ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N
As we already have support for CF-E316N v2 and many devices from this vendor look similar, the support was included in existing mach-*.c file, with few cleanups and fixes. All 3 devices are based on Qualcomm/Atheros QCA9531 v2. COMFAST CF-E320N v2 is a ceiling mount AP with PoE support. Short specification: - 650/393/216 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, both with PoE support - 64 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - 2x internal antennas - 1x RGB LED, 1x button - UART (J1), GPIO (J9) and USB (J2) headers on PCB - external watchdog (Pericon Technology PT7A7514) COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support. They seem to have different only the front panel. Short specification: - 650/393/216 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, WAN with PoE support - 1x USB 2.0 (in CF-E520N covered by panel, available on PCB) - 32 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - 2x internal antennas - 1x LED, 1x button - UART (J1) headers on PCB Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz
John Crispin
parent
c380772c19
commit
31952dbd1c
10 changed files with 331 additions and 44 deletions
|
|
@ -115,6 +115,15 @@ cf-e316n-v2)
|
|||
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
|
||||
;;
|
||||
cf-e320n-v2)
|
||||
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
|
||||
ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1"
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
|
||||
;;
|
||||
cf-e520n|\
|
||||
cf-e530n)
|
||||
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
|
||||
;;
|
||||
cpe210|\
|
||||
cpe510)
|
||||
ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
|
||||
|
|
|
|||
|
|
@ -86,9 +86,14 @@ get_status_led() {
|
|||
cap4200ag)
|
||||
status_led="senao:green:pwr"
|
||||
;;
|
||||
cf-e316n-v2)
|
||||
cf-e316n-v2|\
|
||||
cf-e520n|\
|
||||
cf-e530n)
|
||||
status_led="$board:blue:wan"
|
||||
;;
|
||||
cf-e320n-v2)
|
||||
status_led="$board:blue:wlan"
|
||||
;;
|
||||
cpe510)
|
||||
status_led="tp-link:green:link4"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -497,9 +497,18 @@ ar71xx_board_detect() {
|
|||
*CAP4200AG)
|
||||
name="cap4200ag"
|
||||
;;
|
||||
*"COMFAST CF-E316N v2")
|
||||
*"CF-E316N v2")
|
||||
name="cf-e316n-v2"
|
||||
;;
|
||||
*"CF-E320N v2")
|
||||
name="cf-e320n-v2"
|
||||
;;
|
||||
*CF-E520N)
|
||||
name="cf-e520n"
|
||||
;;
|
||||
*CF-E530N)
|
||||
name="cf-e530n"
|
||||
;;
|
||||
*"CPE210/220")
|
||||
name="cpe210"
|
||||
tplink_pharos_board_detect
|
||||
|
|
|
|||
|
|
@ -182,6 +182,9 @@ platform_check_image() {
|
|||
c-55|\
|
||||
carambola2|\
|
||||
cf-e316n-v2|\
|
||||
cf-e320n-v2|\
|
||||
cf-e520n|\
|
||||
cf-e530n|\
|
||||
dgl-5500-a1|\
|
||||
dhp-1565-a1|\
|
||||
dir-505-a1|\
|
||||
|
|
|
|||
|
|
@ -62,6 +62,9 @@ CONFIG_ATH79_MACH_CAP324=y
|
|||
CONFIG_ATH79_MACH_CAP4200AG=y
|
||||
CONFIG_ATH79_MACH_CARAMBOLA2=y
|
||||
CONFIG_ATH79_MACH_CF_E316N_V2=y
|
||||
CONFIG_ATH79_MACH_CF_E320N_V2=y
|
||||
CONFIG_ATH79_MACH_CF_E520N=y
|
||||
CONFIG_ATH79_MACH_CF_E530N=y
|
||||
CONFIG_ATH79_MACH_CPE510=y
|
||||
CONFIG_ATH79_MACH_CR3000=y
|
||||
CONFIG_ATH79_MACH_CR5000=y
|
||||
|
|
|
|||
|
|
@ -1677,7 +1677,7 @@ config ATH79_MACH_CARAMBOLA2
|
|||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_CF_E316N_V2
|
||||
bool "COMFAST CF-E316N v2 board"
|
||||
bool "COMFAST CF-E316N v2 support"
|
||||
select SOC_AR934X
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
|
|
@ -1686,6 +1686,36 @@ config ATH79_MACH_CF_E316N_V2
|
|||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_CF_E320N_V2
|
||||
bool "COMFAST CF-E320N v2 support"
|
||||
select SOC_QCA953X
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_CF_E520N
|
||||
bool "COMFAST CF-E520N support"
|
||||
select SOC_QCA953X
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_CF_E530N
|
||||
bool "COMFAST CF-E530N support"
|
||||
select SOC_QCA953X
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_BHU_BXU2000N2_A
|
||||
bool "BHU BXU2000n-2 rev. A support"
|
||||
select SOC_AR934X
|
||||
|
|
|
|||
|
|
@ -68,6 +68,9 @@ obj-$(CONFIG_ATH79_MACH_CAP324) += mach-cap324.o
|
|||
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
|
||||
obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CF_E320N_V2) += mach-cf-e316n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
|
||||
obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o
|
||||
obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o
|
||||
|
|
|
|||
|
|
@ -1,9 +1,10 @@
|
|||
/*
|
||||
* COMFAST CF-E316N v2
|
||||
* by Shenzhen Four Seas Global Link Network Technology Co., Ltd
|
||||
*
|
||||
* aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID)
|
||||
* Support for COMFAST boards:
|
||||
* - CF-E316N v2 (AR9341)
|
||||
* - CF-E320N v2 (QCA9531)
|
||||
* - CF-E520N/CF-E530N (QCA9531)
|
||||
*
|
||||
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
|
||||
* Copyright (C) 2015 Paul Fertser <fercerpav@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -27,72 +28,171 @@
|
|||
#include "dev-usb.h"
|
||||
#include "machtypes.h"
|
||||
|
||||
#define CF_EXXXN_KEYS_POLL_INTERVAL 20
|
||||
#define CF_EXXXN_KEYS_DEBOUNCE_INTERVAL (3 * CF_EXXXN_KEYS_POLL_INTERVAL)
|
||||
|
||||
/* CF-E316N v2 */
|
||||
#define CF_E316N_V2_GPIO_LED_DIAG_B 0
|
||||
#define CF_E316N_V2_GPIO_LED_DIAG_R 2
|
||||
#define CF_E316N_V2_GPIO_LED_DIAG_G 3
|
||||
#define CF_E316N_V2_GPIO_LED_WLAN 12
|
||||
#define CF_E316N_V2_GPIO_LED_WAN 17
|
||||
#define CF_E316N_V2_GPIO_LED_LAN 19
|
||||
|
||||
#define CF_E316N_V2_GPIO_EXT_WDT 16
|
||||
|
||||
#define CF_E316N_V2_GPIO_EXTERNAL_PA0 13
|
||||
#define CF_E316N_V2_GPIO_EXTERNAL_PA1 14
|
||||
|
||||
#define CF_E316N_V2_GPIO_BTN_RESET 20
|
||||
|
||||
static struct gpio_led cf_e316n_v2_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "cf-e316n-v2:blue:diag",
|
||||
.gpio = 0,
|
||||
.gpio = CF_E316N_V2_GPIO_LED_DIAG_B,
|
||||
.active_low = 0,
|
||||
}, {
|
||||
.name = "cf-e316n-v2:red:diag",
|
||||
.gpio = 2,
|
||||
.gpio = CF_E316N_V2_GPIO_LED_DIAG_R,
|
||||
.active_low = 0,
|
||||
}, {
|
||||
.name = "cf-e316n-v2:green:diag",
|
||||
.gpio = 3,
|
||||
.gpio = CF_E316N_V2_GPIO_LED_DIAG_G,
|
||||
.active_low = 0,
|
||||
}, {
|
||||
.name = "cf-e316n-v2:blue:wlan",
|
||||
.gpio = 12,
|
||||
.gpio = CF_E316N_V2_GPIO_LED_WLAN,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "cf-e316n-v2:blue:wan",
|
||||
.gpio = 17,
|
||||
.gpio = CF_E316N_V2_GPIO_LED_WAN,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "cf-e316n-v2:blue:lan",
|
||||
.gpio = 19,
|
||||
.gpio = CF_E316N_V2_GPIO_LED_LAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button cf_e316n_v2_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "Reset button",
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = 60,
|
||||
.gpio = 20,
|
||||
.debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = CF_E316N_V2_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
/* There's a Pericon Technology PT7A7514 connected to GPIO 16 */
|
||||
#define EXT_WATCHDOG_GPIO 16
|
||||
/* CF-E320N v2 */
|
||||
#define CF_E320N_V2_GPIO_LED_WLAN 0
|
||||
#define CF_E320N_V2_GPIO_LED_WAN 2
|
||||
#define CF_E320N_V2_GPIO_LED_LAN 3
|
||||
|
||||
#define CF_E320N_V2_GPIO_HEADER_J9_1 14
|
||||
#define CF_E320N_V2_GPIO_HEADER_J9_2 12
|
||||
#define CF_E320N_V2_GPIO_HEADER_J9_3 11
|
||||
#define CF_E320N_V2_GPIO_HEADER_J9_4 16
|
||||
|
||||
#define CF_E320N_V2_GPIO_EXT_WDT 13
|
||||
|
||||
#define CF_E320N_V2_GPIO_BTN_RESET 17
|
||||
|
||||
static struct gpio_led cf_e320n_v2_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "cf-e320n-v2:green:lan",
|
||||
.gpio = CF_E320N_V2_GPIO_LED_LAN,
|
||||
.active_low = 0,
|
||||
}, {
|
||||
.name = "cf-e320n-v2:red:wan",
|
||||
.gpio = CF_E320N_V2_GPIO_LED_WAN,
|
||||
.active_low = 0,
|
||||
}, {
|
||||
.name = "cf-e320n-v2:blue:wlan",
|
||||
.gpio = CF_E320N_V2_GPIO_LED_WLAN,
|
||||
.active_low = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button cf_e320n_v2_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "Reset button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = CF_E320N_V2_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
/* CF-E520N/CF-E530N */
|
||||
#define CF_E5X0N_GPIO_LED_WAN 11
|
||||
#define CF_E5X0N_GPIO_BTN_RESET 17
|
||||
|
||||
static struct gpio_led cf_e520n_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "cf-e520n:blue:wan",
|
||||
.gpio = CF_E5X0N_GPIO_LED_WAN,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_led cf_e530n_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "cf-e530n:blue:wan",
|
||||
.gpio = CF_E5X0N_GPIO_LED_WAN,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
/*
|
||||
* Some COMFAST devices include external hardware watchdog chip,
|
||||
* Pericon Technology PT7A7514, connected to a selected GPIO
|
||||
* and WiSoC RESET_L input. Watchdog time-out is ~1.6 s.
|
||||
*/
|
||||
#define CF_EXXXN_EXT_WDT_TIMEOUT_MS 500
|
||||
|
||||
static struct timer_list gpio_wdt_timer;
|
||||
|
||||
static void gpio_wdt_toggle(unsigned long period)
|
||||
static void gpio_wdt_toggle(unsigned long gpio)
|
||||
{
|
||||
static int state;
|
||||
|
||||
state = !state;
|
||||
gpio_set_value(EXT_WATCHDOG_GPIO, state);
|
||||
mod_timer(&gpio_wdt_timer, jiffies + period);
|
||||
gpio_set_value(gpio, state);
|
||||
|
||||
mod_timer(&gpio_wdt_timer,
|
||||
jiffies + msecs_to_jiffies(CF_EXXXN_EXT_WDT_TIMEOUT_MS));
|
||||
}
|
||||
|
||||
static void __init cf_exxxn_common_setup(int gpio_wdt)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1f011000);
|
||||
|
||||
if (gpio_wdt > -1) {
|
||||
gpio_request_one(gpio_wdt, GPIOF_OUT_INIT_HIGH,
|
||||
"PT7A7514 watchdog");
|
||||
|
||||
setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, gpio_wdt);
|
||||
gpio_wdt_toggle(gpio_wdt);
|
||||
}
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
ath79_register_wmac(art, NULL);
|
||||
|
||||
ath79_register_usb();
|
||||
}
|
||||
|
||||
static void __init cf_e316n_v2_setup(void)
|
||||
{
|
||||
u8 *maclan = (u8 *) KSEG1ADDR(0x1f010000);
|
||||
u8 *macwlan = (u8 *) KSEG1ADDR(0x1f011002);
|
||||
u8 *ee = (u8 *) KSEG1ADDR(0x1f011000);
|
||||
u8 tmpmac[ETH_ALEN];
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1f010000);
|
||||
|
||||
gpio_request(EXT_WATCHDOG_GPIO, "PT7A7514 watchdog");
|
||||
gpio_direction_output(EXT_WATCHDOG_GPIO, 0);
|
||||
setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, msecs_to_jiffies(500));
|
||||
gpio_wdt_toggle(msecs_to_jiffies(1));
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
cf_exxxn_common_setup(CF_E316N_V2_GPIO_EXT_WDT);
|
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
|
||||
|
||||
ath79_register_mdio(1, 0x0);
|
||||
|
||||
/* GMAC0 is connected to the PHY0 of the internal switch */
|
||||
|
|
@ -101,32 +201,129 @@ static void __init cf_e316n_v2_setup(void)
|
|||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, maclan, 0);
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
||||
ath79_register_eth(0);
|
||||
|
||||
/* GMAC1 is connected to the internal switch */
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, maclan, 2);
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
|
||||
ath79_register_eth(1);
|
||||
|
||||
/* Enable 2x Skyworks SE2576L WLAN power amplifiers */
|
||||
gpio_request(13, "RF Amp 1");
|
||||
gpio_direction_output(13, 1);
|
||||
gpio_request(14, "RF Amp 2");
|
||||
gpio_direction_output(14, 1);
|
||||
ath79_init_mac(tmpmac, macwlan, 0);
|
||||
ath79_register_wmac(ee, tmpmac);
|
||||
gpio_request_one(CF_E316N_V2_GPIO_EXTERNAL_PA0, GPIOF_OUT_INIT_HIGH,
|
||||
"WLAN PA0");
|
||||
gpio_request_one(CF_E316N_V2_GPIO_EXTERNAL_PA1, GPIOF_OUT_INIT_HIGH,
|
||||
"WLAN PA1");
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e316n_v2_leds_gpio),
|
||||
cf_e316n_v2_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(1, 20,
|
||||
ath79_register_gpio_keys_polled(1, CF_EXXXN_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(cf_e316n_v2_gpio_keys),
|
||||
cf_e316n_v2_gpio_keys);
|
||||
|
||||
/* J1 is a High-Speed USB port, pin 1 is Vcc */
|
||||
ath79_register_usb();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_CF_E316N_V2, "CF-E316N-V2", "COMFAST CF-E316N v2",
|
||||
cf_e316n_v2_setup);
|
||||
|
||||
static void __init cf_exxxn_qca953x_eth_setup(void)
|
||||
{
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1f010000);
|
||||
|
||||
ath79_setup_ar933x_phy4_switch(false, false);
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
ath79_switch_data.phy4_mii_en = 1;
|
||||
ath79_switch_data.phy_poll_mask |= BIT(4);
|
||||
|
||||
/* LAN */
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
||||
ath79_eth1_data.speed = SPEED_1000;
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
|
||||
ath79_register_eth(1);
|
||||
|
||||
/* WAN */
|
||||
ath79_eth0_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.speed = SPEED_100;
|
||||
ath79_eth0_data.phy_mask = BIT(4);
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
||||
ath79_register_eth(0);
|
||||
}
|
||||
|
||||
static void __init cf_e320n_v2_setup(void)
|
||||
{
|
||||
cf_exxxn_common_setup(CF_E320N_V2_GPIO_EXT_WDT);
|
||||
|
||||
cf_exxxn_qca953x_eth_setup();
|
||||
|
||||
/* Disable JTAG (enables GPIO0-3) */
|
||||
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
|
||||
|
||||
ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_LAN, true);
|
||||
ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_WAN, true);
|
||||
ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_WLAN, true);
|
||||
|
||||
ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_LAN, 0);
|
||||
ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_WAN, 0);
|
||||
ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_WLAN, 0);
|
||||
|
||||
/* Enable GPIO function for GPIOs in J9 header */
|
||||
ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_1, 0);
