KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

nuke old files

Browse source 
SVN-Revision: 15402
This commit is contained in:
Florian Fainelli 2009-04-25 09:58:58 +00:00
parent 73883e9aef
commit 3eb6887491
50 changed files with 0 additions and 9190 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

294
target/linux/rdc/config-2.6.24
View file

@ -1,294 +0,0 @@
# CONFIG_60XX_WDT is not set
# CONFIG_64BIT is not set
# CONFIG_8139TOO is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_AGP is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_BASE_SMALL=0
# CONFIG_BINFMT_AOUT is not set
CONFIG_BITREVERSE=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BOUNCE=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_DCDBAS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_DELL_RBU is not set
CONFIG_DEVPORT=y
# CONFIG_DMADEVICES is not set
CONFIG_DMI=y
CONFIG_DMIID=y
CONFIG_DOUBLEFAULT=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EDAC is not set
# CONFIG_EDD is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_FIXED_PHY is not set
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
# CONFIG_GENERIC_CPU is not set
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
# CONFIG_GEN_RTC is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_HPET_TIMER is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_I2C is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_I8K is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_IDE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_ISA is not set
CONFIG_ISA_DMA_API=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_ITCO_WDT is not set
CONFIG_KEXEC=y
CONFIG_KTIME_SCALAR=y
# CONFIG_KVM is not set
CONFIG_LBD=y
CONFIG_LEDS_GPIO=y
# CONFIG_LGUEST is not set
CONFIG_LSF=y
# CONFIG_M386 is not set
CONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M586MMX is not set
# CONFIG_M586TSC is not set
# CONFIG_M686 is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_MATH_EMULATION=y
# CONFIG_MCA is not set
# CONFIG_MCORE2 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MICROCODE is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPSC is not set
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_MTD_BLOCK2MTD is not set
CONFIG_MTD_CFI=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_CHAR=y
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_START=0x8000000
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_PNC2000 is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_RDC3210=y
CONFIG_MTD_RDC3210_ALLOW_JFFS2=y
CONFIG_MTD_RDC3210_BUSWIDTH=2
# CONFIG_MTD_RDC3210_FACTORY_PRESENT is not set
CONFIG_MTD_RDC3210_SIZE=0x400000
# CONFIG_MTD_RDC3210_STATIC_MAP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTRR is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NOHIGHMEM=y
CONFIG_NO_HZ=y
CONFIG_NR_QUICK=1
# CONFIG_NSC_GPIO is not set
CONFIG_NVRAM=y
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_PC87413_WDT is not set
CONFIG_PCI=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_GOANY=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOMMCONFIG is not set
CONFIG_PHYLIB=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_PHYSICAL_START=0x100000
# CONFIG_QSEMI_PHY is not set
CONFIG_QUICKLIST=y
# CONFIG_R6040 is not set
# CONFIG_RELOCATABLE is not set
# CONFIG_RTC is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SBC7240_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_SC520_WDT is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCx200 is not set
CONFIG_SEMAPHORE_SLEEPERS=y
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SLABINFO=y
# CONFIG_SMP is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TELCLOCK is not set
CONFIG_TICK_ONESHOT=y
# CONFIG_TOSHIBA is not set
CONFIG_UID16=y
# CONFIG_USER_NS is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIA_RHINE is not set
CONFIG_VIRTUALIZATION=y
# CONFIG_VM86 is not set
# CONFIG_VMSPLIT_1G is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_WAFER_WDT is not set
CONFIG_X86=y
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86_ALIGNMENT_16=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_BSWAP=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_CPUID=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_ES7000 is not set
CONFIG_X86_F00F_BUG=y
# CONFIG_X86_GENERIC is not set
# CONFIG_X86_GENERICARCH is not set
CONFIG_X86_INVLPG=y
CONFIG_X86_L1_CACHE_SHIFT=4
# CONFIG_X86_MCE is not set
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_MSR=y
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_PAE is not set
# CONFIG_X86_PC is not set
CONFIG_X86_POPAD_OK=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_RDC=y
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_XADD=y
# CONFIG_ZONE_DMA32 is not set

373
target/linux/rdc/config-2.6.25
View file

@ -1,373 +0,0 @@
# CONFIG_60XX_WDT is not set
# CONFIG_64BIT is not set
# CONFIG_8139TOO is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_AGP is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_ARCH_HAS_CPU_RELAX=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SUPPORTS_AOUT=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ATA is not set
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_BASE_SMALL=0
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_BITREVERSE=y
# CONFIG_BLK_DEV_IDE is not set
# CONFIG_BLK_DEV_IDEDISK is not set
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_BOUNCE=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_CLASSIC_RCU=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
# CONFIG_CRYPTO_AEAD is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_DCDBAS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DELL_RBU is not set
CONFIG_DEVPORT=y
# CONFIG_DMADEVICES is not set
CONFIG_DMI=y
CONFIG_DMIID=y
CONFIG_DOUBLEFAULT=y
# CONFIG_E100 is not set
# CONFIG_E1000E_ENABLED is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EDAC is not set
# CONFIG_EDD is not set
# CONFIG_EUROTECH_WDT is not set
CONFIG_FAST_CMPXCHG_LOCAL=y
# CONFIG_FIXED_PHY is not set
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
# CONFIG_GENERIC_CPU is not set
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_GENERIC_LOCKBREAK is not set
# CONFIG_GENERIC_TIME_VSYSCALL is not set
# CONFIG_GEN_RTC is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HID is not set
CONFIG_HID_SUPPORT=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_HPET_TIMER is not set
# CONFIG_HP_WATCHDOG is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_I2C is not set
# CONFIG_I2C_ALGOBIT is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I6300ESB_WDT is not set
# CONFIG_I8K is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_IBM_ASM is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_IDE is not set
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_IDE_GENERIC is not set
# CONFIG_IDE_PROC_FS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_INPUT is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GPIO_BUTTONS is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_YEALINK is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_TYPE_UDELAY=2
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_ISA is not set
CONFIG_ISA_DMA_API=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_JFS_FS is not set
CONFIG_KEXEC=y
CONFIG_KTIME_SCALAR=y
# CONFIG_KVM is not set
# CONFIG_LATENCYTOP is not set
CONFIG_LBD=y
# CONFIG_LEDS_ALIX is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LGUEST is not set
CONFIG_LSF=y
# CONFIG_LZO_COMPRESS is not set
# CONFIG_LZO_DECOMPRESS is not set
# CONFIG_M386 is not set
CONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M586MMX is not set
# CONFIG_M586TSC is not set
# CONFIG_M686 is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_MATH_EMULATION=y
# CONFIG_MCA is not set
# CONFIG_MCORE2 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MEMSTICK is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MICROCODE is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPSC is not set
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_MTD_BLOCK2MTD is not set
CONFIG_MTD_CFI=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_RDC3210=y
CONFIG_MTD_RDC3210_ALLOW_JFFS2=y
CONFIG_MTD_RDC3210_BUSWIDTH=2
# CONFIG_MTD_RDC3210_FACTORY_PRESENT is not set
CONFIG_MTD_RDC3210_SIZE=0x400000
# CONFIG_MTD_RDC3210_STATIC_MAP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTRR is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NOHIGHMEM=y
# CONFIG_NSC_GPIO is not set
CONFIG_NVRAM=y
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_PCCARD is not set
# CONFIG_PCCARD_NONSTATIC is not set
CONFIG_PCI=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_GOANY=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCMCIA is not set
CONFIG_PHYLIB=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_PHYSICAL_START=0x100000
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_R6040 is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_RELOCATABLE is not set
# CONFIG_RTC is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SBC7240_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SCHED_HRTICK is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_WAIT_SCAN is not set
# CONFIG_SCx200 is not set
# CONFIG_SCx200_ACB is not set
CONFIG_SEMAPHORE_SLEEPERS=y
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SLABINFO=y
# CONFIG_SMP is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SONYPI is not set
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TELCLOCK is not set
# CONFIG_TICK_ONESHOT is not set
# CONFIG_TOSHIBA is not set
CONFIG_UID16=y
# CONFIG_USB is not set
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VGASTATE is not set
# CONFIG_VIA_RHINE is not set
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_VIDEO_V4L1=y
# CONFIG_VIDEO_V4L2_COMMON is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTUALIZATION=y
# CONFIG_VM86 is not set
# CONFIG_VMSPLIT_1G is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_WAFER_WDT is not set
CONFIG_X86=y
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86_ALIGNMENT_16=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_BSWAP=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_CPUID=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_ES7000 is not set
CONFIG_X86_F00F_BUG=y
# CONFIG_X86_GENERIC is not set
# CONFIG_X86_GENERICARCH is not set
CONFIG_X86_INVLPG=y
CONFIG_X86_L1_CACHE_SHIFT=4
# CONFIG_X86_MCE is not set
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_MSR=y
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_PAE is not set
# CONFIG_X86_PC is not set
CONFIG_X86_POPAD_OK=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_RDC321X=y
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_XADD=y
# CONFIG_ZONE_DMA32 is not set

330
target/linux/rdc/config-2.6.27
View file

@ -1,330 +0,0 @@
# CONFIG_4KSTACKS is not set
# CONFIG_60XX_WDT is not set
# CONFIG_64BIT is not set
# CONFIG_8139TOO is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_AGP is not set
# CONFIG_ALIM1535_WDT is not set
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SUPPORTS_AOUT=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_BASE_SMALL=0
# CONFIG_BINFMT_AOUT is not set
CONFIG_BITREVERSE=y
CONFIG_BOUNCE=y
CONFIG_CLASSIC_RCU=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_DCDBAS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DELL_RBU is not set
CONFIG_DEVPORT=y
CONFIG_DMI=y
CONFIG_DMIID=y
CONFIG_DOUBLEFAULT=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EDAC is not set
# CONFIG_EDD is not set
# CONFIG_EUROTECH_WDT is not set
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_FIXED_PHY is not set
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
# CONFIG_GENERIC_CPU is not set
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_GENERIC_LOCKBREAK is not set
# CONFIG_GENERIC_TIME_VSYSCALL is not set
# CONFIG_GEN_RTC is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_CLK is not set
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_HPET_TIMER is not set
# CONFIG_HP_WATCHDOG is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_I2C is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_I8K is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_IDE is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IOMMU_HELPER is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_TYPE_UDELAY=2
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_ISA is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_LZMA=y
CONFIG_KEXEC=y
CONFIG_KMOD=y
CONFIG_KTIME_SCALAR=y
# CONFIG_KVM is not set
CONFIG_LBD=y
# CONFIG_LEDS_ALIX is not set
# CONFIG_LGUEST is not set
CONFIG_LSF=y
# CONFIG_M386 is not set
CONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M586MMX is not set
# CONFIG_M586TSC is not set
# CONFIG_M686 is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_MATH_EMULATION=y
# CONFIG_MCA is not set
# CONFIG_MCORE2 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MEMTEST is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MICROCODE is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPSC is not set
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_MTD_BLOCK2MTD is not set
CONFIG_MTD_CFI=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_RDC3210=y
CONFIG_MTD_RDC3210_ALLOW_JFFS2=y
CONFIG_MTD_RDC3210_BUSWIDTH=2
# CONFIG_MTD_RDC3210_FACTORY_PRESENT is not set
CONFIG_MTD_RDC3210_SIZE=0x400000
# CONFIG_MTD_RDC3210_STATIC_MAP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTRR is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_NATSEMI is not set
CONFIG_NOHIGHMEM=y
# CONFIG_NSC_GPIO is not set
CONFIG_NVRAM=y
# CONFIG_OLPC is not set
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_PC87413_WDT is not set
CONFIG_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_GOANY=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_PHYLIB=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_PHYSICAL_START=0x100000
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_R6040 is not set
CONFIG_RDC321X_WDT=y
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_GZIP=y
# CONFIG_RD_LZMA is not set
# CONFIG_RELOCATABLE is not set
# CONFIG_RTC is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SBC7240_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SCHED_HRTICK is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCx200 is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SMP is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_SYSPROF_TRACER is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TELCLOCK is not set
# CONFIG_TICK_ONESHOT is not set
# CONFIG_TOSHIBA is not set
CONFIG_UID16=y
CONFIG_USB_SUPPORT=y
# CONFIG_VGASTATE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTUALIZATION=y
# CONFIG_VM86 is not set
# CONFIG_VMSPLIT_1G is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_WAFER_WDT is not set
CONFIG_X86=y
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_BSWAP=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_CPU=y
CONFIG_X86_CPUID=y
# CONFIG_X86_ELAN is not set
CONFIG_X86_F00F_BUG=y
# CONFIG_X86_GENERIC is not set
# CONFIG_X86_GENERICARCH is not set
CONFIG_X86_INVLPG=y
CONFIG_X86_L1_CACHE_SHIFT=4
# CONFIG_X86_MCE is not set
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_MSR=y
# CONFIG_X86_PAE is not set
CONFIG_X86_PC=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_RDC321X=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_XADD=y
# CONFIG_ZONE_DMA32 is not set

24
target/linux/rdc/files-2.6.24/arch/i386/kernel/cpu/rdc.c
View file

@ -1,24 +0,0 @@
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/mm.h>
#include <asm/io.h>
#include <asm/processor.h>
#include "cpu.h"
static struct cpu_dev rdc_cpu_dev __cpuinitdata = {
.c_vendor = "RDC",
.c_models = {
{ .vendor = X86_VENDOR_RDC, .family = 4, .model_names =
{
[0] = "R861x(-G)",
}
},
},
};
int __init rdc_init_cpu(void)
{
cpu_devs[X86_VENDOR_RDC] = &rdc_cpu_dev;
return 0;
}

5
target/linux/rdc/files-2.6.24/arch/i386/mach-rdc/Makefile
View file

@ -1,5 +0,0 @@
#
# Makefile for the RDC321x specific parts of the kernel
#
obj-$(CONFIG_X86_RDC) := gpio.o platform.o wdt.o

91
target/linux/rdc/files-2.6.24/arch/i386/mach-rdc/gpio.c
View file

@ -1,91 +0,0 @@
/*
* Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
* RDC321x architecture specific GPIO support
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/autoconf.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <asm/mach-rdc/rdc321x_defs.h>
static inline int rdc_gpio_is_valid(unsigned gpio)
{
return (gpio <= RDC_MAX_GPIO);
}
static unsigned int rdc_gpio_read(unsigned gpio)
{
unsigned int val;
val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48));
outl(val, RDC3210_CFGREG_ADDR);
udelay(10);
val = inl(RDC3210_CFGREG_DATA);
val |= (0x1 << (gpio & 0x1F));
outl(val, RDC3210_CFGREG_DATA);
udelay(10);
val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C));
outl(val, RDC3210_CFGREG_ADDR);
udelay(10);
val = inl(RDC3210_CFGREG_DATA);
return val;
}
static void rdc_gpio_write(unsigned int val)
{
if (val) {
outl(val, RDC3210_CFGREG_DATA);
udelay(10);
}
}
int rdc_gpio_get_value(unsigned gpio)
{
if (rdc_gpio_is_valid(gpio))
return (int)rdc_gpio_read(gpio);
else
return -EINVAL;
}
EXPORT_SYMBOL(rdc_gpio_get_value);
void rdc_gpio_set_value(unsigned gpio, int value)
{
unsigned int val;
if (!rdc_gpio_is_valid(gpio))
return;
val = rdc_gpio_read(gpio);
if (value)
val &= ~(0x1 << (gpio & 0x1F));
else
val |= (0x1 << (gpio & 0x1F));
rdc_gpio_write(val);
}
EXPORT_SYMBOL(rdc_gpio_set_value);
int rdc_gpio_direction_input(unsigned gpio)
{
return 0;
}
EXPORT_SYMBOL(rdc_gpio_direction_input);
int rdc_gpio_direction_output(unsigned gpio, int value)
{
return 0;
}
EXPORT_SYMBOL(rdc_gpio_direction_output);

