Upgrade wpa_supplicant to 0.6.3 and add some improvements (mainly for roaming with ap_scan=1) Remove arch specific config files (they seem rather pointless) Remove the dependency on OpenSSL (use small built-in SSL functions)

SVN-Revision: 11833
This commit is contained in:
Felix Fietkau 2008-07-15 01:40:55 +00:00
parent 89eb716470
commit 1fc2cf08a6
15 changed files with 662 additions and 1386 deletions

View file

@ -9,7 +9,7 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=wpa_supplicant
PKG_VERSION:=0.5.10
PKG_VERSION:=0.6.3
PKG_RELEASE:=1
PKG_MD5SUM:=9e7b99da67c47d81121368c6d580d069
@ -17,11 +17,11 @@ PKG_SOURCE_URL:=http://hostap.epitest.fi/releases
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
include $(INCLUDE_DIR)/package.mk
STAMP_CONFIGURED:=$(STAMP_CONFIGURED)_$(call confvar,CONFIG_PACKAGE_kmod-madwifi CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK)
define Package/wpa-supplicant
SECTION:=net
CATEGORY:=Network
DEPENDS:=+libopenssl
TITLE:=WPA Supplicant
URL:=http://hostap.epitest.fi/wpa_supplicant/
endef
@ -30,6 +30,17 @@ define Package/wpa-supplicant/Description
WPA Supplicant
endef
define Package/wpa-supplicant/config
config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
bool "Disable timestamp check"
depends PACKAGE_wpa-supplicant
default n
help
This disables the timestamp check for certificates in wpa_supplicant
Useful for devices without RTC that cannot reliably get the real date/time
endef
define Package/wpa-cli
SECTION:=net
CATEGORY:=Network
@ -38,31 +49,35 @@ define Package/wpa-cli
endef
define Package/wpa-cli/Description
WPA Supplicant control utility
endef
CONFIG=$(firstword $(wildcard ./files/config.$(BOARD) ./files/config.$(ARCH) ./config))
TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/madwifi $(if $(CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK),-DNO_TIMESTAMP_CHECK)
define Build/Configure
cp ./files/config.$(ARCH) $(PKG_BUILD_DIR)/.config
cp $(CONFIG) $(PKG_BUILD_DIR)/wpa_supplicant/.config
$(if $(CONFIG_PACKAGE_kmod-madwifi),,$(SED) 's,^CONFIG_DRIVER_MADWIFI,#CONFIG_DRIVER_MADWIFI,g' $(PKG_BUILD_DIR)/wpa_supplicant/.config)
endef
define Build/Compile
rm -rf $(PKG_INSTALL_DIR)
mkdir -p $(PKG_INSTALL_DIR)
CFLAGS="$(TARGET_CFLAGS)" \
$(MAKE) -C $(PKG_BUILD_DIR) \
$(MAKE) -C $(PKG_BUILD_DIR)/wpa_supplicant \
CC="$(TARGET_CC)" \
KERNEL=$(LINUX_DIR) \
CPPFLAGS="$(TARGET_CPPFLAGS)" \
LDFLAGS="$(TARGET_LDFLAGS)" \
all
$(STRIP) $(PKG_BUILD_DIR)/wpa_supplicant
$(STRIP) $(PKG_BUILD_DIR)/wpa_cli
endef
define Package/wpa-supplicant/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/wpa_{supplicant,passphrase} $(1)/usr/sbin/
$(CP) \
$(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant \
$(PKG_BUILD_DIR)/wpa_supplicant/wpa_passphrase \
$(1)/usr/sbin/
endef
define Package/wpa-cli/install

View file

@ -0,0 +1,362 @@
# Example wpa_supplicant build time configuration
#
# This file lists the configuration options that are used when building the
# hostapd binary. All lines starting with # are ignored. Configuration option
# lines must be commented out complete, if they are not to be included, i.e.,
# just setting VARIABLE=n is not disabling that variable.
#
# This file is included in Makefile, so variables like CFLAGS and LIBS can also
# be modified from here. In most cases, these lines should use += in order not
# to override previous values of the variables.
# Uncomment following two lines and fix the paths if you have installed OpenSSL
# or GnuTLS in non-default location
#CFLAGS += -I/usr/local/openssl/include
#LIBS += -L/usr/local/openssl/lib
# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
# the kerberos files are not in the default include path. Following line can be
# used to fix build issues on such systems (krb5.h not found).
#CFLAGS += -I/usr/include/kerberos
# Example configuration for various cross-compilation platforms
#### sveasoft (e.g., for Linksys WRT54G) ######################################
#CC=mipsel-uclibc-gcc
#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
#CFLAGS += -Os
#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
###############################################################################
#### openwrt (e.g., for Linksys WRT54G) #######################################
#CC=mipsel-uclibc-gcc
#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
#CFLAGS += -Os
#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
# -I../WRT54GS/release/src/include
#LIBS = -lssl
###############################################################################
# Driver interface for Host AP driver
# CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for madwifi driver
CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
#CFLAGS += -I../madwifi/wpa
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
#CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
#CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
#CFLAGS += -I/opt/WRT54GS/release/src/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
# Driver interface for Ralink driver
#CONFIG_DRIVER_RALINK=y
# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# By default, driver_ndis uses WinPcap for low-level operations. This can be
# replaced with the following option which replaces WinPcap calls with NDISUIO.
# However, this requires that WZC is disabled (net stop wzcsvc) before starting
# wpa_supplicant.
# CONFIG_USE_NDISUIO=y
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-FAST
# Note: Default OpenSSL package does not include support for all the
# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
# to add the needed functions.
#CONFIG_EAP_FAST=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
#CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-PAX
#CONFIG_EAP_PAX=y
# LEAP
CONFIG_EAP_LEAP=y
# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y
# EAP-SAKE
#CONFIG_EAP_SAKE=y
# EAP-GPSK
#CONFIG_EAP_GPSK=y
# Include support for optional SHA256 cipher suite in EAP-GPSK
#CONFIG_EAP_GPSK_SHA256=y
# EAP-TNC and related Trusted Network Connect support (experimental)
#CONFIG_EAP_TNC=y
# EAP-IKEv2
#CONFIG_EAP_IKEV2=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
#CONFIG_SMARTCARD=y
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
# Development testing
#CONFIG_EAPOL_TEST=y
# Select control interface backend for external programs, e.g, wpa_cli:
# unix = UNIX domain sockets (default for Linux/*BSD)
# udp = UDP sockets using localhost (127.0.0.1)
# named_pipe = Windows Named Pipe (default for Windows)
# y = use default (backwards compatibility)
# If this option is commented out, control interface is not included in the
# build.
CONFIG_CTRL_IFACE=y
# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y
# Remove debugging code that is printing out debug message to stdout.
# This can be used to reduce the size of the wpa_supplicant considerably
# if debugging code is not needed. The size reduction can be around 35%
# (e.g., 90 kB).
#CONFIG_NO_STDOUT_DEBUG=y
# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
# 35-50 kB in code size.
#CONFIG_NO_WPA=y
# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
# save about 1 kB in code size when building only WPA-Personal (no EAP support)
# or 6 kB if building for WPA-Enterprise.
#CONFIG_NO_WPA2=y
# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
# This option can be used to reduce code size by removing support for
# converting ASCII passphrases into PSK. If this functionality is removed, the
# PSK can only be configured as the 64-octet hexstring (e.g., from
# wpa_passphrase). This saves about 0.5 kB in code size.
#CONFIG_NO_WPA_PASSPHRASE=y
# Remove AES extra functions. This can be used to reduce code size by about
# 1.5 kB by removing extra AES modes that are not needed for commonly used
# client configurations (they are needed for some EAP types).
#CONFIG_NO_AES_EXTRAS=y
# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
# This can be used if ap_scan=1 mode is never enabled.
#CONFIG_NO_SCAN_PROCESSING=y
# Select configuration backend:
# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
# path is given on command line, not here; this option is just used to
# select the backend that allows configuration files to be used)
# winreg = Windows registry (see win_example.reg for an example)
CONFIG_BACKEND=file
# Remove configuration write functionality (i.e., to allow the configuration
# file to be updated based on runtime configuration changes). The runtime
# configuration can still be changed, the changes are just not going to be
# persistent over restarts. This option can be used to reduce code size by
# about 3.5 kB.
CONFIG_NO_CONFIG_WRITE=y
# Remove support for configuration blobs to reduce code size by about 1.5 kB.
#CONFIG_NO_CONFIG_BLOBS=y
# Select program entry point implementation:
# main = UNIX/POSIX like main() function (default)
# main_winsvc = Windows service (read parameters from registry)
# main_none = Very basic example (development use only)
CONFIG_MAIN=main
# Select wrapper for operatins system and C library specific functions
# unix = UNIX/POSIX like systems (default)
# win32 = Windows systems
# none = Empty template
CONFIG_OS=unix
# Select event loop implementation
# eloop = select() loop (default)
# eloop_win = Windows events and WaitForMultipleObject() loop
# eloop_none = Empty template
CONFIG_ELOOP=eloop
# Select layer 2 packet implementation
# linux = Linux packet socket (default)
# pcap = libpcap/libdnet/WinPcap
# freebsd = FreeBSD libpcap
# winpcap = WinPcap with receive thread
# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
# none = Empty template
CONFIG_L2_PACKET=linux
# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
CONFIG_PEERKEY=y
# IEEE 802.11w (management frame protection)
# This version is an experimental implementation based on IEEE 802.11w/D1.0
# draft and is subject to change since the standard has not yet been finalized.
# Driver support is also needed for IEEE 802.11w.
#CONFIG_IEEE80211W=y
# Select TLS implementation
# openssl = OpenSSL (default)
# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
# internal = Internal TLSv1 implementation (experimental)
# none = Empty template
CONFIG_TLS=internal
# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
# even though the core GnuTLS library is released under LGPL, this extra
# library uses GPL and as such, the terms of GPL apply to the combination
# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
# apply for distribution of the resulting binary.
#CONFIG_GNUTLS_EXTRA=y
# If CONFIG_TLS=internal is used, additional library and include paths are
# needed for LibTomMath. Alternatively, an integrated, minimal version of
# LibTomMath can be used. See beginning of libtommath.c for details on benefits
# and drawbacks of this option.
CONFIG_INTERNAL_LIBTOMMATH=y
#ifndef CONFIG_INTERNAL_LIBTOMMATH
#LTM_PATH=/usr/src/libtommath-0.39
#CFLAGS += -I$(LTM_PATH)
#LIBS += -L$(LTM_PATH)
#LIBS_p += -L$(LTM_PATH)
#endif
# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
# This is only for Windows builds and requires WMI-related header files and
# WbemUuid.Lib from Platform SDK even when building with MinGW.
#CONFIG_NDIS_EVENTS_INTEGRATED=y
#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
# Add support for DBus control interface
#CONFIG_CTRL_IFACE_DBUS=y
# Add support for loading EAP methods dynamically as shared libraries.
# When this option is enabled, each EAP method can be either included
# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
# be loaded in the beginning of the wpa_supplicant configuration file
# (see load_dynamic_eap parameter in the example file) before being used in
# the network blocks.
#
# Note that some shared parts of EAP methods are included in the main program
# and in order to be able to use dynamic EAP methods using these parts, the
# main program must have been build with the EAP method enabled (=y or =dyn).
# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
# unless at least one of them was included in the main build to force inclusion
# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
# in the main build to be able to load these methods dynamically.
#
# Please also note that using dynamic libraries will increase the total binary
# size. Thus, it may not be the best option for targets that have limited
# amount of memory/flash.
#CONFIG_DYNAMIC_EAP_METHODS=y
# Include client MLME (management frame processing).
# This can be used to move MLME processing of Devicescape IEEE 802.11 stack
# into user space.
#CONFIG_CLIENT_MLME=y
# Currently, driver_devicescape.c build requires some additional parameters
# to be able to include some of the kernel header files. Following lines can
# be used to set these (WIRELESS_DEV must point to the root directory of the
# wireless-dev.git tree).
#WIRELESS_DEV=/usr/src/wireless-dev
#CFLAGS += -I$(WIRELESS_DEV)/net/mac80211
# IEEE 802.11r/D4.1 (Fast BSS Transition)
# This enables an experimental implementation of a draft version of
# IEEE 802.11r. This draft is still subject to change, so it should be noted
# that this version may not comply with the final standard.
#CONFIG_IEEE80211R=y
# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
CONFIG_DEBUG_FILE=y
# Enable privilege separation (see README 'Privilege separation' for details)
#CONFIG_PRIVSEP=y

View file

@ -1,139 +0,0 @@
# Driver interface for Host AP driver
#CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
#CFLAGS += -I../madwifi/wpa
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
#CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
# CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
# CFLAGS += -I../nvram/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5 (automatically included if EAP-TTLS is enabled)
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-PAX
#CONFIG_EAP_PAX=y
# LEAP
CONFIG_EAP_LEAP=y
# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
CONFIG_SMARTCARD=y
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
# Development testing
#CONFIG_EAPOL_TEST=y
# Replace native Linux implementation of packet sockets with libdnet/libpcap.
# This will be automatically set for non-Linux OS.
#CONFIG_DNET_PCAP=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y
# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y
# Remove debugging code that is printing out debug message to stdout.
# This can be used to reduce the size of the wpa_supplicant considerably
# if debugging code is not needed. The size reduction can be around 35%
# (e.g., 90 kB).
#CONFIG_NO_STDOUT_DEBUG=y
# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
# 35-50 kB in code size.
#CONFIG_NO_WPA=y
# Select configuration backend:
# file = text file (e.g., wpa_supplicant.conf)
CONFIG_BACKEND=file

View file

@ -1,139 +0,0 @@
# Driver interface for Host AP driver
#CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
#CFLAGS += -I../madwifi/wpa
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
#CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
# CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
# CFLAGS += -I../nvram/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5 (automatically included if EAP-TTLS is enabled)
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-PAX
#CONFIG_EAP_PAX=y
# LEAP
CONFIG_EAP_LEAP=y
# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
CONFIG_SMARTCARD=y
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
# Development testing
#CONFIG_EAPOL_TEST=y
# Replace native Linux implementation of packet sockets with libdnet/libpcap.
# This will be automatically set for non-Linux OS.
#CONFIG_DNET_PCAP=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y
# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y
# Remove debugging code that is printing out debug message to stdout.
# This can be used to reduce the size of the wpa_supplicant considerably
# if debugging code is not needed. The size reduction can be around 35%
# (e.g., 90 kB).
#CONFIG_NO_STDOUT_DEBUG=y
# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
# 35-50 kB in code size.
#CONFIG_NO_WPA=y
# Select configuration backend:
# file = text file (e.g., wpa_supplicant.conf)
CONFIG_BACKEND=file

View file

@ -1,139 +0,0 @@
# Driver interface for Host AP driver
#CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
#CFLAGS += -I../madwifi/wpa
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
#CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
# CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
# CFLAGS += -I../nvram/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5 (automatically included if EAP-TTLS is enabled)
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-PAX
#CONFIG_EAP_PAX=y
# LEAP
CONFIG_EAP_LEAP=y
# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
CONFIG_SMARTCARD=y
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
# Development testing
#CONFIG_EAPOL_TEST=y
# Replace native Linux implementation of packet sockets with libdnet/libpcap.
# This will be automatically set for non-Linux OS.
#CONFIG_DNET_PCAP=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y
# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y
# Remove debugging code that is printing out debug message to stdout.
# This can be used to reduce the size of the wpa_supplicant considerably
# if debugging code is not needed. The size reduction can be around 35%
# (e.g., 90 kB).
#CONFIG_NO_STDOUT_DEBUG=y
# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
# 35-50 kB in code size.
#CONFIG_NO_WPA=y
# Select configuration backend:
# file = text file (e.g., wpa_supplicant.conf)
CONFIG_BACKEND=file

View file

@ -1,139 +0,0 @@
# Driver interface for Host AP driver
#CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
#CFLAGS += -I../madwifi/wpa
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
#CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
# CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
# CFLAGS += -I../nvram/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5 (automatically included if EAP-TTLS is enabled)
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-PAX
#CONFIG_EAP_PAX=y
# LEAP
CONFIG_EAP_LEAP=y
# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
CONFIG_SMARTCARD=y
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
# Development testing
#CONFIG_EAPOL_TEST=y
# Replace native Linux implementation of packet sockets with libdnet/libpcap.
# This will be automatically set for non-Linux OS.
#CONFIG_DNET_PCAP=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y
# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y
# Remove debugging code that is printing out debug message to stdout.
# This can be used to reduce the size of the wpa_supplicant considerably
# if debugging code is not needed. The size reduction can be around 35%
# (e.g., 90 kB).
#CONFIG_NO_STDOUT_DEBUG=y
# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
# 35-50 kB in code size.
#CONFIG_NO_WPA=y
# Select configuration backend:
# file = text file (e.g., wpa_supplicant.conf)
CONFIG_BACKEND=file

View file

@ -1,181 +0,0 @@
# Example wpa_supplicant build time configuration
#
# This file lists the configuration options that are used when building the
# hostapd binary. All lines starting with # are ignored. Configuration option
# lines must be commented out complete, if they are not to be included, i.e.,
# just setting VARIABLE=n is not disabling that variable.
#
# This file is included in Makefile, so variables like CFLAGS and LIBS can also
# be modified from here. In most cases, these lines should use += in order not
# to override previous values of the variables.
# Uncomment following two lines and fix the paths if you have installed openssl
# in non-default location
#CFLAGS += -I/usr/local/openssl/include
#LIBS += -L/usr/local/openssl/lib
# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
# the kerberos files are not in the default include path. Following line can be
# used to fix build issues on such systems (krb5.h not found).
#CFLAGS += -I/usr/include/kerberos
# Example configuration for various cross-compilation platforms
#### sveasoft (e.g., for Linksys WRT54G) ######################################
#CC=mipsel-uclibc-gcc
#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
#CFLAGS += -Os
#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
###############################################################################
#### openwrt (e.g., for Linksys WRT54G) #######################################
#CC=mipsel-uclibc-gcc
#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
#CFLAGS += -Os
#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
# -I../WRT54GS/release/src/include
#LIBS = -lssl
###############################################################################
# Driver interface for Host AP driver
CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
#CFLAGS += -I../madwifi/wpa
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
#CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
#CFLAGS += -I/opt/WRT54GS/release/src/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5 (automatically included if EAP-TTLS is enabled)
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-PAX
#CONFIG_EAP_PAX=y
# LEAP
CONFIG_EAP_LEAP=y
# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
CONFIG_SMARTCARD=y
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
# Development testing
#CONFIG_EAPOL_TEST=y
# Replace native Linux implementation of packet sockets with libdnet/libpcap.
# This will be automatically set for non-Linux OS.
#CONFIG_DNET_PCAP=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y
# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y
# Remove debugging code that is printing out debug message to stdout.
# This can be used to reduce the size of the wpa_supplicant considerably
# if debugging code is not needed. The size reduction can be around 35%
# (e.g., 90 kB).
#CONFIG_NO_STDOUT_DEBUG=y
# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
# 35-50 kB in code size.
#CONFIG_NO_WPA=y
# Select configuration backend:
# file = text file (e.g., wpa_supplicant.conf)
CONFIG_BACKEND=file

View file

@ -1,181 +0,0 @@
# Example wpa_supplicant build time configuration
#
# This file lists the configuration options that are used when building the
# hostapd binary. All lines starting with # are ignored. Configuration option
# lines must be commented out complete, if they are not to be included, i.e.,
# just setting VARIABLE=n is not disabling that variable.
#
# This file is included in Makefile, so variables like CFLAGS and LIBS can also
# be modified from here. In most cases, these lines should use += in order not
# to override previous values of the variables.
# Uncomment following two lines and fix the paths if you have installed openssl
# in non-default location
#CFLAGS += -I/usr/local/openssl/include
#LIBS += -L/usr/local/openssl/lib
# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
# the kerberos files are not in the default include path. Following line can be
# used to fix build issues on such systems (krb5.h not found).
#CFLAGS += -I/usr/include/kerberos
# Example configuration for various cross-compilation platforms
#### sveasoft (e.g., for Linksys WRT54G) ######################################
#CC=mipsel-uclibc-gcc
#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
#CFLAGS += -Os
#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
###############################################################################
#### openwrt (e.g., for Linksys WRT54G) #######################################
#CC=mipsel-uclibc-gcc
#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
#CFLAGS += -Os
#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
# -I../WRT54GS/release/src/include
#LIBS = -lssl
###############################################################################
# Driver interface for Host AP driver
CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
#CFLAGS += -I../madwifi/wpa
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
#CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
#CFLAGS += -I/opt/WRT54GS/release/src/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5 (automatically included if EAP-TTLS is enabled)
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-PAX
#CONFIG_EAP_PAX=y
# LEAP
CONFIG_EAP_LEAP=y
# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
CONFIG_SMARTCARD=y
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
# Development testing
#CONFIG_EAPOL_TEST=y
# Replace native Linux implementation of packet sockets with libdnet/libpcap.
# This will be automatically set for non-Linux OS.
#CONFIG_DNET_PCAP=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y
# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y
# Remove debugging code that is printing out debug message to stdout.
# This can be used to reduce the size of the wpa_supplicant considerably
# if debugging code is not needed. The size reduction can be around 35%
# (e.g., 90 kB).
#CONFIG_NO_STDOUT_DEBUG=y
# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
# 35-50 kB in code size.
#CONFIG_NO_WPA=y
# Select configuration backend:
# file = text file (e.g., wpa_supplicant.conf)
CONFIG_BACKEND=file

View file

@ -1,139 +0,0 @@
# Driver interface for Host AP driver
#CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
#CFLAGS += -I../madwifi/wpa
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
#CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
# CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
# CFLAGS += -I../nvram/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5 (automatically included if EAP-TTLS is enabled)
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-PAX
#CONFIG_EAP_PAX=y
# LEAP
CONFIG_EAP_LEAP=y
# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
CONFIG_SMARTCARD=y
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
# Development testing
#CONFIG_EAPOL_TEST=y
# Replace native Linux implementation of packet sockets with libdnet/libpcap.
# This will be automatically set for non-Linux OS.
#CONFIG_DNET_PCAP=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y
# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y
# Remove debugging code that is printing out debug message to stdout.
# This can be used to reduce the size of the wpa_supplicant considerably
# if debugging code is not needed. The size reduction can be around 35%
# (e.g., 90 kB).
#CONFIG_NO_STDOUT_DEBUG=y
# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
# 35-50 kB in code size.
#CONFIG_NO_WPA=y
# Select configuration backend:
# file = text file (e.g., wpa_supplicant.conf)
CONFIG_BACKEND=file

View file

@ -1,139 +0,0 @@
# Driver interface for Host AP driver
#CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
#CFLAGS += -I../madwifi/wpa
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
#CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
# CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
# CFLAGS += -I../nvram/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5 (automatically included if EAP-TTLS is enabled)
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-PAX
#CONFIG_EAP_PAX=y
# LEAP
CONFIG_EAP_LEAP=y
# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
CONFIG_SMARTCARD=y
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
# Development testing
#CONFIG_EAPOL_TEST=y
# Replace native Linux implementation of packet sockets with libdnet/libpcap.
# This will be automatically set for non-Linux OS.
#CONFIG_DNET_PCAP=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y
# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y
# Remove debugging code that is printing out debug message to stdout.
# This can be used to reduce the size of the wpa_supplicant considerably
# if debugging code is not needed. The size reduction can be around 35%
# (e.g., 90 kB).
#CONFIG_NO_STDOUT_DEBUG=y
# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
# 35-50 kB in code size.
#CONFIG_NO_WPA=y
# Select configuration backend:
# file = text file (e.g., wpa_supplicant.conf)
CONFIG_BACKEND=file

View file

@ -1,181 +0,0 @@
# Example wpa_supplicant build time configuration
#
# This file lists the configuration options that are used when building the
# hostapd binary. All lines starting with # are ignored. Configuration option
# lines must be commented out complete, if they are not to be included, i.e.,
# just setting VARIABLE=n is not disabling that variable.
#
# This file is included in Makefile, so variables like CFLAGS and LIBS can also
# be modified from here. In most cases, these lines should use += in order not
# to override previous values of the variables.
# Uncomment following two lines and fix the paths if you have installed openssl
# in non-default location
#CFLAGS += -I/usr/local/openssl/include
#LIBS += -L/usr/local/openssl/lib
# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
# the kerberos files are not in the default include path. Following line can be
# used to fix build issues on such systems (krb5.h not found).
#CFLAGS += -I/usr/include/kerberos
# Example configuration for various cross-compilation platforms
#### sveasoft (e.g., for Linksys WRT54G) ######################################
#CC=mipsel-uclibc-gcc
#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
#CFLAGS += -Os
#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
###############################################################################
#### openwrt (e.g., for Linksys WRT54G) #######################################
#CC=mipsel-uclibc-gcc
#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
#CFLAGS += -Os
#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
# -I../WRT54GS/release/src/include
#LIBS = -lssl
###############################################################################
# Driver interface for Host AP driver
CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
#CFLAGS += -I../madwifi/wpa
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
#CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
#CFLAGS += -I/opt/WRT54GS/release/src/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5 (automatically included if EAP-TTLS is enabled)
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-PAX
#CONFIG_EAP_PAX=y
# LEAP
CONFIG_EAP_LEAP=y
# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
CONFIG_SMARTCARD=y
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
# Development testing
#CONFIG_EAPOL_TEST=y
# Replace native Linux implementation of packet sockets with libdnet/libpcap.
# This will be automatically set for non-Linux OS.
#CONFIG_DNET_PCAP=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y
# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y
# Remove debugging code that is printing out debug message to stdout.
# This can be used to reduce the size of the wpa_supplicant considerably
# if debugging code is not needed. The size reduction can be around 35%
# (e.g., 90 kB).
#CONFIG_NO_STDOUT_DEBUG=y
# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
# 35-50 kB in code size.
#CONFIG_NO_WPA=y
# Select configuration backend:
# file = text file (e.g., wpa_supplicant.conf)
CONFIG_BACKEND=file

View file

@ -0,0 +1,17 @@
Index: wpa_supplicant-0.6.3/src/tls/x509v3.c
===================================================================
--- wpa_supplicant-0.6.3.orig/src/tls/x509v3.c 2008-02-23 03:45:24.000000000 +0100
+++ wpa_supplicant-0.6.3/src/tls/x509v3.c 2008-07-09 12:47:19.000000000 +0200
@@ -1551,8 +1551,11 @@
if (chain_trusted)
continue;
- if ((unsigned long) now.sec <
+ if (
+#ifndef NO_TIMESTAMP_CHECK
+ (unsigned long) now.sec <
(unsigned long) cert->not_before ||
+#endif
(unsigned long) now.sec >
(unsigned long) cert->not_after) {
wpa_printf(MSG_INFO, "X509: Certificate not valid "

View file

@ -0,0 +1,51 @@
This patch decreases the timeouts for assoc/auth to more realistic values. Improves roaming speed
Index: wpa_supplicant-0.6.3/wpa_supplicant/events.c
===================================================================
--- wpa_supplicant-0.6.3.orig/wpa_supplicant/events.c 2008-02-23 03:45:24.000000000 +0100
+++ wpa_supplicant-0.6.3/wpa_supplicant/events.c 2008-07-09 15:13:37.000000000 +0200
@@ -762,7 +762,7 @@
wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
} else if (!ft_completed) {
/* Timeout for receiving the first EAPOL packet */
- wpa_supplicant_req_auth_timeout(wpa_s, 10, 0);
+ wpa_supplicant_req_auth_timeout(wpa_s, 3, 0);
}
wpa_supplicant_cancel_scan(wpa_s);
Index: wpa_supplicant-0.6.3/wpa_supplicant/scan.c
===================================================================
--- wpa_supplicant-0.6.3.orig/wpa_supplicant/scan.c 2008-02-23 03:45:24.000000000 +0100
+++ wpa_supplicant-0.6.3/wpa_supplicant/scan.c 2008-07-09 15:13:37.000000000 +0200
@@ -144,6 +144,7 @@
return;
}
+ wpa_drv_flush_pmkid(wpa_s);
if (wpa_s->use_client_mlme) {
ieee80211_sta_set_probe_req_ie(wpa_s, extra_ie, extra_ie_len);
ret = ieee80211_sta_req_scan(wpa_s, ssid ? ssid->ssid : NULL,
@@ -156,7 +157,7 @@
if (ret) {
wpa_printf(MSG_WARNING, "Failed to initiate AP scan.");
- wpa_supplicant_req_scan(wpa_s, 10, 0);
+ wpa_supplicant_req_scan(wpa_s, 3, 0);
}
}
Index: wpa_supplicant-0.6.3/wpa_supplicant/wpa_supplicant.c
===================================================================
--- wpa_supplicant-0.6.3.orig/wpa_supplicant/wpa_supplicant.c 2008-02-23 03:45:24.000000000 +0100
+++ wpa_supplicant-0.6.3/wpa_supplicant/wpa_supplicant.c 2008-07-09 15:13:37.000000000 +0200
@@ -1092,9 +1092,9 @@
/* Timeout for IEEE 802.11 authentication and association */
int timeout;
if (assoc_failed)
- timeout = 5;
+ timeout = 2;
else if (wpa_s->conf->ap_scan == 1)
- timeout = 10;
+ timeout = 3;
else
timeout = 60;
wpa_supplicant_req_auth_timeout(wpa_s, timeout, 0);

View file

@ -0,0 +1,41 @@
Don't do broadcast SSID scans, if all configured SSIDs use scan_ssid=1. Improves background scanning in supplicant-managed roaming.
Index: wpa_supplicant-0.6.3/wpa_supplicant/scan.c
===================================================================
--- wpa_supplicant-0.6.3.orig/wpa_supplicant/scan.c 2008-07-09 18:53:28.000000000 +0200
+++ wpa_supplicant-0.6.3/wpa_supplicant/scan.c 2008-07-09 19:00:55.000000000 +0200
@@ -48,11 +48,23 @@
int enabled, scan_req = 0, ret;
const u8 *extra_ie = NULL;
size_t extra_ie_len = 0;
+ int scan_ssid_all = 1;
if (wpa_s->disconnected && !wpa_s->scan_req)
return;
enabled = 0;
+
+ /* check if all configured ssids should be scanned directly */
+ ssid = wpa_s->conf->ssid;
+ while (ssid) {
+ if (!ssid->scan_ssid) {
+ scan_ssid_all = 0;
+ break;
+ }
+ ssid = ssid->next;
+ }
+
ssid = wpa_s->conf->ssid;
while (ssid) {
if (!ssid->disabled) {
@@ -125,6 +137,10 @@
return;
}
+ if (scan_ssid_all && !ssid) {
+ ssid = wpa_s->conf->ssid;
+ }
+
wpa_printf(MSG_DEBUG, "Starting AP scan (%s SSID)",
ssid ? "specific": "broadcast");
if (ssid) {

