#define CFE_FLG_WARMSTART	0x00000001
-#define CFE_FLG_FULL_ARENA	0x00000001
-#define CFE_FLG_ENV_PERMANENT	0x00000001
-
-#define CFE_CPU_CMD_START	1
-#define CFE_CPU_CMD_STOP	0
-
-#define CFE_STDHANDLE_CONSOLE	0
-
-#define CFE_DEV_NETWORK 	1
-#define CFE_DEV_DISK		2
-#define CFE_DEV_FLASH		3
-#define CFE_DEV_SERIAL		4
-#define CFE_DEV_CPU		5
-#define CFE_DEV_NVRAM		6
-#define CFE_DEV_CLOCK           7
-#define CFE_DEV_OTHER		8
-#define CFE_DEV_MASK		0x0F
-
-#define CFE_CACHE_FLUSH_D	1
-#define CFE_CACHE_INVAL_I	2
-#define CFE_CACHE_INVAL_D	4
-#define CFE_CACHE_INVAL_L2	8
-
-#define CFE_FWI_64BIT		0x00000001
-#define CFE_FWI_32BIT		0x00000002
-#define CFE_FWI_RELOC		0x00000004
-#define CFE_FWI_UNCACHED	0x00000008
-#define CFE_FWI_MULTICPU	0x00000010
-#define CFE_FWI_FUNCSIM		0x00000020
-#define CFE_FWI_RTLSIM		0x00000040
-
-struct cfe_fwinfo {
-	s64 version;		/* major, minor, eco version */
-	s64 totalmem;		/* total installed mem */
-	s64 flags;		/* various flags */
-	s64 boardid;		/* board ID */
-	s64 bootarea_va;	/* VA of boot area */
-	s64 bootarea_pa;	/* PA of boot area */
-	s64 bootarea_size;	/* size of boot area */
-};
-
-
-/* The public CFE API */
-
-int cfe_present(void);	/* Check if we booted from CFE. Returns bool */
-
-int cfe_getticks(s64 *ticks);
-int cfe_close(int handle);
-int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1);
-int cfe_cpu_stop(int cpu);
-int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen);
-int cfe_enumdev(int idx, char *name, int namelen);
-int cfe_enummem(int idx, int flags, u64 *start, u64 *length,
-		u64 *type);
-int cfe_exit(int warm, int status);
-int cfe_flushcache(int flags);
-int cfe_getdevinfo(char *name);
-int cfe_getenv(char *name, char *dest, int destlen);
-int cfe_getfwinfo(struct cfe_fwinfo *info);
-int cfe_getstdhandle(int handletype);
-int cfe_inpstat(int handle);
-int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer,
-	      int length, int *retlen, u64 offset);
-int cfe_open(char *name);
-int cfe_read(int handle, unsigned char *buffer, int length);
-int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length);
-int cfe_setenv(char *name, char *val);
-int cfe_write(int handle, unsigned char *buffer, int length);
-int cfe_writeblk(int handle, s64 offset, unsigned char *buffer,
-		 int length);
-
-
-/* High level API */
-
-/* Print some information to CFE's console (most likely serial line) */
-int cfe_printk(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
-int cfe_vprintk(const char *fmt, va_list args);
-
-
-
-/* Error codes returned by the low API functions */
-
-#define CFE_ISERR(errcode)	(errcode < 0)
-
-#define CFE_OK			 0
-#define CFE_ERR                 -1	/* generic error */
-#define CFE_ERR_INV_COMMAND	-2
-#define CFE_ERR_EOF		-3
-#define CFE_ERR_IOERR		-4
-#define CFE_ERR_NOMEM		-5
-#define CFE_ERR_DEVNOTFOUND	-6
-#define CFE_ERR_DEVOPEN		-7
-#define CFE_ERR_INV_PARAM	-8
-#define CFE_ERR_ENVNOTFOUND	-9
-#define CFE_ERR_ENVREADONLY	-10
-
-#define CFE_ERR_NOTELF		-11
-#define CFE_ERR_NOT32BIT 	-12
-#define CFE_ERR_WRONGENDIAN 	-13
-#define CFE_ERR_BADELFVERS 	-14
-#define CFE_ERR_NOTMIPS 	-15
-#define CFE_ERR_BADELFFMT 	-16
-#define CFE_ERR_BADADDR 	-17
-
-#define CFE_ERR_FILENOTFOUND	-18
-#define CFE_ERR_UNSUPPORTED	-19
-
-#define CFE_ERR_HOSTUNKNOWN	-20
-
-#define CFE_ERR_TIMEOUT		-21
-
-#define CFE_ERR_PROTOCOLERR	-22
-
-#define CFE_ERR_NETDOWN		-23
-#define CFE_ERR_NONAMESERVER	-24
-
-#define CFE_ERR_NOHANDLES	-25
-#define CFE_ERR_ALREADYBOUND	-26
-
-#define CFE_ERR_CANNOTSET	-27
-#define CFE_ERR_NOMORE		-28
-#define CFE_ERR_BADFILESYS	-29
-#define CFE_ERR_FSNOTAVAIL	-30
-
-#define CFE_ERR_INVBOOTBLOCK	-31
-#define CFE_ERR_WRONGDEVTYPE	-32
-#define CFE_ERR_BBCHECKSUM	-33
-#define CFE_ERR_BOOTPROGCHKSUM	-34
-
-#define CFE_ERR_LDRNOTAVAIL	-35
-
-#define CFE_ERR_NOTREADY	-36
-
-#define CFE_ERR_GETMEM          -37
-#define CFE_ERR_SETMEM          -38
-
-#define CFE_ERR_NOTCONN		-39
-#define CFE_ERR_ADDRINUSE	-40
-
-
-#endif /* LINUX_CFE_API_H_ */
--- a/target/linux/brcm47xx/files-2.6.23/include/asm-mips/mach-bcm947xx/gpio.h
+++ b/target/linux/brcm47xx/files-2.6.23/include/asm-mips/mach-bcm947xx/gpio.h
@ -1,67 +0,0 @@
-#ifndef __BCM947XX_GPIO_H
-#define __BCM947XX_GPIO_H
-
-#include <linux/ssb/ssb_embedded.h>
-
-extern struct ssb_bus ssb;
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	ssb_gpio_outen(&ssb, 1 << gpio, 0);
-	return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	ssb_gpio_out(&ssb, 1 << gpio, (value ? 1 << gpio : 0));
-	ssb_gpio_outen(&ssb, 1 << gpio, 1 << gpio);
-	return 0;
-}
-
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	struct ssb_device *dev;
-
-	dev = ssb.chipco.dev;
-	if (!dev)
-		dev = ssb.extif.dev;
-	if (!dev)
-		return -EINVAL;
-
-	return ssb_mips_irq(dev) + 2;
-}
-
-static inline int irq_to_gpio(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return !!ssb_gpio_in(&ssb, 1 << gpio);
-}
-
-static inline int gpio_set_value(unsigned gpio, int value)
-{
-	ssb_gpio_out(&ssb, 1 << gpio, (value ? 1 << gpio : 0));
-	return 0;
-}
-
-
-/* cansleep wrappers */
-#include <asm-generic/gpio.h>
-
-
-#endif /* __BCM947XX_GPIO_H */
-
--- a/target/linux/brcm47xx/files-2.6.23/include/asm-mips/mach-bcm947xx/kernel-entry-init.h
+++ b/target/linux/brcm47xx/files-2.6.23/include/asm-mips/mach-bcm947xx/kernel-entry-init.h
@ -1,26 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 Embedded Alley Solutions, Inc
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2006 Michael Buesch
- */
-#ifndef __ASM_MACH_GENERIC_KERNEL_ENTRY_H
-#define __ASM_MACH_GENERIC_KERNEL_ENTRY_H
-
-/* Intentionally empty macro, used in head.S. Override in
- * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
- */
-	.macro	kernel_entry_setup
-	.endm
-
-/*
- * Do SMP slave processor setup necessary before we can savely execute C code.
- */
-	.macro	smp_slave_setup
-	.endm
-
-
-#endif /* __ASM_MACH_GENERIC_KERNEL_ENTRY_H */
--- a/target/linux/brcm47xx/patches-2.6.23/001-ssb-fix-gpio-api.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/001-ssb-fix-gpio-api.patch
@ -1,152 +0,0 @@
--- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -39,12 +39,14 @@
- 	ssb_write32(cc->dev, offset, value);
- }
- 
-static inline void chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
-					 u32 mask, u32 value)
-+static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
-+					u32 mask, u32 value)
- {
- 	value &= mask;
- 	value |= chipco_read32(cc, offset) & ~mask;
- 	chipco_write32(cc, offset, value);
-+
-+	return value;
- }
- 
- void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
-@@ -355,16 +357,37 @@
- {
- 	return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
- }
-+EXPORT_SYMBOL(ssb_chipco_gpio_in);
-+
-+u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
-+{
-+	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
-+}
-+EXPORT_SYMBOL(ssb_chipco_gpio_out);
-+
-+u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
-+{
-+	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
-+}
-+EXPORT_SYMBOL(ssb_chipco_gpio_outen);
-+
-+u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
-+{
-+	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
-+}
-+EXPORT_SYMBOL(ssb_chipco_gpio_control);
- 
-void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
-+u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
-	chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
-+	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
- }
-+EXPORT_SYMBOL(ssb_chipco_gpio_intmask);
- 
-void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
-+u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
-	chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
-+	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
- }
-+EXPORT_SYMBOL(ssb_chipco_gpio_polarity);
- 
- #ifdef CONFIG_SSB_SERIAL
- int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
--- a/drivers/ssb/driver_extif.c
-+++ b/drivers/ssb/driver_extif.c
-@@ -27,12 +27,14 @@
- 	ssb_write32(extif->dev, offset, value);
- }
- 
-static inline void extif_write32_masked(struct ssb_extif *extif, u16 offset,
-					u32 mask, u32 value)
-+static inline u32 extif_write32_masked(struct ssb_extif *extif, u16 offset,
-+				       u32 mask, u32 value)
- {
- 	value &= mask;
- 	value |= extif_read32(extif, offset) & ~mask;
- 	extif_write32(extif, offset, value);
-+
-+	return value;
- }
- 
- #ifdef CONFIG_SSB_SERIAL
-@@ -114,16 +116,30 @@
- {
- 	return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
- }
-+EXPORT_SYMBOL(ssb_extif_gpio_in);
- 
-void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
-+u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
- {
- 	return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
- 				   mask, value);
- }
-+EXPORT_SYMBOL(ssb_extif_gpio_out);
- 
-void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
-+u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
- {
- 	return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
- 				   mask, value);
- }
-+EXPORT_SYMBOL(ssb_extif_gpio_outen);
-+
-+u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value)
-+{
-+	return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
-+}
-+EXPORT_SYMBOL(ssb_extif_gpio_polarity);
- 
-+u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value)
-+{
-+	return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
-+}
-+EXPORT_SYMBOL(ssb_extif_gpio_intmask);
--- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -382,11 +382,13 @@
- extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
- 					  u32 ticks);
- 
-+/* Chipcommon GPIO pin access. */
- u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask);
-
-void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value);
-
-void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value);
-+u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value);
-+u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value);
-+u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
-+u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
-+u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
- 
- #ifdef CONFIG_SSB_SERIAL
- extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
--- a/include/linux/ssb/ssb_driver_extif.h
-+++ b/include/linux/ssb/ssb_driver_extif.h
-@@ -171,11 +171,12 @@
- extern void ssb_extif_timing_init(struct ssb_extif *extif,
- 				  unsigned long ns);
- 
-+/* Extif GPIO pin access */
- u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
-
-void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
-
-void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
-+u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
-+u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
-+u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value);
-+u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value);
- 
- #ifdef CONFIG_SSB_SERIAL
- extern int ssb_extif_serial_init(struct ssb_extif *extif,
--- a/target/linux/brcm47xx/patches-2.6.23/100-board_support.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/100-board_support.patch
@ -1,193 +0,0 @@
--- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -4,6 +4,10 @@
- 	# Horrible source of confusion.  Die, die, die ...
