KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Put back some code from the 2.4 driver, supposed to boot network perfs

Browse source 
SVN-Revision: 8354
This commit is contained in:
Florian Fainelli 2007-08-06 18:40:28 +00:00
parent 2607706f31
commit 30af966213
1 changed files with 22 additions and 11 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

33
target/linux/rdc-2.6/files/drivers/net/r6040.c
View file

@ -861,18 +861,19 @@ for (i = 0; i < RX_DCNT; i++) {
outw(MAX_BUF_SIZE, ioaddr+0x18);
if ((lp->switch_sig = phy_read(ioaddr, 0, 2)) == 0x0243) // ICPlus IP175C Signature
{
phy_write(ioaddr, 29,31, 0x175C); //Enable registers
lp->phy_mode = 0x8000;
} else {
/* PHY Mode Check */
phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
{
phy_write(ioaddr, 29,31, 0x175C); //Enable registers
lp->phy_mode = 0x8000;
} else {
/* PHY Mode Check */
phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
if (PHY_MODE == 0x3100)
lp->phy_mode = phy_mode_chk(dev);
else lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
}
if (PHY_MODE == 0x3100)
lp->phy_mode = phy_mode_chk(dev);
else
lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
}
/* MAC Bus Control Register */
outw(MBCR_DEFAULT, ioaddr+0x8);
@ -880,6 +881,16 @@ for (i = 0; i < RX_DCNT; i++) {
lp->mcr0 |= lp->phy_mode;
outw(lp->mcr0, ioaddr);
/* set interrupt waiting time and packet numbers */
outw(0x0802, ioaddr + 0x0C);
outw(0x0802, ioaddr + 0x10);
/* upgrade performance (by RDC guys) */
phy_write(ioaddr,30,17,(phy_read(ioaddr,30,17)|0x4000)); //bit 14=1
phy_write(ioaddr,30,17,~((~phy_read(ioaddr,30,17))|0x2000)); //bit 13=0
phy_write(ioaddr,0,19,0x0000);
phy_write(ioaddr,0,30,0x01F0);
/* Interrupt Mask Register */
outw(R6040_INT_MASK, ioaddr + 0x40);
}