rt2x00: merge an rt2800 initialization order fix

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37922
This commit is contained in:
Felix Fietkau 2013-09-09 17:31:53 +00:00
parent e6d015489b
commit 247299bfa0
7 changed files with 62 additions and 36 deletions

View file

@ -2983,7 +2983,7 @@
*init dbgp flags before all
--- a/drivers/net/wireless/rtlwifi/ps.c
+++ b/drivers/net/wireless/rtlwifi/ps.c
@@ -269,6 +269,7 @@ void rtl_ips_nic_on(struct ieee80211_hw
@@ -269,6 +269,7 @@ void rtl_ips_nic_on(struct ieee80211_hw
spin_unlock_irqrestore(&rtlpriv->locks.ips_lock, flags);
}

View file

@ -2727,7 +2727,33 @@ Contains the following changes from wireless-testing/master-2013-08-26:
case RT5390:
rt2800_init_rfcsr_5390(rt2x00dev);
break;
@@ -5456,15 +6711,15 @@ int rt2800_enable_radio(struct rt2x00_de
@@ -5404,19 +6659,20 @@ int rt2800_enable_radio(struct rt2x00_de
rt2800_init_registers(rt2x00dev)))
return -EIO;
+ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev)))
+ return -EIO;
+
/*
* Send signal to firmware during boot time.
*/
rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
- if (rt2x00_is_usb(rt2x00dev)) {
+ if (rt2x00_is_usb(rt2x00dev))
rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
- rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
- }
+ rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
msleep(1);
- if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev) ||
- rt2800_wait_bbp_ready(rt2x00dev)))
+ if (unlikely(rt2800_wait_bbp_ready(rt2x00dev)))
return -EIO;
rt2800_init_bbp(rt2x00dev);
@@ -5456,15 +6712,15 @@ int rt2800_enable_radio(struct rt2x00_de
/*
* Initialize LED control
*/
@ -2746,7 +2772,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
rt2800_mcu_request(rt2x00dev, MCU_LED_LED_POLARITY, 0xff,
word & 0xff, (word >> 8) & 0xff);
@@ -5560,6 +6815,34 @@ int rt2800_read_eeprom_efuse(struct rt2x
@@ -5560,6 +6816,34 @@ int rt2800_read_eeprom_efuse(struct rt2x
}
EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
@ -2781,7 +2807,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
{
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
@@ -5578,18 +6861,18 @@ static int rt2800_validate_eeprom(struct
@@ -5578,18 +6862,18 @@ static int rt2800_validate_eeprom(struct
/*
* Start validation of the data that has been read.
*/
@ -2803,7 +2829,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
} else if (rt2x00_rt(rt2x00dev, RT2860) ||
rt2x00_rt(rt2x00dev, RT2872)) {
@@ -5598,10 +6881,10 @@ static int rt2800_validate_eeprom(struct
@@ -5598,10 +6882,10 @@ static int rt2800_validate_eeprom(struct
*/
if (rt2x00_get_field16(word, EEPROM_NIC_CONF0_RXPATH) > 2)
rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2);
@ -2816,7 +2842,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
if (word == 0xffff) {
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_HW_RADIO, 0);
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC, 0);
@@ -5618,24 +6901,24 @@ static int rt2800_validate_eeprom(struct
@@ -5618,24 +6902,24 @@ static int rt2800_validate_eeprom(struct
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_INTERNAL_TX_ALC, 0);
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BT_COEXIST, 0);
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_DAC_TEST, 0);
@ -2848,7 +2874,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
rt2x00_eeprom_dbg(rt2x00dev, "Led Mode: 0x%04x\n", word);
}
@@ -5644,56 +6927,61 @@ static int rt2800_validate_eeprom(struct
@@ -5644,56 +6928,61 @@ static int rt2800_validate_eeprom(struct
* lna0 as correct value. Note that EEPROM_LNA
* is never validated.
*/
@ -2941,7 +2967,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
return 0;
}
@@ -5707,7 +6995,7 @@ static int rt2800_init_eeprom(struct rt2
@@ -5707,7 +6996,7 @@ static int rt2800_init_eeprom(struct rt2
/*
* Read EEPROM word for configuration.
*/
@ -2950,7 +2976,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
/*
* Identify RF chipset by EEPROM value
@@ -5717,7 +7005,7 @@ static int rt2800_init_eeprom(struct rt2
@@ -5717,7 +7006,7 @@ static int rt2800_init_eeprom(struct rt2
if (rt2x00_rt(rt2x00dev, RT3290) ||
rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
@ -2959,7 +2985,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
else
rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
@@ -5731,6 +7019,7 @@ static int rt2800_init_eeprom(struct rt2
@@ -5731,6 +7020,7 @@ static int rt2800_init_eeprom(struct rt2
case RF3021:
case RF3022:
case RF3052:
@ -2967,7 +2993,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
case RF3290:
case RF3320:
case RF3322:
@@ -5757,7 +7046,7 @@ static int rt2800_init_eeprom(struct rt2
@@ -5757,7 +7047,7 @@ static int rt2800_init_eeprom(struct rt2
rt2x00dev->default_ant.rx_chain_num =
rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH);
@ -2976,7 +3002,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
if (rt2x00_rt(rt2x00dev, RT3070) ||
rt2x00_rt(rt2x00dev, RT3090) ||
@@ -5810,7 +7099,7 @@ static int rt2800_init_eeprom(struct rt2
@@ -5810,7 +7100,7 @@ static int rt2800_init_eeprom(struct rt2
/*
* Read frequency offset and RF programming sequence.
*/
@ -2985,7 +3011,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
/*
@@ -5827,7 +7116,7 @@ static int rt2800_init_eeprom(struct rt2
@@ -5827,7 +7117,7 @@ static int rt2800_init_eeprom(struct rt2
/*
* Check if support EIRP tx power limit feature.
*/
@ -2994,7 +3020,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
if (rt2x00_get_field16(eeprom, EEPROM_EIRP_MAX_TX_POWER_2GHZ) <
EIRP_MAX_TX_POWER_LIMIT)
@@ -6109,12 +7398,79 @@ static const struct rf_channel rf_vals_5
@@ -6109,12 +7399,79 @@ static const struct rf_channel rf_vals_5
{196, 83, 0, 12, 1},
};
@ -3074,7 +3100,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
unsigned int i;
u16 eeprom;
u32 reg;
@@ -6149,7 +7505,7 @@ static int rt2800_probe_hw_mode(struct r
@@ -6149,7 +7506,7 @@ static int rt2800_probe_hw_mode(struct r
SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
@ -3083,7 +3109,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
EEPROM_MAC_ADDR_0));
/*
@@ -6165,7 +7521,7 @@ static int rt2800_probe_hw_mode(struct r
@@ -6165,7 +7522,7 @@ static int rt2800_probe_hw_mode(struct r
rt2x00dev->hw->max_report_rates = 7;
rt2x00dev->hw->max_rate_tries = 1;
@ -3092,7 +3118,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
/*
* Initialize hw_mode information.
@@ -6200,6 +7556,10 @@ static int rt2800_probe_hw_mode(struct r
@@ -6200,6 +7557,10 @@ static int rt2800_probe_hw_mode(struct r
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_3x);
spec->channels = rf_vals_3x;
@ -3103,7 +3129,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
} else if (rt2x00_rf(rt2x00dev, RF5592)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
@@ -6265,21 +7625,40 @@ static int rt2800_probe_hw_mode(struct r
@@ -6265,21 +7626,40 @@ static int rt2800_probe_hw_mode(struct r
spec->channels_info = info;
@ -3148,7 +3174,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
}
}
@@ -6290,6 +7669,7 @@ static int rt2800_probe_hw_mode(struct r
@@ -6290,6 +7670,7 @@ static int rt2800_probe_hw_mode(struct r
case RF3022:
case RF3320:
case RF3052:
@ -3156,7 +3182,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
case RF3290:
case RF5360:
case RF5370:
@@ -6328,6 +7708,7 @@ static int rt2800_probe_rt(struct rt2x00
@@ -6328,6 +7709,7 @@ static int rt2800_probe_rt(struct rt2x00
case RT3352:
case RT3390:
case RT3572:

View file

@ -110,7 +110,7 @@
rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
@@ -7003,6 +7029,7 @@ static int rt2800_init_eeprom(struct rt2
@@ -7004,6 +7030,7 @@ static int rt2800_init_eeprom(struct rt2
* RT53xx: defined in "EEPROM_CHIP_ID" field
*/
if (rt2x00_rt(rt2x00dev, RT3290) ||
@ -118,7 +118,7 @@
rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
@@ -7093,7 +7120,8 @@ static int rt2800_init_eeprom(struct rt2
@@ -7094,7 +7121,8 @@ static int rt2800_init_eeprom(struct rt2
/*
* Detect if this device has Bluetooth co-existence.
*/
@ -128,7 +128,7 @@
__set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags);
/*
@@ -7122,6 +7150,22 @@ static int rt2800_init_eeprom(struct rt2
@@ -7123,6 +7151,22 @@ static int rt2800_init_eeprom(struct rt2
EIRP_MAX_TX_POWER_LIMIT)
__set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags);

View file

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -7508,6 +7508,27 @@ static const struct rf_channel rf_vals_3
@@ -7509,6 +7509,27 @@ static const struct rf_channel rf_vals_3
{173, 0x61, 0, 9},
};
@ -28,7 +28,7 @@
static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
@@ -7588,7 +7609,6 @@ static int rt2800_probe_hw_mode(struct r
@@ -7589,7 +7610,6 @@ static int rt2800_probe_hw_mode(struct r
rt2x00_rf(rt2x00dev, RF3022) ||
rt2x00_rf(rt2x00dev, RF3290) ||
rt2x00_rf(rt2x00dev, RF3320) ||
@ -36,7 +36,7 @@
rt2x00_rf(rt2x00dev, RF5360) ||
rt2x00_rf(rt2x00dev, RF5370) ||
rt2x00_rf(rt2x00dev, RF5372) ||
@@ -7596,6 +7616,12 @@ static int rt2800_probe_hw_mode(struct r
@@ -7597,6 +7617,12 @@ static int rt2800_probe_hw_mode(struct r
rt2x00_rf(rt2x00dev, RF5392)) {
spec->num_channels = 14;
spec->channels = rf_vals_3x;
@ -49,7 +49,7 @@
} else if (rt2x00_rf(rt2x00dev, RF3052)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_3x);
@@ -7768,6 +7794,19 @@ static int rt2800_probe_rt(struct rt2x00
@@ -7769,6 +7795,19 @@ static int rt2800_probe_rt(struct rt2x00
return 0;
}
@ -69,7 +69,7 @@
int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
@@ -7797,6 +7836,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r
@@ -7798,6 +7837,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r
rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
/*

View file

@ -8,7 +8,7 @@
#include "rt2x00.h"
#include "rt2800lib.h"
@@ -7796,13 +7797,14 @@ static int rt2800_probe_rt(struct rt2x00
@@ -7797,13 +7798,14 @@ static int rt2800_probe_rt(struct rt2x00
int rt2800_probe_clk(struct rt2x00_dev *rt2x00dev)
{

View file

@ -212,7 +212,7 @@
case RT5390:
rt2800_init_rfcsr_5390(rt2x00dev);
break;
@@ -6901,6 +7005,12 @@ static int rt2800_validate_eeprom(struct
@@ -6902,6 +7006,12 @@ static int rt2800_validate_eeprom(struct
rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820);
rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
@ -225,7 +225,7 @@
} else if (rt2x00_rt(rt2x00dev, RT2860) ||
rt2x00_rt(rt2x00dev, RT2872)) {
/*
@@ -7034,6 +7144,8 @@ static int rt2800_init_eeprom(struct rt2
@@ -7035,6 +7145,8 @@ static int rt2800_init_eeprom(struct rt2
rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
@ -234,7 +234,7 @@
else
rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
@@ -7051,6 +7163,7 @@ static int rt2800_init_eeprom(struct rt2
@@ -7052,6 +7164,7 @@ static int rt2800_init_eeprom(struct rt2
case RF3290:
case RF3320:
case RF3322:
@ -242,7 +242,7 @@
case RF5360:
case RF5370:
case RF5372:
@@ -7617,7 +7730,8 @@ static int rt2800_probe_hw_mode(struct r
@@ -7618,7 +7731,8 @@ static int rt2800_probe_hw_mode(struct r
rt2x00_rf(rt2x00dev, RF5392)) {
spec->num_channels = 14;
spec->channels = rf_vals_3x;
@ -252,7 +252,7 @@
spec->num_channels = 14;
if (spec->clk_is_20mhz)
spec->channels = rf_vals_xtal20mhz_3x;
@@ -7742,6 +7856,7 @@ static int rt2800_probe_hw_mode(struct r
@@ -7743,6 +7857,7 @@ static int rt2800_probe_hw_mode(struct r
case RF3052:
case RF3053:
case RF3290:
@ -260,7 +260,7 @@
case RF5360:
case RF5370:
case RF5372:
@@ -7780,6 +7895,7 @@ static int rt2800_probe_rt(struct rt2x00
@@ -7781,6 +7896,7 @@ static int rt2800_probe_rt(struct rt2x00
case RT3390:
case RT3572:
case RT3593:

View file

@ -8,7 +8,7 @@
#include "rt2x00.h"
#include "rt2800lib.h"
@@ -7252,6 +7253,17 @@ static int rt2800_init_eeprom(struct rt2
@@ -7253,6 +7254,17 @@ static int rt2800_init_eeprom(struct rt2
rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);