ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N

As we already have support for CF-E316N v2 and many devices from
this vendor look similar, the support was included in existing
mach-*.c file, with few cleanups and fixes.

All 3 devices are based on Qualcomm/Atheros QCA9531 v2.

COMFAST CF-E320N v2 is a ceiling mount AP with PoE support.
Short specification:

- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, both with PoE support
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x RGB LED, 1x button
- UART (J1), GPIO (J9) and USB (J2) headers on PCB
- external watchdog (Pericon Technology PT7A7514)

COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support.
They seem to have different only the front panel.
Short specification:

- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, WAN with PoE support
- 1x USB 2.0 (in CF-E520N covered by panel, available on PCB)
- 32 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x LED, 1x button
- UART (J1) headers on PCB

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz 2016-10-05 02:24:58 +02:00 committed by John Crispin
parent c380772c19
commit 31952dbd1c
10 changed files with 331 additions and 44 deletions

View file

@ -115,6 +115,15 @@ cf-e316n-v2)
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
;;
cf-e320n-v2)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
;;
cf-e520n|\
cf-e530n)
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
;;
cpe210|\
cpe510)
ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"

View file

@ -86,9 +86,14 @@ get_status_led() {
cap4200ag)
status_led="senao:green:pwr"
;;
cf-e316n-v2)
cf-e316n-v2|\
cf-e520n|\
cf-e530n)
status_led="$board:blue:wan"
;;
cf-e320n-v2)
status_led="$board:blue:wlan"
;;
cpe510)
status_led="tp-link:green:link4"
;;

View file

@ -497,9 +497,18 @@ ar71xx_board_detect() {
*CAP4200AG)
name="cap4200ag"
;;
*"COMFAST CF-E316N v2")
*"CF-E316N v2")
name="cf-e316n-v2"
;;
*"CF-E320N v2")
name="cf-e320n-v2"
;;
*CF-E520N)
name="cf-e520n"
;;
*CF-E530N)
name="cf-e530n"
;;
*"CPE210/220")
name="cpe210"
tplink_pharos_board_detect

View file

@ -182,6 +182,9 @@ platform_check_image() {
c-55|\
carambola2|\
cf-e316n-v2|\
cf-e320n-v2|\
cf-e520n|\
cf-e530n|\
dgl-5500-a1|\
dhp-1565-a1|\
dir-505-a1|\

View file

@ -62,6 +62,9 @@ CONFIG_ATH79_MACH_CAP324=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_CF_E316N_V2=y
CONFIG_ATH79_MACH_CF_E320N_V2=y
CONFIG_ATH79_MACH_CF_E520N=y
CONFIG_ATH79_MACH_CF_E530N=y
CONFIG_ATH79_MACH_CPE510=y
CONFIG_ATH79_MACH_CR3000=y
CONFIG_ATH79_MACH_CR5000=y

View file

@ -1677,7 +1677,7 @@ config ATH79_MACH_CARAMBOLA2
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E316N_V2
bool "COMFAST CF-E316N v2 board"
bool "COMFAST CF-E316N v2 support"
select SOC_AR934X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
@ -1686,6 +1686,36 @@ config ATH79_MACH_CF_E316N_V2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E320N_V2
bool "COMFAST CF-E320N v2 support"
select SOC_QCA953X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E520N
bool "COMFAST CF-E520N support"
select SOC_QCA953X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E530N
bool "COMFAST CF-E530N support"
select SOC_QCA953X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_BHU_BXU2000N2_A
bool "BHU BXU2000n-2 rev. A support"
select SOC_AR934X

View file

@ -68,6 +68,9 @@ obj-$(CONFIG_ATH79_MACH_CAP324) += mach-cap324.o
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E320N_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o
obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o

