fixup avila networking, add support for the loft
SVN-Revision: 7168
This commit is contained in:
Imre Kaloz
parent
73c3a907a3
commit
1ada6a88e7
8 changed files with 773 additions and 3 deletions
|
|
@ -22,7 +22,7 @@
|
||||||
# NOTE: for now it's for only IXP4xx in big endian mode
|
# NOTE: for now it's for only IXP4xx in big endian mode
|
||||||
|
|
||||||
# list of supported boards, in "boardname machtypeid" format
|
# list of supported boards, in "boardname machtypeid" format
|
||||||
for board in "avila 526" "gateway7001 731" "nslu2 597" "nas100d 865" "wg302v2 890" "pronghornmetro 1040" "compex 1273" "wrt300nv2 1077"
|
for board in "avila 526" "gateway7001 731" "nslu2 597" "nas100d 865" "wg302v2 890" "pronghornmetro 1040" "compex 1273" "wrt300nv2 1077" "loft 849"
|
||||||
do
|
do
|
||||||
set -- $board
|
set -- $board
|
||||||
hexid=$(printf %x\\n $2)
|
hexid=$(printf %x\\n $2)
|
||||||
|
|
|
||||||
|
|
@ -5,7 +5,6 @@ CONFIG_ALIGNMENT_TRAP=y
|
||||||
# CONFIG_ARCH_AAEC2000 is not set
|
# CONFIG_ARCH_AAEC2000 is not set
|
||||||
# CONFIG_ARCH_ADI_COYOTE is not set
|
# CONFIG_ARCH_ADI_COYOTE is not set
|
||||||
# CONFIG_ARCH_AT91 is not set
|
# CONFIG_ARCH_AT91 is not set
|
||||||
CONFIG_ARCH_AVILA=y
|
|
||||||
# CONFIG_ARCH_CLPS711X is not set
|
# CONFIG_ARCH_CLPS711X is not set
|
||||||
# CONFIG_ARCH_CLPS7500 is not set
|
# CONFIG_ARCH_CLPS7500 is not set
|
||||||
# CONFIG_ARCH_CO285 is not set
|
# CONFIG_ARCH_CO285 is not set
|
||||||
|
|
@ -211,11 +210,13 @@ CONFIG_LEGACY_PTYS=y
|
||||||
CONFIG_LEGACY_PTY_COUNT=256
|
CONFIG_LEGACY_PTY_COUNT=256
|
||||||
# CONFIG_LIBCRC32C is not set
|
# CONFIG_LIBCRC32C is not set
|
||||||
# CONFIG_LLC2 is not set
|
# CONFIG_LLC2 is not set
|
||||||
|
CONFIG_MACH_AVILA=y
|
||||||
CONFIG_MACH_COMPEX=y
|
CONFIG_MACH_COMPEX=y
|
||||||
CONFIG_MACH_GATEWAY7001=y
|
CONFIG_MACH_GATEWAY7001=y
|
||||||
# CONFIG_MACH_GTWX5715 is not set
|
# CONFIG_MACH_GTWX5715 is not set
|
||||||
# CONFIG_MACH_IXDP465 is not set
|
# CONFIG_MACH_IXDP465 is not set
|
||||||
# CONFIG_MACH_IXDPG425 is not set
|
# CONFIG_MACH_IXDPG425 is not set
|
||||||
|
CONFIG_MACH_LOFT=y
|
||||||
CONFIG_MACH_NAS100D=y
|
CONFIG_MACH_NAS100D=y
|
||||||
CONFIG_MACH_NSLU2=y
|
CONFIG_MACH_NSLU2=y
|
||||||
CONFIG_MACH_PRONGHORNMETRO=y
|
CONFIG_MACH_PRONGHORNMETRO=y
|
||||||
|
|
@ -395,7 +396,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||||
# CONFIG_SENSORS_DS1337 is not set
|
# CONFIG_SENSORS_DS1337 is not set
|
||||||
# CONFIG_SENSORS_DS1374 is not set
|
# CONFIG_SENSORS_DS1374 is not set
|
||||||
# CONFIG_SENSORS_DS1621 is not set
|
# CONFIG_SENSORS_DS1621 is not set
|
||||||
# CONFIG_SENSORS_EEPROM is not set
|
CONFIG_SENSORS_EEPROM=y
|
||||||
# CONFIG_SENSORS_F71805F is not set
|
# CONFIG_SENSORS_F71805F is not set
|
||||||
# CONFIG_SENSORS_FSCHER is not set
|
# CONFIG_SENSORS_FSCHER is not set
|
||||||
# CONFIG_SENSORS_FSCPOS is not set
|
# CONFIG_SENSORS_FSCPOS is not set
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,39 @@
|
||||||
|
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c
|
||||||
|
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-04-15 14:26:04.000000000 +0200
|
||||||
|
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-05-10 11:10:40.000000000 +0200
|
||||||
|
@@ -66,7 +66,7 @@
|
||||||
|
int __init ixdp425_pci_init(void)
|
||||||
|
{
|
||||||
|
if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
|
||||||
|
- machine_is_avila() || machine_is_ixdp465() || machine_is_compex())
|
||||||
|
+ machine_is_ixdp465() || machine_is_compex())
|
||||||
|
pci_common_init(&ixdp425_pci);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/ixdp425-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/ixdp425-setup.c
|
||||||
|
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/ixdp425-setup.c 2007-04-15 14:26:49.000000000 +0200
|
||||||
|
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/ixdp425-setup.c 2007-05-10 11:10:01.000000000 +0200
|
||||||
|
@@ -205,23 +205,3 @@
|
||||||
|
.init_machine = ixdp425_init,
|
||||||
|
MACHINE_END
|
||||||
|
#endif
|
||||||
|
-
|
||||||
|
-/*
|
||||||
|
- * Avila is functionally equivalent to IXDP425 except that it adds
|
||||||
|
- * a CF IDE slot hanging off the expansion bus. When we have a
|
||||||
|
- * driver for IXP4xx CF IDE with driver model support we'll move
|
||||||
|
- * Avila to it's own setup file.
