added Linksys WRT54GS v1.1 docs
SVN-Revision: 988
This commit is contained in:
Imre Kaloz
parent
3adebcf686
commit
56640c7763
5 changed files with 246 additions and 0 deletions
11
openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt
Normal file
11
openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt
Normal file
|
|
@ -0,0 +1,11 @@
|
||||||
|
system type : Broadcom BCM947XX
|
||||||
|
processor : 0
|
||||||
|
cpu model : BCM3302 V0.7
|
||||||
|
BogoMIPS : 215.44
|
||||||
|
wait instruction : no
|
||||||
|
microsecond timers : yes
|
||||||
|
tlb_entries : 32
|
||||||
|
extra interrupt vector : no
|
||||||
|
hardware watchpoint : no
|
||||||
|
VCED exceptions : not available
|
||||||
|
VCEI exceptions : not available
|
||||||
83
openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt
Normal file
83
openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt
Normal file
|
|
@ -0,0 +1,83 @@
|
||||||
|
CPU revision is: 00029007
|
||||||
|
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
|
||||||
|
Primary data cache 4kB, 2-way, linesize 16 bytes.
|
||||||
|
Linux version 2.4.30 (kaloz@richese) (gcc version 3.4.3) #1 2005. máj. 20., péntek, 16.07.34 CEST
|
||||||
|
Determined physical RAM map:
|
||||||
|
memory: 02000000 @ 00000000 (usable)
|
||||||
|
On node 0 totalpages: 8192
|
||||||
|
zone(0): 8192 pages.
|
||||||
|
zone(1): 0 pages.
|
||||||
|
zone(2): 0 pages.
|
||||||
|
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
|
||||||
|
CPU: BCM4712 rev 1 at 216 MHz
|
||||||
|
Using 108.000 MHz high precision timer.
|
||||||
|
Calibrating delay loop... 215.44 BogoMIPS
|
||||||
|
Memory: 30256k/32768k available (1512k kernel code, 2512k reserved, 104k data, 88k init, 0k highmem)
|
||||||
|
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
|
||||||
|
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
|
||||||
|
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
|
||||||
|
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
|
||||||
|
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
|
||||||
|
Checking for 'wait' instruction... unavailable.
|
||||||
|
POSIX conformance testing by UNIFIX
|
||||||
|
PCI: Disabled
|
||||||
|
PCI: Fixing up bus 0
|
||||||
|
Linux NET4.0 for Linux 2.4
|
||||||
|
Based upon Swansea University Computer Society NET3.039
|
||||||
|
Initializing RT netlink socket
|
||||||
|
Starting kswapd
|
||||||
|
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
|
||||||
|
devfs: boot_options: 0x1
|
||||||
|
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
|
||||||
|
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
|
||||||
|
pty: 256 Unix98 ptys configured
|
||||||
|
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
|
||||||
|
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
|
||||||
|
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
|
||||||
|
Software Watchdog Timer: 0.05, timer margin: 60 sec
|
||||||
|
loop: loaded (max 8 devices)
|
||||||
|
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
|
||||||
|
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
|
||||||
|
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
|
||||||
|
cfi_cmdset_0001: Erase suspend on write enabled
|
||||||
|
0: offset=0x0,size=0x20000,blocks=64
|
||||||
|
Using buffer write method
|
||||||
|
Flash device: 0x800000 at 0x1c000000
|
||||||
|
Creating 4 MTD partitions on "Physically mapped flash":
|
||||||
|
0x00000000-0x00040000 : "pmon"
|
||||||
|
0x00040000-0x007e0000 : "linux"
|
||||||
|
0x000c0000-0x007e0000 : "rootfs"
|
||||||
|
0x007e0000-0x00800000 : "nvram"
|
||||||
|
Initializing Cryptographic API
|
||||||
|
NET4: Linux TCP/IP 1.0 for NET4.0
|
||||||
|
IP Protocols: ICMP, UDP, TCP, IGMP
|
||||||
|
IP: routing cache hash table of 512 buckets, 4Kbytes
|
||||||
|
TCP: Hash tables configured (established 2048 bind 4096)
|
||||||
|
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack
|
||||||
|
ip_tables: (C) 2000-2002 Netfilter core team
|
||||||
|
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
|
||||||
|
NET4: Ethernet Bridge 008 for NET4.0
|
||||||
|
Bridge firewalling registered
|
||||||
|
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
|
||||||
|
All bugs added by David S. Miller <davem@redhat.com>
|
||||||
|
VFS: Mounted root (jffs2 filesystem) readonly.
|
||||||
|
Mounted devfs on /dev
|
||||||
|
Freeing unused kernel memory: 88k freed
|
||||||
|
Algorithmics/MIPS FPU Emulator v1.5
|
||||||
|
diag boardtype: 00000708
|
||||||
|
jffs2.bbc: SIZE compression mode activated.
|
||||||
|
b44.c:v0.93 (Mar, 2004)
|
||||||
|
PCI: Setting latency timer of device 00:02.0 to 64
|
||||||
|
eth0: Broadcom 47xx 10/100BaseT Ethernet 00:13:10:07:ee:fc
|
||||||
|
PCI: Setting latency timer of device 00:01.0 to 64
|
||||||
|
eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
|
||||||
|
device eth0 entered promiscuous mode
|
||||||
|
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
|
||||||
|
device eth1 entered promiscuous mode
|
||||||
|
br0: port 2(eth1) entering learning state
|
||||||
|
br0: port 1(vlan0) entering learning state
|
||||||
|
br0: port 2(eth1) entering forwarding state
|
||||||
|
br0: topology change detected, propagating
|
||||||
|
br0: port 1(vlan0) entering forwarding state
|
||||||
|
br0: topology change detected, propagating
|
||||||
|
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
|
||||||
21
openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt
Normal file
21
openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt
Normal file
|
|
@ -0,0 +1,21 @@
|
||||||
|
Linksys WRT54GS v1.1
|
||||||
|
|
||||||
|
Online Description from Linksys:
|
||||||
|
http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=610
|
||||||
|
|
||||||
|
CPU: BCM4712 at 216 MHz
|
||||||
|
RAM: 32 MB
|
||||||
|
Flash: 8 MB
|
||||||
|
1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
|
||||||
|
1 Broadcom BCM4320 802.11 Wireless Controller
|
||||||
|
serial port possible
|
||||||
|
JTAG interface
|
||||||
|
|
||||||
|
List of files:
|
||||||
|
nvram.txt: contents of NVRAM after nvram erase and adjusted cpu speed
|
||||||
|
cpuinfo.txt: contents of /proc/cpuinfo with adjusted cpu speed (2.4.30)
|
||||||
|
pci.txt: contents of /proc/pci (2.4.30)
|
||||||
|
dmesg-2_4_30.txt: dmesg from Kernel 2.4.30 (using b44 and robocfg)
|
||||||
|
|
||||||
|
Notes:
|
||||||
|
CPU runs at 200MHz default, You should adjust it to 216Mhz, as that fixes the problems during high network load.
|
||||||
94
openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt
Normal file
94
openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt
Normal file
|
|
@ -0,0 +1,94 @@
|
||||||
|
wl0_net_mode=mixed
|
||||||
|
os_ram_addr=80001000
|
||||||
|
wl0_frameburst=off
|
||||||
|
boardrev=0x10
|
||||||
|
il0macaddr=00:13:10:07:ee:fe
|
||||||
|
bootnv_ver=2
|
||||||
|
et0macaddr=00:13:10:07:EE:FC
|
||||||
|
boot_wait=on
|
||||||
|
watchdog=5000
|
||||||
|
wl0_infra=1
|
||||||
|
wl0_country_code=AU
|
||||||
|
et0mdcport=0
|
||||||
|
pmon_ver=CFE 3.61.13.0
|
||||||
|
wl0_ifname=eth1
|
||||||
|
gpio5=robo_reset
|
||||||
|
vlan0ports=1 2 3 4 5*
|
||||||
|
wl0_mode=ap
|
||||||
|
wl0_ap_isolate=0
|
||||||
|
os_flash_addr=bfc40000
|
||||||
|
wl0_gmode=6
|
||||||
|
sromrev=2
|
||||||
|
boardtype=0x0708
|
||||||
|
lan_netmask=255.255.255.0
|
||||||
|
wl0_dtim=1
|
||||||
|
wl0_ssid=OpenWrt
|
||||||
|
wl0_key1=
|
||||||
|
wl0id=0x4320
|
||||||
|
wl0_key2=
|
||||||
|
wl0_key3=
|
||||||
|
wl0_key4=
|
||||||
|
ag0=255
|
||||||
|
wl0_plcphdr=long
|
||||||
|
wl0_rate=0
|
||||||
|
wl0_closed=0
|
||||||
|
wl0_macmode=disabled
|
||||||
|
wl0_radioids=BCM2050
|
||||||
|
wl0_phytype=g
|
||||||
|
wl0gpio2=0
|
||||||
|
wl0_lazywds=0
|
||||||
|
wl0gpio3=0
|
||||||
|
boardflags2=0
|
||||||
|
wl0_afterburner=auto
|
||||||
|
wl0_antdiv=-1
|
||||||
|
wl0_wpa_psk=
|
||||||
|
wl0_unit=0
|
||||||
|
wl_country_code=AU
|
||||||
|
pa0itssit=62
|
||||||
|
wl0_wds=
|
||||||
|
cctl=0
|
||||||
|
wl0_radius_port=1812
|
||||||
|
wl0_auth=0
|
||||||
|
wl0_radius_ipaddr=
|
||||||
|
pa0maxpwr=0x4e
|
||||||
|
clkfreq=216
|
||||||