View file

@ -1,9 +1,10 @@
/*
* COMFAST CF-E316N v2
* by Shenzhen Four Seas Global Link Network Technology Co., Ltd
*
* aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID)
* Support for COMFAST boards:
* - CF-E316N v2 (AR9341)
* - CF-E320N v2 (QCA9531)
* - CF-E520N/CF-E530N (QCA9531)
*
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
* Copyright (C) 2015 Paul Fertser <fercerpav@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
@ -27,72 +28,171 @@
#include "dev-usb.h"
#include "machtypes.h"
#define CF_EXXXN_KEYS_POLL_INTERVAL 20
#define CF_EXXXN_KEYS_DEBOUNCE_INTERVAL (3 * CF_EXXXN_KEYS_POLL_INTERVAL)
/* CF-E316N v2 */
#define CF_E316N_V2_GPIO_LED_DIAG_B 0
#define CF_E316N_V2_GPIO_LED_DIAG_R 2
#define CF_E316N_V2_GPIO_LED_DIAG_G 3
#define CF_E316N_V2_GPIO_LED_WLAN 12
#define CF_E316N_V2_GPIO_LED_WAN 17
#define CF_E316N_V2_GPIO_LED_LAN 19
#define CF_E316N_V2_GPIO_EXT_WDT 16
#define CF_E316N_V2_GPIO_EXTERNAL_PA0 13
#define CF_E316N_V2_GPIO_EXTERNAL_PA1 14
#define CF_E316N_V2_GPIO_BTN_RESET 20
static struct gpio_led cf_e316n_v2_leds_gpio[] __initdata = {
{
.name = "cf-e316n-v2:blue:diag",
.gpio = 0,
.gpio = CF_E316N_V2_GPIO_LED_DIAG_B,
.active_low = 0,
}, {
.name = "cf-e316n-v2:red:diag",
.gpio = 2,
.gpio = CF_E316N_V2_GPIO_LED_DIAG_R,
.active_low = 0,
}, {
.name = "cf-e316n-v2:green:diag",
.gpio = 3,
.gpio = CF_E316N_V2_GPIO_LED_DIAG_G,
.active_low = 0,
}, {
.name = "cf-e316n-v2:blue:wlan",
.gpio = 12,
.gpio = CF_E316N_V2_GPIO_LED_WLAN,
.active_low = 1,
}, {
.name = "cf-e316n-v2:blue:wan",
.gpio = 17,
.gpio = CF_E316N_V2_GPIO_LED_WAN,
.active_low = 1,
}, {
.name = "cf-e316n-v2:blue:lan",
.gpio = 19,
.gpio = CF_E316N_V2_GPIO_LED_LAN,
.active_low = 1,
},
};
static struct gpio_keys_button cf_e316n_v2_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = 60,
.gpio = 20,
.debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
.gpio = CF_E316N_V2_GPIO_BTN_RESET,
.active_low = 1,
},
};
/* There's a Pericon Technology PT7A7514 connected to GPIO 16 */
#define EXT_WATCHDOG_GPIO 16
/* CF-E320N v2 */
#define CF_E320N_V2_GPIO_LED_WLAN 0
#define CF_E320N_V2_GPIO_LED_WAN 2
#define CF_E320N_V2_GPIO_LED_LAN 3
#define CF_E320N_V2_GPIO_HEADER_J9_1 14
#define CF_E320N_V2_GPIO_HEADER_J9_2 12
#define CF_E320N_V2_GPIO_HEADER_J9_3 11
#define CF_E320N_V2_GPIO_HEADER_J9_4 16
#define CF_E320N_V2_GPIO_EXT_WDT 13
#define CF_E320N_V2_GPIO_BTN_RESET 17
static struct gpio_led cf_e320n_v2_leds_gpio[] __initdata = {
{
.name = "cf-e320n-v2:green:lan",
.gpio = CF_E320N_V2_GPIO_LED_LAN,
.active_low = 0,
}, {
.name = "cf-e320n-v2:red:wan",
.gpio = CF_E320N_V2_GPIO_LED_WAN,
.active_low = 0,
}, {
.name = "cf-e320n-v2:blue:wlan",
.gpio = CF_E320N_V2_GPIO_LED_WLAN,
.active_low = 0,
},
};
static struct gpio_keys_button cf_e320n_v2_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
.gpio = CF_E320N_V2_GPIO_BTN_RESET,
.active_low = 1,
},
};
/* CF-E520N/CF-E530N */
#define CF_E5X0N_GPIO_LED_WAN 11
#define CF_E5X0N_GPIO_BTN_RESET 17
static struct gpio_led cf_e520n_leds_gpio[] __initdata = {
{
.name = "cf-e520n:blue:wan",
.gpio = CF_E5X0N_GPIO_LED_WAN,
.active_low = 1,
}
};
static struct gpio_led cf_e530n_leds_gpio[] __initdata = {
{
.name = "cf-e530n:blue:wan",
.gpio = CF_E5X0N_GPIO_LED_WAN,
.active_low = 1,
}
};
/*
* Some COMFAST devices include external hardware watchdog chip,
* Pericon Technology PT7A7514, connected to a selected GPIO
* and WiSoC RESET_L input. Watchdog time-out is ~1.6 s.
*/
#define CF_EXXXN_EXT_WDT_TIMEOUT_MS 500
static struct timer_list gpio_wdt_timer;
static void gpio_wdt_toggle(unsigned long period)
static void gpio_wdt_toggle(unsigned long gpio)
{
static int state;
state = !state;
gpio_set_value(EXT_WATCHDOG_GPIO, state);
mod_timer(&gpio_wdt_timer, jiffies + period);
gpio_set_value(gpio, state);
mod_timer(&gpio_wdt_timer,
jiffies + msecs_to_jiffies(CF_EXXXN_EXT_WDT_TIMEOUT_MS));
}
static void __init cf_exxxn_common_setup(int gpio_wdt)
{
u8 *art = (u8 *) KSEG1ADDR(0x1f011000);
if (gpio_wdt > -1) {
gpio_request_one(gpio_wdt, GPIOF_OUT_INIT_HIGH,
"PT7A7514 watchdog");
setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, gpio_wdt);
gpio_wdt_toggle(gpio_wdt);
}
ath79_register_m25p80(NULL);
ath79_register_wmac(art, NULL);
ath79_register_usb();
}
static void __init cf_e316n_v2_setup(void)
{
u8 *maclan = (u8 *) KSEG1ADDR(0x1f010000);
u8 *macwlan = (u8 *) KSEG1ADDR(0x1f011002);
u8 *ee = (u8 *) KSEG1ADDR(0x1f011000);
