KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ar71xx: add support for ALFA Network N5Q

Browse source 
ALFA Network N5Q is a successor of previous model, the N5 (outdoor
CPE/AP, based on Atheros AR7240 + AR9280). New version is based on
Atheros AR9344.

Specification:

- 550/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet, with passive PoE support (24 V)
- 2T2R 5 GHz (AR9344), with ext. PA (RFPA5542) and LNA, up to 27 dBm
- 8x LED (7 are driven by GPIO)
- 1x button (reset)
- external h/w watchdog (EM6324QYSP5B, disabled and not used)
- header for optional 802.3at/af PoE module
- DC jack for main power input (optional, not installed by default)
- UART header on PCB

Flash instruction:

You can use sysupgrade image directly in vendor firmare which is based
on OpenWrt/LEDE. Alternatively, you can use web recovery mode in U-Boot:

1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
   device, wait for first blink of all LEDs (indicates network setup),
   then keep button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz 2018-01-05 11:35:45 +01:00
parent 62610129b2
commit 4b0eebe9df
12 changed files with 172 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
target/linux/ar71xx/base-files/etc/board.d/01_leds
View file

@ -129,13 +129,21 @@ dr531)
;;
esac
;;
ap91-5g)
ap91-5g|\
n5q)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "signal1" "SIGNAL1" "$board:red:signal1" "wlan0" "1" "100"
ucidef_set_led_rssi "signal2" "SIGNAL2" "$board:orange:signal2" "wlan0" "25" "100"
ucidef_set_led_rssi "signal3" "SIGNAL3" "$board:green:signal3" "wlan0" "50" "100"
ucidef_set_led_rssi "signal4" "SIGNAL4" "$board:green:signal4" "wlan0" "75" "100"
case "$board" in
n5q)
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
esac
;;
bhr-4grv2)
ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"

3
target/linux/ar71xx/base-files/etc/diag.sh
View file

@ -80,7 +80,8 @@ get_status_led() {
gl-mifi)
status_led="$board:green:lan"
;;
ap91-5g)
ap91-5g|\
n5q)
status_led="$board:green:signal4"
;;
ap96)

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View file

@ -768,6 +768,9 @@ ar71xx_board_detect() {
*"MZK-W300NH")
name="mzk-w300nh"
;;
*"N5Q")
name="n5q"
;;
*"Nanostation M")
name="nanostation-m"
ubnt_xm_board_detect

1
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View file

@ -252,6 +252,7 @@ platform_check_image() {
loco-m-xw|\
mzk-w04nu|\
mzk-w300nh|\
n5q|\
nanostation-m|\
nanostation-m-xw|\
nbg460n_550n_550nh|\

1
target/linux/ar71xx/config-4.4
View file

@ -139,6 +139,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_MYNET_REXT is not set
# CONFIG_ATH79_MACH_MZK_W04NU is not set
# CONFIG_ATH79_MACH_MZK_W300NH is not set
# CONFIG_ATH79_MACH_N5Q is not set
# CONFIG_ATH79_MACH_NBG460N is not set
# CONFIG_ATH79_MACH_NBG6716 is not set
# CONFIG_ATH79_MACH_OM2P is not set

1
target/linux/ar71xx/config-4.9
View file

@ -137,6 +137,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_MYNET_REXT is not set
# CONFIG_ATH79_MACH_MZK_W04NU is not set
# CONFIG_ATH79_MACH_MZK_W300NH is not set
# CONFIG_ATH79_MACH_N5Q is not set
# CONFIG_ATH79_MACH_NBG460N is not set
# CONFIG_ATH79_MACH_NBG6716 is not set
# CONFIG_ATH79_MACH_OM2P is not set

8
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View file

@ -2008,6 +2008,14 @@ config ATH79_MACH_ZCN_1523H
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
config ATH79_MACH_N5Q
bool "ALFA Network N5Q support"
select SOC_AR934X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_WMAC
config ATH79_MACH_NBG460N
bool "Zyxel NBG460N/550N/550NH board support"
select SOC_AR913X

1
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View file

@ -147,6 +147,7 @@ obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o
obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o
obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
obj-$(CONFIG_ATH79_MACH_N5Q) += mach-n5q.o
obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
obj-$(CONFIG_ATH79_MACH_RAMBUTAN) += mach-rambutan.o

132
target/linux/ar71xx/files/arch/mips/ath79/mach-n5q.c Normal file
View file

@ -0,0 +1,132 @@
/*
* ALFA Network N5Q board support
*
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define N5Q_GPIO_LED_LAN 19
#define N5Q_GPIO_LED_SIGNAL1 0
#define N5Q_GPIO_LED_SIGNAL2 1
#define N5Q_GPIO_LED_SIGNAL3 2
#define N5Q_GPIO_LED_SIGNAL4 3
#define N5Q_GPIO_LED_WAN 18
#define N5Q_GPIO_LED_WLAN 12
#define N5Q_GPIO_WDT_EN 16
#define N5Q_GPIO_WDT_IN 17
#define N5Q_GPIO_BTN_RESET 11
#define N5Q_MAC0_OFFSET 0
#define N5Q_MAC1_OFFSET 6
#define N5Q_WMAC_CALDATA_OFFSET 0x1000
#define N5Q_KEYS_POLL_INTERVAL 20
#define N5Q_KEYS_DEBOUNCE_INTERVAL (3 * N5Q_KEYS_POLL_INTERVAL)
static struct gpio_led n5q_leds_gpio[] __initdata = {
{
.name = "n5q:green:lan",
.gpio = N5Q_GPIO_LED_LAN,
.active_low = 1,
}, {
.name = "n5q:red:signal1",
.gpio = N5Q_GPIO_LED_SIGNAL1,
.active_low = 1,
}, {
.name = "n5q:orange:signal2",
.gpio = N5Q_GPIO_LED_SIGNAL2,
.active_low = 1,
}, {
.name = "n5q:green:signal3",
.gpio = N5Q_GPIO_LED_SIGNAL3,
.active_low = 1,
}, {
.name = "n5q:green:signal4",
.gpio = N5Q_GPIO_LED_SIGNAL4,
.active_low = 1,
}, {
.name = "n5q:green:wan",
.gpio = N5Q_GPIO_LED_WAN,
.active_low = 1,
}, {
.name = "n5q:green:wlan",
.gpio = N5Q_GPIO_LED_WLAN,
.active_low = 1,
},
};
static struct gpio_keys_button n5q_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = N5Q_KEYS_DEBOUNCE_INTERVAL,
.gpio = N5Q_GPIO_BTN_RESET,
.active_low = 1,
},
};
static void __init n5q_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1f070000);
ath79_register_m25p80(NULL);
ath79_register_mdio(1, 0x0);
ath79_switch_data.phy4_mii_en = 1;
ath79_switch_data.phy_poll_mask = 0xf7;
/* LAN */
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_init_mac(ath79_eth1_data.mac_addr, art + N5Q_MAC1_OFFSET, 0);
ath79_register_eth(1);
/* WAN */
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(4);
ath79_eth0_data.speed = SPEED_100;
ath79_init_mac(ath79_eth0_data.mac_addr, art + N5Q_MAC0_OFFSET, 0);
ath79_register_eth(0);
ath79_register_leds_gpio(-1, ARRAY_SIZE(n5q_leds_gpio),
n5q_leds_gpio);
ath79_register_gpio_keys_polled(-1, N5Q_KEYS_POLL_INTERVAL,
ARRAY_SIZE(n5q_gpio_keys),
n5q_gpio_keys);
gpio_request_one(N5Q_GPIO_WDT_IN,
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
"WDT input");
gpio_request_one(N5Q_GPIO_WDT_EN,
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
"WDT enable");
ath79_register_wmac(art + N5Q_WMAC_CALDATA_OFFSET, NULL);
}
MIPS_MACHINE(ATH79_MACH_N5Q, "N5Q", "ALFA Network N5Q", n5q_setup);

1
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View file

@ -143,6 +143,7 @@ enum ath79_mach_type {
ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */
ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
ATH79_MACH_N5Q, /* ALFA Network N5Q */
ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
ATH79_MACH_NBG6616, /* Zyxel NBG6616 */
ATH79_MACH_NBG6716, /* Zyxel NBG6716 */

1
target/linux/ar71xx/generic/config-default
View file

@ -108,6 +108,7 @@ CONFIG_ATH79_MACH_MYNET_N750=y
CONFIG_ATH79_MACH_MYNET_REXT=y
CONFIG_ATH79_MACH_MZK_W04NU=y
CONFIG_ATH79_MACH_MZK_W300NH=y
CONFIG_ATH79_MACH_N5Q=y
CONFIG_ATH79_MACH_OM2P=y
CONFIG_ATH79_MACH_OM5P=y
CONFIG_ATH79_MACH_OM5P_AC=y

12
target/linux/ar71xx/image/generic.mk
View file

@ -757,6 +757,18 @@ define Device/oolite
endef
TARGET_DEVICES += oolite
define Device/n5q
DEVICE_TITLE := ALFA Network N5Q
DEVICE_PACKAGES := rssileds -swconfig
BOARDNAME := N5Q
SUPPORTED_DEVICES := n5q
IMAGE_SIZE := 15872k
MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += n5q
define Device/NBG6616
DEVICE_TITLE := ZyXEL NBG6616
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k ath10k-firmware-qca988x