From 2c9aff289e71689c07770efb2ce9e5f1b30960f2 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 27 Jun 2017 23:26:03 +0200 Subject: [PATCH] ar71xx: add support for Nokia WI2A-AC200i Specifications: - SoC: Qualcomm QCA9558 (720 MHz) - RAM: 256MB - Storage: 1MB NOR, 128 MB NAND flash - Ethernet: 1x1000M Installation: 1. Connect to serial console on the board 2. Boot initramfs image over u-boot 3. Copy image to the device and run sysupgrade Installation without serial console is not supported at this time Signed-off-by: Felix Fietkau --- .../ar71xx/base-files/etc/board.d/01_leds | 6 + .../ar71xx/base-files/etc/board.d/02_network | 1 + target/linux/ar71xx/base-files/etc/diag.sh | 6 + .../etc/hotplug.d/firmware/11-ath10k-caldata | 3 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + .../ar71xx/base-files/lib/upgrade/platform.sh | 19 ++ target/linux/ar71xx/config-4.4 | 1 + target/linux/ar71xx/config-4.9 | 1 + .../files/arch/mips/ath79/Kconfig.openwrt | 11 + .../ar71xx/files/arch/mips/ath79/Makefile | 1 + .../files/arch/mips/ath79/mach-wi2a-ac200i.c | 217 ++++++++++++++++++ .../ar71xx/files/arch/mips/ath79/machtypes.h | 1 + target/linux/ar71xx/image/nand.mk | 15 ++ target/linux/ar71xx/nand/config-default | 1 + 14 files changed, 286 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-wi2a-ac200i.c diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 80d195301b..0694fe954f 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -824,6 +824,12 @@ r6100) ucidef_set_led_usbdev "usb" "USB" "netgear:blue:usb" "1-1" ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy1tpt" ;; +wi2a-ac200i) + ucidef_set_led_default "power" "Power (green)" "nokia:green:power" "1" + ucidef_set_led_default "wan" "Ethernet LED (green)" "nokia:green:wan" "1" + ucidef_set_led_wlan "wlan5g" "WLAN" "nokia:green:wlan-5g" "phy0tpt" + ucidef_set_led_wlan "wlan2g" "WLAN" "nokia:green:wlan-2g" "phy1tpt" + ;; wndr3700v4|\ wndr4300) ucidef_set_led_switch "wan-green" "WAN (green)" "netgear:green:wan" "switch0" "0x20" "0x08" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index d83835204a..46b217136d 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -128,6 +128,7 @@ ar71xx_setup_interfaces() tl-wr902ac-v1|\ tube2h|\ unifiac-lite|\ + wi2a-ac200i|\ wndap360|\ wp543) ucidef_set_interface_lan "eth0" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index ade726f726..7fa4ff0bcc 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -459,6 +459,9 @@ get_status_led() { airgatewaypro) status_led="ubnt:white:status" ;; + wi2a-ac200i) + status_led="nokia:green:ctrl" + ;; whr-g301n|\ whr-hp-g300n|\ whr-hp-gn|\ @@ -529,6 +532,9 @@ set_state() { local n=$(fw_printenv activeregion | cut -d = -f 2) fw_setenv "image${n}trynum" 0 ;; + wi2a-ac200i) + fw_setenv PKRstCnt 0 + ;; esac ;; esac diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 85a2a63022..9a5f82b7cd 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -111,6 +111,9 @@ case "$FIRMWARE" in unifiac-pro) ath10kcal_extract "EEPROM" 20480 2116 ;; + wi2a-ac200i) + ath10kcal_extract "ART" 20480 2116 + ;; esac ;; "ath10k/cal-pci-0000:01:00.0.bin") diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 835ced67f3..929845110a 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -1231,6 +1231,9 @@ ar71xx_board_detect() { "WeIO"*) name="weio" ;; + *"WI2A-AC200i") + name="wi2a-ac200i" + ;; *"WHR-G301N") name="whr-g301n" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 778faeda5a..97d560189f 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -534,6 +534,7 @@ platform_check_image() { nbg6716|\ r6100|\ rambutan|\ + wi2a-ac200i|\ wndr3700v4|\ wndr4300) nand_do_platform_check $board $1 @@ -708,6 +709,7 @@ platform_pre_upgrade() { rb-2011uias-2hnd|\ rb-sxt2n|\ rb-sxt5n|\ + wi2a-ac200i|\ wndr3700v4|\ wndr4300) nand_do_upgrade "$1" @@ -743,6 +745,23 @@ platform_nand_pre_upgrade() { mtd erase kernel tar xf "$1" sysupgrade-routerboard/kernel -O | nandwrite -o "$fw_mtd" - ;; + wi2a-ac200i) + case "$(fw_printenv -n dualPartition)" in + imgA) + fw_setenv dualPartition imgB + fw_setenv ActImg NokiaImageB + ;; + imgB) + fw_setenv dualPartition imgA + fw_setenv ActImg NokiaImageA + ;; + esac + ubiblock -r /dev/ubiblock0_0 2>/dev/null >/dev/null + rm -f /dev/ubiblock0_0 + ubidetach -d 0 2>/dev/null >/dev/null + CI_UBIPART=ubi_alt + CI_KERNPART=kernel_alt + ;; esac } diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 0e77560414..4793bf4deb 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -223,6 +223,7 @@ CONFIG_ATH79_MACH_UBNT=y CONFIG_ATH79_MACH_UBNT_UNIFIAC=y CONFIG_ATH79_MACH_UBNT_XM=y CONFIG_ATH79_MACH_WEIO=y +# CONFIG_ATH79_MACH_WI2A_AC200I is not set CONFIG_ATH79_MACH_WHR_HP_G300N=y CONFIG_ATH79_MACH_WLAE_AG300N=y CONFIG_ATH79_MACH_WLR8100=y diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index c5b89088f1..84b2a0b72b 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -221,6 +221,7 @@ CONFIG_ATH79_MACH_UBNT=y CONFIG_ATH79_MACH_UBNT_UNIFIAC=y CONFIG_ATH79_MACH_UBNT_XM=y CONFIG_ATH79_MACH_WEIO=y +# CONFIG_ATH79_MACH_WI2A_AC200I is not set CONFIG_ATH79_MACH_WHR_HP_G300N=y CONFIG_ATH79_MACH_WLAE_AG300N=y CONFIG_ATH79_MACH_WLR8100=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 454aee6268..0b5bae6994 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -8,6 +8,17 @@ config ATH79_MACH_A60 select ATH79_DEV_WMAC select ATH79_DEV_USB +config ATH79_MACH_WI2A_AC200I + bool "Nokia WI2A-AC200i support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_NFC + select ATH79_DEV_WMAC + select ATH79_DEV_USB + config ATH79_MACH_ALFA_AP120C bool "ALFA Network AP120C board support" select ATH79_DEV_AP9X_PCI if PCI diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 0975aac8b3..a8d9ddad9c 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o # Machines # obj-$(CONFIG_ATH79_MACH_A60) += mach-a60.o +obj-$(CONFIG_ATH79_MACH_WI2A_AC200I) += mach-wi2a-ac200i.o obj-$(CONFIG_ATH79_MACH_ALFA_AP120C) += mach-alfa-ap120c.o obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wi2a-ac200i.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wi2a-ac200i.c new file mode 100644 index 0000000000..85e0c8fea3 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wi2a-ac200i.c @@ -0,0 +1,217 @@ +/* + * Nokia WI2A-AC200i support + * + * Copyright (c) 2012 Qualcomm Atheros + * Copyright (c) 2012-2013 Gabor Juhos + * Copyright (c) 2017 Felix Fietkau + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include +#include +#include + +#include +#include + +#include "common.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-eth.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-nfc.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define AC200I_GPIO_BTN_RESET 17 + +#define AC200I_KEYS_POLL_INTERVAL 20 /* msecs */ +#define AC200I_KEYS_DEBOUNCE_INTERVAL (3 * AC200I_KEYS_POLL_INTERVAL) + +#define AC200I_MAC_ADDR 0x1f040249 +#define AC200I_MAC1_OFFSET 6 +#define AC200I_WMAC_CALDATA_ADDR 0x1f061000 + +static struct gpio_led ac200i_leds_gpio[] __initdata = { + { + .name = "nokia:red:wlan-2g", + .gpio = 0, + .active_low = 1, + }, + { + .name = "nokia:green:power", + .gpio = 1, + .active_low = 1, + }, + { + .name = "nokia:green:wlan-2g", + .gpio = 2, + .active_low = 1, + }, + { + .name = "nokia:green:ctrl", + .gpio = 3, + .active_low = 1, + }, + { + .name = "nokia:green:eth", + .gpio = 4, + .active_low = 1, + }, + { + .name = "nokia:red:power", + .gpio = 13, + .active_low = 1, + }, + { + .name = "nokia:red:eth", + .gpio = 14, + .active_low = 1, + }, + { + .name = "nokia:red:wlan-5g", + .gpio = 18, + .active_low = 1, + }, + { + .name = "nokia:green:wlan-5g", + .gpio = 19, + .active_low = 1, + }, + { + .name = "nokia:red:ctrl", + .gpio = 20, + .active_low = 1, + }, +}; + +static struct gpio_keys_button ac200i_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = AC200I_KEYS_DEBOUNCE_INTERVAL, + .gpio = AC200I_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static struct mtd_partition ac200i_nand_partitions[] = { + { + .name = "cfg", + .offset = 0x0100000, + .size = 0x1800000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "kernel", + .offset = 0x2000000, + .size = 0x0400000, + }, + { + .name = "ubi", + .offset = 0x2400000, + .size = 0x2000000, + }, + { + .name = "kernel", + .offset = 0x5000000, + .size = 0x0400000, + }, + { + .name = "ubi", + .offset = 0x5400000, + .size = 0x2000000, + }, +}; + +static const char *boot_getenv(const char *key) +{ + const char *start = (const char *) KSEG1ADDR(0x1f070000); + const char *end = start + 0x20000; + const char *addr; + + for (addr = start + 4; + *addr && *addr != 0xff && addr < end && + strnlen(addr, end - addr) < end - addr; + addr += strnlen(addr, end - addr) + 1) { + const char *val; + + val = strchr(addr, '='); + if (!val) + continue; + + if (strncmp(addr, key, val - addr)) + continue; + + return val + 1; + } + return NULL; +} + +static void __init ac200i_setup(void) +{ + const char *img; + u8 *wmac = (u8 *) KSEG1ADDR(AC200I_WMAC_CALDATA_ADDR); + u8 *mac_addr = (u8 *) KSEG1ADDR(AC200I_MAC_ADDR); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ac200i_leds_gpio), + ac200i_leds_gpio); + ath79_register_gpio_keys_polled(-1, AC200I_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ac200i_gpio_keys), + ac200i_gpio_keys); + + ath79_register_usb(); + ath79_nfc_set_parts(ac200i_nand_partitions, + ARRAY_SIZE(ac200i_nand_partitions)); + ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW); + ath79_register_nfc(); + + ath79_register_wmac(wmac, NULL); + + ath79_register_mdio(0, 0x0); + ath79_init_mac(ath79_eth0_data.mac_addr, mac_addr, 0); + + /* GMAC0 is connected to the SGMII interface */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x03000101; + ath79_eth0_pll_data.pll_100 = 0x80000101; + ath79_eth0_pll_data.pll_10 = 0x80001313; + + img = boot_getenv("dualPartition"); + if (img && !strcmp(img, "imgA")) { + ac200i_nand_partitions[3].name = "kernel_alt"; + ac200i_nand_partitions[4].name = "ubi_alt"; + } else { + ac200i_nand_partitions[1].name = "kernel_alt"; + ac200i_nand_partitions[2].name = "ubi_alt"; + } + + ath79_register_eth(0); + + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_WI2A_AC200I, "WI2A-AC200i", + "Nokia WI2A-AC200i", + ac200i_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 756d406e11..c75ff4f88a 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -19,6 +19,7 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, ATH79_MACH_A40, /* OpenMesh A40 */ ATH79_MACH_A60, /* OpenMesh A60 */ + ATH79_MACH_WI2A_AC200I, /* Nokia WI2A-AC200i */ ATH79_MACH_ALFA_AP120C, /* ALFA Network AP120C board */ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */ diff --git a/target/linux/ar71xx/image/nand.mk b/target/linux/ar71xx/image/nand.mk index fafccb9b77..ba9e1ba622 100644 --- a/target/linux/ar71xx/image/nand.mk +++ b/target/linux/ar71xx/image/nand.mk @@ -84,6 +84,21 @@ define Device/rambutan endef TARGET_DEVICES += rambutan +define Device/wi2a-ac200i + SUPPORTED_DEVICES = $(1) + DEVICE_TITLE := Nokia WI2A-AC200i + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath9k kmod-ath10k ath10k-firmware-qca988x + BOARDNAME := WI2A-AC200i + BLOCKSIZE := 64k + KERNEL_SIZE := 3648k + IMAGE_SIZE := 32m + IMAGES := sysupgrade.tar + MTDPARTS := spi0.0:256k(u-boot)ro,64k(envFacA)ro,64k(envFacB)ro,64k(ART)ro,128k(u-boot-env) + KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma + IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += wi2a-ac200i + define Device/z1 DEVICE_TITLE := Meraki Z1 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-spi-gpio kmod-ath9k kmod-owl-loader diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index fc243c5008..340d64cab9 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -180,6 +180,7 @@ CONFIG_ATH79_MACH_RAMBUTAN=y # CONFIG_ATH79_MACH_UBNT_XM is not set # CONFIG_ATH79_MACH_WEIO is not set # CONFIG_ATH79_MACH_WHR_HP_G300N is not set +CONFIG_ATH79_MACH_WI2A_AC200I=y # CONFIG_ATH79_MACH_WLAE_AG300N is not set # CONFIG_ATH79_MACH_WLR8100 is not set # CONFIG_ATH79_MACH_WNDAP360 is not set