From 3e83f60a6658cfc6e62f9f599efbe8f779a41b4e Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Fri, 20 May 2011 10:06:15 +0000
Subject: [PATCH] add support for D-Link DVA-G3810BN/TL

This patch adds support for D-Link's DVA-G3810BN/TL product.

Signed-off-by: Roman Dumycz <roman@secureas.com>

SVN-Revision: 26956
---
 .../etc/defconfig/DVAG3810BN/network          | 29 +++++++++++++++++++
 .../brcm63xx/base-files/etc/init.d/defconfig  |  4 +++
 target/linux/brcm63xx/image/Makefile          |  2 ++
 3 files changed, 35 insertions(+)
 create mode 100644 target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network

diff --git a/target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network b/target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network
new file mode 100644
index 0000000000..181ca011ca
--- /dev/null
+++ b/target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network
@@ -0,0 +1,29 @@
+# Copyright (C) 2008 OpenWrt.org
+
+config interface loopback
+        option ifname   lo
+        option proto    static
+        option ipaddr   127.0.0.1
+        option netmask  255.0.0.0
+
+config interface lan
+        option type     bridge
+        option ifname   eth1.1
+        option proto    static
+        option ipaddr   192.168.1.1
+        option netmask  255.255.255.0
+        option nat      1
+
+config interface wan
+	option ifname	eth0
+	option proto	dhcp
+
+config	switch	eth1
+	option	enable	1
+	option	enable_vlan 1
+	option	reset	1
+
+config	switch_vlan
+	option	vlan	1
+	option	device	eth1
+	option	ports	"0 1 2 3 5t"
diff --git a/target/linux/brcm63xx/base-files/etc/init.d/defconfig b/target/linux/brcm63xx/base-files/etc/init.d/defconfig
index dac9c23440..8fd783d4d6 100755
--- a/target/linux/brcm63xx/base-files/etc/init.d/defconfig
+++ b/target/linux/brcm63xx/base-files/etc/init.d/defconfig
@@ -8,6 +8,10 @@ START=05
 start() {
 	local board=$(awk 'BEGIN{FS="[ \t:/]+"} /system type/ {print $4}' /proc/cpuinfo)
 
+	if [ "$board" = "96358VW" ] && [ -e /proc/switch/eth1/enable ]; then
+		board="DVAG3810BN"
+	fi
+
 	[ ! -d /etc/defconfig/$board ] && board="generic"
 
 	for f in $( ls /etc/defconfig/$board ); do
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index bf292de7e4..f1fa4f540e 100644
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -195,6 +195,8 @@ define Image/Build
 	$(call Image/Build/CFEFIXUP,$(1),96358GW,AW4139,6358,DSL274XB-C2)
 	# D-Link DSL-2740B/DSL-2741B, rev C3
 	$(call Image/Build/CFE,$(1),AW4139,6358,DSL274XB-C3)
+	# D-Link DVA-G3810BN/TL
+	$(call Image/Build/CFE,$(1),96358GW,6358,DVAG3810BN)
 
 	# TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
 	$(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)