cns3xxx: update to linux 3.14

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43397

target/linux/cns3xxx/Makefile

@@ -14,7 +14,7 @@ CPU_TYPE:=mpcore
 CPU_SUBTYPE:=vfp
 MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
 
-KERNEL_PATCHVER:=3.10
+KERNEL_PATCHVER:=3.14
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/cns3xxx/config-3.14

@@ -4,21 +4,25 @@ CONFIG_ARCH_CNS3XXX=y
 CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
 CONFIG_ARCH_HAS_TICK_BROADCAST=y
 CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
 CONFIG_ARCH_MULTIPLATFORM=y
 # CONFIG_ARCH_MULTI_CPU_AUTO is not set
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_MULTI_V6_V7=y
-# CONFIG_ARCH_MULTI_V7 is not set
 # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
 CONFIG_ARCH_NR_GPIO=0
+# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 # CONFIG_ARCH_WM8750 is not set
 CONFIG_ARM=y
-# CONFIG_ARM_APPENDED_DTB is not set
 # CONFIG_ARM_CPU_SUSPEND is not set
 CONFIG_ARM_GIC=y
 CONFIG_ARM_L1_CACHE_SHIFT=5
@@ -31,9 +35,9 @@ CONFIG_ATAGS=y
 CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_BLK_DEV_SD=y
+CONFIG_BROADCOM_PHY=y
 CONFIG_CACHE_L2X0=y
 CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_OF=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CNS3XXX_ETH=y
 CONFIG_COMMON_CLK=y
@@ -55,10 +59,9 @@ CONFIG_CPU_V6=y
 CONFIG_CPU_V6K=y
 CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_CNS3XXX=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_UART_8250 is not set
-CONFIG_DEBUG_LL_INCLUDE="debug/cns3xxx.S"
+# CONFIG_DEBUG_UART_PL01X is not set
-CONFIG_DEBUG_UNCOMPRESS=y
 # CONFIG_DEBUG_USER is not set
 CONFIG_DMA_CACHE_FIQ_BROADCAST=y
 CONFIG_DTC=y
@@ -66,7 +69,6 @@ CONFIG_DTC=y
 # CONFIG_DWC_DEVICE_ONLY is not set
 # CONFIG_DWC_HOST_ONLY is not set
 CONFIG_DWC_OTG_MODE=y
-CONFIG_EARLY_PRINTK=y
 CONFIG_EEPROM_AT24=y
 CONFIG_FIQ=y
 CONFIG_FRAME_POINTER=y
@@ -79,7 +81,9 @@ CONFIG_GENERIC_IDLE_POLL_SETUP=y
 CONFIG_GENERIC_IO=y
 CONFIG_GENERIC_IRQ_CHIP=y
 CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
 CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
@@ -99,9 +103,9 @@ CONFIG_HAVE_ARCH_PFN_VALID=y
 CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
 # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
 CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_CLK_PREPARE=y
 CONFIG_HAVE_CONTEXT_TRACKING=y
@@ -111,14 +115,15 @@ CONFIG_HAVE_DMA_API_DEBUG=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_DMA_CONTIGUOUS=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
 CONFIG_HAVE_IDE=y
 CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
 CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
 CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_HAVE_KERNEL_XZ=y
@@ -126,27 +131,31 @@ CONFIG_HAVE_MEMBLOCK=y
 CONFIG_HAVE_NET_DSA=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
 CONFIG_HAVE_PROC_CPU=y
 CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
 CONFIG_HAVE_SMP=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
 CONFIG_HWMON=y
 CONFIG_HW_RANDOM=m
+CONFIG_HZ_FIXED=0
 CONFIG_HZ_PERIODIC=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_CNS3XXX=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
 CONFIG_IRQCHIP=y
 CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_WORK=y
 CONFIG_KTIME_SCALAR=y
 CONFIG_LEDS_GPIO=y
 # CONFIG_LEDS_TRIGGER_NETDEV is not set
-CONFIG_LOCAL_TIMERS=y
-CONFIG_M25PXX_USE_FAST_READ=y
 # CONFIG_MACH_CNS3420VB is not set
 CONFIG_MACH_GW2388=y
 CONFIG_MDIO_BOARDINFO=y
@@ -160,7 +169,6 @@ CONFIG_MMC_SDHCI_CNS3XXX=y
 CONFIG_MMC_SDHCI_PLTFM=y
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MPCORE_WATCHDOG=y
 CONFIG_MTD_M25P80=y
 # CONFIG_MTD_OF_PARTS is not set
 CONFIG_MTD_PHYSMAP=y
@@ -168,17 +176,17 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MULTI_IRQ_HANDLER=y
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_FLOW_LIMIT=y
 CONFIG_NET_VENDOR_CAVIUM=y
 CONFIG_NLS=y
+CONFIG_NO_BOOTMEM=y
 CONFIG_NR_CPUS=2
 CONFIG_NTP_PPS=y
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
 CONFIG_OF_EARLY_FLATTREE=y
 CONFIG_OF_FLATTREE=y
 CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
 CONFIG_OF_IRQ=y
 CONFIG_OF_MDIO=y
 CONFIG_OF_MTD=y
@@ -227,16 +235,14 @@ CONFIG_SPI_CNS3XXX=y
 CONFIG_SPI_MASTER=y
 # CONFIG_STAGING is not set
 CONFIG_STOP_MACHINE=y
+CONFIG_SWIOTLB=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_TEGRA_HOST1X is not set
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_TREE_RCU=y
 CONFIG_UID16=y
-CONFIG_UIDGID_CONVERTED=y
 CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_ARCH_HAS_XHCI=y
 CONFIG_USB_CNS3XXX_EHCI=y
 CONFIG_USB_CNS3XXX_OHCI=y
 CONFIG_USB_COMMON=y
@@ -246,13 +252,10 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_EHCI_PCI=y
 # CONFIG_USB_ETH is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_UHCI_HCD is not set
-CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_USE_OF=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_VFP=y

target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c

@@ -31,8 +31,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/leds.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/if_ether.h>

target/linux/cns3xxx/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/include/asm/glue-cache.h
 +++ b/arch/arm/include/asm/glue-cache.h
-@@ -129,11 +129,19 @@
+@@ -156,11 +156,19 @@ extern inline void nop_dma_unmap_area(co
  #define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
  #define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
  #define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
@@ -22,7 +22,7 @@
  #endif
 --- a/arch/arm/mm/Kconfig
 +++ b/arch/arm/mm/Kconfig
-@@ -823,6 +823,17 @@ config DMA_CACHE_RWFO
+@@ -843,6 +843,17 @@ config DMA_CACHE_RWFO
  	  in hardware, other workarounds are needed (e.g. cache
  	  maintenance broadcasting in software via FIQ).
  
@@ -42,15 +42,23 @@
  
 --- a/arch/arm/mm/flush.c
 +++ b/arch/arm/mm/flush.c
-@@ -286,7 +286,10 @@ void flush_dcache_page(struct page *page
+@@ -281,6 +281,7 @@ void __sync_icache_dcache(pte_t pteval)
+ void flush_dcache_page(struct page *page)
+ {
+ 	struct address_space *mapping;
++	bool skip_broadcast = true;
+ 
+ 	/*
+ 	 * The zero page is never written to, so never has any dirty
+@@ -291,7 +292,10 @@ void flush_dcache_page(struct page *page
  
  	mapping = page_mapping(page);
  
 -	if (!cache_ops_need_broadcast() &&
-+	if (
 +#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+		!cache_ops_need_broadcast() &&
++	skip_broadcast = !cache_ops_need_broadcast();
 +#endif
- 	    mapping && !mapping_mapped(mapping))
++	if (skip_broadcast &&
+ 	    mapping && !page_mapped(page))
  		clear_bit(PG_dcache_clean, &page->flags);
  	else {

target/linux/cns3xxx/patches-3.14/025-smp_support.patch

@@ -20,9 +20,9 @@
  
 --- a/arch/arm/mach-cns3xxx/core.h
 +++ b/arch/arm/mach-cns3xxx/core.h
-@@ -11,6 +11,7 @@
+@@ -13,6 +13,7 @@
- #ifndef __CNS3XXX_CORE_H
+ 
- #define __CNS3XXX_CORE_H
+ #include <linux/reboot.h>
  
 +extern struct smp_operations cns3xxx_smp_ops;
  extern void cns3xxx_timer_init(void);

target/linux/cns3xxx/patches-3.14/040-fiq_support.patch

@@ -29,7 +29,7 @@
   */
 --- a/arch/arm/mm/Kconfig
 +++ b/arch/arm/mm/Kconfig
-@@ -806,7 +806,7 @@ config KUSER_HELPERS
+@@ -826,7 +826,7 @@ config KUSER_HELPERS
  
  config DMA_CACHE_RWFO
  	bool "Enable read/write for ownership DMA cache maintenance"

target/linux/cns3xxx/patches-3.14/065-pcie_early_init.patch

@@ -24,7 +24,7 @@
  	.nr_irqs	= NR_IRQS_CNS3XXX,
 --- a/arch/arm/mach-cns3xxx/core.h
 +++ b/arch/arm/mach-cns3xxx/core.h
-@@ -13,6 +13,7 @@
+@@ -15,6 +15,7 @@
  
  extern struct smp_operations cns3xxx_smp_ops;
  extern void cns3xxx_timer_init(void);
@@ -32,13 +32,13 @@
  
  #ifdef CONFIG_CACHE_L2X0
  void __init cns3xxx_l2x0_init(void);
-@@ -22,6 +23,7 @@ static inline void cns3xxx_l2x0_init(voi
+@@ -24,6 +25,7 @@ static inline void cns3xxx_l2x0_init(voi
  
  void __init cns3xxx_map_io(void);
  void __init cns3xxx_init_irq(void);
 +int  __init cns3xxx_pcie_init(void);
  void cns3xxx_power_off(void);
- void cns3xxx_restart(char, const char *);
+ void cns3xxx_restart(enum reboot_mode, const char *);
  
 --- a/arch/arm/mach-cns3xxx/pcie.c
 +++ b/arch/arm/mach-cns3xxx/pcie.c

target/linux/cns3xxx/patches-3.14/070-i2c_support.patch

@@ -1,6 +1,6 @@
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -375,6 +375,18 @@ config I2C_CBUS_GPIO
+@@ -386,6 +386,18 @@ config I2C_CBUS_GPIO
  	  This driver can also be built as a module.  If so, the module
  	  will be called i2c-cbus-gpio.
  
@@ -18,10 +18,10 @@
 +
  config I2C_CPM
  	tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
- 	depends on (CPM1 || CPM2) && OF_I2C
+ 	depends on CPM1 || CPM2
 --- a/drivers/i2c/busses/Makefile
 +++ b/drivers/i2c/busses/Makefile
-@@ -89,6 +89,7 @@ obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
+@@ -95,6 +95,7 @@ obj-$(CONFIG_I2C_BCM_KONA)	+= i2c-bcm-ko
  obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
  obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
  obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o

target/linux/cns3xxx/patches-3.14/075-spi_support.patch

@@ -1,6 +1,6 @@
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -142,6 +142,13 @@ config SPI_CLPS711X
+@@ -155,6 +155,13 @@ config SPI_CLPS711X
  	  This enables dedicated general purpose SPI/Microwire1-compatible
  	  master mode interface (SSI1) for CLPS711X-based CPUs.
  
@@ -16,7 +16,7 @@
  	depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x)
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_SPI_BFIN5XX)		+= spi-bfin5x
+@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_BFIN_V3)               
  obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
  obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
  obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o
@@ -26,22 +26,20 @@
  obj-$(CONFIG_SPI_DAVINCI)		+= spi-davinci.o
 --- a/drivers/spi/spi-bitbang.c
 +++ b/drivers/spi/spi-bitbang.c
-@@ -328,6 +328,12 @@ static void bitbang_work(struct work_str
+@@ -333,6 +333,10 @@ static int spi_bitbang_transfer_one(stru
- 				 */
+ 			 */
- 				if (!m->is_dma_mapped)
+ 			if (!m->is_dma_mapped)
- 					t->rx_dma = t->tx_dma = 0;
+ 				t->rx_dma = t->tx_dma = 0;
 +
-+				if (t->transfer_list.next == &m->transfers)
++			t->last_in_message_list =
-+					t->last_in_message_list = 1;
++				list_is_last(&t->transfer_list, &m->transfers);
-+				else
-+					t->last_in_message_list = 0;
 +
- 				status = bitbang->txrx_bufs(spi, t);
+ 			status = bitbang->txrx_bufs(spi, t);
- 			}
+ 		}
- 			if (status > 0)
+ 		if (status > 0)
 --- a/include/linux/spi/spi.h
 +++ b/include/linux/spi/spi.h
-@@ -524,6 +524,13 @@ struct spi_transfer {
+@@ -591,6 +591,13 @@ struct spi_transfer {
  	u32		speed_hz;
  
  	struct list_head transfer_list;

target/linux/cns3xxx/patches-3.14/080-sata_support.patch

@@ -29,7 +29,7 @@
  		/* sentinel */
  	}
  };
-@@ -80,6 +84,12 @@ static const struct ata_port_info ahci_p
+@@ -81,6 +85,12 @@ static const struct ata_port_info ahci_p
  		.udma_mask	= ATA_UDMA6,
  		.port_ops	= &ahci_platform_ops,
  	},

target/linux/cns3xxx/patches-3.14/085-ethernet_support.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/ethernet/Kconfig
 +++ b/drivers/net/ethernet/Kconfig
-@@ -32,6 +32,7 @@ source "drivers/net/ethernet/calxeda/Kco
+@@ -34,6 +34,7 @@ source "drivers/net/ethernet/calxeda/Kco
  source "drivers/net/ethernet/chelsio/Kconfig"
  source "drivers/net/ethernet/cirrus/Kconfig"
  source "drivers/net/ethernet/cisco/Kconfig"
@@ -10,7 +10,7 @@
  config DNET
 --- a/drivers/net/ethernet/Makefile
 +++ b/drivers/net/ethernet/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_NET_BFIN) += adi/
+@@ -17,6 +17,7 @@ obj-$(CONFIG_NET_BFIN) += adi/
  obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
  obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
  obj-$(CONFIG_NET_CALXEDA_XGMAC) += calxeda/

target/linux/cns3xxx/patches-3.14/095-gpio_support.patch

@@ -13,7 +13,7 @@
  }
 --- a/arch/arm/mach-cns3xxx/core.h
 +++ b/arch/arm/mach-cns3xxx/core.h
-@@ -15,12 +15,6 @@ extern struct smp_operations cns3xxx_smp
+@@ -17,12 +17,6 @@ extern struct smp_operations cns3xxx_smp
  extern void cns3xxx_timer_init(void);
  extern void cns3xxx_pcie_iotable_init(void);
  

target/linux/cns3xxx/patches-3.14/200-dwc_otg_support.patch

@@ -1,6 +1,6 @@
 --- a/drivers/usb/Kconfig
 +++ b/drivers/usb/Kconfig
-@@ -136,6 +136,8 @@ source "drivers/usb/musb/Kconfig"
+@@ -96,6 +96,8 @@ source "drivers/usb/host/Kconfig"
  
  source "drivers/usb/renesas_usbhs/Kconfig"
  
@@ -26,7 +26,7 @@
  
 --- a/include/linux/usb.h
 +++ b/include/linux/usb.h
-@@ -1404,6 +1404,9 @@ struct urb {
+@@ -1431,6 +1431,9 @@ struct urb {
  	unsigned int transfer_flags;	/* (in) URB_SHORT_NOT_OK | ...*/
  	void *transfer_buffer;		/* (in) associated data buffer */
  	dma_addr_t transfer_dma;	/* (in) dma addr for transfer_buffer */
@@ -38,10 +38,10 @@
  	int num_sgs;			/* (in) number of entries in the sg list */
 --- a/drivers/usb/Makefile
 +++ b/drivers/usb/Makefile
-@@ -7,6 +7,7 @@
+@@ -8,6 +8,7 @@ obj-$(CONFIG_USB)		+= core/
- obj-$(CONFIG_USB)		+= core/
  
  obj-$(CONFIG_USB_DWC3)		+= dwc3/
+ obj-$(CONFIG_USB_DWC2)		+= dwc2/
 +obj-$(CONFIG_USB_DWC_OTG)	+= dwc/
  
  obj-$(CONFIG_USB_MON)		+= mon/

target/linux/cns3xxx/patches-3.14/310-pci_isolated_interrupts.patch

@@ -11,14 +11,14 @@
  
 --- a/arch/arm/mach-cns3xxx/core.h
 +++ b/arch/arm/mach-cns3xxx/core.h
-@@ -17,7 +17,7 @@ extern void cns3xxx_pcie_iotable_init(vo
+@@ -19,7 +19,7 @@ extern void cns3xxx_pcie_iotable_init(vo
  
  void __init cns3xxx_map_io(void);
  void __init cns3xxx_init_irq(void);
 -int  __init cns3xxx_pcie_init(void);
 +int  __init cns3xxx_pcie_init(int *pcie0_irqs, int *pcie1_irqs);
  void cns3xxx_power_off(void);
- void cns3xxx_restart(char, const char *);
+ void cns3xxx_restart(enum reboot_mode, const char *);
  
 --- a/arch/arm/mach-cns3xxx/laguna.c
 +++ b/arch/arm/mach-cns3xxx/laguna.c
@@ -30,7 +30,7 @@
  #include <linux/gpio.h>
  #include <linux/dma-mapping.h>
  #include <linux/serial_core.h>
-@@ -869,12 +870,42 @@ static int laguna_register_gpio(struct g
+@@ -868,12 +869,42 @@ static int laguna_register_gpio(struct g
  	return ret;
  }
  
@@ -74,7 +74,7 @@
  }
  subsys_initcall(laguna_pcie_init);
  
-@@ -889,8 +923,33 @@ static int __init laguna_model_setup(voi
+@@ -888,8 +919,33 @@ static int __init laguna_model_setup(voi
  	printk("Running on Gateworks Laguna %s\n", laguna_info.model);
  	cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA,
  		NR_IRQS_CNS3XXX);

target/linux/cns3xxx/patches-3.14/400-broadcom_phy_reinit.patch

@@ -0,0 +1,14 @@
+--- a/drivers/net/phy/broadcom.c
++++ b/drivers/net/phy/broadcom.c
+@@ -567,6 +567,11 @@ static int bcm5481_config_aneg(struct ph
+ 		/* Write bits 14:0. */
+ 		reg |= (1 << 15);
+ 		phy_write(phydev, 0x18, reg);
++	} else {
++		phy_write(phydev, 0x18, 0xf1e7);
++		phy_write(phydev, 0x1c, 0x8e00);
++
++		phy_write(phydev, 0x1c, 0xa41f);
+ 	}
+ 
+ 	return ret;