- 	select EMBEDDED
- 
-+config CFE
-+	bool
-+	# Common Firmware Environment
-+
- mainmenu "Linux/MIPS Kernel Configuration"
- 
- menu "Machine selection"
-@@ -44,6 +48,23 @@
- 	  note that a kernel built with this option selected will not be
- 	  able to run on normal units.
- 
-+config BCM947XX
-+	bool "Support for BCM947xx based boards"
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SYS_SUPPORTS_LITTLE_ENDIAN
-+	select SSB
-+	select SSB_SERIAL
-+	select SSB_DRIVER_PCICORE
-+	select SSB_PCICORE_HOSTMODE
-+	select CFE
-+	select GENERIC_GPIO
-+	help
-+	 Support for BCM947xx based boards
-+
- config MIPS_COBALT
- 	bool "Cobalt Server"
- 	select DMA_NONCOHERENT
--- a/arch/mips/kernel/cpu-probe.c
-+++ b/arch/mips/kernel/cpu-probe.c
-@@ -793,6 +793,28 @@
- }
- 
- 
-+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
-+{
-+	decode_config1(c);
-+	switch (c->processor_id & 0xff00) {
-+		case PRID_IMP_BCM3302:
-+			c->cputype = CPU_BCM3302;
-+			c->isa_level = MIPS_CPU_ISA_M32R1;
-+			c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-+					MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER;
-+		break;
-+		case PRID_IMP_BCM4710:
-+			c->cputype = CPU_BCM4710;
-+			c->isa_level = MIPS_CPU_ISA_M32R1;
-+			c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-+					MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER;
-+		break;
-+	default:
-+		c->cputype = CPU_UNKNOWN;
-+		break;
-+	}
-+}
-+
- __init void cpu_probe(void)
- {
- 	struct cpuinfo_mips *c = &current_cpu_data;
-@@ -815,6 +837,9 @@
- 	case PRID_COMP_SIBYTE:
- 		cpu_probe_sibyte(c);
- 		break;
-+	case PRID_COMP_BROADCOM:
-+		cpu_probe_broadcom(c);
-+		break;
- 	case PRID_COMP_SANDCRAFT:
- 		cpu_probe_sandcraft(c);
- 		break;
--- a/arch/mips/kernel/proc.c
-+++ b/arch/mips/kernel/proc.c
-@@ -82,6 +82,8 @@
- 	[CPU_VR4181]	= "NEC VR4181",
- 	[CPU_VR4181A]	= "NEC VR4181A",
- 	[CPU_SR71000]	= "Sandcraft SR71000",
-+	[CPU_BCM3302]	= "Broadcom BCM3302",
-+	[CPU_BCM4710]	= "Broadcom BCM4710",
- 	[CPU_PR4450]	= "Philips PR4450",
- 	[CPU_LOONGSON2]	= "ICT Loongson-2",
- };
--- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -533,6 +533,18 @@
- load-$(CONFIG_SIBYTE_BIGSUR)	:= 0xffffffff80100000
- 
- #
-+# Broadcom BCM47XX boards
-+#
-+core-$(CONFIG_BCM947XX)		+= arch/mips/bcm947xx/
-+cflags-$(CONFIG_BCM947XX)	+= -Iarch/mips/bcm947xx/include -Iinclude/asm-mips/mach-bcm947xx
-+load-$(CONFIG_BCM947XX)		:= 0xffffffff80001000
-+
-+#
-+# Common Firmware Environment
-+#
-+core-$(CONFIG_CFE)		+= arch/mips/cfe/
-+
-+#
- # SNI RM
- #
- core-$(CONFIG_SNI_RM)		+= arch/mips/sni/
--- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -895,6 +895,8 @@
- 	case CPU_AU1550:
- 	case CPU_AU1200:
- 	case CPU_PR4450:
-+	case CPU_BCM3302:
-+	case CPU_BCM4710:
- 		i_nop(p);
- 		tlbw(p);
- 		break;
--- a/drivers/Kconfig
-+++ b/drivers/Kconfig
-@@ -60,6 +60,8 @@
- 
- source "drivers/hwmon/Kconfig"
- 
-+source "drivers/ssb/Kconfig"
-+
- source "drivers/mfd/Kconfig"
- 
- source "drivers/media/Kconfig"
--- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -208,6 +208,12 @@
- #define MACH_GROUP_WINDRIVER   28	/* Windriver boards */
- #define MACH_WRPPMC             1
- 
-+/*
-+ * Valid machtype for group Broadcom
-+ */
-+#define MACH_GROUP_BRCM		23	/* Broadcom			*/
-+#define MACH_BCM47XX		1	/* Broadcom BCM47xx		*/
-+
- #define CL_SIZE			COMMAND_LINE_SIZE
- 
- const char *get_system_type(void);
--- a/include/asm-mips/cpu.h
-+++ b/include/asm-mips/cpu.h
-@@ -106,6 +106,13 @@
- #define PRID_IMP_SR71000        0x0400
- 
- /*
-+ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
-+ */
-+
-+#define PRID_IMP_BCM4710	0x4000
-+#define PRID_IMP_BCM3302	0x9000
-+
-+/*
-  * Definitions for 7:0 on legacy processors
-  */
- 
-@@ -217,8 +224,10 @@
- #define CPU_R14000		64
- #define CPU_LOONGSON1           65
- #define CPU_LOONGSON2           66
-+#define CPU_BCM3302		67
-+#define CPU_BCM4710		68
- 
-#define CPU_LAST		66
-+#define CPU_LAST		68
- 
- /*
-  * ISA Level encodings
--- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -89,3 +89,5 @@
- obj-$(CONFIG_HID)		+= hid/
- obj-$(CONFIG_PPC_PS3)		+= ps3/
- obj-$(CONFIG_OF)		+= of/
-+obj-$(CONFIG_SSB)		+= ssb/
-+
--- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1980,6 +1980,7 @@
- #define PCI_DEVICE_ID_TIGON3_5906M	0x1713
- #define PCI_DEVICE_ID_BCM4401		0x4401
- #define PCI_DEVICE_ID_BCM4401B0		0x4402
-+#define PCI_DEVICE_ID_BCM4713		0x4713
- 
- #define PCI_VENDOR_ID_TOPIC		0x151f
- #define PCI_DEVICE_ID_TOPIC_TP560	0x0000
--- a/target/linux/brcm47xx/patches-2.6.23/110-flash_map.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/110-flash_map.patch
@ -1,25 +0,0 @@
--- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -352,6 +352,12 @@
- 	  Mapping for the Flaga digital module. If you don't have one, ignore
- 	  this setting.
- 
-+config MTD_BCM47XX
-+	tristate "BCM47xx flash device"
-+	depends on MIPS && MTD_CFI && BCM947XX
-+	help
-+	  Support for the flash chips on the BCM947xx board.
-+
- config MTD_WALNUT
- 	tristate "Flash device mapped on IBM 405GP Walnut"
- 	depends on MTD_JEDECPROBE && WALNUT
--- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -33,6 +33,7 @@
- obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
- obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
- obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
-+obj-$(CONFIG_MTD_BCM47XX)	+= bcm47xx-flash.o
- obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
- obj-$(CONFIG_MTD_IPAQ)		+= ipaq-flash.o
- obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
--- a/target/linux/brcm47xx/patches-2.6.23/120-b44_ssb_support.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/120-b44_ssb_support.patch
--- a/target/linux/brcm47xx/patches-2.6.23/121-fix_b44_phyaddr.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/121-fix_b44_phyaddr.patch
@ -1,13 +0,0 @@
--- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -2273,6 +2273,10 @@
- 	       bp->phy_addr = sdev->bus->sprom.et1phyaddr;
- 	       break;
- 	}
-+	/* Some ROMs have buggy PHY addresses with the high
-+	 * bits set (sign extension?). Truncate them to a
-+	 * valid PHY address. */
-+	bp->phy_addr &= 0x1F;
- 
- 	memcpy(bp->dev->dev_addr, addr, 6);
- 
--- a/target/linux/brcm47xx/patches-2.6.23/130-remove_scache.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/130-remove_scache.patch
@ -1,89 +0,0 @@
--- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -192,7 +192,6 @@
- 	select I8259
- 	select MIPS_BOARDS_GEN
- 	select MIPS_BONITO64
-	select MIPS_CPU_SCACHE
- 	select PCI_GT64XXX_PCI0
- 	select MIPS_MSC
- 	select SWAP_IO_SPACE
-@@ -1281,13 +1280,6 @@
- 	bool
- 	select BOARD_SCACHE
- 
-#
-# Support for a MIPS32 / MIPS64 style S-caches
-#
-config MIPS_CPU_SCACHE
-	bool
-	select BOARD_SCACHE
-
- config R5000_CPU_SCACHE
- 	bool
- 	select BOARD_SCACHE
--- a/arch/mips/kernel/cpu-probe.c
-+++ b/arch/mips/kernel/cpu-probe.c
-@@ -701,6 +701,8 @@
- 		break;
- 	case PRID_IMP_25KF:
- 		c->cputype = CPU_25KF;
-+		/* Probe for L2 cache */
-+		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
- 		break;
- 	case PRID_IMP_34K:
- 		c->cputype = CPU_34K;
--- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -1101,7 +1101,6 @@
- 
- extern int r5k_sc_init(void);
- extern int rm7k_sc_init(void);
-extern int mips_sc_init(void);
- 
- static void __init setup_scache(void)
- {
-@@ -1155,29 +1154,17 @@
- #endif
- 
- 	default:
-		if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
-		    c->isa_level == MIPS_CPU_ISA_M32R2 ||
-		    c->isa_level == MIPS_CPU_ISA_M64R1 ||
-		    c->isa_level == MIPS_CPU_ISA_M64R2) {
-#ifdef CONFIG_MIPS_CPU_SCACHE
-			if (mips_sc_init ()) {
-				scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;
-				printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n",
-				       scache_size >> 10,
-				       way_string[c->scache.ways], c->scache.linesz);
-			}
-#else
-			if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
-				panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
-#endif
-			return;
-		}
- 		sc_present = 0;
- 	}
- 
- 	if (!sc_present)
- 		return;
- 
-+	if ((c->isa_level == MIPS_CPU_ISA_M32R1 ||
-+	     c->isa_level == MIPS_CPU_ISA_M64R1) &&
-+	    !(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
-+		panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
-+
- 	/* compute a couple of other cache variables */
- 	c->scache.waysize = scache_size / c->scache.ways;
- 
--- a/arch/mips/mm/Makefile
-+++ b/arch/mips/mm/Makefile
-@@ -31,6 +31,5 @@
- obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
- obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o
- obj-$(CONFIG_RM7000_CPU_SCACHE)	+= sc-rm7k.o
-obj-$(CONFIG_MIPS_CPU_SCACHE)	+= sc-mips.o
- 
- EXTRA_CFLAGS += -Werror
--- a/target/linux/brcm47xx/patches-2.6.23/150-cpu_fixes.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/150-cpu_fixes.patch
@ -1,351 +0,0 @@
--- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -51,6 +51,10 @@
- NESTED(except_vec3_generic, 0, sp)
- 	.set	push
- 	.set	noat
-+#ifdef CONFIG_BCM947XX
-+	nop
-+	nop
-+#endif
- #if R5432_CP0_INTERRUPT_WAR
- 	mfc0	k0, CP0_INDEX
- #endif
--- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -30,6 +30,9 @@
- #include <asm/cacheflush.h> /* for run_uncached() */
- 
- 
-+/* For enabling BCM4710 cache workarounds */
-+int bcm4710 = 0;
-+
- /*
-  * Special Variant of smp_call_function for use by cache functions:
-  *
-@@ -94,6 +97,9 @@
- {
- 	unsigned long  dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page = blast_dcache_page;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_page = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -108,6 +114,9 @@
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_page_indexed = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -122,6 +131,9 @@
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache = blast_dcache;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -638,6 +650,8 @@
- 	unsigned long addr = (unsigned long) arg;
- 
- 	R4600_HIT_CACHEOP_WAR_IMPL;
-+	BCM4710_PROTECTED_FILL_TLB(addr);
-+	BCM4710_PROTECTED_FILL_TLB(addr + 4);
- 	if (dc_lsize)
- 		protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- 	if (!cpu_icache_snoops_remote_store && scache_size)
-@@ -1213,6 +1227,17 @@
- 	 * silly idea of putting something else there ...
