KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ramips: Add support for Wavlink WL-WN575A3

Browse source 
This commit adds support for the Wavlink WL-WN575A3, a dual-band wall-plug
wireless router with the following specifications:

 - CPU: MediaTek MT7628AN 580MHz
 - Flash: 8MB
 - RAM: 64MB
 - Ethernet: 2x 10/100 Mbps (switched)
 - 2.4 GHz: 802.11b/g/n SoC, MIMO 2x2, 20 dBm
 - 5 GHz: 802.11a/n/ac MT7612E, MIMO 2x2, 20 dBm
 - Antennas: 4x external (2 per radio), non-detachable
 - LEDs: 4 programmable + LAN, WAN, POWER
 - Buttons: reset, WPS

Flashing instructions:

Factory U-boot launches a TFTP client if WPS button is pressed during power-on.
Rename the sysupgrade file and configure a TFTP as follows:

 - Client (WL-WN575A3) IP: 192.168.10.101
 - Server IP: 192.168.10.100
 - Filename: firmware.bin

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
This commit is contained in:
Roger Pueyo Centelles 2016-11-06 13:00:38 +01:00 committed by John Crispin
parent a50243ea1f
commit 5f6e948551
6 changed files with 148 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
target/linux/ramips/base-files/etc/board.d/01_leds
View file

@ -312,6 +312,12 @@ whr-600d)
ucidef_set_led_default "power" "power" "$board:green:power" "1"
ucidef_set_led_default "router" "router" "$board:green:router" "1"
;;
wl-wn575a3)
ucidef_set_rssimon "wlan1" "40000" "1"
ucidef_set_led_rssi "wifi-low" "wifi-low" "$board:green:wifi-low" "wlan1" "1" "49" "0" "1"
ucidef_set_led_rssi "wifi-med" "wifi-med" "$board:green:wifi-med" "wlan1" "50" "84" "0" "1"
ucidef_set_led_rssi "wifi-high" "wifi-high" "$board:green:wifi-high" "wlan1" "85" "100" "0" "1"
;;
wrh-300cr)
set_wifi_led "$board:green:wlan"
ucidef_set_led_netdev "lan" "lan" "$board:green:ethernet" "eth0"

1
target/linux/ramips/base-files/etc/board.d/02_network
View file

@ -90,6 +90,7 @@ ramips_setup_interfaces()
whr-300hp2|\
whr-600d|\
witi|\
wl-wn575a3|\
wndr3700v5|\
wsr-1166|\
wsr-600|\

3
target/linux/ramips/base-files/lib/ramips.sh
View file

@ -499,6 +499,9 @@ ramips_board_detect() {
*"WL-351 v1 002")
name="wl-351"
;;
*"WL-WN575A3")
name="wl-wn575a3"
;;
*"WLI-TX4-AG300N")
name="wli-tx4-ag300n"
;;

1
target/linux/ramips/base-files/lib/upgrade/platform.sh
View file

@ -145,6 +145,7 @@ platform_check_image() {
wl-330n3g|\
wl-341v3|\
wl-351|\
wl-wn575a3|\
wli-tx4-ag300n|\
wmr-300|\
wnce2001|\

130
target/linux/ramips/dts/WL-WN575A3.dts Normal file
View file

@ -0,0 +1,130 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "mt7628an.dtsi"
/ {
compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc";
model = "Wavlink WL-WN575A3";
chosen {
bootargs = "console=ttyS0,57600";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
wifi-high {
label = "wl-wn575a3:green:wifi-high";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
wifi-med {
label = "wl-wn575a3:green:wifi-med";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
wifi-low {
label = "wl-wn575a3:green:wifi-low";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
wps {
label = "wl-wn575a3:green:wps";
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "wled_an";
ralink,function = "gpio";
};
};
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
mediatek,2ghz = <0>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "en25q64";
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0x4>;
};
&ethernet {
mtd-mac-address = <&factory 0x2e>;
ralink,port-map = "llllw";
};

7
target/linux/ramips/image/mt7628.mk
View file

@ -19,6 +19,13 @@ define Device/miwifi-nano
endef
TARGET_DEVICES += miwifi-nano
define Device/wl-wn575a3
DTS := WL-WN575A3
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_TITLE := Wavlink WL-WN575A3
endef
TARGET_DEVICES += wl-wn575a3
define Device/wrtnode2p
DTS := WRTNODE2P
IMAGE_SIZE := $(ralink_default_fw_size_16M)