kirkwood: add support for Iomega Storcenter ix2-200
Iomega Storcenter ix2-200 is a dual SATA NAS powered by a Marvell Kirkwood SoC clocked at 1GHz. It has 256MB of RAM and 32MB of flash memory, 3x USB 2.0 and 1x 1Gbit/s NIC Specification: - SoC: Marvell Kirkwood 88F6281 - CPU/Speed: 1000Mhz - Flash-Chip: Hynix NAND - Flash size: 32 MiB,erase size:16 KiB,page size:512,OOB size:16 - RAM: 256MB - LAN: 1x 1000 Mbps Ethernet - WiFi: none - 3x USB 2.0 - UART: for serial console Installation instructions - easy steps: 1. download factory.bin and copy into tftp server 2. access uboot environment with serial cable and run ``` setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.13 tftpboot 0x00800000 factory.bin nand erase 0x100000 $(filesize) nand write 0x00800000 0x100000 $(filesize) run bootcmd ``` 3. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13) Installation steps nand bad blocks proof: 1. download initramfs-uImage and copy into usb ext2 partition ``` mkfs.ext2 -L ext2 /dev/sdh1 mount -t ext2 /dev/sdh1 /mnt cp initramfs-uImage /mnt/initramfs.bin umount /mnt ``` 2. access uboot environment with serial cable and run ``` setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv usb reset; ext2load usb 0:1 0x00800000 /initramfs.bin; bootm 0x00800000 ``` 3. log into openwrt and sysupgrade to install into flash ``` sysupgrade -n /tmp/sysupgrade.bin ``` 4. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13) Signed-off-by: Ademar Arvati Filho <arvati@hotmail.com>
This commit is contained in:
parent
26dbf79f49
commit
27b2f0fc0f
8 changed files with 98 additions and 5 deletions
|
@ -15,6 +15,7 @@ board=$(board_name)
|
|||
case "$board" in
|
||||
cloudengines,pogoe02|\
|
||||
cloudengines,pogoplugv4|\
|
||||
iom,ix2-200|\
|
||||
linksys,viper|\
|
||||
raidsonic,ib-nas62x0|\
|
||||
seagate,dockstar|\
|
||||
|
|
|
@ -14,6 +14,9 @@ case "$board" in
|
|||
ucidef_set_led_default "health" "health" "pogo_e02:green:health" "1"
|
||||
ucidef_set_led_default "fault" "fault" "pogo_e02:orange:fault" "1"
|
||||
;;
|
||||
"iom,ix2-200")
|
||||
ucidef_set_led_timer "health" "health" "status:white:rebuild_led" "200" "800"
|
||||
;;
|
||||
"linksys,audi")
|
||||
ucidef_set_led_default "power" "power" "audi:green:power" "1"
|
||||
;;
|
||||
|
|
|
@ -17,6 +17,7 @@ case "$board" in
|
|||
"cloudengines,pogoe02"|\
|
||||
"cloudengines,pogoplugv4"|\
|
||||
"iom,iconnect-1.1"|\
|
||||
"iom,ix2-200"|\
|
||||
"raidsonic,ib-nas62x0"|\
|
||||
"seagate,dockstar"|\
|
||||
"seagate,goflexhome"|\
|
||||
|
|
|
@ -15,6 +15,9 @@ get_status_led() {
|
|||
cloudengines,pogoplugv4)
|
||||
status_led="pogoplugv4:green:health"
|
||||
;;
|
||||
iom,ix2-200)
|
||||
status_led="status:white:power_led"
|
||||
;;
|
||||
linksys,audi)
|
||||
status_led="audi:green:power"
|
||||
;;
|
||||
|
|
|
@ -4,17 +4,20 @@ START=98
|
|||
boot() {
|
||||
. /lib/functions.sh
|
||||
|
||||
#configuring lm85 onboard temp/fan controller to run the fan on its own
|
||||
#configuring (lm85/lm63) onboard temp/fan controller to run the fan on its own
|
||||
#for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
|
||||
|
||||
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