- 	 */
- 	switch (current_cpu_data.cputype) {
-+	case CPU_BCM3302:
-+		{
-+			u32 cm;
-+			cm = read_c0_diag();
-+			/* Enable icache */
-+			cm |= (1 << 31);
-+			/* Enable dcache */
-+			cm |= (1 << 30);
-+			write_c0_diag(cm);
-+		}
-+		break;
- 	case CPU_R4000PC:
- 	case CPU_R4000SC:
- 	case CPU_R4000MC:
-@@ -1243,6 +1268,15 @@
- 	/* Default cache error handler for R4000 and R5000 family */
- 	set_uncached_handler (0x100, &except_vec2_generic, 0x80);
- 
-+	/* Check if special workarounds are required */
-+#ifdef CONFIG_BCM947XX
-+	if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & 0xff) == 0) {
-+		printk("Enabling BCM4710A0 cache workarounds.\n");
-+		bcm4710 = 1;
-+	} else
-+#endif
-+		bcm4710 = 0;
-+
- 	probe_pcache();
- 	setup_scache();
- 
-@@ -1288,5 +1322,13 @@
- 	build_clear_page();
- 	build_copy_page();
- 	local_r4k___flush_cache_all(NULL);
-+#ifdef CONFIG_BCM947XX
-+	{
-+		static void (*_coherency_setup)(void);
-+		_coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
-+		_coherency_setup();
-+	}
-+#else
- 	coherency_setup();
-+#endif
- }
--- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -1273,6 +1273,9 @@
- 		/* No need for i_nop */
- 	}
- 
-+#ifdef CONFIG_BCM947XX
-+	i_nop(&p);
-+#endif
- #ifdef CONFIG_64BIT
- 	build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-@@ -1708,6 +1711,9 @@
- 				   struct reloc **r, unsigned int pte,
- 				   unsigned int ptr)
- {
-+#ifdef CONFIG_BCM947XX
-+	i_nop(p);
-+#endif
- #ifdef CONFIG_64BIT
- 	build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
- #else
--- a/include/asm-mips/r4kcache.h
-+++ b/include/asm-mips/r4kcache.h
-@@ -17,6 +17,20 @@
- #include <asm/cpu-features.h>
- #include <asm/mipsmtregs.h>
- 
-+#ifdef CONFIG_BCM947XX
-+#include <asm/paccess.h>
-+#include <linux/ssb/ssb.h>
-+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE + SSB_IMSTATE)))
-+
-+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
-  * This macro return a properly sign-extended address suitable as base address
-  * for indexed cache operations.  Two issues here:
-@@ -150,6 +164,7 @@
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Index_Writeback_Inv_D, addr);
- 	__dflush_epilogue
- }
-@@ -169,6 +184,7 @@
- static inline void flush_dcache_line(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Writeback_Inv_D, addr);
- 	__dflush_epilogue
- }
-@@ -176,6 +192,7 @@
- static inline void invalidate_dcache_line(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Invalidate_D, addr);
- 	__dflush_epilogue
- }
-@@ -208,6 +225,7 @@
-  */
- static inline void protected_flush_icache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	protected_cache_op(Hit_Invalidate_I, addr);
- }
- 
-@@ -219,6 +237,7 @@
-  */
- static inline void protected_writeback_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	protected_cache_op(Hit_Writeback_Inv_D, addr);
- }
- 
-@@ -339,8 +358,52 @@
- 		: "r" (base),						\
- 		  "i" (op));
- 
-+static inline void blast_dcache(void)
-+{
-+	unsigned long start = KSEG0;
-+	unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+	unsigned long end = (start + dcache_size);
-+
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Index_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+
-+	BCM4710_FILL_TLB(start);
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Hit_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+	unsigned long ws_end = current_cpu_data.dcache.ways <<
-+	                       current_cpu_data.dcache.waybit;
-+	unsigned long ws, addr;
-+	for (ws = 0; ws < ws_end; ws += ws_inc) {
-+		start = page + ws;
-+		for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+			BCM4710_DUMMY_RREG();
-+			cache_op(Index_Writeback_Inv_D, addr);
-+		}
-+	}
-+}
-+
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
- static inline void blast_##pfx##cache##lsize(void)			\
- {									\
- 	unsigned long start = INDEX_BASE;				\
-@@ -352,6 +415,7 @@
- 									\
- 	__##pfx##flush_prologue						\
- 									\
-+	war								\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
- 		for (addr = start; addr < end; addr += lsize * 32)	\
- 			cache##lsize##_unroll32(addr|ws,indexop);	\
-@@ -366,6 +430,7 @@
- 									\
- 	__##pfx##flush_prologue						\
- 									\
-+	war								\
- 	do {								\
- 		cache##lsize##_unroll32(start,hitop);			\
- 		start += lsize * 32;					\
-@@ -384,6 +449,8 @@
- 	                       current_cpu_data.desc.waybit;		\
- 	unsigned long ws, addr;						\
- 									\
-+	war								\
-+									\
- 	__##pfx##flush_prologue						\
- 									\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
-@@ -393,28 +460,30 @@
- 	__##pfx##flush_epilogue						\
- }
- 
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
- 
- /* build blast_xxx_range, protected_blast_xxx_range */
-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
- static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
- 	unsigned long addr = start & ~(lsize - 1);			\
- 	unsigned long aend = (end - 1) & ~(lsize - 1);			\
-+	war								\
- 									\
- 	__##pfx##flush_prologue						\
- 									\
- 	while (1) {							\
-+		war2						\
- 		prot##cache_op(hitop, addr);				\
- 		if (addr == aend)					\
- 			break;						\
-@@ -424,13 +493,13 @@
- 	__##pfx##flush_epilogue						\
- }
- 
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
- /* blast_inv_dcache_range */
-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
- 
- #endif /* _ASM_R4KCACHE_H */
--- a/include/asm-mips/stackframe.h
-+++ b/include/asm-mips/stackframe.h
-@@ -350,6 +350,10 @@
- 		.macro	RESTORE_SP_AND_RET
- 		LONG_L	sp, PT_R29(sp)
- 		.set	mips3
-+#ifdef CONFIG_BCM947XX
-+		nop
-+		nop
-+#endif
- 		eret
- 		.set	mips0
- 		.endm
--- a/target/linux/brcm47xx/patches-2.6.23/160-kmap_coherent.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/160-kmap_coherent.patch
@ -1,57 +0,0 @@
--- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -211,7 +211,7 @@
- 	void *vfrom, *vto;
- 
- 	vto = kmap_atomic(to, KM_USER1);
-	if (cpu_has_dc_aliases && !Page_dcache_dirty(from)) {
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent && !Page_dcache_dirty(from)) {
- 		vfrom = kmap_coherent(from, vaddr);
- 		copy_page(vto, vfrom);
- 		kunmap_coherent();
-@@ -234,7 +234,7 @@
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
-	if (cpu_has_dc_aliases) {
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent) {
- 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(vto, src, len);
- 		kunmap_coherent();
-@@ -250,7 +250,7 @@
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
-	if (cpu_has_dc_aliases) {
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent) {
- 		void *vfrom =
- 			kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(dst, vfrom, len);
--- /dev/null
-+++ b/include/asm-mips/mach-bcm947xx/cpu-feature-overrides.h
-@@ -0,0 +1,13 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
-+ */
-+#ifndef __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H
-+
-+#define cpu_use_kmap_coherent	0
-+
-+#endif /* __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H */
--- a/include/asm-mips/cpu-features.h
-+++ b/include/asm-mips/cpu-features.h
-@@ -101,6 +101,9 @@
- #ifndef cpu_has_pindexed_dcache
- #define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
- #endif
-+#ifndef cpu_use_kmap_coherent
-+#define cpu_use_kmap_coherent 1
-+#endif
- 
- /*
-  * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors
--- a/target/linux/brcm47xx/patches-2.6.23/170-cpu_wait.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/170-cpu_wait.patch
@ -1,10 +0,0 @@
--- a/arch/mips/kernel/cpu-probe.c
-+++ b/arch/mips/kernel/cpu-probe.c
-@@ -159,6 +159,7 @@
- 	case CPU_5KC:
- 	case CPU_25KF:
- 	case CPU_PR4450:
-+ 	case CPU_BCM3302:
- 		cpu_wait = r4k_wait;
- 		break;
- 
--- a/target/linux/brcm47xx/patches-2.6.23/220-bcm5354.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/220-bcm5354.patch
@ -1,42 +0,0 @@
--- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -270,6 +270,8 @@
- void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
-                              u32 *plltype, u32 *n, u32 *m)
- {
-+	if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
-+		return;
- 	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
- 	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- 	switch (*plltype) {
-@@ -293,6 +295,8 @@
- void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
- 				 u32 *plltype, u32 *n, u32 *m)
- {
-+	if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
-+		return;
- 	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
- 	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- 	switch (*plltype) {
--- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -161,6 +161,8 @@
- 
- 	if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
- 		rate = 200000000;
-+	} else if (bus->chip_id == 0x5354) {
-+		rate = 240000000;
- 	} else {
- 		rate = ssb_calc_clock_rate(pll_type, n, m);
- 	}
--- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -862,6 +862,8 @@
- 
- 	if (bus->chip_id == 0x5365) {
- 		rate = 100000000;
-+	} else if (bus->chip_id == 0x5354) {
-+		rate = 120000000;
- 	} else {
- 		rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
- 		if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
--- a/target/linux/brcm47xx/patches-2.6.23/230-ohci-ssb.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/230-ohci-ssb.patch
@ -1,339 +0,0 @@
-From: Michael Buesch <mb@bu3sch.de>
-Date: Wed, 10 Oct 2007 06:47:17 +0000 (-0700)
-Subject: USB: ohci SSB bus glue
-X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fralf%2Flinux.git;a=commitdiff_plain;h=c604e851486eabcbeb73e984279d436ce121fd5d
-
-USB: ohci SSB bus glue
-
-This adds SSB bus glue for the USB OHCI HCD.