|
lan_ipaddr=192.168.1.1
|
||||||
|
vlan1hwname=et0
|
||||||
|
aa0=3
|
||||||
|
wl0_phytypes=g
|
||||||
|
wl0_frag=2346
|
||||||
|
wl0_wep=disabled
|
||||||
|
sdram_config=0x0062
|
||||||
|
wl0_country=
|
||||||
|
vlan1ports=0 5
|
||||||
|
scratch=a0180000
|
||||||
|
eou_private_key=3979dac822dd40eb1739886261d8c48fc437335ed9b2d851aba651c25718c2fd3e1a4607373b1e3570d5d79adafab37767853749eee724bb7b60d4ed1dae316144c33b1e39547f25d4e9a7b13df509a902f60e76d0db8f5089020b274792b4c39895fa45c88dfe73d544de5d0fed9ac1610309756c6632d2811a6a255769b0c9
|
||||||
|
ccode=0
|
||||||
|
wl0_rateset=default
|
||||||
|
eou_device_id=F7QVRQQK
|
||||||
|
boardflags=0x0318
|
||||||
|
sdram_refresh=0x0000
|
||||||
|
sdram_ncdl=0xff0007
|
||||||
|
wl0_rts=2347
|
||||||
|
wl0_wpa_gtk_rekey=3600
|
||||||
|
wl0_key=1
|
||||||
|
et0phyaddr=30
|
||||||
|
wl0_radio=1
|
||||||
|
wl0_bcn=100
|
||||||
|
wl0_hwaddr=00:13:10:07:EE:FE
|
||||||
|
wl0_gmode_protection=auto
|
||||||
|
pa0b0=0x15eb
|
||||||
|
wl0_maclist=
|
||||||
|
pa0b1=0xfa82
|
||||||
|
pa0b2=0xfe66
|
||||||
|
sdram_init=0x000b
|
||||||
|
vlan0hwname=et0
|
||||||
|
dl_ram_addr=a0001000
|
||||||
|
wl0_radius_key=
|
||||||
|
wl0_corerev=7
|
||||||
|
wl0_channel=11
|
||||||
|
wl0_auth_mode=open
|
||||||
|
boot_ver=v3.4
|
||||||
|
wl0_crypto=tkip
|
||||||
|
boardnum=42
|
||||||
|
eou_public_key=c36b1b0edcf0431f4ef6cfb4e647691c01887b75b0f9ac48e1357c618e8763c36cbfbae5556299e8e60a4374e8879562c65e88c82c45167d70493a5964e9db1942bc4b73b6d3571249294298a429ca8b199b8f48e2df35ceff68aec2dee787a18167ddc78876cd179f26f016ab1d7722c7d284a76e42e0ebb3fb32d984e10b2b11
|
||||||
37
openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt
Normal file
37
openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt
Normal file
|
|
@ -0,0 +1,37 @@
|
||||||
|
PCI devices found:
|
||||||
|
Bus 0, device 0, function 0:
|
||||||
|
Class 0501: PCI device 14e4:0800 (rev 1).
|
||||||
|
IRQ 3.
|
||||||
|
Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
|
||||||
|
Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
|
||||||
|
Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
|
||||||
|
Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
|
||||||
|
Bus 0, device 1, function 0:
|
||||||
|
Class 0280: PCI device 14e4:4320 (rev 1).
|
||||||
|
IRQ 4.
|
||||||
|
Master Capable. Latency=64.
|
||||||
|
Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
|
||||||
|
Bus 0, device 2, function 0:
|
||||||
|
Class 0200: PCI device 14e4:4713 (rev 1).
|
||||||
|
IRQ 5.
|
||||||
|
Master Capable. Latency=64.
|
||||||
|
Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
|
||||||
|
Bus 0, device 3, function 0:
|
||||||
|
Class 0c03: PCI device 14e4:4717 (rev 1).
|
||||||
|
IRQ 6.
|
||||||
|
Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
|
||||||
|
Bus 0, device 4, function 0:
|
||||||
|
Class 0c03: PCI device 14e4:4716 (rev 1).
|
||||||
|
IRQ 2.
|
||||||
|
Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
|
||||||
|
Bus 0, device 5, function 0:
|
||||||
|
Class 0b30: PCI device 14e4:0816 (rev 1).
|
||||||
|
IRQ 2.
|
||||||
|
Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
|
||||||
|
Bus 0, device 6, function 0:
|
||||||
|
Class 0500: PCI device 14e4:080f (rev 1).
|
||||||
|
IRQ 3.
|
||||||
|
Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
|
||||||
|
Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
|
||||||
|
Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
|
||||||
|
Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].
|
||||||
Loading…
Reference in a new issue