263
target/linux/rdc/files-2.6.24/arch/i386/mach-rdc/platform.c
View file

@ -1,263 +0,0 @@
/*
*
* Generic RDC321x platform devices
*
* Copyright (C) 2007-2008 OpenWrt.org
* Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
* Copyright (C) 2008 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/version.h>
#include <linux/leds.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/root_dev.h>
#include <asm/gpio.h>
/* Flash */
#ifdef CONFIG_MTD_RDC3210
static struct resource rdc_flash_resource[] = {
[0] = {
.start = (u32)-CONFIG_MTD_RDC3210_SIZE,
.end = (u32)-1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device rdc_flash_device = {
.name = "rdc321x-flash",
.id = -1,
.num_resources = ARRAY_SIZE(rdc_flash_resource),
.resource = rdc_flash_resource,
};
#else
static struct mtd_partition rdc_flash_parts[15];
static struct resource rdc_flash_resource = {
.end = (u32)-1,
.flags = IORESOURCE_MEM,
};
static struct physmap_flash_data rdc_flash_data = {
.parts = rdc_flash_parts,
};
static struct platform_device rdc_flash_device = {
.name = "physmap-flash",
.id = -1,
.resource = &rdc_flash_resource,
.num_resources = 1,
.dev.platform_data = &rdc_flash_data,
};
#endif
/* LEDS */
static struct gpio_led default_leds[] = {
{ .name = "rdc321x:dmz", .gpio = 1, },
};
static struct gpio_led_platform_data rdc321x_led_data = {
.num_leds = ARRAY_SIZE(default_leds),
.leds = default_leds,
};
static struct platform_device rdc321x_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &rdc321x_led_data,
}
};
/* Watchdog */
static struct platform_device rdc321x_wdt = {
.name = "rdc321x-wdt",
.id = -1,
.num_resources = 0,
};
/* Button */
static struct gpio_keys_button rdc321x_gpio_btn[] = {
{
.gpio = 0,
.code = BTN_0,
.desc = "Reset",
.active_low = 1,
}
};
static struct gpio_keys_platform_data rdc321x_gpio_btn_data = {
.buttons = rdc321x_gpio_btn,
.nbuttons = ARRAY_SIZE(rdc321x_gpio_btn),
};
static struct platform_device rdc321x_button = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &rdc321x_gpio_btn_data,
}
};
static struct platform_device *rdc321x_devs[] = {
&rdc_flash_device,
&rdc321x_leds,
&rdc321x_wdt,
&rdc321x_button
};
static int probe_flash_start(struct map_info *the_map)
{
struct mtd_info *res;
the_map->virt = ioremap(the_map->phys, the_map->size);
if (the_map->virt == NULL)
return 1;
for (the_map->bankwidth = 32; the_map->bankwidth; the_map->bankwidth
>>= 1) {
res = do_map_probe("cfi_probe", the_map);
if (res == NULL)
res = do_map_probe("jedec_probe", the_map);
if (res != NULL)
break;
}
iounmap(the_map->virt);
if (res != NULL)
the_map->phys = (u32)-(s32)(the_map->size = res->size);
return res == NULL;
}
static __init int rdc_board_setup(void)
{
#ifndef CONFIG_MTD_RDC3210
struct map_info rdc_map_info;
u32 the_header[4];
ROOT_DEV = 0;
rdc_map_info.name = rdc_flash_device.name;
rdc_map_info.phys = 0xff000000;
rdc_map_info.size = 0x1000000;
rdc_map_info.bankwidth = 2;
rdc_map_info.set_vpp = NULL;
simple_map_init(&rdc_map_info);
while (probe_flash_start(&rdc_map_info)) {
rdc_map_info.phys++;
if (--rdc_map_info.size)
panic("Not to be or to be: That"
" is not the question.");
}
rdc_flash_resource.start = rdc_map_info.phys;
rdc_flash_data.width = rdc_map_info.bankwidth;
rdc_map_info.virt = (u32)ioremap_nocache(rdc_map_info.phys, 0x10);
if (rdc_map_info.virt == NULL)
panic("Something's rotten in Denmark!");
the_header[0] = ((u32 *)rdc_map_info.virt)[0];
the_header[1] = ((u32 *)rdc_map_info.virt)[1];
the_header[2] = ((u32 *)rdc_map_info.virt)[2];
the_header[3] = ((u32 *)rdc_map_info.virt)[3];
iounmap(rdc_map_info.virt);
if (!memcmp(the_header, "GMTK", 4)) { /* Gemtek */
/* TODO */
} else if (!memcmp(the_header, "CSYS", 4)) { /* Sitecom */
/* TODO */
} else if (!memcmp(((u8 *)the_header) + 14, "Li", 2)) { /* AMIT */
rdc_flash_parts[0].name = "kernel_parthdr";
rdc_flash_parts[0].offset = 0;
rdc_flash_parts[0].size = 0x10;
rdc_flash_parts[1].name = "kernel";
rdc_flash_parts[1].offset = 0x10;
rdc_flash_parts[1].size = 0xffff0;
rdc_flash_parts[2].name = "rootfs_parthdr";
rdc_flash_parts[2].offset = 0x100000;
rdc_flash_parts[2].size = 0x10;
rdc_flash_parts[3].name = "rootfs";
rdc_flash_parts[3].offset = 0x100010;
rdc_flash_parts[3].size = rdc_map_info.size - 0x160010;
rdc_flash_parts[4].name = "config_parthdr";
rdc_flash_parts[4].offset = rdc_map_info.size - 0x60000;
rdc_flash_parts[4].size = 0x10;
rdc_flash_parts[5].name = "config";
rdc_flash_parts[5].offset = rdc_map_info.size - 0x5fff0;
rdc_flash_parts[5].size = 0xfff0;
rdc_flash_parts[6].name = "recoveryfs_parthdr";
rdc_flash_parts[6].offset = rdc_map_info.size - 0x50000;
rdc_flash_parts[6].size = 0x10;
rdc_flash_parts[7].name = "recoveryfs";
rdc_flash_parts[7].offset = rdc_map_info.size - 0x4fff0;
rdc_flash_parts[7].size = 0x3fff0;
rdc_flash_parts[8].name = "recovery_parthdr";
rdc_flash_parts[8].offset = rdc_map_info.size - 0x10000;
rdc_flash_parts[8].size = 0x10;
rdc_flash_parts[9].name = "recovery";
rdc_flash_parts[9].offset = rdc_map_info.size - 0xfff0;
rdc_flash_parts[9].size = 0x7ff0;
rdc_flash_parts[10].name = "productinfo_parthdr";
rdc_flash_parts[10].offset = rdc_map_info.size - 0x8000;
rdc_flash_parts[10].size = 0x10;
rdc_flash_parts[11].name = "productinfo";
rdc_flash_parts[11].offset = rdc_map_info.size - 0x7ff0;
rdc_flash_parts[11].size = 0x1ff0;
rdc_flash_parts[12].name = "bootloader_parthdr";
rdc_flash_parts[12].offset = rdc_map_info.size - 0x6000;
rdc_flash_parts[12].size = 0x10;
rdc_flash_parts[13].name = "bootloader";
rdc_flash_parts[13].offset = rdc_map_info.size - 0x5ff0;
rdc_flash_parts[13].size = 0x5ff0;
rdc_flash_parts[14].name = "everything";
rdc_flash_parts[14].offset = 0;
rdc_flash_parts[14].size = rdc_map_info.size;
rdc_flash_data.nr_parts = 15;
} else { /* ZyXEL */
rdc_flash_parts[0].name = "kernel";
rdc_flash_parts[0].offset = 0;
rdc_flash_parts[0].size = 0x100000;
rdc_flash_parts[1].name = "rootfs";
rdc_flash_parts[1].offset = 0x100000;
rdc_flash_parts[1].size = rdc_map_info.size - 0x140000;
rdc_flash_parts[2].name = "linux";
rdc_flash_parts[2].offset = 0;
rdc_flash_parts[2].size = rdc_map_info.size - 0x40000;
rdc_flash_parts[3].name = "config";
rdc_flash_parts[3].offset = rdc_map_info.size - 0x40000;
rdc_flash_parts[3].size = 0x10000;
rdc_flash_parts[4].name = "productinfo";
rdc_flash_parts[4].offset = rdc_map_info.size - 0x30000;
rdc_flash_parts[4].size = 0x10000;
rdc_flash_parts[5].name = "bootloader";
rdc_flash_parts[5].offset = rdc_map_info.size - 0x20000;
rdc_flash_parts[5].size = 0x20000;
rdc_flash_data.nr_parts = 6;
}
#endif
return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
}
#ifdef CONFIG_MTD_RDC3210
arch_initcall(rdc_board_setup);
#else
late_initcall(rdc_board_setup);
#endif

14
target/linux/rdc/files-2.6.24/arch/i386/mach-rdc/setup.c
View file

@ -1,14 +0,0 @@
/*
* Machine specific setup for generic
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/arch_hooks.h>
#include <asm/io.h>
#include <asm/setup.h>
char * __init machine_specific_memory_setup(void)
{
return "RDC R-321x";
}

272
target/linux/rdc/files-2.6.24/arch/i386/mach-rdc/wdt.c
View file

@ -1,272 +0,0 @@
/*
* RDC321x watchdog driver
*
* Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
*
* This driver is highly inspired from the cpu5_wdt driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/timer.h>
#include <linux/completion.h>
#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/watchdog.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/mach-rdc/rdc321x_defs.h>
#define RDC_WDT_MASK 0x80000000 /* Mask */
#define RDC_WDT_EN 0x00800000 /* Enable bit */
#define RDC_WDT_WTI 0x00200000 /* Generate a CPU reset/NMI/WDT irq when WDT timeout is reached */
#define RDC_WDT_RST 0x00100000 /* Reset bit */
#define RDC_WDT_WIF 0x00040000 /* WDT IRQ Flag */
#define RDC_WDT_IRT 0x00000100 /* IRQ Routing table */
#define RDC_WDT_CNT 0x00000001 /* WDT count */
#define RDC_CLS_TMR 0x80003844 /* Clear timer */
#define RDC_WDT_INTERVAL (HZ/10+1)
int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
static int ticks = 1000;
/* some device data */
static struct {
struct completion stop;
volatile int running;
struct timer_list timer;
volatile int queue;
int default_ticks;
unsigned long inuse;
} rdc321x_wdt_device;
/* generic helper functions */
static void rdc321x_wdt_trigger(unsigned long unused)
{
if( rdc321x_wdt_device.running )
ticks--;
/* keep watchdog alive */
outl(RDC_WDT_EN|inl(RDC3210_CFGREG_DATA), RDC3210_CFGREG_DATA);
/* requeue?? */
if (rdc321x_wdt_device.queue && ticks)
mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
else {
/* ticks doesn't matter anyway */
complete(&rdc321x_wdt_device.stop);
}
}
static void rdc321x_wdt_reset(void)
{
ticks = rdc321x_wdt_device.default_ticks;
}
static void rdc321x_wdt_start(void)
{
if (!rdc321x_wdt_device.queue) {
rdc321x_wdt_device.queue = 1;
/* Clear the timer */
outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
/* Enable watchdog and set the timeout to 81.92 us */
outl(RDC_WDT_EN|RDC_WDT_CNT, RDC3210_CFGREG_DATA);
mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
}
/* if process dies, counter is not decremented */
rdc321x_wdt_device.running++;
}
static int rdc321x_wdt_stop(void)
{
if (rdc321x_wdt_device.running)
rdc321x_wdt_device.running = 0;
ticks = rdc321x_wdt_device.default_ticks;
return -EIO;
}
/* filesystem operations */
static int rdc321x_wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
return -EBUSY;
return nonseekable_open(inode, file);
}
static int rdc321x_wdt_release(struct inode *inode, struct file *file)
{
clear_bit(0, &rdc321x_wdt_device.inuse);
return 0;
}
static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
unsigned int value;
static struct watchdog_info ident =
{
.options = WDIOF_CARDRESET,
.identity = "RDC321x WDT",
};
switch(cmd) {
case WDIOC_KEEPALIVE:
rdc321x_wdt_reset();
break;
case WDIOC_GETSTATUS:
/* Read the value from the DATA register */
value = inl(RDC3210_CFGREG_DATA);
if ( copy_to_user(argp, &value, sizeof(int)) )
return -EFAULT;
break;
case WDIOC_GETSUPPORT:
if ( copy_to_user(argp, &ident, sizeof(ident)) )
return -EFAULT;
break;
case WDIOC_SETOPTIONS:
if ( copy_from_user(&value, argp, sizeof(int)) )
return -EFAULT;
switch(value) {
case WDIOS_ENABLECARD:
rdc321x_wdt_start();
break;
case WDIOS_DISABLECARD:
return rdc321x_wdt_stop();
default:
return -EINVAL;
}
break;
default:
return -ENOTTY;
}
return 0;
}
static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
if ( !count )
return -EIO;
rdc321x_wdt_reset();
return count;
}
static const struct file_operations rdc321x_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.ioctl = rdc321x_wdt_ioctl,
.open = rdc321x_wdt_open,
.write = rdc321x_wdt_write,
.release = rdc321x_wdt_release,
};
static struct miscdevice rdc321x_wdt_misc = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &rdc321x_wdt_fops,
};
static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
{
int err;
if ( (err = misc_register(&rdc321x_wdt_misc)) < 0 ) {
printk(KERN_ERR PFX "misc_register failed\n");
return err;
}
/* Reset the watchdog */
outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
init_completion(&rdc321x_wdt_device.stop);
rdc321x_wdt_device.queue = 0;
clear_bit(0, &rdc321x_wdt_device.inuse);
setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
rdc321x_wdt_device.default_ticks = ticks;
printk(KERN_INFO PFX "init success\n");
return 0;
}
static int rdc321x_wdt_remove(struct platform_device *pdev)
{
if (rdc321x_wdt_device.queue) {
rdc321x_wdt_device.queue = 0;
wait_for_completion(&rdc321x_wdt_device.stop);
}
misc_deregister(&rdc321x_wdt_misc);
return 0;
}
static struct platform_driver rdc321x_wdt_driver = {
.probe = rdc321x_wdt_probe,
.remove = rdc321x_wdt_remove,
.driver = {
.owner = THIS_MODULE,
.name = "rdc321x-wdt",
},
};
static int __init rdc321x_wdt_init(void)
{
return platform_driver_register(&rdc321x_wdt_driver);
}
static void __exit rdc321x_wdt_exit(void)
{
platform_driver_unregister(&rdc321x_wdt_driver);
}
module_init(rdc321x_wdt_init);
module_exit(rdc321x_wdt_exit);
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
MODULE_DESCRIPTION("RDC321x watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);