|
||||
|
||||
case $(board_name) in
|
||||
zyxel,nsa310b)
|
||||
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
|
||||
echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1
|
||||
echo 1 > "$path_to_hwmon/pwm1_auto_channels" # temp1 is the only one that changes
|
||||
echo 23000 > "$path_to_hwmon/temp1_auto_temp_min"
|
||||
echo 43000 > "$path_to_hwmon/temp1_auto_temp_max" # next step is 49600 millicelsius, or 50 celsius, 43 celsius is better
|
||||
;;
|
||||
iom,ix2-200)
|
||||
path_to_hwmon='/sys/class/hwmon/hwmon0'
|
||||
echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1
|
||||
;;
|
||||
esac
|
||||
}
|
|
@ -62,6 +62,22 @@ define Device/iom_iconnect-1.1
|
|||
endef
|
||||
TARGET_DEVICES += iom_iconnect-1.1
|
||||
|
||||
define Device/iom_ix2_200
|
||||
DEVICE_TITLE := Iomega StorCenter ix2-200
|
||||
DEVICE_DTS := kirkwood-iomega_ix2_200
|
||||
DEVICE_PACKAGES += kmod-gpio-button-hotplug kmod-i2c-mv64xxx kmod-hwmon-lm63
|
||||
DEVICE_TYPE:=nas
|
||||
PAGESIZE := 512
|
||||
SUBPAGESIZE := 256
|
||||
BLOCKSIZE := 16KiB
|
||||
KERNEL_SIZE := 3072k
|
||||
KERNEL_IN_UBI := 0
|
||||
UBINIZE_OPTS := -E 5
|
||||
IMAGE_SIZE := 32505856
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
|
||||
endef
|
||||
TARGET_DEVICES += iom_ix2_200
|
||||
|
||||
define Device/linksys_audi
|
||||
DEVICE_TITLE := Linksys EA3500 (Audi)
|
||||
DEVICE_PACKAGES := kmod-mwl8k swconfig wpad-mini kmod-gpio-button-hotplug
|
||||
|
|
33
target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch
Normal file
33
target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch
Normal file
|
@ -0,0 +1,33 @@
|
|||
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
|
||||
@@ -185,18 +185,18 @@
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
- label = "env";
|
||||
+ label = "u-boot environment";
|
||||
reg = <0xa0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "uImage";
|
||||
+ label = "kernel";
|
||||
reg = <0x100000 0x300000>;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
- label = "rootfs";
|
||||
+ label = "ubi";
|
||||
reg = <0x400000 0x1C00000>;
|
||||
};
|
||||
};
|
||||
@@ -210,7 +210,7 @@
|
||||
};
|
||||
|
||||
ð0 {
|
||||
- status = "okay";
|
||||
+ status = "disabled";
|
||||
ethernet0-port@0 {
|
||||
speed = <1000>;
|
||||
duplex = <1>;
|
33
target/linux/kirkwood/patches-4.9/103-iomega-ix2-200.patch
Normal file
33
target/linux/kirkwood/patches-4.9/103-iomega-ix2-200.patch
Normal file
|
@ -0,0 +1,33 @@
|
|||
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
|
||||
@@ -185,18 +185,18 @@
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
- label = "env";
|
||||
+ label = "u-boot environment";
|
||||
reg = <0xa0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "uImage";
|
||||
+ label = "kernel";
|
||||
reg = <0x100000 0x300000>;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
- label = "rootfs";
|
||||
+ label = "ubi";
|
||||
reg = <0x400000 0x1C00000>;
|
||||
};
|
||||
};
|
||||
@@ -210,7 +210,7 @@
|
||||
};
|
||||
|
||||
ð0 {
|
||||
- status = "okay";
|
||||
+ status = "disabled";
|
||||
ethernet0-port@0 {
|
||||
speed = <1000>;
|
||||
duplex = <1>;
|
Loading…
Reference in a new issue