-
-Signed-off-by: Michael Buesch <mb@bu3sch.de>
-Signed-off-by: John W. Linville <linville@tuxdriver.com>
-Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
-Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
-
--- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -154,6 +154,19 @@
- 	  Enables support for PCI-bus plug-in USB controller cards.
- 	  If unsure, say Y.
- 
-+config USB_OHCI_HCD_SSB
-+	bool "OHCI support for Broadcom SSB OHCI core"
-+	depends on USB_OHCI_HCD && SSB && EXPERIMENTAL
-+	default n
-+	---help---
-+	  Support for the Sonics Silicon Backplane (SSB) attached
-+	  Broadcom USB OHCI core.
-+
-+	  This device is present in some embedded devices with
-+	  Broadcom based SSB bus.
-+
-+	  If unsure, say N.
-+
- config USB_OHCI_BIG_ENDIAN_DESC
- 	bool
- 	depends on USB_OHCI_HCD
--- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -926,11 +926,17 @@
- #define PS3_SYSTEM_BUS_DRIVER	ps3_ohci_driver
- #endif
- 
-+#ifdef CONFIG_USB_OHCI_HCD_SSB
-+#include "ohci-ssb.c"
-+#define SSB_OHCI_DRIVER		ssb_ohci_driver
-+#endif
-+
- #if	!defined(PCI_DRIVER) &&		\
- 	!defined(PLATFORM_DRIVER) &&	\
- 	!defined(OF_PLATFORM_DRIVER) &&	\
- 	!defined(SA1111_DRIVER) &&	\
-	!defined(PS3_SYSTEM_BUS_DRIVER)
-+	!defined(PS3_SYSTEM_BUS_DRIVER) && \
-+	!defined(SSB_OHCI_DRIVER)
- #error "missing bus glue for ohci-hcd"
- #endif
- 
-@@ -975,10 +981,20 @@
- 		goto error_pci;
- #endif
- 
-+#ifdef SSB_OHCI_DRIVER
-+	retval = ssb_driver_register(&SSB_OHCI_DRIVER);
-+	if (retval)
-+		goto error_ssb;
-+#endif
-+
- 	return retval;
- 
- 	/* Error path */
-+#ifdef SSB_OHCI_DRIVER
-+ error_ssb:
-+#endif
- #ifdef PCI_DRIVER
-+	pci_unregister_driver(&PCI_DRIVER);
-  error_pci:
- #endif
- #ifdef SA1111_DRIVER
-@@ -1003,6 +1019,9 @@
- 
- static void __exit ohci_hcd_mod_exit(void)
- {
-+#ifdef SSB_OHCI_DRIVER
-+	ssb_driver_unregister(&SSB_OHCI_DRIVER);
-+#endif
- #ifdef PCI_DRIVER
- 	pci_unregister_driver(&PCI_DRIVER);
- #endif
--- /dev/null
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -0,0 +1,247 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Broadcom USB-core OHCI driver
-+ *
-+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Derived from the USBcore related parts of Broadcom-SB
-+ * Copyright 2005 Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/ssb/ssb.h>
-+
-+
-+#define SSB_OHCI_TMSLOW_HOSTMODE	(1 << 29)
-+
-+struct ssb_ohci_device {
-+	struct ohci_hcd ohci; /* _must_ be at the beginning. */
-+
-+	u32 enable_flags;
-+};
-+
-+static inline
-+struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
-+{
-+	return (struct ssb_ohci_device *)(hcd->hcd_priv);
-+}
-+
-+
-+static int ssb_ohci_reset(struct usb_hcd *hcd)
-+{
-+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-+	struct ohci_hcd *ohci = &ohcidev->ohci;
-+	int err;
-+
-+	ohci_hcd_init(ohci);
-+	err = ohci_init(ohci);
-+
-+	return err;
-+}
-+
-+static int ssb_ohci_start(struct usb_hcd *hcd)
-+{
-+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-+	struct ohci_hcd *ohci = &ohcidev->ohci;
-+	int err;
-+
-+	err = ohci_run(ohci);
-+	if (err < 0) {
-+		ohci_err(ohci, "can't start\n");
-+		ohci_stop(hcd);
-+	}
-+
-+	return err;
-+}
-+
-+#ifdef CONFIG_PM
-+static int ssb_ohci_hcd_suspend(struct usb_hcd *hcd, pm_message_t message)
-+{
-+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-+	struct ohci_hcd *ohci = &ohcidev->ohci;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&ohci->lock, flags);
-+
-+	ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-+	ohci_readl(ohci, &ohci->regs->intrdisable); /* commit write */
-+
-+	/* make sure snapshot being resumed re-enumerates everything */
-+	if (message.event == PM_EVENT_PRETHAW)
-+		ohci_usb_reset(ohci);
-+
-+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-+
-+	spin_unlock_irqrestore(&ohci->lock, flags);
-+	return 0;
-+}
-+
-+static int ssb_ohci_hcd_resume(struct usb_hcd *hcd)
-+{
-+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-+	usb_hcd_resume_root_hub(hcd);
-+	return 0;
-+}
-+#endif /* CONFIG_PM */
-+
-+static const struct hc_driver ssb_ohci_hc_driver = {
-+	.description		= "ssb-usb-ohci",
-+	.product_desc		= "SSB OHCI Controller",
-+	.hcd_priv_size		= sizeof(struct ssb_ohci_device),
-+
-+	.irq			= ohci_irq,
-+	.flags			= HCD_MEMORY | HCD_USB11,
-+
-+	.reset			= ssb_ohci_reset,
-+	.start			= ssb_ohci_start,
-+	.stop			= ohci_stop,
-+	.shutdown		= ohci_shutdown,
-+
-+#ifdef CONFIG_PM
-+	.suspend		= ssb_ohci_hcd_suspend,
-+	.resume			= ssb_ohci_hcd_resume,
-+#endif
-+
-+	.urb_enqueue		= ohci_urb_enqueue,
-+	.urb_dequeue		= ohci_urb_dequeue,
-+	.endpoint_disable	= ohci_endpoint_disable,
-+
-+	.get_frame_number	= ohci_get_frame,
-+
-+	.hub_status_data	= ohci_hub_status_data,
-+	.hub_control		= ohci_hub_control,
-+	.hub_irq_enable		= ohci_rhsc_enable,
-+	.bus_suspend		= ohci_bus_suspend,
-+	.bus_resume		= ohci_bus_resume,
-+
-+	.start_port_reset	= ohci_start_port_reset,
-+};
-+
-+static void ssb_ohci_detach(struct ssb_device *dev)
-+{
-+	struct usb_hcd *hcd = ssb_get_drvdata(dev);
-+
-+	usb_remove_hcd(hcd);
-+	iounmap(hcd->regs);
-+	usb_put_hcd(hcd);
-+	ssb_device_disable(dev, 0);
-+}
-+
-+static int ssb_ohci_attach(struct ssb_device *dev)
-+{
-+	struct ssb_ohci_device *ohcidev;
-+	struct usb_hcd *hcd;
-+	int err = -ENOMEM;
-+	u32 tmp, flags = 0;
-+
-+	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
-+		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-+
-+	ssb_device_enable(dev, flags);
-+
-+	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
-+			dev->dev->bus_id);
-+	if (!hcd)
-+		goto err_dev_disable;
-+	ohcidev = hcd_to_ssb_ohci(hcd);
-+	ohcidev->enable_flags = flags;
-+
-+	tmp = ssb_read32(dev, SSB_ADMATCH0);
-+	hcd->rsrc_start = ssb_admatch_base(tmp);
-+	hcd->rsrc_len = ssb_admatch_size(tmp);
-+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-+	if (!hcd->regs)
-+		goto err_put_hcd;
-+	err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
-+	if (err)
-+		goto err_iounmap;
-+
-+	ssb_set_drvdata(dev, hcd);
-+
-+	return err;
-+
-+err_iounmap:
-+	iounmap(hcd->regs);
-+err_put_hcd:
-+	usb_put_hcd(hcd);
-+err_dev_disable:
-+	ssb_device_disable(dev, flags);
-+	return err;
-+}
-+
-+static int ssb_ohci_probe(struct ssb_device *dev,
-+		const struct ssb_device_id *id)
-+{
-+	int err;
-+	u16 chipid_top;
-+
-+	/* USBcores are only connected on embedded devices. */
-+	chipid_top = (dev->bus->chip_id & 0xFF00);
-+	if (chipid_top != 0x4700 && chipid_top != 0x5300)
-+		return -ENODEV;
-+
-+	/* TODO: Probably need checks here; is the core connected? */
-+
-+	if (usb_disabled())
-+		return -ENODEV;
-+
-+	/* We currently always attach SSB_DEV_USB11_HOSTDEV
-+	 * as HOST OHCI. If we want to attach it as Client device,
-+	 * we must branch here and call into the (yet to
-+	 * be written) Client mode driver. Same for remove(). */
-+
-+	err = ssb_ohci_attach(dev);
-+
-+	return err;
-+}
-+
-+static void ssb_ohci_remove(struct ssb_device *dev)
-+{
-+	ssb_ohci_detach(dev);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
-+{
-+	ssb_device_disable(dev, 0);
-+
-+	return 0;
-+}
-+
-+static int ssb_ohci_resume(struct ssb_device *dev)
-+{
-+	struct usb_hcd *hcd = ssb_get_drvdata(dev);
-+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-+
-+	ssb_device_enable(dev, ohcidev->enable_flags);
-+
-+	return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ssb_ohci_suspend	NULL
-+#define ssb_ohci_resume	NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct ssb_device_id ssb_ohci_table[] = {
-+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
-+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-+	SSB_DEVTABLE_END
-+};
-+MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
-+
-+static struct ssb_driver ssb_ohci_driver = {
-+	.name		= KBUILD_MODNAME,
-+	.id_table	= ssb_ohci_table,
-+	.probe		= ssb_ohci_probe,
-+	.remove		= ssb_ohci_remove,
-+	.suspend	= ssb_ohci_suspend,
-+	.resume		= ssb_ohci_resume,
-+};
--- a/target/linux/brcm47xx/patches-2.6.23/240-ohci-ssb-pm.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/240-ohci-ssb-pm.patch
@ -1,28 +0,0 @@
-From: Al Viro <viro@ftp.linux.org.uk>
-Date: Sat, 13 Oct 2007 21:29:47 +0000 (+0100)
-Subject: Fix ohci-ssb with !CONFIG_PM
-X-Git-Tag: linux-2.6.24-rc1~57^2~38
-X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fralf%2Flinux.git;a=commitdiff_plain;h=4735b37cf434175c2b7b36b3b68f1e60e8ec8527;hp=d773b33972a663cfaf066e966f87922a74088a1e
-
-Fix ohci-ssb with !CONFIG_PM
-
-ohci_bus_{suspend,resume} exists only if we have CONFIG_PM; do the same
-thing as other subdrivers...