586
target/linux/rdc/files-2.6.24/arch/x86/boot/compressed/LzmaDecode.c
View file

@ -1,586 +0,0 @@
/*
LzmaDecode.c
LZMA Decoder (optimized for Speed version)
LZMA SDK 4.17 Copyright (c) 1999-2005 Igor Pavlov (2005-04-05)
http://www.7-zip.org/
LZMA SDK is licensed under two licenses:
1) GNU Lesser General Public License (GNU LGPL)
2) Common Public License (CPL)
It means that you can select one of these two licenses and
follow rules of that license.
SPECIAL EXCEPTION:
Igor Pavlov, as the author of this Code, expressly permits you to
statically or dynamically link your Code (or bind by name) to the
interfaces of this file without subjecting your linked Code to the
terms of the CPL or GNU LGPL. Any modifications or additions
to this file, however, are subject to the LGPL or CPL terms.
*/
#include "LzmaDecode.h"
#ifndef Byte
#define Byte unsigned char
#endif
#define kNumTopBits 24
#define kTopValue ((UInt32)1 << kNumTopBits)
#define kNumBitModelTotalBits 11
#define kBitModelTotal (1 << kNumBitModelTotalBits)
#define kNumMoveBits 5
#define RC_READ_BYTE (*Buffer++)
#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
{ int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
#ifdef _LZMA_IN_CB
#define RC_TEST { if (Buffer == BufferLim) \
{ UInt32 size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
#else
#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
#endif
#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
{ UpdateBit0(p); mi <<= 1; A0; } else \
{ UpdateBit1(p); mi = (mi + mi) + 1; A1; }
#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
{ int i = numLevels; res = 1; \
do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
res -= (1 << numLevels); }
#define kNumPosBitsMax 4
#define kNumPosStatesMax (1 << kNumPosBitsMax)
#define kLenNumLowBits 3
#define kLenNumLowSymbols (1 << kLenNumLowBits)
#define kLenNumMidBits 3
#define kLenNumMidSymbols (1 << kLenNumMidBits)
#define kLenNumHighBits 8
#define kLenNumHighSymbols (1 << kLenNumHighBits)
#define LenChoice 0
#define LenChoice2 (LenChoice + 1)
#define LenLow (LenChoice2 + 1)
#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
#define kNumStates 12
#define kNumLitStates 7
#define kStartPosModelIndex 4
#define kEndPosModelIndex 14
#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
#define kNumPosSlotBits 6
#define kNumLenToPosStates 4
#define kNumAlignBits 4
#define kAlignTableSize (1 << kNumAlignBits)
#define kMatchMinLen 2
#define IsMatch 0
#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
#define IsRepG0 (IsRep + kNumStates)
#define IsRepG1 (IsRepG0 + kNumStates)
#define IsRepG2 (IsRepG1 + kNumStates)
#define IsRep0Long (IsRepG2 + kNumStates)
#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
#define LenCoder (Align + kAlignTableSize)
#define RepLenCoder (LenCoder + kNumLenProbs)
#define Literal (RepLenCoder + kNumLenProbs)
#if Literal != LZMA_BASE_SIZE
StopCompilingDueBUG
#endif
#ifdef _LZMA_OUT_READ
typedef struct _LzmaVarState
{
Byte *Buffer;
Byte *BufferLim;
UInt32 Range;
UInt32 Code;
#ifdef _LZMA_IN_CB
ILzmaInCallback *InCallback;
#endif
Byte *Dictionary;
UInt32 DictionarySize;
UInt32 DictionaryPos;
UInt32 GlobalPos;
UInt32 Reps[4];
int lc;
int lp;
int pb;
int State;
int RemainLen;
Byte TempDictionary[4];
} LzmaVarState;
int LzmaDecoderInit(
unsigned char *buffer, UInt32 bufferSize,
int lc, int lp, int pb,
unsigned char *dictionary, UInt32 dictionarySize,
#ifdef _LZMA_IN_CB
ILzmaInCallback *InCallback
#else
unsigned char *inStream, UInt32 inSize
#endif
)
{
Byte *Buffer;
Byte *BufferLim;
UInt32 Range;
UInt32 Code;
LzmaVarState *vs = (LzmaVarState *)buffer;
CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
UInt32 i;
if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
return LZMA_RESULT_NOT_ENOUGH_MEM;
vs->Dictionary = dictionary;
vs->DictionarySize = dictionarySize;
vs->DictionaryPos = 0;
vs->GlobalPos = 0;
vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
vs->lc = lc;
vs->lp = lp;
vs->pb = pb;
vs->State = 0;
vs->RemainLen = 0;
dictionary[dictionarySize - 1] = 0;
for (i = 0; i < numProbs; i++)
p[i] = kBitModelTotal >> 1;
#ifdef _LZMA_IN_CB
RC_INIT;
#else
RC_INIT(inStream, inSize);
#endif
vs->Buffer = Buffer;
vs->BufferLim = BufferLim;
vs->Range = Range;
vs->Code = Code;
#ifdef _LZMA_IN_CB
vs->InCallback = InCallback;
#endif
return LZMA_RESULT_OK;
}
int LzmaDecode(unsigned char *buffer,
unsigned char *outStream, UInt32 outSize,
UInt32 *outSizeProcessed)
{
LzmaVarState *vs = (LzmaVarState *)buffer;
Byte *Buffer = vs->Buffer;
Byte *BufferLim = vs->BufferLim;
UInt32 Range = vs->Range;
UInt32 Code = vs->Code;
#ifdef _LZMA_IN_CB
ILzmaInCallback *InCallback = vs->InCallback;
#endif
CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
int state = vs->State;
Byte previousByte;
UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
UInt32 nowPos = 0;
UInt32 posStateMask = (1 << (vs->pb)) - 1;
UInt32 literalPosMask = (1 << (vs->lp)) - 1;
int lc = vs->lc;
int len = vs->RemainLen;
UInt32 globalPos = vs->GlobalPos;
Byte *dictionary = vs->Dictionary;
UInt32 dictionarySize = vs->DictionarySize;
UInt32 dictionaryPos = vs->DictionaryPos;
Byte tempDictionary[4];
if (dictionarySize == 0)
{
dictionary = tempDictionary;
dictionarySize = 1;
tempDictionary[0] = vs->TempDictionary[0];
}
if (len == -1)
{
*outSizeProcessed = 0;
return LZMA_RESULT_OK;
}
while(len != 0 && nowPos < outSize)
{
UInt32 pos = dictionaryPos - rep0;
if (pos >= dictionarySize)
pos += dictionarySize;
outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
if (++dictionaryPos == dictionarySize)
dictionaryPos = 0;
len--;
}
if (dictionaryPos == 0)
previousByte = dictionary[dictionarySize - 1];
else
previousByte = dictionary[dictionaryPos - 1];
#else
int LzmaDecode(
Byte *buffer, UInt32 bufferSize,
int lc, int lp, int pb,
#ifdef _LZMA_IN_CB
ILzmaInCallback *InCallback,
#else
unsigned char *inStream, UInt32 inSize,
#endif
unsigned char *outStream, UInt32 outSize,
UInt32 *outSizeProcessed)
{
UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
CProb *p = (CProb *)buffer;
UInt32 i;
int state = 0;
Byte previousByte = 0;
UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
UInt32 nowPos = 0;
UInt32 posStateMask = (1 << pb) - 1;
UInt32 literalPosMask = (1 << lp) - 1;
int len = 0;
Byte *Buffer;
Byte *BufferLim;
UInt32 Range;
UInt32 Code;
if (bufferSize < numProbs * sizeof(CProb))
return LZMA_RESULT_NOT_ENOUGH_MEM;
for (i = 0; i < numProbs; i++)
p[i] = kBitModelTotal >> 1;
#ifdef _LZMA_IN_CB
RC_INIT;
#else
RC_INIT(inStream, inSize);
#endif
#endif
*outSizeProcessed = 0;
while(nowPos < outSize)
{
CProb *prob;
UInt32 bound;
int posState = (int)(
(nowPos
#ifdef _LZMA_OUT_READ
+ globalPos
#endif
)
& posStateMask);
prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
IfBit0(prob)
{
int symbol = 1;
UpdateBit0(prob)
prob = p + Literal + (LZMA_LIT_SIZE *
(((
(nowPos
#ifdef _LZMA_OUT_READ
+ globalPos
#endif
)
& literalPosMask) << lc) + (previousByte >> (8 - lc))));
if (state >= kNumLitStates)
{
int matchByte;
#ifdef _LZMA_OUT_READ
UInt32 pos = dictionaryPos - rep0;
if (pos >= dictionarySize)
pos += dictionarySize;
matchByte = dictionary[pos];
#else
matchByte = outStream[nowPos - rep0];
#endif
do
{
int bit;
CProb *probLit;
matchByte <<= 1;
bit = (matchByte & 0x100);
probLit = prob + 0x100 + bit + symbol;
RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
}
while (symbol < 0x100);
}
while (symbol < 0x100)
{
CProb *probLit = prob + symbol;
RC_GET_BIT(probLit, symbol)
}
previousByte = (Byte)symbol;
outStream[nowPos++] = previousByte;
#ifdef _LZMA_OUT_READ
dictionary[dictionaryPos] = previousByte;
if (++dictionaryPos == dictionarySize)
dictionaryPos = 0;
#endif
if (state < 4) state = 0;
else if (state < 10) state -= 3;
else state -= 6;
}
else
{
UpdateBit1(prob);
prob = p + IsRep + state;
IfBit0(prob)
{
UpdateBit0(prob);
rep3 = rep2;
rep2 = rep1;
rep1 = rep0;
state = state < kNumLitStates ? 0 : 3;
prob = p + LenCoder;
}
else
{
UpdateBit1(prob);
prob = p + IsRepG0 + state;
IfBit0(prob)
{
UpdateBit0(prob);
prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
IfBit0(prob)
{
#ifdef _LZMA_OUT_READ
UInt32 pos;
#endif
UpdateBit0(prob);
if (nowPos
#ifdef _LZMA_OUT_READ
+ globalPos
#endif
== 0)
return LZMA_RESULT_DATA_ERROR;
state = state < kNumLitStates ? 9 : 11;
#ifdef _LZMA_OUT_READ
pos = dictionaryPos - rep0;
if (pos >= dictionarySize)
pos += dictionarySize;
previousByte = dictionary[pos];
dictionary[dictionaryPos] = previousByte;
if (++dictionaryPos == dictionarySize)
dictionaryPos = 0;
#else
previousByte = outStream[nowPos - rep0];
#endif
outStream[nowPos++] = previousByte;
continue;
}
else
{
UpdateBit1(prob);
}
}
else
{
UInt32 distance;
UpdateBit1(prob);
prob = p + IsRepG1 + state;
IfBit0(prob)
{
UpdateBit0(prob);
distance = rep1;
}
else
{
UpdateBit1(prob);
prob = p + IsRepG2 + state;
IfBit0(prob)
{
UpdateBit0(prob);
distance = rep2;
}
else
{
UpdateBit1(prob);
distance = rep3;
rep3 = rep2;
}
rep2 = rep1;
}
rep1 = rep0;
rep0 = distance;
}
state = state < kNumLitStates ? 8 : 11;
prob = p + RepLenCoder;
}
{
int numBits, offset;
CProb *probLen = prob + LenChoice;
IfBit0(probLen)
{
UpdateBit0(probLen);
probLen = prob + LenLow + (posState << kLenNumLowBits);
offset = 0;
numBits = kLenNumLowBits;
}
else
{
UpdateBit1(probLen);
probLen = prob + LenChoice2;
IfBit0(probLen)
{
UpdateBit0(probLen);
probLen = prob + LenMid + (posState << kLenNumMidBits);
offset = kLenNumLowSymbols;
numBits = kLenNumMidBits;
}
else
{
UpdateBit1(probLen);
probLen = prob + LenHigh;
offset = kLenNumLowSymbols + kLenNumMidSymbols;
numBits = kLenNumHighBits;
}
}
RangeDecoderBitTreeDecode(probLen, numBits, len);
len += offset;
}
if (state < 4)
{
int posSlot;
state += kNumLitStates;
prob = p + PosSlot +
((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
kNumPosSlotBits);
RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
if (posSlot >= kStartPosModelIndex)
{
int numDirectBits = ((posSlot >> 1) - 1);
rep0 = (2 | ((UInt32)posSlot & 1));
if (posSlot < kEndPosModelIndex)
{
rep0 <<= numDirectBits;
prob = p + SpecPos + rep0 - posSlot - 1;
}
else
{
numDirectBits -= kNumAlignBits;
do
{
RC_NORMALIZE
Range >>= 1;
rep0 <<= 1;
if (Code >= Range)
{
Code -= Range;
rep0 |= 1;
}
}
while (--numDirectBits != 0);
prob = p + Align;
rep0 <<= kNumAlignBits;
numDirectBits = kNumAlignBits;
}
{
int i = 1;
int mi = 1;
do
{
CProb *prob3 = prob + mi;
RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
i <<= 1;
}
while(--numDirectBits != 0);
}
}
else
rep0 = posSlot;
if (++rep0 == (UInt32)(0))
{
/* it's for stream version */
len = -1;
break;
}
}
len += kMatchMinLen;
if (rep0 > nowPos
#ifdef _LZMA_OUT_READ
+ globalPos || rep0 > dictionarySize
#endif
)
return LZMA_RESULT_DATA_ERROR;
do
{
#ifdef _LZMA_OUT_READ
UInt32 pos = dictionaryPos - rep0;
if (pos >= dictionarySize)
pos += dictionarySize;
previousByte = dictionary[pos];
dictionary[dictionaryPos] = previousByte;
if (++dictionaryPos == dictionarySize)
dictionaryPos = 0;
#else
previousByte = outStream[nowPos - rep0];
#endif
len--;
outStream[nowPos++] = previousByte;
}
while(len != 0 && nowPos < outSize);
}
}
RC_NORMALIZE;
#ifdef _LZMA_OUT_READ
vs->Buffer = Buffer;
vs->BufferLim = BufferLim;
vs->Range = Range;
vs->Code = Code;
vs->DictionaryPos = dictionaryPos;
vs->GlobalPos = globalPos + nowPos;
vs->Reps[0] = rep0;
vs->Reps[1] = rep1;
vs->Reps[2] = rep2;
vs->Reps[3] = rep3;
vs->State = state;
vs->RemainLen = len;
vs->TempDictionary[0] = tempDictionary[0];
#endif
*outSizeProcessed = nowPos;
return LZMA_RESULT_OK;
}

