uqmi: redirect uqmi commands output to /dev/null

Move uqmi std and error output on commands without using them to /dev/null.
This will remove useless outputs in the syslog.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This commit is contained in:
Florian Eckert 2018-04-12 13:10:33 +02:00 committed by Koen Vandeputte
parent 692c6d9a5d
commit 2d57aa9c4c

View file

@ -90,7 +90,7 @@ proto_qmi_setup() {
mnc=${plmn:3}
echo "Setting PLMN to $plmn"
fi
uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" || {
uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev/null 2>&1 || {
echo "Unable to set PLMN"
proto_notify_error "$interface" PLMN_FAILED
proto_block_restart "$interface"
@ -99,11 +99,11 @@ proto_qmi_setup() {
}
# Cleanup current state if any
uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect
uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect > /dev/null 2>&1
# Set IP format
uqmi -s -d "$device" --set-data-format 802.3
uqmi -s -d "$device" --wda-set-data-format 802.3
uqmi -s -d "$device" --set-data-format 802.3 > /dev/null 2>&1
uqmi -s -d "$device" --wda-set-data-format 802.3 > /dev/null 2>&1
dataformat="$(uqmi -s -d "$device" --wda-get-data-format)"
if [ "$dataformat" = '"raw-ip"' ]; then
@ -117,7 +117,7 @@ proto_qmi_setup() {
echo "Y" > /sys/class/net/$ifname/qmi/raw_ip
fi
uqmi -s -d "$device" --sync
uqmi -s -d "$device" --sync > /dev/null 2>&1
echo "Waiting for network registration"
while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do
@ -125,7 +125,7 @@ proto_qmi_setup() {
sleep 5;
done
[ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes"
[ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1
echo "Starting network $interface"
@ -147,7 +147,7 @@ proto_qmi_setup() {
return 1
fi
uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null
uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null 2>&1
pdh_4=$(uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
--start-network \
@ -161,7 +161,7 @@ proto_qmi_setup() {
# pdh_4 is a numeric value on success
if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev/null; then
echo "Unable to connect IPv4"
uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds > /dev/null 2>&1
proto_notify_error "$interface" CALL_FAILED
return 1
fi
@ -170,7 +170,7 @@ proto_qmi_setup() {
connstat=$(uqmi -s -d "$device" --get-data-status)
[ "$connstat" == '"connected"' ] || {
echo "No data link!"
uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds > /dev/null 2>&1
proto_notify_error "$interface" CALL_FAILED
return 1
}
@ -184,7 +184,7 @@ proto_qmi_setup() {
return 1
fi
uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null
uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null 2>&1
pdh_6=$(uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
--start-network \
@ -198,7 +198,7 @@ proto_qmi_setup() {
# pdh_6 is a numeric value on success
if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev/null; then
echo "Unable to connect IPv6"
uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds > /dev/null 2>&1
proto_notify_error "$interface" CALL_FAILED
return 1
fi
@ -207,7 +207,7 @@ proto_qmi_setup() {
connstat=$(uqmi -s -d "$device" --get-data-status)
[ "$connstat" == '"connected"' ] || {
echo "No data link!"
uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds > /dev/null 2>&1
proto_notify_error "$interface" CALL_FAILED
return 1
}