-
-Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
-
--- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -117,8 +117,10 @@
- 	.hub_status_data	= ohci_hub_status_data,
- 	.hub_control		= ohci_hub_control,
- 	.hub_irq_enable		= ohci_rhsc_enable,
-+#ifdef	CONFIG_PM
- 	.bus_suspend		= ohci_bus_suspend,
- 	.bus_resume		= ohci_bus_resume,
-+#endif
- 
- 	.start_port_reset	= ohci_start_port_reset,
- };
--- a/target/linux/brcm47xx/patches-2.6.23/250-ohci-ssb-usb2.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/250-ohci-ssb-usb2.patch
@ -1,72 +0,0 @@
--- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -142,10 +142,59 @@
- 	int err = -ENOMEM;
- 	u32 tmp, flags = 0;
- 
-	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
-+	/*
-+	 * THE FOLLOWING COMMENTS PRESERVED FROM GPL SOURCE RELEASE
-+	 *
-+	 * The USB core requires a special bit to be set during core
-+	 * reset to enable host (OHCI) mode. Resetting the SB core in
-+	 * pcibios_enable_device() is a hack for compatibility with
-+	 * vanilla usb-ohci so that it does not have to know about
-+	 * SB. A driver that wants to use the USB core in device mode
-+	 * should know about SB and should reset the bit back to 0
-+	 * after calling pcibios_enable_device().
-+	 */
-+
-+	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
- 		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-+		ssb_device_enable(dev, flags);
-+	}
-+
-+	/*
-+	 * USB 2.0 special considerations:
-+	 *
-+	 * 1. Since the core supports both OHCI and EHCI functions, it must
-+	 *    only be reset once.
-+	 * 
-+	 * 2. In addition to the standard SB reset sequence, the Host Control
-+	 *    Register must be programmed to bring the USB core and various
-+	 *    phy components out of reset. 
-+	 */
-+
-+	else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+#warning FIX ME need test for core being up & exit
-+		ssb_device_enable(dev, 0);
-+		ssb_write32(dev, 0x200, 0x7ff);
-+		udelay(1);
-+		if (dev->id.revision == 1) { // bug in rev 1
-+
-+			/* Change Flush control reg */
-+			tmp = ssb_read32(dev, 0x400);
-+			tmp &= ~8;
-+			ssb_write32(dev, 0x400, tmp);
-+			tmp = ssb_read32(dev, 0x400);
-+			printk("USB20H fcr: 0x%0x\n", tmp);
-+
-+			/* Change Shim control reg */
-+			tmp = ssb_read32(dev, 0x304);
-+			tmp &= ~0x100;
-+			ssb_write32(dev, 0x304, tmp);
-+			tmp = ssb_read32(dev, 0x304);
-+			printk("USB20H shim: 0x%0x\n", tmp);
-+		}
-+	}
-+	else
-+		ssb_device_enable(dev, 0);
- 
-	ssb_device_enable(dev, flags);
- 
- 	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
- 			dev->dev->bus_id);
-@@ -235,6 +284,7 @@
- static const struct ssb_device_id ssb_ohci_table[] = {
- 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
- 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
- 	SSB_DEVTABLE_END
- };
- MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
--- a/target/linux/brcm47xx/patches-2.6.23/260-ohci-set-dma-mask.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/260-ohci-set-dma-mask.patch
@ -1,14 +0,0 @@
--- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -195,6 +195,11 @@
- 	else
- 		ssb_device_enable(dev, 0);
- 
-+ /*
-+  * Set dma mask - 32 bit mask is just an assumption
-+  */
-+ if (ssb_dma_set_mask(dev, DMA_32BIT_MASK))
-+   return -EOPNOTSUPP;
- 
- 	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
- 			dev->dev->bus_id);
--- a/target/linux/brcm47xx/patches-2.6.23/300-fork_cacheflush.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/300-fork_cacheflush.patch
@ -1,11 +0,0 @@
--- a/include/asm-mips/cacheflush.h
-+++ b/include/asm-mips/cacheflush.h
-@@ -32,7 +32,7 @@
- extern void (*flush_cache_all)(void);
- extern void (*__flush_cache_all)(void);
- extern void (*flush_cache_mm)(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm)	do { (void) (mm); } while (0)
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
- extern void (*flush_cache_range)(struct vm_area_struct *vma,
- 	unsigned long start, unsigned long end);
- extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
--- a/target/linux/brcm47xx/patches-2.6.23/310-no_highpage.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/310-no_highpage.patch
@ -1,67 +0,0 @@
--- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -205,31 +205,6 @@
- 	preempt_check_resched();
- }
- 
-void copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *vfrom, *vto;
-
-	vto = kmap_atomic(to, KM_USER1);
-	if (cpu_has_dc_aliases && cpu_use_kmap_coherent && !Page_dcache_dirty(from)) {
-		vfrom = kmap_coherent(from, vaddr);
-		copy_page(vto, vfrom);
-		kunmap_coherent();
-	} else {
-		vfrom = kmap_atomic(from, KM_USER0);
-		copy_page(vto, vfrom);
-		kunmap_atomic(vfrom, KM_USER0);
-	}
-	if (((vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc) ||
-	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-		flush_data_cache_page((unsigned long)vto);
-	kunmap_atomic(vto, KM_USER1);
-	/* Make sure this page is cleared on other CPU's too before using it */
-	smp_wmb();
-}
-
-EXPORT_SYMBOL(copy_user_highpage);
-
- void copy_to_user_page(struct vm_area_struct *vma,
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
--- a/include/asm-mips/page.h
-+++ b/include/asm-mips/page.h
-@@ -35,6 +35,7 @@
- #ifndef __ASSEMBLY__
- 
- #include <linux/pfn.h>
-+#include <asm/cpu-features.h>
- #include <asm/io.h>
- 
- /*
-@@ -67,13 +68,16 @@
- 		flush_data_cache_page((unsigned long)addr);
- }
- 
-extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-	struct page *to);
-struct vm_area_struct;
-extern void copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma);
-+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-+	struct page *to)
-+{
-+	extern void (*flush_data_cache_page)(unsigned long addr);
- 
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-+	copy_page(vto, vfrom);
-+	if (!cpu_has_ic_fills_f_dc ||
-+	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-+		flush_data_cache_page((unsigned long)vto);
-+}
- 
- /*
-  * These are used to make use of C type-checking..
--- a/target/linux/brcm47xx/patches-2.6.23/410-aec62xx_pci_enable.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/410-aec62xx_pci_enable.patch
@ -1,31 +0,0 @@
--- a/drivers/ide/pci/aec62xx.c
-+++ b/drivers/ide/pci/aec62xx.c
-@@ -248,7 +248,14 @@
- 
- static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d)
- {
-	unsigned long dma_base = pci_resource_start(dev, 4);
-+	unsigned long dma_base;
-+	int err;
-+
-+	err = pci_enable_device(dev);
-+	if (err)
-+		return err;
-+
-+	dma_base = pci_resource_start(dev, 4);
- 
- 	if (inb(dma_base + 2) & 0x10) {
- 		d->name = (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) ?
-@@ -256,7 +263,11 @@
- 		d->udma_mask = 0x7f; /* udma0-6 */
- 	}
- 
-	return ide_setup_pci_device(dev, d);
-+	err = ide_setup_pci_device(dev, d);
-+	if(err)
-+		pci_disable_device(dev);
-+
-+	return err;
- }
- 
- static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
--- a/target/linux/brcm47xx/patches-2.6.23/500-lzma_initramfs.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/500-lzma_initramfs.patch
@ -1,117 +0,0 @@
--- a/scripts/gen_initramfs_list.sh
-+++ b/scripts/gen_initramfs_list.sh
-@@ -287,7 +287,7 @@
- 	if [ "${is_cpio_compressed}" = "compressed" ]; then
- 		cat ${cpio_tfile} > ${output_file}
- 	else
-		cat ${cpio_tfile} | gzip -f -9 - > ${output_file}
-+		lzma e -lc1 -lp2 -pb2 ${cpio_tfile} ${output_file}
- 	fi
- 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
- fi
--- a/init/initramfs.c
-+++ b/init/initramfs.c
-@@ -441,6 +441,69 @@
- 	outcnt = 0;
- }
- 
-+#include <linux/LzmaDecode.h>
-+static int __init lzma_unzip(void)
-+{
-+	unsigned int i;  /* temp value */
-+	unsigned int lc; /* literal context bits */
-+	unsigned int lp; /* literal pos state bits */
-+	unsigned int pb; /* pos state bits */
-+	unsigned int osize; /* uncompressed size */
-+	unsigned char *workspace;
-+	unsigned char* outputbuffer;
-+	unsigned int outsizeProcessed = 0;
-+	int workspace_size;
-+	int res;
-+
-+	// lzma args
-+	i = get_byte();
-+	lc = i % 9, i = i / 9;
-+	lp = i % 5, pb = i / 5;
-+
-+	// skip dictionary size
-+	for (i = 0; i < 4; i++)
-+		get_byte();
-+
-+	/* read the lower half of uncompressed size in the header */
-+	osize = ((unsigned int)get_byte()) +
-+		((unsigned int)get_byte() << 8) +
-+		((unsigned int)get_byte() << 16) +
-+		((unsigned int)get_byte() << 24);
-+
-+	/* skip rest of the header (upper half of uncompressed size) */
-+	for (i = 0; i < 4; i++)
-+		get_byte();
-+
-+	workspace_size = ((LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp))) * sizeof(CProb)) + 100;
-+	printk( KERN_NOTICE "initramfs: LZMA lc=%d,lp=%d,pb=%d,origSize=%d\n",
-+	lc,lp,pb,osize);
-+	outputbuffer = kmalloc(osize, GFP_KERNEL);
-+	if (outputbuffer == 0) {
-+		printk(KERN_ERR "initramfs: Couldn't allocate lzma output buffer\n");
-+		return -1;
-+	}
-+
-+	workspace = kmalloc(workspace_size, GFP_KERNEL);
-+	if (workspace == NULL) {
-+		printk(KERN_ERR "initramfs: Couldn't allocate lzma workspace\n");
-+		return -1;
-+	}
-+
-+	res = LzmaDecode(workspace, workspace_size, lc, lp, pb, inbuf + inptr, insize - inptr, outputbuffer, osize, &outsizeProcessed);
-+	if( res != 0 ) {
-+		panic( KERN_ERR "initramfs: Lzma decode failure\n");
-+		return -1;
-+	}
-+
-+	flush_buffer(outputbuffer, outsizeProcessed);
-+	inptr = insize;
-+
-+	kfree(outputbuffer);
-+	kfree(workspace);
-+	state = Reset;
-+	return 0;
-+}
-+
- static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only)
- {
- 	int written;
-@@ -475,12 +538,28 @@
- 		inptr = 0;
- 		outcnt = 0;		/* bytes in output buffer */
- 		bytes_out = 0;
-		crc = (ulg)0xffffffffL; /* shift register contents */
-		makecrc();
-		gunzip();
-		if (state != Reset)
-+		if( inbuf[0] == 037 && ((inbuf[1] == 0213) || (inbuf[1] == 0236)))
-+		{
-+		   printk( KERN_NOTICE "detected gzip initramfs\n");
-+		   crc = (ulg)0xffffffffL; /* shift register contents */
-+		   makecrc();
-+		   gunzip();
-+		   if (state != Reset)
- 			error("junk in gzipped archive");
-		this_header = saved_offset + inptr;
-+		}
-+		else if(!memcmp(inbuf+1, "\x00\x00\x80\x00", 4)) /* FIXME: hardcoded dictionary size */
-+		{
-+		   printk( KERN_NOTICE "detected lzma initramfs\n");
-+		   lzma_unzip();
-+		}
-+		else
-+		{
-+		   // skip forward ?