|
||||
ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_2, 0);
|
||||
ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_3, 0);
|
||||
ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_4, 0);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e320n_v2_leds_gpio),
|
||||
cf_e320n_v2_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(cf_e320n_v2_gpio_keys),
|
||||
cf_e320n_v2_gpio_keys);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_CF_E320N_V2, "CF-E320N-V2", "COMFAST CF-E320N v2",
|
||||
cf_e320n_v2_setup);
|
||||
|
||||
static void __init cf_e5x0n_gpio_setup(void)
|
||||
{
|
||||
ath79_gpio_direction_select(CF_E5X0N_GPIO_LED_WAN, true);
|
||||
|
||||
ath79_gpio_output_select(CF_E5X0N_GPIO_LED_WAN, 0);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(cf_e320n_v2_gpio_keys),
|
||||
cf_e320n_v2_gpio_keys);
|
||||
}
|
||||
|
||||
static void __init cf_e520n_setup(void)
|
||||
{
|
||||
cf_exxxn_common_setup(-1);
|
||||
|
||||
cf_exxxn_qca953x_eth_setup();
|
||||
|
||||
cf_e5x0n_gpio_setup();
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e520n_leds_gpio),
|
||||
cf_e520n_leds_gpio);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_CF_E520N, "CF-E520N", "COMFAST CF-E520N",
|
||||
cf_e520n_setup);
|
||||
|
||||
static void __init cf_e530n_setup(void)
|
||||
{
|
||||
cf_exxxn_common_setup(-1);
|
||||
|
||||
cf_exxxn_qca953x_eth_setup();
|
||||
|
||||
cf_e5x0n_gpio_setup();
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e530n_leds_gpio),
|
||||
cf_e530n_leds_gpio);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_CF_E530N, "CF-E530N", "COMFAST CF-E530N",
|
||||
cf_e530n_setup);
|
||||
|
|
|
|||
|
|
@ -53,6 +53,9 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
|
||||
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
|
||||
ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
|
||||
ATH79_MACH_CF_E320N_V2, /* COMFAST CF-E320N v2 */
|
||||
ATH79_MACH_CF_E520N, /* COMFAST CF-E520N */
|
||||
ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
|
||||
ATH79_MACH_CPE210, /* TP-LINK CPE210 */
|
||||
ATH79_MACH_CPE510, /* TP-LINK CPE510 */
|
||||
ATH79_MACH_CR3000, /* PowerCloud CR3000 */
|
||||
|
|
|
|||
|
|
@ -23,10 +23,35 @@ define Device/cf-e316n-v2
|
|||
BOARDNAME = CF-E316N-V2
|
||||
IMAGE_SIZE = 16192k
|
||||
CONSOLE = ttyS0,115200
|
||||
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro
|
||||
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
|
||||
endef
|
||||
TARGET_DEVICES += cf-e316n-v2
|
||||
|
||||
define Device/cf-e320n-v2
|
||||
$(Device/cf-e316n-v2)
|
||||
DEVICE_TITLE := COMFAST CF-E320N v2
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
||||
BOARDNAME = CF-E320N-V2
|
||||
endef
|
||||
TARGET_DEVICES += cf-e320n-v2
|
||||
|
||||
define Device/cf-e520n
|
||||
DEVICE_TITLE := COMFAST CF-E520N
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
||||
BOARDNAME = CF-E520N
|
||||
IMAGE_SIZE = 8000k
|
||||
CONSOLE = ttyS0,115200
|
||||
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
|
||||
endef
|
||||
TARGET_DEVICES += cf-e520n
|
||||
|
||||
define Device/cf-e530n
|
||||
$(Device/cf-e520n)
|
||||
DEVICE_TITLE := COMFAST CF-E530N
|
||||
BOARDNAME = CF-E530N
|
||||
endef
|
||||
TARGET_DEVICES += cf-e530n
|
||||
|
||||
define Device/domywifi-dw33d
|
||||
DEVICE_TITLE := DomyWifi DW33D
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-ledtrig-usbdev kmod-ath10k
|
||||
|
|
|
|||
Loading…
Reference in a new issue