View file

@ -0,0 +1,167 @@
Add a scan result cache to improve roaming speed if the driver gave us a background scan before losing the connection.
Index: wpa_supplicant-0.6.3/wpa_supplicant/config.h
===================================================================
--- wpa_supplicant-0.6.3.orig/wpa_supplicant/config.h 2008-02-23 03:45:24.000000000 +0100
+++ wpa_supplicant-0.6.3/wpa_supplicant/config.h 2008-07-10 15:08:21.000000000 +0200
@@ -97,6 +97,12 @@
int ap_scan;
/**
+ * scan_cache - controls the time in seconds after the last scan results
+ * before a new scan may be initiated
+ */
+ int scan_cache;
+
+ /**
* ctrl_interface - Parameters for the control interface
*
* If this is specified, %wpa_supplicant will open a control interface
Index: wpa_supplicant-0.6.3/wpa_supplicant/config_file.c
===================================================================
--- wpa_supplicant-0.6.3.orig/wpa_supplicant/config_file.c 2008-02-23 03:45:24.000000000 +0100
+++ wpa_supplicant-0.6.3/wpa_supplicant/config_file.c 2008-07-10 15:59:38.000000000 +0200
@@ -312,6 +312,13 @@
return 0;
}
+static int wpa_config_process_scan_cache(struct wpa_config *config, char *pos)
+{
+ config->scan_cache = atoi(pos);
+ wpa_printf(MSG_DEBUG, "scan_cache=%d", config->scan_cache);
+ return 0;
+}
+
static int wpa_config_process_fast_reauth(struct wpa_config *config, char *pos)
{
@@ -445,6 +452,9 @@
if (os_strncmp(pos, "ap_scan=", 8) == 0)
return wpa_config_process_ap_scan(config, pos + 8);
+ if (os_strncmp(pos, "scan_cache=", 11) == 0)
+ return wpa_config_process_scan_cache(config, pos + 11);
+
if (os_strncmp(pos, "fast_reauth=", 12) == 0)
return wpa_config_process_fast_reauth(config, pos + 12);
@@ -810,6 +820,8 @@
fprintf(f, "eapol_version=%d\n", config->eapol_version);
if (config->ap_scan != DEFAULT_AP_SCAN)
fprintf(f, "ap_scan=%d\n", config->ap_scan);
+ if (config->scan_cache != 0)
+ fprintf(f, "scan_cache=%d\n", config->scan_cache);
if (config->fast_reauth != DEFAULT_FAST_REAUTH)
fprintf(f, "fast_reauth=%d\n", config->fast_reauth);
#ifdef EAP_TLS_OPENSSL
Index: wpa_supplicant-0.6.3/wpa_supplicant/events.c
===================================================================
--- wpa_supplicant-0.6.3.orig/wpa_supplicant/events.c 2008-07-10 13:27:03.000000000 +0200
+++ wpa_supplicant-0.6.3/wpa_supplicant/events.c 2008-07-10 17:18:53.000000000 +0200
@@ -555,6 +555,9 @@
if (wpa_s->conf->ap_scan == 2 || wpa_s->disconnected)
return;
+ if (wpa_s->wpa_state > WPA_ASSOCIATED)
+ goto done;
+
while (selected == NULL) {
for (prio = 0; prio < wpa_s->conf->num_prio; prio++) {
selected = wpa_supplicant_select_bss(
@@ -594,13 +597,16 @@
rsn_preauth_scan_results(wpa_s->wpa, wpa_s->scan_res);
} else {
wpa_printf(MSG_DEBUG, "No suitable AP found.");
- timeout = 5;
+ timeout = 1;
goto req_scan;
}
+done:
+ os_get_time(&wpa_s->last_scan_results);
return;
req_scan:
+ memset(&wpa_s->last_scan_results, 0, sizeof(wpa_s->last_scan_results));
if (wpa_s->scan_res_tried == 1 && wpa_s->conf->ap_scan == 1) {
/*
* Quick recovery if the initial scan results were not
@@ -804,6 +810,9 @@
}
if (wpa_s->wpa_state >= WPA_ASSOCIATED)
wpa_supplicant_req_scan(wpa_s, 0, 100000);
+ else if (wpa_s->wpa_state == WPA_ASSOCIATING)
+ wpa_supplicant_req_auth_timeout(wpa_s, 0, 100000);
+
bssid = wpa_s->bssid;
if (os_memcmp(bssid, "\x00\x00\x00\x00\x00\x00", ETH_ALEN) == 0)
bssid = wpa_s->pending_bssid;
Index: wpa_supplicant-0.6.3/wpa_supplicant/wpa_supplicant_i.h
===================================================================
--- wpa_supplicant-0.6.3.orig/wpa_supplicant/wpa_supplicant_i.h 2008-07-10 15:03:56.000000000 +0200
+++ wpa_supplicant-0.6.3/wpa_supplicant/wpa_supplicant_i.h 2008-07-10 15:16:17.000000000 +0200
@@ -334,6 +334,7 @@
struct wpa_client_mlme mlme;
int use_client_mlme;
int driver_4way_handshake;
+ struct os_time last_scan_results;
};
@@ -381,6 +382,7 @@
/* scan.c */
void wpa_supplicant_req_scan(struct wpa_supplicant *wpa_s, int sec, int usec);
+int wpa_supplicant_may_scan(struct wpa_supplicant *wpa_s);
void wpa_supplicant_cancel_scan(struct wpa_supplicant *wpa_s);
/* events.c */
Index: wpa_supplicant-0.6.3/wpa_supplicant/scan.c
===================================================================
--- wpa_supplicant-0.6.3.orig/wpa_supplicant/scan.c 2008-07-10 13:27:03.000000000 +0200
+++ wpa_supplicant-0.6.3/wpa_supplicant/scan.c 2008-07-10 16:24:31.000000000 +0200
@@ -40,6 +40,18 @@
wpa_supplicant_event(wpa_s, EVENT_ASSOC, &data);
}
+int wpa_supplicant_may_scan(struct wpa_supplicant *wpa_s)
+{
+ struct os_time time;
+
+ if (wpa_s->conf->scan_cache > 0) {
+ os_get_time(&time);
+ time.sec -= wpa_s->conf->scan_cache;
+ if (os_time_before(&time, &wpa_s->last_scan_results))
+ return 0;
+ }
+ return 1;
+}
static void wpa_supplicant_scan(void *eloop_ctx, void *timeout_ctx)
{
@@ -150,8 +162,9 @@
} else
wpa_s->prev_scan_ssid = BROADCAST_SSID_SCAN;
- if (wpa_s->scan_res_tried == 0 && wpa_s->conf->ap_scan == 1 &&
- !wpa_s->use_client_mlme) {
+ if (!wpa_supplicant_may_scan(wpa_s) ||
+ (wpa_s->scan_res_tried == 0 && wpa_s->conf->ap_scan == 1 &&
+ !wpa_s->use_client_mlme)) {
wpa_s->scan_res_tried++;
wpa_printf(MSG_DEBUG, "Trying to get current scan results "
"first without requesting a new scan to speed up "
Index: wpa_supplicant-0.6.3/wpa_supplicant/wpa_supplicant.c
===================================================================
--- wpa_supplicant-0.6.3.orig/wpa_supplicant/wpa_supplicant.c 2008-07-10 14:41:16.000000000 +0200
+++ wpa_supplicant-0.6.3/wpa_supplicant/wpa_supplicant.c 2008-07-10 18:45:59.000000000 +0200
@@ -1417,6 +1417,9 @@
{
struct wpa_supplicant *wpa_s = ctx;
+ if (wpa_s->wpa_state < WPA_ASSOCIATING)
+ return;
+
wpa_printf(MSG_DEBUG, "RX EAPOL from " MACSTR, MAC2STR(src_addr));
wpa_hexdump(MSG_MSGDUMP, "RX EAPOL", buf, len);