-+		   crc = (ulg)0xffffffffL; /* shift register contents */
-+		   makecrc();
-+		   gunzip();
-+		}
-+	        this_header = saved_offset + inptr;
- 		buf += inptr;
- 		len -= inptr;
- 	}
--- a/target/linux/brcm47xx/patches-2.6.23/600-ssb-fix-pcidevices.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/600-ssb-fix-pcidevices.patch
@ -1,63 +0,0 @@
--- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -66,6 +66,7 @@
- 			base = &ssb_pcicore_pcibus_iobase;
- 		else
- 			base = &ssb_pcicore_pcibus_membase;
-+		res->flags |= IORESOURCE_PCI_FIXED;
- 		if (res->end) {
- 			size = res->end - res->start + 1;
- 			if (*base & (size - 1))
-@@ -88,10 +89,12 @@
- 
- static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
- {
-+	u8 lat;
-+
- 	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
- 		return;
- 
-	ssb_printk(KERN_INFO "PCI: fixing up bridge\n");
-+	ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
- 
- 	/* Enable PCI bridge bus mastering and memory space */
- 	pci_set_master(dev);
-@@ -101,7 +104,10 @@
- 	pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
- 
- 	/* Make sure our latency is high enough to handle the devices behind us */
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8);
-+	lat = 168;
-+	ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
-+		   pci_name(dev), lat);
-+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
- }
- DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
- 
-@@ -279,14 +285,14 @@
- 	.name	= "SSB PCIcore external memory",
- 	.start	= SSB_PCI_DMA,
- 	.end	= SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1,
-	.flags	= IORESOURCE_MEM,
-+	.flags	= IORESOURCE_MEM | IORESOURCE_PCI_FIXED,
- };
- 
- static struct resource ssb_pcicore_io_resource = {
- 	.name	= "SSB PCIcore external I/O",
- 	.start	= 0x100,
- 	.end	= 0x7FF,
-	.flags	= IORESOURCE_IO,
-+	.flags	= IORESOURCE_IO | IORESOURCE_PCI_FIXED,
- };
- 
- static struct pci_controller ssb_pcicore_controller = {
-@@ -344,7 +350,8 @@
- 	/* Ok, ready to run, register it to the system.
- 	 * The following needs change, if we want to port hostmode
- 	 * to non-MIPS platform. */
-	set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000));
-+	ssb_pcicore_controller.io_map_base = (unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000);
-+	set_io_port_base(ssb_pcicore_controller.io_map_base);
- 	/* Give some time to the PCI controller to configure itself with the new
- 	 * values. Not waiting at this point causes crashes of the machine. */
- 	mdelay(10);
--- a/target/linux/brcm47xx/patches-2.6.23/601-mips-remove-pci-collision-check.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/601-mips-remove-pci-collision-check.patch
@ -1,19 +0,0 @@
-The SSB pcicore driver does create some MMIO resource collisions.
-However, the pcicore PCI-fixup routine fixes these collisions afterwards.
-Remove this sanity check for now until we find a better solution.
--mb
--- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -177,10 +177,8 @@
- 			continue;
- 
- 		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-+		if (!r->start && r->end)
-+			printk(KERN_WARNING "PCI: Device %s resource collisions detected. Ignoring...\n", pci_name(dev));
- 		if (r->flags & IORESOURCE_IO)
- 			cmd |= PCI_COMMAND_IO;
- 		if (r->flags & IORESOURCE_MEM)
--- a/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch
@ -1,86 +0,0 @@
--- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -403,6 +403,7 @@
- 	unsigned int irq;
- 	u32 baud_base, div;
- 	u32 i, n;
-+	unsigned int ccrev = cc->dev->id.revision;
- 
- 	plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- 	irq = ssb_mips_irq(cc->dev);
-@@ -414,14 +415,39 @@
- 						chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
- 		div = 1;
- 	} else {
-		if (cc->dev->id.revision >= 11) {
-+		if (ccrev == 20) {
-+			/* BCM5354 uses constant 25MHz clock */
-+			baud_base = 25000000;
-+			div = 48;
-+			/* Set the override bit so we don't divide it */
-+			chipco_write32(cc, SSB_CHIPCO_CORECTL,
-+				       chipco_read32(cc, SSB_CHIPCO_CORECTL)
-+				       | SSB_CHIPCO_CORECTL_UARTCLK0);
-+		} else if ((ccrev >= 11) && (ccrev != 15)) {
- 			/* Fixed ALP clock */
- 			baud_base = 20000000;
-+			if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
-+				/* FIXME: baud_base is different for devices with a PMU */
-+				SSB_WARN_ON(1);
-+			}
- 			div = 1;
-+			if (ccrev >= 21) {
-+				/* Turn off UART clock before switching clocksource. */
-+				chipco_write32(cc, SSB_CHIPCO_CORECTL,
-+					       chipco_read32(cc, SSB_CHIPCO_CORECTL)
-+					       & ~SSB_CHIPCO_CORECTL_UARTCLKEN);
-+			}
- 			/* Set the override bit so we don't divide it */
- 			chipco_write32(cc, SSB_CHIPCO_CORECTL,
-				       SSB_CHIPCO_CORECTL_UARTCLK0);
-		} else if (cc->dev->id.revision >= 3) {
-+				       chipco_read32(cc, SSB_CHIPCO_CORECTL)
-+				       | SSB_CHIPCO_CORECTL_UARTCLK0);
-+			if (ccrev >= 21) {
-+				/* Re-enable the UART clock. */
-+				chipco_write32(cc, SSB_CHIPCO_CORECTL,
-+					       chipco_read32(cc, SSB_CHIPCO_CORECTL)
-+					       | SSB_CHIPCO_CORECTL_UARTCLKEN);
-+			}
-+		} else if (ccrev >= 3) {
- 			/* Internal backplane clock */
- 			baud_base = ssb_clockspeed(bus);
- 			div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
-@@ -433,7 +459,7 @@
- 		}
- 
- 		/* Clock source depends on strapping if UartClkOverride is unset */
-		if ((cc->dev->id.revision > 0) &&
-+		if ((ccrev > 0) &&
- 		    !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
- 			if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
- 			    SSB_CHIPCO_CAP_UARTCLK_INT) {
-@@ -455,7 +481,7 @@
- 		cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
- 		uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
- 		/* Offset changed at after rev 0 */
-		if (cc->dev->id.revision == 0)
-+		if (ccrev == 0)
- 			uart_regs += (i * 8);
- 		else
- 			uart_regs += (i * 256);
--- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -51,9 +51,12 @@
- #define  SSB_CHIPCO_CAP_JTAGM		0x00400000	/* JTAG master present */
- #define  SSB_CHIPCO_CAP_BROM		0x00800000	/* Internal boot ROM active */
- #define  SSB_CHIPCO_CAP_64BIT		0x08000000	/* 64-bit Backplane */
-+#define  SSB_CHIPCO_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
-+#define  SSB_CHIPCO_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
- #define SSB_CHIPCO_CORECTL		0x0008
- #define  SSB_CHIPCO_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
- #define	 SSB_CHIPCO_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
-+#define  SSB_CHIPCO_CORECTL_UARTCLKEN	0x00000008	/* UART clock enable (rev >= 21) */
- #define SSB_CHIPCO_BIST			0x000C
- #define SSB_CHIPCO_OTPS			0x0010		/* OTP status */
- #define	 SSB_CHIPCO_OTPS_PROGFAIL	0x80000000
--- a/target/linux/brcm47xx/patches-2.6.23/610-ssb-watchdog-fix.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/610-ssb-watchdog-fix.patch
@ -1,119 +0,0 @@
--- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -105,6 +105,12 @@
- 
- 	  If unsure, say N
- 
-+# Assumption: We are on embedded, if we compile the MIPS core.
-+config SSB_EMBEDDED
-+	bool
-+	depends on SSB_DRIVER_MIPS
-+	default y
-+
- config SSB_DRIVER_EXTIF
- 	bool "SSB Broadcom EXTIF core driver (EXPERIMENTAL)"
- 	depends on SSB_DRIVER_MIPS && EXPERIMENTAL
--- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -1,5 +1,6 @@
- # core
- ssb-y					+= main.o scan.o
-+ssb-$(CONFIG_SSB_EMBEDDED)		+= embedded.o
- 
- # host support
- ssb-$(CONFIG_SSB_PCIHOST)		+= pci.o pcihost_wrapper.o
--- a/drivers/ssb/driver_extif.c
-+++ b/drivers/ssb/driver_extif.c
-@@ -37,6 +37,12 @@
- 	return value;
- }
- 
-+void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
-+				  u32 ticks)
-+{
-+	extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks);
-+}
-+
- #ifdef CONFIG_SSB_SERIAL
- static bool serial_exists(u8 *regs)
- {
--- /dev/null
-+++ b/drivers/ssb/embedded.c
-@@ -0,0 +1,26 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Embedded systems support code
-+ *
-+ * Copyright 2005-2008, Broadcom Corporation
-+ * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/ssb/ssb_embedded.h>
-+
-+
-+int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks)
-+{
-+	if (ssb_chipco_available(&bus->chipco)) {
-+		ssb_chipco_watchdog_timer_set(&bus->chipco, ticks);
-+		return 0;
-+	}
-+	if (ssb_extif_available(&bus->extif)) {
-+		ssb_extif_watchdog_timer_set(&bus->extif, ticks);
-+		return 0;
-+	}
-+	return -ENODEV;
-+}
--- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -360,6 +360,11 @@
- 	u16 fast_pwrup_delay;
- };
- 
-+static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-+{
-+	return (cc->dev != NULL);
-+}
-+
- extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
- 
- #include <linux/pm.h>
--- a/include/linux/ssb/ssb_driver_extif.h
-+++ b/include/linux/ssb/ssb_driver_extif.h
-@@ -178,6 +178,9 @@
- u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value);
- u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value);
- 
-+extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
-+					 u32 ticks);
-+
- #ifdef CONFIG_SSB_SERIAL
- extern int ssb_extif_serial_init(struct ssb_extif *extif,
- 				 struct ssb_serial_port *ports);
-@@ -201,5 +204,11 @@
- {
- }
- 
-+static inline
-+void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
-+				  u32 ticks)
-+{
-+}
-+
- #endif /* CONFIG_SSB_DRIVER_EXTIF */
- #endif /* LINUX_SSB_EXTIFCORE_H_ */
--- /dev/null
-+++ b/include/linux/ssb/ssb_embedded.h
-@@ -0,0 +1,10 @@
-+#ifndef LINUX_SSB_EMBEDDED_H_
-+#define LINUX_SSB_EMBEDDED_H_
-+
-+#include <linux/types.h>
-+#include <linux/ssb/ssb.h>
-+
-+
-+extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
-+
-+#endif /* LINUX_SSB_EMBEDDED_H_ */
--- a/target/linux/brcm47xx/patches-2.6.23/620-ssb-modinit-fix.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/620-ssb-modinit-fix.patch
@ -1,13 +0,0 @@
--- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -1163,7 +1163,9 @@
- /* ssb must be initialized after PCI but before the ssb drivers.
-  * That means we must use some initcall between subsys_initcall
-  * and device_initcall. */
-fs_initcall(ssb_modinit);
-+//FIXME on embedded we need to be early to make sure we can register
-+//      a new PCI bus, if needed.