|
||||||
|
- */
|
||||||
|
-#ifdef CONFIG_ARCH_AVILA
|
||||||
|
-MACHINE_START(AVILA, "Gateworks Avila Network Platform")
|
||||||
|
- /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
|
||||||
|
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
||||||
|
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
||||||
|
- .map_io = ixp4xx_map_io,
|
||||||
|
- .init_irq = ixp4xx_init_irq,
|
||||||
|
- .timer = &ixp4xx_timer,
|
||||||
|
- .boot_params = 0x0100,
|
||||||
|
- .init_machine = ixdp425_init,
|
||||||
|
-MACHINE_END
|
||||||
|
-#endif
|
||||||
|
-
|
||||||
381
target/linux/ixp4xx-2.6/patches/710-avila_loft_setup.patch
Normal file
381
target/linux/ixp4xx-2.6/patches/710-avila_loft_setup.patch
Normal file
|
|
@ -0,0 +1,381 @@
|
||||||
|
This patch adds support for the Gateworks Avila Network Platform in
|
||||||
|
a separate set of setup files to the IXDP425. This is necessary now
|
||||||
|
that a driver for the Avila CF card slot is available. It also adds
|
||||||
|
support for a minor variant on the Avila board known as the Loft,
|
||||||
|
which has a different number of maximum PCI devices.
|
||||||
|
|
||||||
|
Signed-off-by: Michael-Luke Jones <mlj28 <at> cam.ac.uk>
|
||||||
|
|
||||||
|
Index: linux-2.6.19/arch/arm/mach-ixp4xx/Kconfig
|
||||||
|
===================================================================
|
||||||
|
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/Kconfig
|
||||||
|
+++ linux-2.6.19/arch/arm/mach-ixp4xx/Kconfig
|
||||||
|
@@ -17,7 +17,7 @@ config MACH_NSLU2
|
||||||
|
NSLU2 NAS device. For more information on this platform,
|
||||||
|
see http://www.nslu2-linux.org
|
||||||
|
|
||||||
|
-config ARCH_AVILA
|
||||||
|
+config MACH_AVILA
|
||||||
|
bool "Avila"
|
||||||
|
select PCI
|
||||||
|
help
|
||||||
|
@@ -25,6 +25,14 @@ config ARCH_AVILA
|
||||||
|
Avila Network Platform. For more information on this platform,
|
||||||
|
see <file:Documentation/arm/IXP4xx>.
|
||||||
|
|
||||||
|
+config MACH_LOFT
|
||||||
|
+ bool "Loft"
|
||||||
|
+ depends on MACH_AVILA
|
||||||
|
+ help
|
||||||
|
+ Say 'Y' here if you want your kernel to support the Giant
|
||||||
|
+ Shoulder Inc Loft board (a minor variation on the standard
|
||||||
|
+ Gateworks Avila Network Platform).
|
||||||
|
+
|
||||||
|
config ARCH_ADI_COYOTE
|
||||||
|
bool "Coyote"
|
||||||
|
select PCI
|
||||||
|
@@ -86,7 +94,7 @@ config MACH_NAS100D
|
||||||
|
#
|
||||||
|
config ARCH_IXDP4XX
|
||||||
|
bool
|
||||||
|
- depends on ARCH_IXDP425 || ARCH_AVILA || MACH_IXDP465
|
||||||
|
+ depends on ARCH_IXDP425 || MACH_IXDP465
|
||||||
|
default y
|
||||||
|
|
||||||
|
#
|
||||||
|
Index: linux-2.6.19/arch/arm/mach-ixp4xx/Makefile
|
||||||
|
===================================================================
|
||||||
|
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/Makefile
|
||||||
|
+++ linux-2.6.19/arch/arm/mach-ixp4xx/Makefile
|
||||||
|
@@ -6,6 +6,7 @@ obj-pci-y :=
|
||||||
|
obj-pci-n :=
|
||||||
|
|
||||||
|
obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
|
||||||
|
+obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
|
||||||
|
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
|
||||||
|
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
|
||||||
|
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
|
||||||
|
@@ -15,6 +16,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas10
|
||||||
|
obj-y += common.o
|
||||||
|
|
||||||
|
obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
|
||||||
|
+obj-$(CONFIG_MACH_AVILA) += avila-setup.o
|
||||||
|
obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
|
||||||
|
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
|
||||||
|
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
|
||||||
|
Index: linux-2.6.19/arch/arm/mach-ixp4xx/avila-pci.c
|
||||||
|
===================================================================
|
||||||
|
--- /dev/null
|
||||||
|
+++ linux-2.6.19/arch/arm/mach-ixp4xx/avila-pci.c
|
||||||
|
@@ -0,0 +1,78 @@
|
||||||
|
+/*
|
||||||
|
+ * arch/arm/mach-ixp4xx/avila-pci.c
|
||||||
|
+ *
|
||||||
|
+ * Gateworks Avila board-level PCI initialization
|
||||||
|
+ *
|
||||||
|
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
|
||||||
|
+ *
|
||||||
|
+ * Based on ixdp-pci.c
|
||||||
|
+ * Copyright (C) 2002 Intel Corporation.
|
||||||
|
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
|
||||||
|
+ *
|
||||||
|
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
|
||||||
|
+ *
|
||||||
|
+ * This program is free software; you can redistribute it and/or modify
|
||||||
|
+ * it under the terms of the GNU General Public License version 2 as
|
||||||
|
+ * published by the Free Software Foundation.
|
||||||
|
+ *
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#include <linux/kernel.h>
|
||||||
|
+#include <linux/pci.h>
|
||||||
|
+#include <linux/init.h>
|
||||||
|
+#include <linux/irq.h>
|
||||||
|
+#include <linux/delay.h>
|
||||||
|
+
|
||||||
|
+#include <asm/mach/pci.h>
|
||||||
|
+#include <asm/irq.h>
|
||||||
|
+#include <asm/hardware.h>
|
||||||
|
+#include <asm/mach-types.h>
|
||||||
|
+
|
||||||
|
+void __init avila_pci_preinit(void)
|
||||||
|
+{
|
||||||
|
+ set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
|
||||||
|
+ set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
|
||||||
|
+ set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
|
||||||
|
+ set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
|
||||||
|
+
|
||||||
|
+ ixp4xx_pci_preinit();
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||||
|
+{
|
||||||
|
+ static int pci_irq_table[AVILA_PCI_IRQ_LINES] = {
|
||||||
|
+ IRQ_AVILA_PCI_INTA,
|
||||||
|
+ IRQ_AVILA_PCI_INTB,
|
||||||
|
+ IRQ_AVILA_PCI_INTC,
|
||||||
|
+ IRQ_AVILA_PCI_INTD
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ int irq = -1;
|
||||||
|
+
|
||||||
|
+ if (slot >= 1 &&
|
||||||
|
+ slot <= (machine_is_loft() ? LOFT_PCI_MAX_DEV : AVILA_PCI_MAX_DEV) &&
|
||||||
|
+ pin >= 1 && pin <= AVILA_PCI_IRQ_LINES) {
|
||||||
|
+ irq = pci_irq_table[(slot + pin - 2) % 4];
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ return irq;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+struct hw_pci avila_pci __initdata = {
|
||||||
|
+ .nr_controllers = 1,
|
||||||
|
+ .preinit = avila_pci_preinit,
|
||||||
|
+ .swizzle = pci_std_swizzle,
|
||||||
|
+ .setup = ixp4xx_setup,
|
||||||
|
+ .scan = ixp4xx_scan_bus,
|
||||||
|
+ .map_irq = avila_map_irq,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+int __init avila_pci_init(void)
|
||||||
|
+{
|
||||||
|
+ if (machine_is_avila() || machine_is_loft())
|
||||||
|
+ pci_common_init(&avila_pci);
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+subsys_initcall(avila_pci_init);
|
||||||
|
+
|
||||||