100
target/linux/rdc/files-2.6.24/arch/x86/boot/compressed/LzmaDecode.h
View file

@ -1,100 +0,0 @@
/*
LzmaDecode.h
LZMA Decoder interface
LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18)
http://www.7-zip.org/
LZMA SDK is licensed under two licenses:
1) GNU Lesser General Public License (GNU LGPL)
2) Common Public License (CPL)
It means that you can select one of these two licenses and
follow rules of that license.
SPECIAL EXCEPTION:
Igor Pavlov, as the author of this code, expressly permits you to
statically or dynamically link your code (or bind by name) to the
interfaces of this file without subjecting your linked code to the
terms of the CPL or GNU LGPL. Any modifications or additions
to this file, however, are subject to the LGPL or CPL terms.
*/
#ifndef __LZMADECODE_H
#define __LZMADECODE_H
/* #define _LZMA_IN_CB */
/* Use callback for input data */
/* #define _LZMA_OUT_READ */
/* Use read function for output data */
/* #define _LZMA_PROB32 */
/* It can increase speed on some 32-bit CPUs,
but memory usage will be doubled in that case */
/* #define _LZMA_LOC_OPT */
/* Enable local speed optimizations inside code */
#ifndef UInt32
#ifdef _LZMA_UINT32_IS_ULONG
#define UInt32 unsigned long
#else
#define UInt32 unsigned int
#endif
#endif
#ifdef _LZMA_PROB32
#define CProb UInt32
#else
#define CProb unsigned short
#endif
#define LZMA_RESULT_OK 0
#define LZMA_RESULT_DATA_ERROR 1
#define LZMA_RESULT_NOT_ENOUGH_MEM 2
#ifdef _LZMA_IN_CB
typedef struct _ILzmaInCallback
{
int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
} ILzmaInCallback;
#endif
#define LZMA_BASE_SIZE 1846
#define LZMA_LIT_SIZE 768
/*
bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
bufferSize += 100 in case of _LZMA_OUT_READ
by default CProb is unsigned short,
but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
*/
#ifdef _LZMA_OUT_READ
int LzmaDecoderInit(
unsigned char *buffer, UInt32 bufferSize,
int lc, int lp, int pb,
unsigned char *dictionary, UInt32 dictionarySize,
#ifdef _LZMA_IN_CB
ILzmaInCallback *inCallback
#else
unsigned char *inStream, UInt32 inSize
#endif
);
#endif
int LzmaDecode(
unsigned char *buffer,
#ifndef _LZMA_OUT_READ
UInt32 bufferSize,
int lc, int lp, int pb,
#ifdef _LZMA_IN_CB
ILzmaInCallback *inCallback,
#else
unsigned char *inStream, UInt32 inSize,
#endif
#endif
unsigned char *outStream, UInt32 outSize,
UInt32 *outSizeProcessed);
#endif

345
target/linux/rdc/files-2.6.24/arch/x86/boot/compressed/lzma_misc.c
View file

@ -1,345 +0,0 @@
/*
* lzma_misc.c
*
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
* puts by Nick Holloway 1993, better puts by Martin Mares 1995
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*
* Decompress LZMA compressed vmlinuz
* Version 0.9 Copyright (c) Ming-Ching Tiew mctiew@yahoo.com
* Program adapted from misc.c for 2.6 kernel
* Forward ported to latest 2.6 version of misc.c by
* Felix Fietkau <nbd@openwrt.org>
*/
#undef CONFIG_PARAVIRT
#include <linux/linkage.h>
#include <linux/vmalloc.h>
#include <linux/screen_info.h>
#include <linux/console.h>
#include <linux/string.h>
#include <asm/io.h>
#include <asm/page.h>
#include <asm/boot.h>
/* WARNING!!
* This code is compiled with -fPIC and it is relocated dynamically
* at run time, but no relocation processing is performed.
* This means that it is not safe to place pointers in static structures.
*/
/*
* Getting to provable safe in place decompression is hard.
* Worst case behaviours need to be analized.
* Background information:
*
* The file layout is:
* magic[2]
* method[1]
* flags[1]
* timestamp[4]
* extraflags[1]
* os[1]
* compressed data blocks[N]
* crc[4] orig_len[4]
*
* resulting in 18 bytes of non compressed data overhead.
*
* Files divided into blocks
* 1 bit (last block flag)
* 2 bits (block type)
*
* 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
* The smallest block type encoding is always used.
*
* stored:
* 32 bits length in bytes.
*
* fixed:
* magic fixed tree.
* symbols.
*
* dynamic:
* dynamic tree encoding.
* symbols.
*
*
* The buffer for decompression in place is the length of the
* uncompressed data, plus a small amount extra to keep the algorithm safe.
* The compressed data is placed at the end of the buffer. The output
* pointer is placed at the start of the buffer and the input pointer
* is placed where the compressed data starts. Problems will occur
* when the output pointer overruns the input pointer.
*
* The output pointer can only overrun the input pointer if the input
* pointer is moving faster than the output pointer. A condition only
* triggered by data whose compressed form is larger than the uncompressed
* form.
*
* The worst case at the block level is a growth of the compressed data
* of 5 bytes per 32767 bytes.
*
* The worst case internal to a compressed block is very hard to figure.
* The worst case can at least be boundined by having one bit that represents
* 32764 bytes and then all of the rest of the bytes representing the very
* very last byte.
*
* All of which is enough to compute an amount of extra data that is required
* to be safe. To avoid problems at the block level allocating 5 extra bytes
* per 32767 bytes of data is sufficient. To avoind problems internal to a block
* adding an extra 32767 bytes (the worst case uncompressed block size) is
* sufficient, to ensure that in the worst case the decompressed data for
* block will stop the byte before the compressed data for a block begins.
* To avoid problems with the compressed data's meta information an extra 18
* bytes are needed. Leading to the formula:
*
* extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
*
* Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
* Adding 32768 instead of 32767 just makes for round numbers.
* Adding the decompressor_size is necessary as it musht live after all
* of the data as well. Last I measured the decompressor is about 14K.
* 10K of actuall data and 4K of bss.
*
*/
/*
* gzip declarations
*/
#define OF(args) args
#define STATIC static
#undef memcpy
typedef unsigned char uch;
typedef unsigned short ush;
typedef unsigned long ulg;
#define WSIZE 0x80000000 /* Window size must be at least 32k,
* and a power of two
* We don't actually have a window just
* a huge output buffer so I report
* a 2G windows size, as that should
* always be larger than our output buffer.
*/
static uch *inbuf; /* input buffer */
static uch *window; /* Sliding window buffer, (and final output buffer) */
static unsigned insize; /* valid bytes in inbuf */
static unsigned inptr; /* index of next byte to be processed in inbuf */
static unsigned long workspace;
#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond,msg) {if(!(cond)) error(msg);}
# define Trace(x) fprintf x
# define Tracev(x) {if (verbose) fprintf x ;}
# define Tracevv(x) {if (verbose>1) fprintf x ;}
# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
#else
# define Assert(cond,msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
# define Tracec(c,x)
# define Tracecv(c,x)
#endif
static int fill_inbuf(void);
/*
* This is set up by the setup-routine at boot-time
*/
static unsigned char *real_mode; /* Pointer to real-mode data */
extern unsigned char input_data[];
extern int input_len;
static void error(char *x);
static void *memcpy(void *dest, const void *src, unsigned n);
#ifdef CONFIG_X86_NUMAQ
void *xquad_portio;
#endif
static void* memcpy(void* dest, const void* src, unsigned n)
{
int i;
char *d = (char *)dest, *s = (char *)src;
for (i=0;i<n;i++) d[i] = s[i];
return dest;
}
/* ===========================================================================
* Fill the input buffer. This is called only when the buffer is empty
* and at least one byte is really needed.
*/
static int fill_inbuf(void)
{
error("ran out of input data");
return 0;
}
// When using LZMA in callback, the compressed length is not needed.
// Otherwise you need a special version of lzma compression program
// which will pad the compressed length in the header.
#define _LZMA_IN_CB
#include "LzmaDecode.h"
#include "LzmaDecode.c"
static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize);
static int early_serial_base = 0x3f8; /* ttyS0 */
#define XMTRDY 0x20
#define DLAB 0x80
#define TXR 0 /* Transmit register (WRITE) */
#define RXR 0 /* Receive register (READ) */
#define IER 1 /* Interrupt Enable */
#define IIR 2 /* Interrupt ID */
#define FCR 2 /* FIFO control */
#define LCR 3 /* Line control */
#define MCR 4 /* Modem control */
#define LSR 5 /* Line Status */
#define MSR 6 /* Modem Status */
#define DLL 0 /* Divisor Latch Low */
#define DLH 1 /* Divisor latch High */
static int early_serial_putc(unsigned char ch)
{
unsigned timeout = 0xffff;
while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
cpu_relax();
outb(ch, early_serial_base + TXR);
return timeout ? 0 : -1;
}
static void early_serial_write(const char *s, unsigned n)
{
while (*s && n-- > 0) {
if (*s == '\n')
early_serial_putc('\r');
early_serial_putc(*s);
s++;
}
}
#define DEFAULT_BAUD 38400
static __init void early_serial_init(void)
{
unsigned char c;
unsigned divisor;
unsigned baud = DEFAULT_BAUD;
char *e;
outb(0x3, early_serial_base + LCR); /* 8n1 */
outb(0, early_serial_base + IER); /* no interrupt */
outb(0, early_serial_base + FCR); /* no fifo */
outb(0x3, early_serial_base + MCR); /* DTR + RTS */
baud = DEFAULT_BAUD;
divisor = 115200 / baud;
c = inb(early_serial_base + LCR);
outb(c | DLAB, early_serial_base + LCR);
outb(divisor & 0xff, early_serial_base + DLL);
outb((divisor >> 8) & 0xff, early_serial_base + DLH);
outb(c & ~DLAB, early_serial_base + LCR);
}
/*
* Do the lzma decompression
* When using LZMA in callback, the end of input stream is automatically determined
*/
static int lzma_unzip(void)
{
unsigned int i; /* temp value */
unsigned int lc; /* literal context bits */
unsigned int lp; /* literal pos state bits */
unsigned int pb; /* pos state bits */
unsigned int uncompressedSize = 0;
unsigned char* p;
ILzmaInCallback callback;
callback.Read = read_byte;
/* lzma args */
i = get_byte();
lc = i % 9, i = i / 9;
lp = i % 5, pb = i / 5;
/* skip dictionary size */
for (i = 0; i < 4; i++)
get_byte();
// get uncompressedSize
p= (char*)&uncompressedSize;
for (i = 0; i < 4; i++)
*p++ = get_byte();
//get compressedSize
for (i = 0; i < 4; i++)
get_byte();
// point it beyond uncompresedSize
//workspace = window + uncompressedSize;
/* decompress kernel */
if (LzmaDecode((unsigned char*)workspace, ~0, lc, lp, pb, &callback,
(unsigned char*)window, uncompressedSize, &i) == LZMA_RESULT_OK)
return 0;
else
return 1;
}
#ifdef _LZMA_IN_CB
static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
{
static unsigned int i = 0;
static unsigned char val;
*bufferSize = 1;
val = get_byte();
*buffer = &val;
return LZMA_RESULT_OK;
}
#endif
static void error(char *x)
{
while(1); /* Halt */
}
asmlinkage void decompress_kernel(void *rmode, unsigned long end,
uch *input_data, unsigned long input_len, uch *output)
{
real_mode = rmode;
window = output;
inbuf = input_data; /* Input buffer */
insize = input_len;
inptr = 0;
if ((u32)output & (CONFIG_PHYSICAL_ALIGN -1))
error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
if ((workspace = end) > ((-__PAGE_OFFSET-(512 <<20)-1) & 0x7fffffff))
error("Destination address too large");
#ifndef CONFIG_RELOCATABLE
if ((u32)output != LOAD_PHYSICAL_ADDR)
error("Wrong destination address");
#endif
early_serial_init();
early_serial_write("Uncompressing Linux\n", 512);
lzma_unzip();
early_serial_write("Done, booting\n", 512);
return;
}

24
target/linux/rdc/files-2.6.24/arch/x86/kernel/cpu/rdc.c
View file

@ -1,24 +0,0 @@
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/mm.h>
#include <asm/io.h>
#include <asm/processor.h>
#include "cpu.h"
static struct cpu_dev rdc_cpu_dev __cpuinitdata = {
.c_vendor = "RDC",
.c_models = {
{ .vendor = X86_VENDOR_RDC, .family = 4, .model_names =
{
[0] = "R861x(-G)",
}
},
},
};
int __init rdc_init_cpu(void)
{
cpu_devs[X86_VENDOR_RDC] = &rdc_cpu_dev;
return 0;
}

5
target/linux/rdc/files-2.6.24/arch/x86/mach-rdc/Makefile
View file

@ -1,5 +0,0 @@
#
# Makefile for the RDC321x specific parts of the kernel
#
obj-$(CONFIG_X86_RDC) := gpio.o platform.o wdt.o

91
target/linux/rdc/files-2.6.24/arch/x86/mach-rdc/gpio.c
View file

@ -1,91 +0,0 @@
/*
* Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
* RDC321x architecture specific GPIO support
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/autoconf.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <asm/mach-rdc/rdc321x_defs.h>
static inline int rdc_gpio_is_valid(unsigned gpio)
{
return (gpio <= RDC_MAX_GPIO);
}
static unsigned int rdc_gpio_read(unsigned gpio)
{
unsigned int val;
val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48));
outl(val, RDC3210_CFGREG_ADDR);
udelay(10);
val = inl(RDC3210_CFGREG_DATA);
val |= (0x1 << (gpio & 0x1F));
outl(val, RDC3210_CFGREG_DATA);
udelay(10);
val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C));
outl(val, RDC3210_CFGREG_ADDR);
udelay(10);
val = inl(RDC3210_CFGREG_DATA);
return val;
}
static void rdc_gpio_write(unsigned int val)
{
if (val) {
outl(val, RDC3210_CFGREG_DATA);
udelay(10);
}
}
int rdc_gpio_get_value(unsigned gpio)
{
if (rdc_gpio_is_valid(gpio))
return (int)rdc_gpio_read(gpio);
else
return -EINVAL;
}
EXPORT_SYMBOL(rdc_gpio_get_value);
void rdc_gpio_set_value(unsigned gpio, int value)
{
unsigned int val;
if (!rdc_gpio_is_valid(gpio))
return;
val = rdc_gpio_read(gpio);
if (value)
val &= ~(0x1 << (gpio & 0x1F));
else
val |= (0x1 << (gpio & 0x1F));
rdc_gpio_write(val);
}
EXPORT_SYMBOL(rdc_gpio_set_value);
int rdc_gpio_direction_input(unsigned gpio)
{
return 0;
}
EXPORT_SYMBOL(rdc_gpio_direction_input);
int rdc_gpio_direction_output(unsigned gpio, int value)
{
return 0;
}
EXPORT_SYMBOL(rdc_gpio_direction_output);

263
target/linux/rdc/files-2.6.24/arch/x86/mach-rdc/platform.c
View file

@ -1,263 +0,0 @@
/*
*
* Generic RDC321x platform devices
*
* Copyright (C) 2007-2008 OpenWrt.org
* Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
* Copyright (C) 2008 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/version.h>
#include <linux/leds.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/root_dev.h>
#include <asm/gpio.h>
/* Flash */
#ifdef CONFIG_MTD_RDC3210
static struct resource rdc_flash_resource[] = {
[0] = {
.start = (u32)-CONFIG_MTD_RDC3210_SIZE,
.end = (u32)-1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device rdc_flash_device = {
.name = "rdc321x-flash",
.id = -1,
.num_resources = ARRAY_SIZE(rdc_flash_resource),
.resource = rdc_flash_resource,
};
#else
static struct mtd_partition rdc_flash_parts[15];
static struct resource rdc_flash_resource = {
.end = (u32)-1,
.flags = IORESOURCE_MEM,
};
static struct physmap_flash_data rdc_flash_data = {
.parts = rdc_flash_parts,
};
static struct platform_device rdc_flash_device = {
.name = "physmap-flash",
.id = -1,
.resource = &rdc_flash_resource,
.num_resources = 1,
.dev.platform_data = &rdc_flash_data,
};
#endif
/* LEDS */
static struct gpio_led default_leds[] = {
{ .name = "rdc321x:dmz", .gpio = 1, },
};
static struct gpio_led_platform_data rdc321x_led_data = {
.num_leds = ARRAY_SIZE(default_leds),
.leds = default_leds,
};
static struct platform_device rdc321x_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &rdc321x_led_data,
}
};
/* Watchdog */
static struct platform_device rdc321x_wdt = {
.name = "rdc321x-wdt",
.id = -1,
.num_resources = 0,
};
/* Button */
static struct gpio_keys_button rdc321x_gpio_btn[] = {
{
.gpio = 0,
.code = BTN_0,
.desc = "Reset",
.active_low = 1,
}
};
static struct gpio_keys_platform_data rdc321x_gpio_btn_data = {
.buttons = rdc321x_gpio_btn,
.nbuttons = ARRAY_SIZE(rdc321x_gpio_btn),
};
static struct platform_device rdc321x_button = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &rdc321x_gpio_btn_data,
}
};
static struct platform_device *rdc321x_devs[] = {
&rdc_flash_device,
&rdc321x_leds,
&rdc321x_wdt,
&rdc321x_button
};
static int probe_flash_start(struct map_info *the_map)
{
struct mtd_info *res;
the_map->virt = ioremap(the_map->phys, the_map->size);
if (the_map->virt == NULL)
return 1;
for (the_map->bankwidth = 32; the_map->bankwidth; the_map->bankwidth
>>= 1) {
res = do_map_probe("cfi_probe", the_map);
if (res == NULL)
res = do_map_probe("jedec_probe", the_map);
if (res != NULL)
break;
}
iounmap(the_map->virt);
if (res != NULL)
the_map->phys = (u32)-(s32)(the_map->size = res->size);
return res == NULL;
}
static __init int rdc_board_setup(void)
{
#ifndef CONFIG_MTD_RDC3210
struct map_info rdc_map_info;
u32 the_header[4];
ROOT_DEV = 0;
rdc_map_info.name = rdc_flash_device.name;
rdc_map_info.phys = 0xff000000;
rdc_map_info.size = 0x1000000;
rdc_map_info.bankwidth = 2;
rdc_map_info.set_vpp = NULL;
simple_map_init(&rdc_map_info);
while (probe_flash_start(&rdc_map_info)) {
rdc_map_info.phys++;
if (--rdc_map_info.size)
panic("Not to be or to be: That"
" is not the question.");
}
rdc_flash_resource.start = rdc_map_info.phys;
rdc_flash_data.width = rdc_map_info.bankwidth;
rdc_map_info.virt = (u32)ioremap_nocache(rdc_map_info.phys, 0x10);
if (rdc_map_info.virt == NULL)
panic("Something's rotten in Denmark!");
the_header[0] = ((u32 *)rdc_map_info.virt)[0];
the_header[1] = ((u32 *)rdc_map_info.virt)[1];
the_header[2] = ((u32 *)rdc_map_info.virt)[2];
the_header[3] = ((u32 *)rdc_map_info.virt)[3];
iounmap(rdc_map_info.virt);
if (!memcmp(the_header, "GMTK", 4)) { /* Gemtek */
/* TODO */
} else if (!memcmp(the_header, "CSYS", 4)) { /* Sitecom */
/* TODO */
} else if (!memcmp(((u8 *)the_header) + 14, "Li", 2)) { /* AMIT */
rdc_flash_parts[0].name = "kernel_parthdr";
rdc_flash_parts[0].offset = 0;
rdc_flash_parts[0].size = 0x10;
rdc_flash_parts[1].name = "kernel";
rdc_flash_parts[1].offset = 0x10;
rdc_flash_parts[1].size = 0xffff0;
rdc_flash_parts[2].name = "rootfs_parthdr";
rdc_flash_parts[2].offset = 0x100000;
rdc_flash_parts[2].size = 0x10;
rdc_flash_parts[3].name = "rootfs";
rdc_flash_parts[3].offset = 0x100010;
rdc_flash_parts[3].size = rdc_map_info.size - 0x160010;
rdc_flash_parts[4].name = "config_parthdr";
rdc_flash_parts[4].offset = rdc_map_info.size - 0x60000;
rdc_flash_parts[4].size = 0x10;
rdc_flash_parts[5].name = "config";
rdc_flash_parts[5].offset = rdc_map_info.size - 0x5fff0;
rdc_flash_parts[5].size = 0xfff0;
rdc_flash_parts[6].name = "recoveryfs_parthdr";
rdc_flash_parts[6].offset = rdc_map_info.size - 0x50000;
rdc_flash_parts[6].size = 0x10;
rdc_flash_parts[7].name = "recoveryfs";
rdc_flash_parts[7].offset = rdc_map_info.size - 0x4fff0;
rdc_flash_parts[7].size = 0x3fff0;
rdc_flash_parts[8].name = "recovery_parthdr";
rdc_flash_parts[8].offset = rdc_map_info.size - 0x10000;
rdc_flash_parts[8].size = 0x10;
rdc_flash_parts[9].name = "recovery";
rdc_flash_parts[9].offset = rdc_map_info.size - 0xfff0;
rdc_flash_parts[9].size = 0x7ff0;
rdc_flash_parts[10].name = "productinfo_parthdr";
rdc_flash_parts[10].offset = rdc_map_info.size - 0x8000;
rdc_flash_parts[10].size = 0x10;
rdc_flash_parts[11].name = "productinfo";
rdc_flash_parts[11].offset = rdc_map_info.size - 0x7ff0;
rdc_flash_parts[11].size = 0x1ff0;
rdc_flash_parts[12].name = "bootloader_parthdr";
rdc_flash_parts[12].offset = rdc_map_info.size - 0x6000;
rdc_flash_parts[12].size = 0x10;
rdc_flash_parts[13].name = "bootloader";
rdc_flash_parts[13].offset = rdc_map_info.size - 0x5ff0;
rdc_flash_parts[13].size = 0x5ff0;
rdc_flash_parts[14].name = "everything";
rdc_flash_parts[14].offset = 0;
rdc_flash_parts[14].size = rdc_map_info.size;
rdc_flash_data.nr_parts = 15;
} else { /* ZyXEL */
rdc_flash_parts[0].name = "kernel";
rdc_flash_parts[0].offset = 0;
rdc_flash_parts[0].size = 0x100000;
rdc_flash_parts[1].name = "rootfs";
rdc_flash_parts[1].offset = 0x100000;
rdc_flash_parts[1].size = rdc_map_info.size - 0x140000;
rdc_flash_parts[2].name = "linux";
rdc_flash_parts[2].offset = 0;
rdc_flash_parts[2].size = rdc_map_info.size - 0x40000;
rdc_flash_parts[3].name = "config";
rdc_flash_parts[3].offset = rdc_map_info.size - 0x40000;
rdc_flash_parts[3].size = 0x10000;
rdc_flash_parts[4].name = "productinfo";
rdc_flash_parts[4].offset = rdc_map_info.size - 0x30000;
rdc_flash_parts[4].size = 0x10000;
rdc_flash_parts[5].name = "bootloader";
rdc_flash_parts[5].offset = rdc_map_info.size - 0x20000;
rdc_flash_parts[5].size = 0x20000;
rdc_flash_data.nr_parts = 6;
}
#endif
return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
}
#ifdef CONFIG_MTD_RDC3210
arch_initcall(rdc_board_setup);
#else
late_initcall(rdc_board_setup);
#endif

14
target/linux/rdc/files-2.6.24/arch/x86/mach-rdc/setup.c
View file

@ -1,14 +0,0 @@
/*
* Machine specific setup for generic
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/arch_hooks.h>
#include <asm/io.h>
#include <asm/setup.h>
char * __init machine_specific_memory_setup(void)
{
return "RDC R-321x";
}

272
target/linux/rdc/files-2.6.24/arch/x86/mach-rdc/wdt.c
View file

@ -1,272 +0,0 @@
/*
* RDC321x watchdog driver
*
* Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
*
* This driver is highly inspired from the cpu5_wdt driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/timer.h>
#include <linux/completion.h>
#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/watchdog.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/mach-rdc/rdc321x_defs.h>
#define RDC_WDT_MASK 0x80000000 /* Mask */
#define RDC_WDT_EN 0x00800000 /* Enable bit */
#define RDC_WDT_WTI 0x00200000 /* Generate a CPU reset/NMI/WDT irq when WDT timeout is reached */
#define RDC_WDT_RST 0x00100000 /* Reset bit */
#define RDC_WDT_WIF 0x00040000 /* WDT IRQ Flag */
#define RDC_WDT_IRT 0x00000100 /* IRQ Routing table */
#define RDC_WDT_CNT 0x00000001 /* WDT count */
#define RDC_CLS_TMR 0x80003844 /* Clear timer */
#define RDC_WDT_INTERVAL (HZ/10+1)
int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
static int ticks = 1000;
/* some device data */
static struct {
struct completion stop;
volatile int running;
struct timer_list timer;
volatile int queue;
int default_ticks;
unsigned long inuse;
} rdc321x_wdt_device;
/* generic helper functions */
static void rdc321x_wdt_trigger(unsigned long unused)
{
if( rdc321x_wdt_device.running )
ticks--;
/* keep watchdog alive */
outl(RDC_WDT_EN|inl(RDC3210_CFGREG_DATA), RDC3210_CFGREG_DATA);
/* requeue?? */
if (rdc321x_wdt_device.queue && ticks)
mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
else {
/* ticks doesn't matter anyway */
complete(&rdc321x_wdt_device.stop);
}
}
static void rdc321x_wdt_reset(void)
{
ticks = rdc321x_wdt_device.default_ticks;
}
static void rdc321x_wdt_start(void)
{
if (!rdc321x_wdt_device.queue) {
rdc321x_wdt_device.queue = 1;
/* Clear the timer */
outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
/* Enable watchdog and set the timeout to 81.92 us */
outl(RDC_WDT_EN|RDC_WDT_CNT, RDC3210_CFGREG_DATA);
mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
}
/* if process dies, counter is not decremented */
rdc321x_wdt_device.running++;
}
static int rdc321x_wdt_stop(void)
{
if (rdc321x_wdt_device.running)
rdc321x_wdt_device.running = 0;
ticks = rdc321x_wdt_device.default_ticks;
return -EIO;
}
/* filesystem operations */
static int rdc321x_wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
return -EBUSY;
return nonseekable_open(inode, file);
}
static int rdc321x_wdt_release(struct inode *inode, struct file *file)
{
clear_bit(0, &rdc321x_wdt_device.inuse);
return 0;
}
static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
unsigned int value;
static struct watchdog_info ident =
{
.options = WDIOF_CARDRESET,
.identity = "RDC321x WDT",
};
switch(cmd) {
case WDIOC_KEEPALIVE:
rdc321x_wdt_reset();
break;
case WDIOC_GETSTATUS:
/* Read the value from the DATA register */
value = inl(RDC3210_CFGREG_DATA);
if ( copy_to_user(argp, &value, sizeof(int)) )
return -EFAULT;
break;
case WDIOC_GETSUPPORT:
if ( copy_to_user(argp, &ident, sizeof(ident)) )
return -EFAULT;
break;
case WDIOC_SETOPTIONS:
if ( copy_from_user(&value, argp, sizeof(int)) )
return -EFAULT;
switch(value) {
case WDIOS_ENABLECARD:
rdc321x_wdt_start();
break;
case WDIOS_DISABLECARD:
return rdc321x_wdt_stop();
default:
return -EINVAL;
}
break;
default:
return -ENOTTY;
}
return 0;
}
static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
if ( !count )
return -EIO;
rdc321x_wdt_reset();
return count;
}
static const struct file_operations rdc321x_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.ioctl = rdc321x_wdt_ioctl,
.open = rdc321x_wdt_open,
.write = rdc321x_wdt_write,
.release = rdc321x_wdt_release,
};
static struct miscdevice rdc321x_wdt_misc = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &rdc321x_wdt_fops,
};
static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
{
int err;
if ( (err = misc_register(&rdc321x_wdt_misc)) < 0 ) {
printk(KERN_ERR PFX "misc_register failed\n");
return err;
}
/* Reset the watchdog */
outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
init_completion(&rdc321x_wdt_device.stop);
rdc321x_wdt_device.queue = 0;
clear_bit(0, &rdc321x_wdt_device.inuse);
setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
rdc321x_wdt_device.default_ticks = ticks;
printk(KERN_INFO PFX "init success\n");
return 0;
}
static int rdc321x_wdt_remove(struct platform_device *pdev)
{
if (rdc321x_wdt_device.queue) {
rdc321x_wdt_device.queue = 0;
wait_for_completion(&rdc321x_wdt_device.stop);
}
misc_deregister(&rdc321x_wdt_misc);
return 0;
}
static struct platform_driver rdc321x_wdt_driver = {
.probe = rdc321x_wdt_probe,
.remove = rdc321x_wdt_remove,
.driver = {
.owner = THIS_MODULE,
.name = "rdc321x-wdt",
},
};
static int __init rdc321x_wdt_init(void)
{
return platform_driver_register(&rdc321x_wdt_driver);
}
static void __exit rdc321x_wdt_exit(void)
{
platform_driver_unregister(&rdc321x_wdt_driver);
}
module_init(rdc321x_wdt_init);
module_exit(rdc321x_wdt_exit);
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
MODULE_DESCRIPTION("RDC321x watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);

25
target/linux/rdc/files-2.6.24/drivers/mtd/maps/imghdr.h
View file

@ -1,25 +0,0 @@
#ifndef GT_IMGHDR_H
#define GT_IMGHDR_H
#define GTIMG_MAGIC "GMTK"
/* Product ID */
#define PID_RTL_AIRGO 1
#define PID_RTL_RALINK 2
#define PID_RDC_AIRGO 3
#define PID_RDC_RALINK 5 /* White Lable */
/* Gemtek */
typedef struct
{
u8 magic[4]; /* ASICII: GMTK */
u32 checksum; /* CRC32 */
u32 version; /* x.x.x.x */
u32 kernelsz; /* The size of the kernel image */
u32 imagesz; /* The length of this image file ( kernel + romfs + this header) */
u32 pid; /* Product ID */
u32 fastcksum; /* Partial CRC32 on (First(256), medium(256), last(512)) */
u32 reserved;
}gt_imghdr_t;
#endif

392
target/linux/rdc/files-2.6.24/drivers/mtd/maps/rdc3210.c
View file

@ -1,392 +0,0 @@
/*******************************************************************
* Simple Flash mapping for RDC3210 *
* *
* 2005.03.23 *
* Dante Su (dante_su@gemtek.com.tw) *
* Copyright (C) 2005 Gemtek Corporation *
*******************************************************************/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/autoconf.h>
#include <linux/sched.h>
#include <linux/squashfs_fs.h>
static struct mtd_info *rdc3210_mtd;
struct map_info rdc3210_map =
{
.name = "RDC3210 Flash",
.size = CONFIG_MTD_RDC3210_SIZE,
.bankwidth = CONFIG_MTD_RDC3210_BUSWIDTH,
};
/* Dante: This is the default static mapping, however this is nothing but a hint. (Say dynamic mapping) */
static struct mtd_partition rdc3210_parts[] =
{
#if CONFIG_MTD_RDC3210_SIZE == 0x400000
{ name: "linux", offset: 0, size: 0x003C0000 }, /* 3840 KB = (Kernel + ROMFS) = (768 KB + 3072 KB) */
{ name: "romfs", offset: 0x000C0000, size: 0x00300000 }, /* 3072 KB */
{ name: "nvram", offset: 0x003C0000, size: 0x00010000 }, /* 64 KB */
#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
{ name: "factory", offset: 0x003D0000, size: 0x00010000 }, /* 64 KB */
#endif
{ name: "bootldr", offset: 0x003E0000, size: 0x00020000 }, /* 128 KB */
#elif CONFIG_MTD_RDC3210_SIZE == 0x200000
{ name: "linux", offset: 0x00008000, size: 0x001E8000 },
{ name: "romfs", offset: 0x000C8000, size: 0x00128000 },
{ name: "nvram", offset: 0x00000000, size: 0x00008000 }, /* 64 KB */
#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
#error Unsupported configuration!
#endif
{ name: "bootldr", offset: 0x001F0000, size: 0x00010000 },
#elif CONFIG_MTD_RDC3210_SIZE == 0x800000
{ name: "linux", offset: 0, size: 0x001F0000 }, /* 1984 KB */
{ name: "config", offset: 0x001F0000, size: 0x00010000 }, /* 64 KB */
{ name: "romfs", offset: 0x00200000, size: 0x005D0000 }, /* 5952 KB */
#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
{ name: "factory", offset: 0x007D0000, size: 0x00010000 }, /* 64 KB */
#endif
{ name: "bootldr", offset: 0x007E0000, size: 0x00010000 }, /* 64 KB */
#else
#error Unsupported configuration!
#endif
};
static __u32 crctab[257] = {
0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d,
0
};
static __u32 crc32(__u8 * buf, __u32 len)
{
register int i;
__u32 sum;
register __u32 s0;
s0 = ~0;
for (i = 0; i < len; i++) {
s0 = (s0 >> 8) ^ crctab[(__u8) (s0 & 0xFF) ^ buf[i]];
}
sum = ~s0;
return sum;
}
static void erase_callback(struct erase_info *done)
{
wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
wake_up(wait_q);
}
static int erase_write (struct mtd_info *mtd, unsigned long pos,
int len, const char *buf)
{
struct erase_info erase;
DECLARE_WAITQUEUE(wait, current);
wait_queue_head_t wait_q;
size_t retlen;
int ret;
/*
* First, let's erase the flash block.
*/
init_waitqueue_head(&wait_q);
erase.mtd = mtd;
erase.callback = erase_callback;
erase.addr = pos;
erase.len = len;
erase.priv = (u_long)&wait_q;
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&wait_q, &wait);
ret = mtd->erase(mtd, &erase);
if (ret) {
set_current_state(TASK_RUNNING);
remove_wait_queue(&wait_q, &wait);
printk (KERN_WARNING "erase of region [0x%lx, 0x%x] "
"on \"%s\" failed\n",
pos, len, mtd->name);
return ret;
}
schedule(); /* Wait for erase to finish. */
remove_wait_queue(&wait_q, &wait);
/*
* Next, writhe data to flash.
*/
ret = mtd->write (mtd, pos, len, &retlen, buf);
if (ret)
return ret;
if (retlen != len)
return -EIO;
return 0;
}
static int __init init_rdc3210_map(void)
{
rdc3210_map.phys = -rdc3210_map.size;
printk(KERN_NOTICE "flash device: %x at %x\n", rdc3210_map.size, rdc3210_map.phys);
#if CONFIG_MTD_RDC3210_SIZE == 0x800000
simple_map_init(&rdc3210_map);
#endif
rdc3210_map.map_priv_1 = (unsigned long)(rdc3210_map.virt = ioremap_nocache(rdc3210_map.phys, rdc3210_map.size));
if (!rdc3210_map.map_priv_1)
{
printk("Failed to ioremap\n");
return -EIO;
}
rdc3210_mtd = do_map_probe("cfi_probe", &rdc3210_map);
#ifdef CONFIG_MTD_RDC3210_STATIC_MAP /* Dante: This is for fixed map */
if (rdc3210_mtd)
{
rdc3210_mtd->owner = THIS_MODULE;
add_mtd_partitions(rdc3210_mtd, rdc3210_parts, sizeof(rdc3210_parts)/sizeof(rdc3210_parts[0]));
return 0;
}
#else /* Dante: This is for dynamic mapping */
#include "imghdr.h"
typedef struct {
u8 magic[4];
u32 kernelsz, ramdisksz;
u8 magic2[4];
u32 sz2;
}sc_imghdr_t;
if (rdc3210_mtd)
{ // Dante
sc_imghdr_t *hdr2= (sc_imghdr_t *)(rdc3210_map.map_priv_1);
gt_imghdr_t *hdr = (gt_imghdr_t *)hdr2
#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
, *ptmp
#endif
;
int len, tmp, tmp2, tmp3, tmp4, hdr_type = 0;
if(!memcmp(hdr->magic, GTIMG_MAGIC, 4))
{
hdr_type = 1;
tmp = hdr->kernelsz + sizeof(gt_imghdr_t);
tmp2 = rdc3210_mtd->erasesize;
tmp3 = ((tmp / 32) + ((tmp % 32) ? 1 : 0)) * 32;
tmp4 = ((tmp / tmp2) + ((tmp % tmp2) ? 1 : 0)) * tmp2;
}
#ifndef CONFIG_MTD_RDC3210_ALLOW_JFFS2
else if (!memcmp(hdr2->magic, "CSYS", 4))
{
hdr_type = 2;
tmp = hdr2->ramdisksz + hdr2->kernelsz + sizeof(sc_imghdr_t);
tmp2 = rdc3210_mtd->erasesize;
tmp3 = ((tmp / 32) + ((tmp % 32) ? 1 : 0)) * 32;
tmp4 = ((tmp / tmp2) + ((tmp % tmp2) ? 1 : 0)) * tmp2;
}
#endif
else
{
iounmap((void *)rdc3210_map.map_priv_1);
rdc3210_map.map_priv_1 = 0L;
rdc3210_map.virt = NULL;
printk("Invalid MAGIC for Firmware Image!!!\n");
return -EIO;
}
#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
tmp = (tmp3 == tmp4) ? tmp4 + tmp2 : tmp4;
if ((ptmp = (gt_imghdr_t *)vmalloc(tmp)) == NULL)
{
iounmap((void *)rdc3210_map.map_priv_1);
rdc3210_map.map_priv_1 = 0L;
rdc3210_map.virt = NULL;
printk("Can't allocate 0x%08x for flash-reading buffer!\n", tmp);
return -ENOMEM;
}
if (rdc3210_mtd->read(rdc3210_mtd, 0, tmp, &len, (__u8 *)ptmp) || len != tmp)
{
vfree(ptmp);
iounmap((void *)rdc3210_map.map_priv_1);
rdc3210_map.map_priv_1 = 0L;
rdc3210_map.virt = NULL;
printk("Can't read that much flash! Read 0x%08x of it.\n", len);
return -EIO;
}
#endif
#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
/* 1. Adjust Redboot */
tmp = rdc3210_mtd->size - rdc3210_parts[4].size;
rdc3210_parts[4].offset = tmp - (tmp % tmp2);
rdc3210_parts[4].size = rdc3210_mtd->size - rdc3210_parts[4].offset;
/* 2. Adjust Factory Default */
tmp -= rdc3210_parts[3].size;
rdc3210_parts[3].offset = tmp - (tmp % tmp2);
rdc3210_parts[3].size = rdc3210_parts[4].offset - rdc3210_parts[3].offset;
#else
/* 1. Adjust Redboot */
tmp = rdc3210_mtd->size - rdc3210_parts[3].size;
rdc3210_parts[3].offset = tmp - (tmp % tmp2);
rdc3210_parts[3].size = rdc3210_mtd->size - rdc3210_parts[3].offset;
#endif
if (hdr_type == 1) {
/* 3. Adjust NVRAM */
#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
if (*(__u32 *)(((unsigned char *)ptmp)+tmp3) == SQUASHFS_MAGIC)
{
len = 1;
tmp4 = tmp3;
tmp = hdr->imagesz;
rdc3210_parts[2].name = "rootfs_data";
rdc3210_parts[2].offset = rdc3210_parts[0].offset + (((tmp / tmp2) + ((tmp % tmp2) ? 1 : 0)) * tmp2);
}
else
#else
tmp4 = tmp3;
#endif
{
len = 0;
tmp -= rdc3210_parts[2].size;
rdc3210_parts[2].offset = tmp - (tmp % tmp2);
}
rdc3210_parts[2].size = rdc3210_parts[3].offset - rdc3210_parts[2].offset;
}
else if (hdr_type == 2)
{
len = 0;
tmp4 = tmp3;
}
/* 4. Adjust Linux (Kernel + ROMFS) */
rdc3210_parts[0].size = rdc3210_parts[len + hdr_type + 1].offset - rdc3210_parts[0].offset;
/* 5. Adjust ROMFS */
rdc3210_parts[1].offset = rdc3210_parts[0].offset + tmp4;
rdc3210_parts[1].size = rdc3210_parts[hdr_type + 1].offset - rdc3210_parts[1].offset;
#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
if (!(hdr->reserved || len))
{
__u8 buf[1024];
ptmp->reserved = hdr->imagesz;
ptmp->imagesz = tmp4;
ptmp->checksum = ptmp->fastcksum = 0;
memcpy(buf, ptmp, 0x100);
memcpy(buf + 0x100, ((__u8 *)ptmp) + ((tmp4 >> 1) - ((tmp4 & 0x6) >> 1)), 0x100);
memcpy(buf + 0x200, ((__u8 *)ptmp) + (tmp4 - 0x200), 0x200);
ptmp->fastcksum = crc32(buf, sizeof(buf));
ptmp->checksum = crc32((__u8 *)ptmp, tmp4);
if (rdc3210_mtd->unlock) rdc3210_mtd->unlock(rdc3210_mtd, 0, tmp2);
if ((len = erase_write(rdc3210_mtd, 0, tmp2, (char *)ptmp)))
{
vfree(ptmp);
iounmap((void *)rdc3210_map.map_priv_1);
rdc3210_map.map_priv_1 = 0L;
rdc3210_map.virt = NULL;
printk("Couldn't erase! Got %d.\n", len);
return len;
}
if (rdc3210_mtd->sync) rdc3210_mtd->sync(rdc3210_mtd);
}
vfree(ptmp);
#endif
rdc3210_mtd->owner = THIS_MODULE;
add_mtd_partitions(rdc3210_mtd, rdc3210_parts, sizeof(rdc3210_parts)/sizeof(rdc3210_parts[0]));
return 0;
}
#endif
iounmap((void *)rdc3210_map.map_priv_1);
rdc3210_map.map_priv_1 = 0L;
rdc3210_map.virt = NULL;
return -ENXIO;
}
static void __exit cleanup_rdc3210_map(void)
{
if (rdc3210_mtd)
{
del_mtd_partitions(rdc3210_mtd);
map_destroy(rdc3210_mtd);
}
if (rdc3210_map.map_priv_1)
{
iounmap((void *)rdc3210_map.map_priv_1);
rdc3210_map.map_priv_1 = 0L;
rdc3210_map.virt = NULL;
}
}
module_init(init_rdc3210_map);
module_exit(cleanup_rdc3210_map);

1412
target/linux/rdc/files-2.6.24/drivers/net/r6040.c
View file

File diff suppressed because it is too large Load diff

6
target/linux/rdc/files-2.6.24/include/asm-i386/gpio.h
View file

@ -1,6 +0,0 @@
#ifndef _ASM_I386_GPIO_H
#define _ASM_I386_GPIO_H
#include <gpio.h>
#endif /* _ASM_I386_GPIO_H */

15
target/linux/rdc/files-2.6.24/include/asm-i386/mach-generic/gpio.h
View file

@ -1,15 +0,0 @@
#ifndef __ASM_MACH_GENERIC_GPIO_H
#define __ASM_MACH_GENERIC_GPIO_H
int gpio_request(unsigned gpio, const char *label);
void gpio_free(unsigned gpio);
int gpio_direction_input(unsigned gpio);
int gpio_direction_output(unsigned gpio, int value);
int gpio_get_value(unsigned gpio);
void gpio_set_value(unsigned gpio, int value);
int gpio_to_irq(unsigned gpio);
int irq_to_gpio(unsigned irq);
#include <asm-generic/gpio.h> /* cansleep wrappers */
#endif /* __ASM_MACH_GENERIC_GPIO_H */

56
target/linux/rdc/files-2.6.24/include/asm-i386/mach-rdc/gpio.h
View file

@ -1,56 +0,0 @@
#ifndef _RDC_GPIO_H
#define _RDC_GPIO_H
extern int rdc_gpio_get_value(unsigned gpio);
extern void rdc_gpio_set_value(unsigned gpio, int value);
extern int rdc_gpio_direction_input(unsigned gpio);
extern int rdc_gpio_direction_output(unsigned gpio, int value);
/* Wrappers for the arch-neutral GPIO API */
static inline int gpio_request(unsigned gpio, const char *label)
{
/* Not yet implemented */
return 0;
}
static inline void gpio_free(unsigned gpio)
{
/* Not yet implemented */
}
static inline int gpio_direction_input(unsigned gpio)
{
return rdc_gpio_direction_input(gpio);
}
static inline int gpio_direction_output(unsigned gpio, int value)
{
return rdc_gpio_direction_output(gpio, value);
}
static inline int gpio_get_value(unsigned gpio)
{
return rdc_gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned gpio, int value)
{
rdc_gpio_set_value(gpio, value);
}
static inline int gpio_to_irq(unsigned gpio)
{
return gpio;
}
static inline int irq_to_gpio(unsigned irq)
{
return irq;
}
/* For cansleep */
#include <asm-generic/gpio.h>
#endif /* _RDC_GPIO_H_ */

6
target/linux/rdc/files-2.6.24/include/asm-i386/mach-rdc/rdc321x_defs.h
View file

@ -1,6 +0,0 @@
#define PFX "rdc321x: "
/* General purpose configuration and data registers */
#define RDC3210_CFGREG_ADDR 0x0CF8
#define RDC3210_CFGREG_DATA 0x0CFC
#define RDC_MAX_GPIO 0x3A

6
target/linux/rdc/files-2.6.24/include/asm-x86/gpio.h
View file

@ -1,6 +0,0 @@
#ifndef _ASM_I386_GPIO_H
#define _ASM_I386_GPIO_H
#include <gpio.h>
#endif /* _ASM_I386_GPIO_H */

15
target/linux/rdc/files-2.6.24/include/asm-x86/mach-generic/gpio.h
View file

@ -1,15 +0,0 @@
#ifndef __ASM_MACH_GENERIC_GPIO_H
#define __ASM_MACH_GENERIC_GPIO_H
int gpio_request(unsigned gpio, const char *label);
void gpio_free(unsigned gpio);
int gpio_direction_input(unsigned gpio);
int gpio_direction_output(unsigned gpio, int value);
int gpio_get_value(unsigned gpio);
void gpio_set_value(unsigned gpio, int value);
int gpio_to_irq(unsigned gpio);
int irq_to_gpio(unsigned irq);
#include <asm-generic/gpio.h> /* cansleep wrappers */
#endif /* __ASM_MACH_GENERIC_GPIO_H */

56
target/linux/rdc/files-2.6.24/include/asm-x86/mach-rdc/gpio.h
View file

@ -1,56 +0,0 @@
#ifndef _RDC_GPIO_H
#define _RDC_GPIO_H
extern int rdc_gpio_get_value(unsigned gpio);
extern void rdc_gpio_set_value(unsigned gpio, int value);
extern int rdc_gpio_direction_input(unsigned gpio);
extern int rdc_gpio_direction_output(unsigned gpio, int value);
/* Wrappers for the arch-neutral GPIO API */
static inline int gpio_request(unsigned gpio, const char *label)
{
/* Not yet implemented */
return 0;
}
static inline void gpio_free(unsigned gpio)
{
/* Not yet implemented */
}
static inline int gpio_direction_input(unsigned gpio)
{
return rdc_gpio_direction_input(gpio);
}
static inline int gpio_direction_output(unsigned gpio, int value)
{
return rdc_gpio_direction_output(gpio, value);
}
static inline int gpio_get_value(unsigned gpio)
{
return rdc_gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned gpio, int value)
{
rdc_gpio_set_value(gpio, value);
}
static inline int gpio_to_irq(unsigned gpio)
{
return gpio;
}
static inline int irq_to_gpio(unsigned irq)
{
return irq;
}
/* For cansleep */
#include <asm-generic/gpio.h>
#endif /* _RDC_GPIO_H_ */

6
target/linux/rdc/files-2.6.24/include/asm-x86/mach-rdc/rdc321x_defs.h
View file

@ -1,6 +0,0 @@
#define PFX "rdc321x: "
/* General purpose configuration and data registers */
#define RDC3210_CFGREG_ADDR 0x0CF8
#define RDC3210_CFGREG_DATA 0x0CFC
#define RDC_MAX_GPIO 0x3A

63
target/linux/rdc/patches-2.6.24/001-rdc3210_flash_map.patch
View file

@ -1,63 +0,0 @@
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -117,6 +117,50 @@ config MTD_PNC2000
PNC-2000 is the name of Network Camera product from PHOTRON
Ltd. in Japan. It uses CFI-compliant flash.
+config MTD_RDC3210
+ tristate "CFI Flash device mapped on RDC3210"
+ depends on X86 && MTD_CFI && MTD_PARTITIONS
+ help
+ RDC-3210 is the flash device we find on Ralink reference board.
+
+config MTD_RDC3210_STATIC_MAP
+ bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
+ select MTD_RDC3210_FACTORY_PRESENT
+ help
+ The mapping driver will use the static partition map for the
+ RDC-3210 flash device.
+
+config MTD_RDC3210_FACTORY_PRESENT
+ bool "Reserve a partition on RDC3210 for factory presets"
+ depends on MTD_RDC3210
+ default y
+ help
+ The mapping driver will reserve a partition on the RDC-3210 flash
+ device for resetting flash contents to factory defaults.
+
+config MTD_RDC3210_ALLOW_JFFS2
+ bool "JFFS2 filesystem usable in a partition on RDC3210"
+ depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
+ help
+ The mapping driver will align a partition on the RDC-3210 flash
+ device to an erase-block boundary so that a JFFS2 filesystem may
+ reside on it.
+
+config MTD_RDC3210_SIZE
+ hex "Amount of flash memory on RDC3210"
+ depends on MTD_RDC3210
+ default "0x400000"
+ help
+ Total size in bytes of the RDC-3210 flash device
+
+config MTD_RDC3210_BUSWIDTH
+ int "Width of CFI Flash device mapped on RDC3210"
+ depends on MTD_RDC3210
+ default "2"
+ help
+ Number of bytes addressed on the RDC-3210 flash device before
+ addressing the same chip again
+
config MTD_SC520CDP
tristate "CFI Flash device mapped on AMD SC520 CDP"
depends on X86 && MTD_CFI && MTD_CONCAT
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcms
obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o
obj-$(CONFIG_MTD_PNC2000) += pnc2000.o
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
+obj-$(CONFIG_MTD_RDC3210) += rdc3210.o
obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o

13
target/linux/rdc/patches-2.6.24/001-x86_generic_gpio.patch
View file

@ -1,13 +0,0 @@
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -81,6 +81,10 @@ config GENERIC_BUG
default y
depends on BUG
+config GENERIC_GPIO
+ bool
+ default n
+
config GENERIC_HWEIGHT
bool
default y

37
target/linux/rdc/patches-2.6.24/002-r6040_ethernet.patch
View file

@ -1,37 +0,0 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1449,6 +1449,24 @@ config APRICOT
To compile this driver as a module, choose M here. The module
will be called apricot.
+config R6040
+ tristate "RDC Fast-Ethernet support (EXPERIMENTAL)"
+ depends on NET_PCI && EXPERIMENTAL
+ select MII
+ help
+ If you have a network (Ethernet) controller of this type, say Y and
+ read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called r6040.
+
+
+config R6040_NAPI
+ bool "NAPI support for R6040"
+ depends on R6040
+ default y
config B44
tristate "Broadcom 440x/47xx ethernet support"
depends on SSB_POSSIBLE
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -116,6 +116,7 @@ obj-$(CONFIG_LNE390) += lne390.o 8390.o
obj-$(CONFIG_NE3210) += ne3210.o 8390.o
obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
obj-$(CONFIG_B44) += b44.o
+obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
obj-$(CONFIG_NE_H8300) += ne-h8300.o
obj-$(CONFIG_AX88796) += ax88796.o

11
target/linux/rdc/patches-2.6.24/003-rootfstype.patch
View file

@ -1,11 +0,0 @@
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -256,6 +256,8 @@ static void __init get_fs_names(char *pa
{
char *s = page;
+ if (!root_fs_names)
+ root_fs_names = "squashfs,jffs2";
if (root_fs_names) {
strcpy(page, root_fs_names);
while (*s++) {

73
target/linux/rdc/patches-2.6.24/004-rdc_fixes.patch
View file

@ -1,73 +0,0 @@
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -304,6 +304,17 @@ config X86_VSMP
supposed to run on these EM64T-based machines. Only choose this option
if you have one of these machines.
+config X86_RDC
+ bool "Support for RDC 3211 boards"
+ select GENERIC_GPIO
+ select LEDS_GPIO
+ select LEDS_CLASS
+ help
+ Support for RDC 3211 systems. Say 'Y' here if the kernel is
+ supposed to run on an IA-32 RDC R3211 system.
+ Only choose this option if you have such as system, otherwise you
+ should say N here.
+
endchoice
config SCHED_NO_NO_OMIT_FRAME_POINTER
--- a/arch/x86/kernel/reboot_fixups_32.c
+++ b/arch/x86/kernel/reboot_fixups_32.c
@@ -30,6 +30,17 @@ static void cs5536_warm_reset(struct pci
udelay(50); /* shouldn't get here but be safe and spin a while */
}
+static void r8610_reset(struct pci_dev *dev)
+{
+ int i;
+
+ outl(0x80003840,0xCF8);
+ i=inl(0xCFC);
+ i |= 0x1600;
+ outl(i,0xCFC);
+ outb(1,0x92);
+}
+
struct device_fixup {
unsigned int vendor;
unsigned int device;
@@ -40,6 +51,7 @@ static struct device_fixup fixups_table[
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
+{ PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030, r8610_reset },
};
/*
--- a/arch/x86/Makefile_32
+++ b/arch/x86/Makefile_32
@@ -99,6 +99,11 @@ mflags-$(CONFIG_X86_ES7000) := -Iinclude
mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default
core-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/
+# RDC subarch support
+mflags-$(CONFIG_X86_RDC) := -Iinclude/asm-x86/mach-rdc
+mcore-$(CONFIG_X86_RDC) := arch/x86/mach-default
+core-$(CONFIG_X86_RDC) += arch/x86/mach-rdc/
+
# Xen paravirtualization support
core-$(CONFIG_XEN) += arch/x86/xen/
--- a/include/asm-x86/timex.h
+++ b/include/asm-x86/timex.h
@@ -7,6 +7,8 @@
#ifdef CONFIG_X86_ELAN
# define PIT_TICK_RATE 1189200 /* AMD Elan has different frequency! */
+#elif defined(CONFIG_X86_RDC)
+# define PIT_TICK_RATE 1041667 /* Underlying HZ for R8610 */
#else
# define PIT_TICK_RATE 1193182 /* Underlying HZ */
#endif

20
target/linux/rdc/patches-2.6.24/004-yenta_mystery.patch
View file

@ -1,20 +0,0 @@
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1171,6 +1171,17 @@ static int __devinit yenta_probe (struct
/* We must finish initialization here */
+#ifdef CONFIG_X86_RDC
+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
+#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
+
+ config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
+ config_writel(socket, 35*4, 0x00000022);
+ config_writel(socket, 36*4, 0x60200000);
+ config_writel(socket, 40*4, 0x7e020000);
+#endif
+
if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
/* No IRQ or request_irq failed. Poll */
socket->cb_irq = 0; /* But zero is a valid IRQ number. */

10
target/linux/rdc/patches-2.6.24/005-cmdline_setup.patch
View file

@ -1,10 +0,0 @@
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -609,6 +609,7 @@ void __init setup_arch(char **cmdline_p)
print_memory_map("user");
}
+ strcat(boot_command_line, " init=/etc/preinit console=ttyS0,38400");
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;

40
target/linux/rdc/patches-2.6.24/005-fix_amit_breakage.patch
View file

@ -1,40 +0,0 @@
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -60,7 +60,7 @@ static inline void outl(u32 v, u16 port)
{
asm volatile("outl %0,%1" : : "a" (v), "dN" (port));
}
-static inline u32 inl(u32 port)
+static inline u32 inl(u16 port)
{
u32 v;
asm volatile("inl %1,%0" : "=a" (v) : "dN" (port));
--- a/arch/x86/boot/pm.c
+++ b/arch/x86/boot/pm.c
@@ -16,6 +16,9 @@
#include "boot.h"
#include <asm/segment.h>
+#ifdef CONFIG_X86_RDC
+#include <asm/mach-rdc/rdc321x_defs.h>
+#endif
/*
* Invoke the realmode switch hook if present; otherwise
@@ -160,6 +163,16 @@ void go_to_protected_mode(void)
die();
}
+#ifdef CONFIG_X86_RDC
+ {
+ u32 bootctl;
+
+ outl(0x80003840, RDC3210_CFGREG_ADDR);
+ bootctl = inl(RDC3210_CFGREG_DATA) | 0x07ff0000;
+ outl(bootctl, RDC3210_CFGREG_DATA);
+ }
+#endif
+
/* Reset coprocessor (IGNNE#) */
reset_coprocessor();

16
target/linux/rdc/patches-2.6.24/006-pci_ids.patch
View file

@ -1,16 +0,0 @@
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2106,6 +2106,13 @@
#define PCI_DEVICE_ID_HERC_WIN 0x5732
#define PCI_DEVICE_ID_HERC_UNI 0x5832
+#define PCI_VENDOR_ID_RDC 0x17f3
+#define PCI_DEVICE_ID_RDC_R6020 0x6020
+#define PCI_DEVICE_ID_RDC_R6030 0x6030
+#define PCI_DEVICE_ID_RDC_R6040 0x6040
+#define PCI_DEVICE_ID_RDC_R6060 0x6060
+#define PCI_DEVICE_ID_RDC_R6061 0x6061
+
#define PCI_VENDOR_ID_SITECOM 0x182d
#define PCI_DEVICE_ID_SITECOM_DC105V2 0x3069