-+subsys_initcall(ssb_modinit);
- 
- static void __exit ssb_modexit(void)
- {
--- a/target/linux/brcm47xx/patches-2.6.23/621-ssb-common-gpio-api.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/621-ssb-common-gpio-api.patch
@ -1,233 +0,0 @@
--- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -361,37 +361,31 @@
- {
- 	return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
- }
-EXPORT_SYMBOL(ssb_chipco_gpio_in);
- 
- u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
- 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
- }
-EXPORT_SYMBOL(ssb_chipco_gpio_out);
- 
- u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
- 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
- }
-EXPORT_SYMBOL(ssb_chipco_gpio_outen);
- 
- u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
- 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
- }
-EXPORT_SYMBOL(ssb_chipco_gpio_control);
- 
- u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
- 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
- }
-EXPORT_SYMBOL(ssb_chipco_gpio_intmask);
- 
- u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
- 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
- }
-EXPORT_SYMBOL(ssb_chipco_gpio_polarity);
- 
- #ifdef CONFIG_SSB_SERIAL
- int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
--- a/drivers/ssb/driver_extif.c
-+++ b/drivers/ssb/driver_extif.c
-@@ -122,30 +122,25 @@
- {
- 	return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
- }
-EXPORT_SYMBOL(ssb_extif_gpio_in);
- 
- u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
- {
- 	return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
- 				   mask, value);
- }
-EXPORT_SYMBOL(ssb_extif_gpio_out);
- 
- u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
- {
- 	return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
- 				   mask, value);
- }
-EXPORT_SYMBOL(ssb_extif_gpio_outen);
- 
- u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value)
- {
- 	return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
- }
-EXPORT_SYMBOL(ssb_extif_gpio_polarity);
- 
- u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value)
- {
- 	return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
- }
-EXPORT_SYMBOL(ssb_extif_gpio_intmask);
--- a/drivers/ssb/embedded.c
-+++ b/drivers/ssb/embedded.c
-@@ -11,6 +11,8 @@
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
- 
-+#include "ssb_private.h"
-+
- 
- int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks)
- {
-@@ -24,3 +26,107 @@
- 	}
- 	return -ENODEV;
- }
-+
-+u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask)
-+{
-+	unsigned long flags;
-+	u32 res = 0;
-+
-+	spin_lock_irqsave(&bus->gpio_lock, flags);
-+	if (ssb_chipco_available(&bus->chipco))
-+		res = ssb_chipco_gpio_in(&bus->chipco, mask);
-+	else if (ssb_extif_available(&bus->extif))
-+		res = ssb_extif_gpio_in(&bus->extif, mask);
-+	else
-+		SSB_WARN_ON(1);
-+	spin_unlock_irqrestore(&bus->gpio_lock, flags);
-+
-+	return res;
-+}
-+EXPORT_SYMBOL(ssb_gpio_in);
-+
-+u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value)
-+{
-+	unsigned long flags;
-+	u32 res = 0;
-+
-+	spin_lock_irqsave(&bus->gpio_lock, flags);
-+	if (ssb_chipco_available(&bus->chipco))
-+		res = ssb_chipco_gpio_out(&bus->chipco, mask, value);
-+	else if (ssb_extif_available(&bus->extif))
-+		res = ssb_extif_gpio_out(&bus->extif, mask, value);
-+	else
-+		SSB_WARN_ON(1);
-+	spin_unlock_irqrestore(&bus->gpio_lock, flags);
-+
-+	return res;
-+}
-+EXPORT_SYMBOL(ssb_gpio_out);
-+
-+u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value)
-+{
-+	unsigned long flags;
-+	u32 res = 0;
-+
-+	spin_lock_irqsave(&bus->gpio_lock, flags);
-+	if (ssb_chipco_available(&bus->chipco))
-+		res = ssb_chipco_gpio_outen(&bus->chipco, mask, value);
-+	else if (ssb_extif_available(&bus->extif))
-+		res = ssb_extif_gpio_outen(&bus->extif, mask, value);
-+	else
-+		SSB_WARN_ON(1);
-+	spin_unlock_irqrestore(&bus->gpio_lock, flags);
-+
-+	return res;
-+}
-+EXPORT_SYMBOL(ssb_gpio_outen);
-+
-+u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value)
-+{
-+	unsigned long flags;
-+	u32 res = 0;
-+
-+	spin_lock_irqsave(&bus->gpio_lock, flags);
-+	if (ssb_chipco_available(&bus->chipco))
-+		res = ssb_chipco_gpio_control(&bus->chipco, mask, value);
-+	spin_unlock_irqrestore(&bus->gpio_lock, flags);
-+
-+	return res;
-+}
-+EXPORT_SYMBOL(ssb_gpio_control);
-+
-+u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value)
-+{
-+	unsigned long flags;
-+	u32 res = 0;
-+
-+	spin_lock_irqsave(&bus->gpio_lock, flags);
-+	if (ssb_chipco_available(&bus->chipco))
-+		res = ssb_chipco_gpio_intmask(&bus->chipco, mask, value);
-+	else if (ssb_extif_available(&bus->extif))
-+		res = ssb_extif_gpio_intmask(&bus->extif, mask, value);
-+	else
-+		SSB_WARN_ON(1);
-+	spin_unlock_irqrestore(&bus->gpio_lock, flags);
-+
-+	return res;
-+}
-+EXPORT_SYMBOL(ssb_gpio_intmask);
-+
-+u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value)
-+{
-+	unsigned long flags;
-+	u32 res = 0;
-+
-+	spin_lock_irqsave(&bus->gpio_lock, flags);
-+	if (ssb_chipco_available(&bus->chipco))
-+		res = ssb_chipco_gpio_polarity(&bus->chipco, mask, value);
-+	else if (ssb_extif_available(&bus->extif))
-+		res = ssb_extif_gpio_polarity(&bus->extif, mask, value);
-+	else
-+		SSB_WARN_ON(1);
-+	spin_unlock_irqrestore(&bus->gpio_lock, flags);
-+
-+	return res;
-+}
-+EXPORT_SYMBOL(ssb_gpio_polarity);
--- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -283,6 +283,11 @@
- 	/* Contents of the SPROM. */
- 	struct ssb_sprom sprom;
- 
-+#ifdef CONFIG_SSB_EMBEDDED
-+	/* Lock for GPIO register access. */
-+	spinlock_t gpio_lock;
-+#endif /* EMBEDDED */
-+
- 	/* Internal-only stuff follows. Do not touch. */
- 	struct list_head list;
- #ifdef CONFIG_SSB_DEBUG
--- a/include/linux/ssb/ssb_embedded.h
-+++ b/include/linux/ssb/ssb_embedded.h
-@@ -7,4 +7,12 @@
- 
- extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
- 
-+/* Generic GPIO API */
-+u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask);
-+u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value);
-+u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value);
-+u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value);
-+u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value);
-+u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value);
-+
- #endif /* LINUX_SSB_EMBEDDED_H_ */
--- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -571,6 +571,9 @@
- 
- 	spin_lock_init(&bus->bar_lock);
- 	INIT_LIST_HEAD(&bus->list);
-+#ifdef CONFIG_SSB_EMBEDDED
-+	spin_lock_init(&bus->gpio_lock);
-+#endif
- 
- 	/* Powerup the bus */
- 	err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
--- a/target/linux/brcm47xx/patches-2.6.23/622-ssb-cardbus-fixes.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/622-ssb-cardbus-fixes.patch
@ -1,108 +0,0 @@
--- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -11,6 +11,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/pci.h>
- #include <linux/delay.h>
-+#include <linux/ssb/ssb_embedded.h>
- 
- #include "ssb_private.h"
- 
-@@ -27,6 +28,18 @@
- 	ssb_write32(pc->dev, offset, value);
- }
- 
-+static inline
-+u16 pcicore_read16(struct ssb_pcicore *pc, u16 offset)
-+{
-+	return ssb_read16(pc->dev, offset);
-+}
-+
-+static inline
-+void pcicore_write16(struct ssb_pcicore *pc, u16 offset, u16 value)
-+{
-+	ssb_write16(pc->dev, offset, value);
-+}
-+
- /**************************************************
-  * Code for hostmode operation.
-  **************************************************/
-@@ -123,8 +136,10 @@
- 	u32 addr = 0;
- 	u32 tmp;
- 
-	if (unlikely(pc->cardbusmode && dev > 1))
-+	/* We do only have one cardbus device behind the bridge. */
-+	if (pc->cardbusmode && (dev >= 1))
- 		goto out;
-+
- 	if (bus == 0) {
- 		/* Type 0 transaction */
- 		if (unlikely(dev >= SSB_PCI_SLOT_MAX))
-@@ -324,7 +339,16 @@
- 	pcicore_write32(pc, SSB_PCICORE_ARBCTL, val);
- 	udelay(1); /* Assertion time demanded by the PCI standard */
- 
-	/*TODO cardbus mode */
-+	if (pc->dev->bus->has_cardbus_slot) {
-+		ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
-+		pc->cardbusmode = 1;
-+		/* GPIO 1 resets the bridge */
-+		ssb_gpio_out(pc->dev->bus, 1, 1);
-+		ssb_gpio_outen(pc->dev->bus, 1, 1);
-+		pcicore_write16(pc, SSB_PCICORE_SPROM(0),
-+				pcicore_read16(pc, SSB_PCICORE_SPROM(0))
-+				| 0x0400);
-+	}
- 
- 	/* 64MB I/O window */
- 	pcicore_write32(pc, SSB_PCICORE_SBTOPCI0,
--- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -559,6 +559,7 @@
- 		goto out;
- 	memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
- 	memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
-+	bus->has_cardbus_slot = iv.has_cardbus_slot;
- out:
- 	return err;
- }
--- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -282,6 +282,8 @@
- 	struct ssb_boardinfo boardinfo;
- 	/* Contents of the SPROM. */
- 	struct ssb_sprom sprom;
-+	/* If the board has a cardbus slot, this is set to true. */
-+	bool has_cardbus_slot;
- 
- #ifdef CONFIG_SSB_EMBEDDED
- 	/* Lock for GPIO register access. */
-@@ -299,8 +301,13 @@
- 
- /* The initialization-invariants. */
- struct ssb_init_invariants {
-+	/* Versioning information about the PCB. */
- 	struct ssb_boardinfo boardinfo;
-+	/* The SPROM information. That's either stored in an
-+	 * EEPROM or NVRAM on the board. */
- 	struct ssb_sprom sprom;
-+	/* If the board has a cardbus slot, this is set to true. */
-+	bool has_cardbus_slot;
- };
- /* Type of function to fetch the invariants. */
- typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus,
--- a/include/linux/ssb/ssb_driver_pci.h
-+++ b/include/linux/ssb/ssb_driver_pci.h
-@@ -51,6 +51,11 @@
- #define  SSB_PCICORE_SBTOPCI1_MASK	0xFC000000
- #define SSB_PCICORE_SBTOPCI2		0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
- #define  SSB_PCICORE_SBTOPCI2_MASK	0xC0000000
-+#define SSB_PCICORE_PCICFG0		0x0400	/* PCI config space 0 (rev >= 8) */
-+#define SSB_PCICORE_PCICFG1		0x0500	/* PCI config space 1 (rev >= 8) */
-+#define SSB_PCICORE_PCICFG2		0x0600	/* PCI config space 2 (rev >= 8) */
-+#define SSB_PCICORE_PCICFG3		0x0700	/* PCI config space 3 (rev >= 8) */
-+#define SSB_PCICORE_SPROM(wordoffset)	(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
- 
- /* SBtoPCIx */
- #define SSB_PCICORE_SBTOPCI_MEM		0x00000000
--- a/target/linux/brcm47xx/patches-2.6.23/680-ssb-support-8bit-writes.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/680-ssb-support-8bit-writes.patch
@ -1,189 +0,0 @@
-Add support for 8bit reads/writes to SSB.
--- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -507,6 +507,14 @@
- 	return err;
- }
- 
-+static u8 ssb_ssb_read8(struct ssb_device *dev, u16 offset)
-+{
-+	struct ssb_bus *bus = dev->bus;
-+
-+	offset += dev->core_index * SSB_CORE_SIZE;
-+	return readb(bus->mmio + offset);
-+}
-+
- static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
- {
- 	struct ssb_bus *bus = dev->bus;
-@@ -523,6 +531,14 @@
- 	return readl(bus->mmio + offset);
- }
- 
-+static void ssb_ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
-+{
-+	struct ssb_bus *bus = dev->bus;
-+
-+	offset += dev->core_index * SSB_CORE_SIZE;
-+	writeb(value, bus->mmio + offset);
-+}
-+
- static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
- {
- 	struct ssb_bus *bus = dev->bus;
-@@ -541,8 +557,10 @@
- 
- /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
- static const struct ssb_bus_ops ssb_ssb_ops = {
-+	.read8		= ssb_ssb_read8,
- 	.read16		= ssb_ssb_read16,
- 	.read32		= ssb_ssb_read32,
-+	.write8		= ssb_ssb_write8,
- 	.write16	= ssb_ssb_write16,
- 	.write32	= ssb_ssb_write32,
- };
--- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -572,6 +572,19 @@
- }
- #endif /* DEBUG */
- 
-+static u8 ssb_pci_read8(struct ssb_device *dev, u16 offset)
-+{
-+	struct ssb_bus *bus = dev->bus;
-+
-+	if (unlikely(ssb_pci_assert_buspower(bus)))
-+		return 0xFF;
-+	if (unlikely(bus->mapped_device != dev)) {
-+		if (unlikely(ssb_pci_switch_core(bus, dev)))
-+			return 0xFF;
-+	}
-+	return ioread8(bus->mmio + offset);
-+}
-+
- static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset)
- {
- 	struct ssb_bus *bus = dev->bus;
-@@ -598,6 +611,19 @@
- 	return ioread32(bus->mmio + offset);
- }
- 
-+static void ssb_pci_write8(struct ssb_device *dev, u16 offset, u8 value)
-+{
-+	struct ssb_bus *bus = dev->bus;
-+
-+	if (unlikely(ssb_pci_assert_buspower(bus)))
-+		return;
-+	if (unlikely(bus->mapped_device != dev)) {
-+		if (unlikely(ssb_pci_switch_core(bus, dev)))
-+			return;
-+	}
-+	iowrite8(value, bus->mmio + offset);
-+}
-+
- static void ssb_pci_write16(struct ssb_device *dev, u16 offset, u16 value)
- {
- 	struct ssb_bus *bus = dev->bus;
-@@ -626,8 +652,10 @@
- 
- /* Not "static", as it's used in main.c */
- const struct ssb_bus_ops ssb_pci_ops = {
-+	.read8		= ssb_pci_read8,
- 	.read16		= ssb_pci_read16,
- 	.read32		= ssb_pci_read32,
-+	.write8		= ssb_pci_write8,
- 	.write16	= ssb_pci_write16,
- 	.write32	= ssb_pci_write32,
- };
--- a/drivers/ssb/pcmcia.c
-+++ b/drivers/ssb/pcmcia.c
-@@ -172,6 +172,22 @@
- 	return 0;
- }
- 
-+static u8 ssb_pcmcia_read8(struct ssb_device *dev, u16 offset)
-+{
-+	struct ssb_bus *bus = dev->bus;
-+	unsigned long flags;
-+	int err;
-+	u8 value = 0xFF;
-+
-+	spin_lock_irqsave(&bus->bar_lock, flags);
-+	err = select_core_and_segment(dev, &offset);
-+	if (likely(!err))
-+		value = readb(bus->mmio + offset);
-+	spin_unlock_irqrestore(&bus->bar_lock, flags);
-+
-+	return value;
-+}
-+
- static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset)
- {
- 	struct ssb_bus *bus = dev->bus;
-@@ -206,6 +222,20 @@
- 	return (lo | (hi << 16));
- }
- 
-+static void ssb_pcmcia_write8(struct ssb_device *dev, u16 offset, u8 value)
-+{
-+	struct ssb_bus *bus = dev->bus;
-+	unsigned long flags;
-+	int err;
-+
-+	spin_lock_irqsave(&bus->bar_lock, flags);
-+	err = select_core_and_segment(dev, &offset);
-+	if (likely(!err))
-+		writeb(value, bus->mmio + offset);
-+	mmiowb();
-+	spin_unlock_irqrestore(&bus->bar_lock, flags);
-+}
-+
- static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value)
- {
- 	struct ssb_bus *bus = dev->bus;
-@@ -238,8 +268,10 @@
- 
- /* Not "static", as it's used in main.c */
- const struct ssb_bus_ops ssb_pcmcia_ops = {
-+	.read8		= ssb_pcmcia_read8,
- 	.read16		= ssb_pcmcia_read16,
- 	.read32		= ssb_pcmcia_read32,
-+	.write8		= ssb_pcmcia_write8,
- 	.write16	= ssb_pcmcia_write16,
- 	.write32	= ssb_pcmcia_write32,
- };
--- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -72,8 +72,10 @@
- /* Lowlevel read/write operations on the device MMIO.
-  * Internal, don't use that outside of ssb. */
- struct ssb_bus_ops {
-+	u8 (*read8)(struct ssb_device *dev, u16 offset);
- 	u16 (*read16)(struct ssb_device *dev, u16 offset);
- 	u32 (*read32)(struct ssb_device *dev, u16 offset);
-+	void (*write8)(struct ssb_device *dev, u16 offset, u8 value);
- 	void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
- 	void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
- };
-@@ -344,6 +346,10 @@
- 
- 
- /* Device MMIO register read/write functions. */
-+static inline u8 ssb_read8(struct ssb_device *dev, u16 offset)
-+{
-+	return dev->ops->read8(dev, offset);
-+}
- static inline u16 ssb_read16(struct ssb_device *dev, u16 offset)
- {
- 	return dev->ops->read16(dev, offset);
-@@ -352,6 +358,10 @@
- {
- 	return dev->ops->read32(dev, offset);
- }
-+static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
-+{
-+	dev->ops->write8(dev, offset, value);
-+}
- static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
- {
- 	dev->ops->write16(dev, offset, value);
--- a/target/linux/brcm47xx/patches-2.6.23/690-mips-allow-pciregister-after-boot.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/690-mips-allow-pciregister-after-boot.patch
@ -1,159 +0,0 @@
-Allow registering PCI devices after early boot.
-
-This is an ugly hack and needs to be rewritten before going upstream.
--- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -21,6 +21,17 @@
-  */
- int pci_probe_only;
- 
-+/*
-+ * Indicate whether PCI-bios init was already done.
-+ */
-+static int pcibios_init_done;
-+
-+/*
-+ * The currently used busnumber.
-+ */
-+static int next_busno;
-+static int need_domain_info;
-+
- #define PCI_ASSIGN_ALL_BUSSES	1
- 
- unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
-@@ -75,8 +86,32 @@
- 	res->start = start;
- }
- 
-void __devinit register_pci_controller(struct pci_controller *hose)
-+/* Most MIPS systems have straight-forward swizzling needs.  */
-+
-+static inline u8 bridge_swizzle(u8 pin, u8 slot)
-+{
-+	return (((pin - 1) + slot) % 4) + 1;
-+}
-+
-+static u8 common_swizzle(struct pci_dev *dev, u8 *pinp)
- {
-+	u8 pin = *pinp;
-+
-+	while (dev->bus->parent) {
-+		pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-+		/* Move up the chain of bridges. */
-+		dev = dev->bus->self;
-+        }
-+	*pinp = pin;
-+
-+	/* The slot is the slot of the last bridge. */
-+	return PCI_SLOT(dev->devfn);
-+}
-+
-+void register_pci_controller(struct pci_controller *hose)
-+{
-+	struct pci_bus *bus;
-+
- 	if (request_resource(&iomem_resource, hose->mem_resource) < 0)
- 		goto out;
- 	if (request_resource(&ioport_resource, hose->io_resource) < 0) {
-@@ -84,9 +119,6 @@
- 		goto out;
- 	}
- 
-	*hose_tail = hose;
-	hose_tail = &hose->next;
-
- 	/*
- 	 * Do not panic here but later - this might hapen before console init.
- 	 */
-@@ -94,41 +126,47 @@
- 		printk(KERN_WARNING
- 		       "registering PCI controller with io_map_base unset\n");
- 	}
-	return;
- 
-out:
-	printk(KERN_WARNING
-	       "Skipping PCI bus scan due to resource conflict\n");
-}
-+	if (pcibios_init_done) {
-+		//TODO
- 
-/* Most MIPS systems have straight-forward swizzling needs.  */
-+		printk(KERN_INFO "Registering a PCI bus after boot\n");
- 
-static inline u8 bridge_swizzle(u8 pin, u8 slot)
-{
-	return (((pin - 1) + slot) % 4) + 1;
-}
-+		if (!hose->iommu)
-+			PCI_DMA_BUS_IS_PHYS = 1;
- 
-static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	u8 pin = *pinp;
-+		bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
-+		hose->bus = bus;
-+		need_domain_info = need_domain_info || hose->index;
-+		hose->need_domain_info = need_domain_info;
-+		if (bus) {
-+			next_busno = bus->subordinate + 1;
-+			/* Don't allow 8-bit bus number overflow inside the hose -
-+			   reserve some space for bridges. */
-+			if (next_busno > 224) {
-+				next_busno = 0;
-+				need_domain_info = 1;
-+			}
-+		}
-+		if (!pci_probe_only)
-+			pci_assign_unassigned_resources();
-+		pci_fixup_irqs(common_swizzle, pcibios_map_irq);
-+	} else {
-+		*hose_tail = hose;
-+		hose_tail = &hose->next;
-+	}
- 
-	while (dev->bus->parent) {
-		pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-		/* Move up the chain of bridges. */
-		dev = dev->bus->self;
-        }
-	*pinp = pin;
-+	return;
- 
-	/* The slot is the slot of the last bridge. */
-	return PCI_SLOT(dev->devfn);
-+out:
-+	printk(KERN_WARNING
-+	       "Skipping PCI bus scan due to resource conflict\n");
- }
- 
- static int __init pcibios_init(void)
- {
- 	struct pci_controller *hose;
- 	struct pci_bus *bus;
-	int next_busno;
-	int need_domain_info = 0;
- 
- 	/* Scan all of the recorded PCI controllers.  */
- 	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
-@@ -157,6 +195,7 @@
- 	if (!pci_probe_only)
- 		pci_assign_unassigned_resources();
- 	pci_fixup_irqs(common_swizzle, pcibios_map_irq);
-+	pcibios_init_done = 1;
- 
- 	return 0;
- }
--- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -1185,9 +1185,7 @@
- /* ssb must be initialized after PCI but before the ssb drivers.
-  * That means we must use some initcall between subsys_initcall
-  * and device_initcall. */
-//FIXME on embedded we need to be early to make sure we can register
-//      a new PCI bus, if needed.
-subsys_initcall(ssb_modinit);
-+fs_initcall(ssb_modinit);
- 
- static void __exit ssb_modexit(void)
- {
--- a/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch