fixup patches after r27234

SVN-Revision: 27235

target/linux/brcm63xx/patches-2.6.39/007-usb-ohci-support.patch

@@ -52,7 +52,7 @@ Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
  #include <board_bcm963xx.h>
  
  #define PFX	"board_bcm963xx: "
-@@ -871,6 +872,9 @@ int __init board_register_devices(void)
+@@ -877,6 +878,9 @@ int __init board_register_devices(void)
  	    !board_get_mac_address(board.enet1.mac_addr))
  		bcm63xx_enet_register(1, &board.enet1);
  

target/linux/brcm63xx/patches-2.6.39/008-usb-ehci-support.patch

@@ -44,7 +44,7 @@ Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
  #include <board_bcm963xx.h>
  
  #define PFX	"board_bcm963xx: "
-@@ -872,6 +873,9 @@ int __init board_register_devices(void)
+@@ -878,6 +879,9 @@ int __init board_register_devices(void)
  	    !board_get_mac_address(board.enet1.mac_addr))
  		bcm63xx_enet_register(1, &board.enet1);
  

target/linux/brcm63xx/patches-2.6.39/040-bcm963xx_flashmap.patch

@@ -12,7 +12,7 @@ Signed-off-by: Axel Gembe <ago@bastart.eu.org>
 
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -810,20 +810,6 @@ void __init board_setup(void)
+@@ -816,20 +816,6 @@ void __init board_setup(void)
  		panic("unexpected CPU for bcm963xx board");
  }
  
@@ -33,7 +33,7 @@ Signed-off-by: Axel Gembe <ago@bastart.eu.org>
  static struct resource mtd_resources[] = {
  	{
  		.start		= 0,	/* filled at runtime */
-@@ -833,12 +819,9 @@ static struct resource mtd_resources[] =
+@@ -839,12 +825,9 @@ static struct resource mtd_resources[] =
  };
  
  static struct platform_device mtd_dev = {

target/linux/brcm63xx/patches-2.6.39/100-reset_buttons.patch

@@ -43,7 +43,7 @@
  };
  
  static struct board_info __initdata board_FAST2404 = {
-@@ -832,12 +854,23 @@ static struct platform_device bcm63xx_gp
+@@ -838,12 +860,23 @@ static struct platform_device bcm63xx_gp
  	.dev.platform_data	= &bcm63xx_led_data,
  };
  
@@ -67,7 +67,7 @@
  
  	if (board.has_uart0)
  		bcm63xx_uart_register(0);
-@@ -879,5 +912,16 @@ int __init board_register_devices(void)
+@@ -888,5 +921,16 @@ int __init board_register_devices(void)
  
  	platform_device_register(&bcm63xx_gpio_leds);
  

target/linux/brcm63xx/patches-2.6.39/110-gpiodev.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -846,6 +846,10 @@ static struct platform_device mtd_dev =
+@@ -852,6 +852,10 @@ static struct platform_device mtd_dev =
  	.num_resources		= ARRAY_SIZE(mtd_resources),
  };
  
@@ -11,7 +11,7 @@
  static struct gpio_led_platform_data bcm63xx_led_data;
  
  static struct platform_device bcm63xx_gpio_leds = {
-@@ -907,6 +911,8 @@ int __init board_register_devices(void)
+@@ -916,6 +920,8 @@ int __init board_register_devices(void)
  
  	platform_device_register(&mtd_dev);
  

target/linux/brcm63xx/patches-2.6.39/141-led_count.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -875,6 +875,7 @@ int __init board_register_devices(void)
+@@ -881,6 +881,7 @@ int __init board_register_devices(void)
  {
  	u32 val;
  	int button_count = 0;
@@ -8,7 +8,7 @@
  
  	if (board.has_uart0)
  		bcm63xx_uart_register(0);
-@@ -913,7 +914,11 @@ int __init board_register_devices(void)
+@@ -922,7 +923,11 @@ int __init board_register_devices(void)
  
  	platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1);
  

target/linux/brcm63xx/patches-2.6.39/180-udc_preliminary_support.patch

@@ -17,7 +17,7 @@
  };
  
  static struct board_info __initdata board_rta1025w_16 = {
-@@ -903,6 +906,9 @@ int __init board_register_devices(void)
+@@ -909,6 +912,9 @@ int __init board_register_devices(void)
  	if (board.has_dsp)
  		bcm63xx_dsp_register(&board.dsp);
  
@@ -25,8 +25,8 @@
 +		bcm63xx_udc_register();
 +
  	/* read base address of boot chip select (0) */
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ 	if (BCMCPU_IS_6345())
- 	val &= MPI_CSBASE_BASE_MASK;
+ 		val = 0x1fc00000;
 --- /dev/null
 +++ b/arch/mips/bcm63xx/dev-usb-udc.c
 @@ -0,0 +1,58 @@

target/linux/brcm63xx/patches-2.6.39/200-extended-platform-devices.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -909,6 +909,9 @@ int __init board_register_devices(void)
+@@ -915,6 +915,9 @@ int __init board_register_devices(void)
  	if (board.has_udc0)
  		bcm63xx_udc_register();
  
@@ -8,8 +8,8 @@
 +		platform_add_devices(board.devs, board.num_devs);
 +
  	/* read base address of boot chip select (0) */
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ 	if (BCMCPU_IS_6345())
- 	val &= MPI_CSBASE_BASE_MASK;
+ 		val = 0x1fc00000;
 --- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
 @@ -61,6 +61,10 @@ struct board_info {

target/linux/brcm63xx/patches-2.6.39/200-spi-board-info.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -912,6 +912,9 @@ int __init board_register_devices(void)
+@@ -918,6 +918,9 @@ int __init board_register_devices(void)
  	if (board.num_devs)
  		platform_add_devices(board.devs, board.num_devs);
  
@@ -8,8 +8,8 @@
 +		spi_register_board_info(board.spis, board.num_spis);
 +
  	/* read base address of boot chip select (0) */
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ 	if (BCMCPU_IS_6345())
- 	val &= MPI_CSBASE_BASE_MASK;
+ 		val = 0x1fc00000;
 --- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
 @@ -65,6 +65,10 @@ struct board_info {

target/linux/brcm63xx/patches-2.6.39/220-wl_exports.patch

@@ -14,7 +14,7 @@
   * known 6338 boards
   */
  #ifdef CONFIG_BCM63XX_CPU_6338
-@@ -741,6 +748,7 @@ void __init board_prom_init(void)
+@@ -747,6 +754,7 @@ void __init board_prom_init(void)
  
  	/* extract nvram data */
  	memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));

target/linux/brcm63xx/patches-2.6.39/230-6358-enet1-external-mii-clk.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -812,6 +812,8 @@ void __init board_prom_init(void)
+@@ -818,6 +818,8 @@ void __init board_prom_init(void)
  		if (BCMCPU_IS_6348())
  			val |= GPIO_MODE_6348_G3_EXT_MII |
  				GPIO_MODE_6348_G0_EXT_MII;
@@ -11,7 +11,7 @@
  	bcm_gpio_writel(val, GPIO_MODE_REG);
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -401,6 +401,8 @@
+@@ -402,6 +402,8 @@
  #define GPIO_MODE_6358_EXTRA_SPI_SS	(1 << 7)
  #define GPIO_MODE_6358_SERIAL_LED	(1 << 10)
  #define GPIO_MODE_6358_UTOPIA		(1 << 12)

target/linux/brcm63xx/patches-2.6.39/240-spi.patch

@@ -200,7 +200,7 @@
  #define BCM_6358_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 5)
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -805,4 +805,116 @@
+@@ -771,4 +771,116 @@
  #define DMIPSPLLCFG_N2_SHIFT		29
  #define DMIPSPLLCFG_N2_MASK		(0x7 << DMIPSPLLCFG_N2_SHIFT)
  
