Document a bit more about IPv6 configuration

SVN-Revision: 11891
This commit is contained in:
Florian Fainelli 2008-07-21 09:58:59 +00:00
parent 7f3193a673
commit 6145d81d57

View file

@ -115,6 +115,11 @@ config switch "eth0"
option vlan2 "4 5"
\end{Verbatim}
Three interfaces will be automatically created using this switch layout :
\texttt{eth0.0} (vlan0), \texttt{eth0.1} (vlan1) and \texttt{eth0.2} (vlan2).
You can then assign those interfaces to a custom network configuration name
like \texttt{lan}, \texttt{wan} or \texttt{dmz} for instance.
\subsubsection{Setting up IPv6 connectivity}
OpenWrt supports IPv6 connectivity using PPP, Tunnel brokers or static
@ -123,8 +128,9 @@ assignment.
If you use PPP, IPv6 will be setup using IP6CP and there is nothing to
configure.
To setup an IPv6 tunnel to a tunnel broker, you have to edit the
\texttt{/etc/config/6tunnel} file and change the settings accordingly :
To setup an IPv6 tunnel to a tunnel broker, you can install the
\texttt{6scripts} package and edit the \texttt{/etc/config/6tunnel}
file and change the settings accordingly :
\begin{Verbatim}
config 6tunnel
@ -151,6 +157,17 @@ config 6tunnel
IPv6 prefix to setup on the LAN.
\end{itemize}
Using the same package you can also setup an IPv6 bridged connection :
\begin{Verbatim}
config 6bridge
option bridge 'br6'
\end{Verbatim}
By default the script bridges the WAN interface with the LAN interface
and uses ebtables to filter anything that is not IPv6 on the bridge.
IPv6 static addressing is also supported using a similar setup as
IPv4 but with the \texttt{ip6} prefixing (when applicable).