62
target/linux/rdc/patches-2.6.24/600-x86_lzma.patch
View file

@ -1,62 +0,0 @@
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -166,4 +166,9 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS)
quiet_cmd_gzip = GZIP $@
cmd_gzip = gzip -f -9 < $< > $@
-
+# LZMA
+#
+quiet_cmd_lzma = LZMA $@
+cmd_lzma = bash -e scripts/lzma_kern $< $@ -lc7 -lp0 -pb0
+# to use lzmacomp,
+# cmd_lzma = lzmacomp $< 700 > $@
--- /dev/null
+++ b/scripts/lzma_kern
@@ -0,0 +1,4 @@
+get-size() { echo "$5" ;}
+printf -v len '%.8x' "$(get-size $(ls -l "$1"))"
+lzma e "$@"
+echo -ne "\x$(echo $len | cut -c 7,8)\x$(echo $len | cut -c 5,6)\x$(echo $len | cut -c 3,4)\x$(echo $len | cut -c 1,2)" >> "$2"
--- a/arch/x86/boot/compressed/Makefile_32
+++ b/arch/x86/boot/compressed/Makefile_32
@@ -4,8 +4,8 @@
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head_32.o misc_32.o piggy.o \
- vmlinux.bin.all vmlinux.relocs
+targets := vmlinux vmlinux.bin vmlinux.bin.lzma head_32.o piggy.o \
+ vmlinux.bin.all vmlinux.relocs lzma_misc.o
EXTRA_AFLAGS := -traditional
LDFLAGS_vmlinux := -T
@@ -17,7 +17,7 @@ KBUILD_CFLAGS := -m32 -D__KERNEL__ $(LI
$(call cc-option,-fno-stack-protector)
LDFLAGS := -m elf_i386
-$(obj)/vmlinux: $(src)/vmlinux_32.lds $(obj)/head_32.o $(obj)/misc_32.o $(obj)/piggy.o FORCE
+$(obj)/vmlinux: $(src)/vmlinux_32.lds $(obj)/head_32.o $(obj)/lzma_misc.o $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
@@ -37,14 +37,14 @@ $(obj)/vmlinux.bin.all: $(vmlinux.bin.al
$(call if_changed,relocbin)
ifdef CONFIG_RELOCATABLE
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,gzip)
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
+ $(call if_changed,lzma)
else
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,lzma)
endif
LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
-$(obj)/piggy.o: $(src)/vmlinux_32.scr $(obj)/vmlinux.bin.gz FORCE
+$(obj)/piggy.o: $(src)/vmlinux_32.scr $(obj)/vmlinux.bin.lzma FORCE
$(call if_changed,ld)

63
target/linux/rdc/patches-2.6.25/001-rdc3210_flash_map.patch
View file

@ -1,63 +0,0 @@
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -110,6 +110,50 @@
Sun Microsystems boardsets. This driver will require CFI support
in the kernel, so if you did not enable CFI previously, do that now.
+config MTD_RDC3210
+ tristate "CFI Flash device mapped on RDC3210"
+ depends on X86 && MTD_CFI && MTD_PARTITIONS
+ help
+ RDC-3210 is the flash device we find on Ralink reference board.
+
+config MTD_RDC3210_STATIC_MAP
+ bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
+ select MTD_RDC3210_FACTORY_PRESENT
+ help
+ The mapping driver will use the static partition map for the
+ RDC-3210 flash device.
+
+config MTD_RDC3210_FACTORY_PRESENT
+ bool "Reserve a partition on RDC3210 for factory presets"
+ depends on MTD_RDC3210
+ default y
+ help
+ The mapping driver will reserve a partition on the RDC-3210 flash
+ device for resetting flash contents to factory defaults.
+
+config MTD_RDC3210_ALLOW_JFFS2
+ bool "JFFS2 filesystem usable in a partition on RDC3210"
+ depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
+ help
+ The mapping driver will align a partition on the RDC-3210 flash
+ device to an erase-block boundary so that a JFFS2 filesystem may
+ reside on it.
+
+config MTD_RDC3210_SIZE
+ hex "Amount of flash memory on RDC3210"
+ depends on MTD_RDC3210
+ default "0x400000"
+ help
+ Total size in bytes of the RDC-3210 flash device
+
+config MTD_RDC3210_BUSWIDTH
+ int "Width of CFI Flash device mapped on RDC3210"
+ depends on MTD_RDC3210
+ default "2"
+ help
+ Number of bytes addressed on the RDC-3210 flash device before
+ addressing the same chip again
+
config MTD_SC520CDP
tristate "CFI Flash device mapped on AMD SC520 CDP"
depends on X86 && MTD_CFI && MTD_CONCAT
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -29,6 +29,7 @@
obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o
obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
+obj-$(CONFIG_MTD_RDC3210) += rdc3210.o
obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o

11
target/linux/rdc/patches-2.6.25/003-rootfstype.patch
View file

@ -1,11 +0,0 @@
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -163,6 +163,8 @@
{
char *s = page;
+ if (!root_fs_names)
+ root_fs_names = "squashfs,jffs2";
if (root_fs_names) {
strcpy(page, root_fs_names);
while (*s++) {

20
target/linux/rdc/patches-2.6.25/004-yenta_mystery.patch
View file

@ -1,20 +0,0 @@
--- linux-2.6.24.7.orig/drivers/pcmcia/yenta_socket.c 2008-10-26 08:30:07.000000000 -0700
+++ linux-2.6.24.7/drivers/pcmcia/yenta_socket.c 2008-10-26 08:54:27.000000000 -0700
@@ -1171,6 +1171,17 @@
/* We must finish initialization here */
+#ifdef CONFIG_X86_RDC
+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
+#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
+
+ config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
+ config_writel(socket, 35*4, 0x00000022);
+ config_writel(socket, 36*4, 0x60200000);
+ config_writel(socket, 40*4, 0x7e020000);
+#endif
+
if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
/* No IRQ or request_irq failed. Poll */
socket->cb_irq = 0; /* But zero is a valid IRQ number. */

42
target/linux/rdc/patches-2.6.25/005-fix_amit_breakage.patch
View file

@ -1,42 +0,0 @@
diff -ru linux-2.6.24.7.orig/arch/x86/boot/boot.h linux-2.6.24.7/arch/x86/boot/boot.h
--- linux-2.6.24.7.orig/arch/x86/boot/boot.h 2008-10-26 20:18:14.000000000 -0700
+++ linux-2.6.24.7/arch/x86/boot/boot.h 2008-10-26 20:18:36.000000000 -0700
@@ -60,7 +60,7 @@
{
asm volatile("outl %0,%1" : : "a" (v), "dN" (port));
}
-static inline u32 inl(u32 port)
+static inline u32 inl(u16 port)
{
u32 v;
asm volatile("inl %1,%0" : "=a" (v) : "dN" (port));
diff -ru linux-2.6.24.7.orig/arch/x86/boot/pm.c linux-2.6.24.7/arch/x86/boot/pm.c
--- linux-2.6.24.7.orig/arch/x86/boot/pm.c 2008-10-26 19:55:50.000000000 -0700
+++ linux-2.6.24.7/arch/x86/boot/pm.c 2008-10-26 21:38:12.000000000 -0700
@@ -16,6 +16,9 @@
#include "boot.h"
#include <asm/segment.h>
+#ifdef CONFIG_X86_RDC
+#include <asm/mach-rdc/rdc321x_defs.h>
+#endif
/*
* Invoke the realmode switch hook if present; otherwise
@@ -160,6 +163,16 @@
die();
}
+#ifdef CONFIG_X86_RDC
+ {
+ u32 bootctl;
+
+ outl(0x80003840, RDC3210_CFGREG_ADDR);
+ bootctl = inl(RDC3210_CFGREG_DATA) | 0x07ff0000;
+ outl(bootctl, RDC3210_CFGREG_DATA);
+ }
+#endif
+
/* Reset coprocessor (IGNNE#) */
reset_coprocessor();

63
target/linux/rdc/patches-2.6.25/600-x86_lzma.patch
View file

@ -1,63 +0,0 @@
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -172,4 +172,9 @@
quiet_cmd_gzip = GZIP $@
cmd_gzip = gzip -f -9 < $< > $@
-
+# LZMA
+#
+quiet_cmd_lzma = LZMA $@
+cmd_lzma = bash -e scripts/lzma_kern $< $@ -lc7 -lp0 -pb0
+# to use lzmacomp,
+# cmd_lzma = lzmacomp $< 700 > $@
--- /dev/null
+++ b/scripts/lzma_kern
@@ -0,0 +1,4 @@
+get-size() { echo "$5" ;}
+printf -v len '%.8x' "$(get-size $(ls -l "$1"))"
+lzma e "$@"
+echo -ne "\x$(echo $len | cut -c 7,8)\x$(echo $len | cut -c 5,6)\x$(echo $len | cut -c 3,4)\x$(echo $len | cut -c 1,2)" >> "$2"
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -4,7 +4,7 @@
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head_$(BITS).o misc.o piggy.o
+targets := vmlinux vmlinux.bin vmlinux.bin.lzma head_$(BITS).o lzma_misc.o piggy.o
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
@@ -18,7 +18,7 @@
LDFLAGS := -m elf_$(UTS_MACHINE)
LDFLAGS_vmlinux := -T
-$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
+$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/lzma_misc.o $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
@@ -44,11 +44,11 @@
$(call if_changed,relocbin)
ifdef CONFIG_RELOCATABLE
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,gzip)
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
+ $(call if_changed,lzma)
else
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,lzma)
endif
LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
@@ -60,5 +60,5 @@
endif
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.lzma FORCE
$(call if_changed,ld)

63
target/linux/rdc/patches-2.6.27/001-rdc3210_flash_map.patch
View file

@ -1,63 +0,0 @@
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -110,6 +110,50 @@
Sun Microsystems boardsets. This driver will require CFI support
in the kernel, so if you did not enable CFI previously, do that now.
+config MTD_RDC3210
+ tristate "CFI Flash device mapped on RDC3210"
+ depends on X86 && MTD_CFI && MTD_PARTITIONS
+ help
+ RDC-3210 is the flash device we find on Ralink reference board.
+
+config MTD_RDC3210_STATIC_MAP
+ bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
+ select MTD_RDC3210_FACTORY_PRESENT
+ help
+ The mapping driver will use the static partition map for the
+ RDC-3210 flash device.
+
+config MTD_RDC3210_FACTORY_PRESENT
+ bool "Reserve a partition on RDC3210 for factory presets"
+ depends on MTD_RDC3210
+ default y
+ help
+ The mapping driver will reserve a partition on the RDC-3210 flash
+ device for resetting flash contents to factory defaults.
+
+config MTD_RDC3210_ALLOW_JFFS2
+ bool "JFFS2 filesystem usable in a partition on RDC3210"
+ depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
+ help
+ The mapping driver will align a partition on the RDC-3210 flash
+ device to an erase-block boundary so that a JFFS2 filesystem may
+ reside on it.
+
+config MTD_RDC3210_SIZE
+ hex "Amount of flash memory on RDC3210"
+ depends on MTD_RDC3210
+ default "0x400000"
+ help
+ Total size in bytes of the RDC-3210 flash device
+
+config MTD_RDC3210_BUSWIDTH
+ int "Width of CFI Flash device mapped on RDC3210"
+ depends on MTD_RDC3210
+ default "2"
+ help
+ Number of bytes addressed on the RDC-3210 flash device before
+ addressing the same chip again
+
config MTD_SC520CDP
tristate "CFI Flash device mapped on AMD SC520 CDP"
depends on X86 && MTD_CFI && MTD_CONCAT
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -29,6 +29,7 @@
obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o
obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
+obj-$(CONFIG_MTD_RDC3210) += rdc3210.o
obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o

10
target/linux/rdc/patches-2.6.27/002-cmdline_setup.patch
View file

@ -1,10 +0,0 @@
--- a/arch/x86/kernel/setup.c 2009-04-24 11:37:41.000000000 +0200
+++ b/arch/x86/kernel/setup.c 2009-04-24 11:38:43.000000000 +0200
@@ -701,6 +701,7 @@
bss_resource.start = virt_to_phys(&__bss_start);
bss_resource.end = virt_to_phys(&__bss_stop)-1;
+ strcat(boot_command_line, " init=/etc/preinit console=ttyS0,38400");
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;

11
target/linux/rdc/patches-2.6.27/003-rootfstype.patch
View file

@ -1,11 +0,0 @@
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -163,6 +163,8 @@
{
char *s = page;
+ if (!root_fs_names)
+ root_fs_names = "squashfs,jffs2";
if (root_fs_names) {
strcpy(page, root_fs_names);
while (*s++) {

20
target/linux/rdc/patches-2.6.27/004-yenta_mystery.patch
View file

@ -1,20 +0,0 @@
--- linux-2.6.24.7.orig/drivers/pcmcia/yenta_socket.c 2008-10-26 08:30:07.000000000 -0700
+++ linux-2.6.24.7/drivers/pcmcia/yenta_socket.c 2008-10-26 08:54:27.000000000 -0700
@@ -1171,6 +1171,17 @@
/* We must finish initialization here */
+#ifdef CONFIG_X86_RDC
+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
+#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
+
+ config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
+ config_writel(socket, 35*4, 0x00000022);
+ config_writel(socket, 36*4, 0x60200000);
+ config_writel(socket, 40*4, 0x7e020000);
+#endif
+
if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
/* No IRQ or request_irq failed. Poll */
socket->cb_irq = 0; /* But zero is a valid IRQ number. */

42
target/linux/rdc/patches-2.6.27/005-fix_amit_breakage.patch
View file

@ -1,42 +0,0 @@
diff -ru linux-2.6.24.7.orig/arch/x86/boot/boot.h linux-2.6.24.7/arch/x86/boot/boot.h
--- linux-2.6.24.7.orig/arch/x86/boot/boot.h 2008-10-26 20:18:14.000000000 -0700
+++ linux-2.6.24.7/arch/x86/boot/boot.h 2008-10-26 20:18:36.000000000 -0700
@@ -60,7 +60,7 @@
{
asm volatile("outl %0,%1" : : "a" (v), "dN" (port));
}
-static inline u32 inl(u32 port)
+static inline u32 inl(u16 port)
{
u32 v;
asm volatile("inl %1,%0" : "=a" (v) : "dN" (port));
diff -ru linux-2.6.24.7.orig/arch/x86/boot/pm.c linux-2.6.24.7/arch/x86/boot/pm.c
--- linux-2.6.24.7.orig/arch/x86/boot/pm.c 2008-10-26 19:55:50.000000000 -0700
+++ linux-2.6.24.7/arch/x86/boot/pm.c 2008-10-26 21:38:12.000000000 -0700
@@ -16,6 +16,9 @@
#include "boot.h"
#include <asm/segment.h>
+#ifdef CONFIG_X86_RDC
+#include <asm/mach-rdc/rdc321x_defs.h>
+#endif
/*
* Invoke the realmode switch hook if present; otherwise
@@ -160,6 +163,16 @@
die();
}
+#ifdef CONFIG_X86_RDC
+ {
+ u32 bootctl;
+
+ outl(0x80003840, RDC3210_CFGREG_ADDR);
+ bootctl = inl(RDC3210_CFGREG_DATA) | 0x07ff0000;
+ outl(bootctl, RDC3210_CFGREG_DATA);
+ }
+#endif
+
/* Reset coprocessor (IGNNE#) */
reset_coprocessor();

3139
target/linux/rdc/patches-2.6.27/006-bzip2_lzma_x86.patch
View file

File diff suppressed because it is too large Load diff