@@ -990,7 +990,7 @@
  #include <board_bcm963xx.h>
  
  #define PFX	"board_bcm963xx: "
-@@ -925,6 +926,9 @@ int __init board_register_devices(void)
+@@ -931,6 +932,9 @@ int __init board_register_devices(void)
  	if (board.num_spis)
  		spi_register_board_info(board.spis, board.num_spis);
  
@@ -998,5 +998,5 @@
 +		bcm63xx_spi_register();
 +
  	/* read base address of boot chip select (0) */
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ 	if (BCMCPU_IS_6345())
- 	val &= MPI_CSBASE_BASE_MASK;
+ 		val = 0x1fc00000;

target/linux/brcm63xx/patches-2.6.39/250-boardid_fixup.patch

@@ -44,7 +44,7 @@
  /*
   * early init callback, read nvram data from flash and checksum it
   */
-@@ -765,6 +792,11 @@ void __init board_prom_init(void)
+@@ -771,6 +798,11 @@ void __init board_prom_init(void)
  		return;
  	}
  

target/linux/brcm63xx/patches-2.6.39/441-board-NB4.patch

@@ -557,7 +557,7 @@
  /*
   * Register a sane SPROMv2 to make the on-board
   * bcm4318 WLAN work
-@@ -953,6 +1479,9 @@ void __init board_prom_init(void)
+@@ -959,6 +1485,9 @@ void __init board_prom_init(void)
  		boardid_fixup(boot_addr);
  	}
  

target/linux/brcm63xx/patches-2.6.39/452-board_V2500V.patch

@@ -72,9 +72,9 @@
  #endif
  
  #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -2051,6 +2109,22 @@ void __init board_prom_init(void)
+@@ -2057,6 +2115,22 @@ void __init board_prom_init(void)
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ 		val &= MPI_CSBASE_BASE_MASK;
- 	val &= MPI_CSBASE_BASE_MASK;
+ 	}
  	boot_addr = (u8 *)KSEG1ADDR(val);
 +	printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr);
 +
@@ -95,10 +95,11 @@
  
  	/* dump cfe version */
  	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
-@@ -2255,6 +2329,13 @@ int __init board_register_devices(void)
+@@ -2264,6 +2338,14 @@ int __init board_register_devices(void)
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ 		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- 	val &= MPI_CSBASE_BASE_MASK;
+ 		val &= MPI_CSBASE_BASE_MASK;
- 
+ 	}
++
 +	/* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks
 +	 * Loading from CFE always uses Bank 0 */
 +	if (!strcmp(board.name, "V2500V_BB")) {

target/linux/brcm63xx/patches-2.6.39/500-ssb-add-callback-for-sprom.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2136,6 +2136,17 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -2128,6 +2128,17 @@ static struct ssb_sprom bcm63xx_sprom =
  	.boardflags_lo		= 0x2848,
  	.boardflags_hi		= 0x0000,
  };
@@ -18,7 +18,7 @@
  #endif
  
  /*
-@@ -2330,8 +2341,9 @@ void __init board_prom_init(void)
+@@ -2328,8 +2339,9 @@ void __init board_prom_init(void)
  	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
  		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
  		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);

target/linux/brcm63xx/patches-2.6.39/977-ssb_export_fallback_sprom.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2116,7 +2116,7 @@ static void __init nb4_nvram_fixup(void)
+@@ -2108,7 +2108,7 @@ static void __init nb4_nvram_fixup(void)
   * bcm4318 WLAN work
   */
  #ifdef CONFIG_SSB_PCIHOST
@@ -9,7 +9,7 @@
  	.revision		= 0x02,
  	.board_rev		= 0x17,
  	.country_code		= 0x0,
-@@ -2136,6 +2136,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -2128,6 +2128,7 @@ static struct ssb_sprom bcm63xx_sprom =
  	.boardflags_lo		= 0x2848,
  	.boardflags_hi		= 0x0000,
  };