u8 tmpmac[ETH_ALEN];
u8 *mac = (u8 *) KSEG1ADDR(0x1f010000);
gpio_request(EXT_WATCHDOG_GPIO, "PT7A7514 watchdog");
gpio_direction_output(EXT_WATCHDOG_GPIO, 0);
setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, msecs_to_jiffies(500));
gpio_wdt_toggle(msecs_to_jiffies(1));
ath79_register_m25p80(NULL);
cf_exxxn_common_setup(CF_E316N_V2_GPIO_EXT_WDT);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
ath79_register_mdio(1, 0x0);
/* GMAC0 is connected to the PHY0 of the internal switch */
@ -101,32 +201,129 @@ static void __init cf_e316n_v2_setup(void)
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
ath79_init_mac(ath79_eth0_data.mac_addr, maclan, 0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_register_eth(0);
/* GMAC1 is connected to the internal switch */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_init_mac(ath79_eth1_data.mac_addr, maclan, 2);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
ath79_register_eth(1);
/* Enable 2x Skyworks SE2576L WLAN power amplifiers */
gpio_request(13, "RF Amp 1");
gpio_direction_output(13, 1);
gpio_request(14, "RF Amp 2");
gpio_direction_output(14, 1);
ath79_init_mac(tmpmac, macwlan, 0);
ath79_register_wmac(ee, tmpmac);
gpio_request_one(CF_E316N_V2_GPIO_EXTERNAL_PA0, GPIOF_OUT_INIT_HIGH,
"WLAN PA0");
gpio_request_one(CF_E316N_V2_GPIO_EXTERNAL_PA1, GPIOF_OUT_INIT_HIGH,
"WLAN PA1");
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e316n_v2_leds_gpio),
cf_e316n_v2_leds_gpio);
ath79_register_gpio_keys_polled(1, 20,
ath79_register_gpio_keys_polled(1, CF_EXXXN_KEYS_POLL_INTERVAL,
ARRAY_SIZE(cf_e316n_v2_gpio_keys),
cf_e316n_v2_gpio_keys);
/* J1 is a High-Speed USB port, pin 1 is Vcc */
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_CF_E316N_V2, "CF-E316N-V2", "COMFAST CF-E316N v2",
cf_e316n_v2_setup);
static void __init cf_exxxn_qca953x_eth_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f010000);
ath79_setup_ar933x_phy4_switch(false, false);
ath79_register_mdio(0, 0x0);
ath79_switch_data.phy4_mii_en = 1;
ath79_switch_data.phy_poll_mask |= BIT(4);
/* LAN */
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
ath79_register_eth(1);
/* WAN */
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.phy_mask = BIT(4);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_register_eth(0);
}
static void __init cf_e320n_v2_setup(void)
{
cf_exxxn_common_setup(CF_E320N_V2_GPIO_EXT_WDT);
cf_exxxn_qca953x_eth_setup();
/* Disable JTAG (enables GPIO0-3) */
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_LAN, true);
ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_WAN, true);
ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_WLAN, true);
ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_LAN, 0);
ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_WAN, 0);
ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_WLAN, 0);
/* Enable GPIO function for GPIOs in J9 header */
ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_1, 0);
ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_2, 0);
ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_3, 0);
ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_4, 0);
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e320n_v2_leds_gpio),
cf_e320n_v2_leds_gpio);
ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
ARRAY_SIZE(cf_e320n_v2_gpio_keys),
cf_e320n_v2_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_CF_E320N_V2, "CF-E320N-V2", "COMFAST CF-E320N v2",
cf_e320n_v2_setup);
static void __init cf_e5x0n_gpio_setup(void)
{
ath79_gpio_direction_select(CF_E5X0N_GPIO_LED_WAN, true);
ath79_gpio_output_select(CF_E5X0N_GPIO_LED_WAN, 0);
ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
ARRAY_SIZE(cf_e320n_v2_gpio_keys),
cf_e320n_v2_gpio_keys);
}
static void __init cf_e520n_setup(void)
{
cf_exxxn_common_setup(-1);
cf_exxxn_qca953x_eth_setup();
cf_e5x0n_gpio_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e520n_leds_gpio),
cf_e520n_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_CF_E520N, "CF-E520N", "COMFAST CF-E520N",
cf_e520n_setup);
static void __init cf_e530n_setup(void)
{
cf_exxxn_common_setup(-1);
cf_exxxn_qca953x_eth_setup();
cf_e5x0n_gpio_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e530n_leds_gpio),
cf_e530n_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_CF_E530N, "CF-E530N", "COMFAST CF-E530N",
cf_e530n_setup);

View file

@ -53,6 +53,9 @@ enum ath79_mach_type {
ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
ATH79_MACH_CF_E320N_V2, /* COMFAST CF-E320N v2 */
ATH79_MACH_CF_E520N, /* COMFAST CF-E520N */
ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
ATH79_MACH_CPE210, /* TP-LINK CPE210 */
ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_CR3000, /* PowerCloud CR3000 */

View file

@ -23,10 +23,35 @@ define Device/cf-e316n-v2
BOARDNAME = CF-E316N-V2
IMAGE_SIZE = 16192k
CONSOLE = ttyS0,115200
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e316n-v2
define Device/cf-e320n-v2
$(Device/cf-e316n-v2)
DEVICE_TITLE := COMFAST CF-E320N v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME = CF-E320N-V2
endef
TARGET_DEVICES += cf-e320n-v2
define Device/cf-e520n
DEVICE_TITLE := COMFAST CF-E520N
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME = CF-E520N
IMAGE_SIZE = 8000k
CONSOLE = ttyS0,115200
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e520n
define Device/cf-e530n
$(Device/cf-e520n)
DEVICE_TITLE := COMFAST CF-E530N
BOARDNAME = CF-E530N
endef
TARGET_DEVICES += cf-e530n
define Device/domywifi-dw33d
DEVICE_TITLE := DomyWifi DW33D
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-ledtrig-usbdev kmod-ath10k