|
Index: linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c
|
||||||
|
===================================================================
|
||||||
|
--- /dev/null
|
||||||
|
+++ linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c
|
||||||
|
@@ -0,0 +1,152 @@
|
||||||
|
+/*
|
||||||
|
+ * arch/arm/mach-ixp4xx/avila-setup.c
|
||||||
|
+ *
|
||||||
|
+ * Gateworks Avila board-setup
|
||||||
|
+ *
|
||||||
|
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
|
||||||
|
+ *
|
||||||
|
+ * Based on ixdp-setup.c
|
||||||
|
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
|
||||||
|
+ *
|
||||||
|
+ * Author: Deepak Saxena <dsaxena@plexity.net>
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#include <linux/kernel.h>
|
||||||
|
+#include <linux/init.h>
|
||||||
|
+#include <linux/device.h>
|
||||||
|
+#include <linux/serial.h>
|
||||||
|
+#include <linux/tty.h>
|
||||||
|
+#include <linux/serial_8250.h>
|
||||||
|
+#include <linux/slab.h>
|
||||||
|
+
|
||||||
|
+#include <asm/types.h>
|
||||||
|
+#include <asm/setup.h>
|
||||||
|
+#include <asm/memory.h>
|
||||||
|
+#include <asm/hardware.h>
|
||||||
|
+#include <asm/mach-types.h>
|
||||||
|
+#include <asm/irq.h>
|
||||||
|
+#include <asm/mach/arch.h>
|
||||||
|
+#include <asm/mach/flash.h>
|
||||||
|
+
|
||||||
|
+static struct flash_platform_data avila_flash_data = {
|
||||||
|
+ .map_name = "cfi_probe",
|
||||||
|
+ .width = 2,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct resource avila_flash_resource = {
|
||||||
|
+ .flags = IORESOURCE_MEM,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct platform_device avila_flash = {
|
||||||
|
+ .name = "IXP4XX-Flash",
|
||||||
|
+ .id = 0,
|
||||||
|
+ .dev = {
|
||||||
|
+ .platform_data = &avila_flash_data,
|
||||||
|
+ },
|
||||||
|
+ .num_resources = 1,
|
||||||
|
+ .resource = &avila_flash_resource,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
|
||||||
|
+ .sda_pin = AVILA_SDA_PIN,
|
||||||
|
+ .scl_pin = AVILA_SCL_PIN,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct platform_device avila_i2c_controller = {
|
||||||
|
+ .name = "IXP4XX-I2C",
|
||||||
|
+ .id = 0,
|
||||||
|
+ .dev = {
|
||||||
|
+ .platform_data = &avila_i2c_gpio_pins,
|
||||||
|
+ },
|
||||||
|
+ .num_resources = 0
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct resource avila_uart_resources[] = {
|
||||||
|
+ {
|
||||||
|
+ .start = IXP4XX_UART1_BASE_PHYS,
|
||||||
|
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
||||||
|
+ .flags = IORESOURCE_MEM
|
||||||
|
+ },
|
||||||
|
+ {
|
||||||
|
+ .start = IXP4XX_UART2_BASE_PHYS,
|
||||||
|
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
||||||
|
+ .flags = IORESOURCE_MEM
|
||||||
|
+ }
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct plat_serial8250_port avila_uart_data[] = {
|
||||||
|
+ {
|
||||||
|
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
|
||||||
|
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
|
||||||
|
+ .irq = IRQ_IXP4XX_UART1,
|
||||||
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||||
|
+ .iotype = UPIO_MEM,
|
||||||
|
+ .regshift = 2,
|
||||||
|
+ .uartclk = IXP4XX_UART_XTAL,
|
||||||
|
+ },
|
||||||
|
+ {
|
||||||
|
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
|
||||||
|
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
||||||
|
+ .irq = IRQ_IXP4XX_UART2,
|
||||||
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||||
|
+ .iotype = UPIO_MEM,
|
||||||
|
+ .regshift = 2,
|
||||||
|
+ .uartclk = IXP4XX_UART_XTAL,
|
||||||
|
+ },
|
||||||
|
+ { },
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct platform_device avila_uart = {
|
||||||
|
+ .name = "serial8250",
|
||||||
|
+ .id = PLAT8250_DEV_PLATFORM,
|
||||||
|
+ .dev.platform_data = avila_uart_data,
|
||||||
|
+ .num_resources = 2,
|
||||||
|
+ .resource = avila_uart_resources
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct platform_device *avila_devices[] __initdata = {
|
||||||
|
+ &avila_i2c_controller,
|
||||||
|
+ &avila_flash,
|
||||||
|
+ &avila_uart
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static void __init avila_init(void)
|
||||||
|
+{
|
||||||
|
+ ixp4xx_sys_init();
|
||||||
|
+
|
||||||
|
+ avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
||||||
|
+ avila_flash_resource.end =
|
||||||
|
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
|
||||||
|
+
|
||||||
|
+ platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+MACHINE_START(AVILA, "Gateworks Avila Network Platform")
|
||||||
|
+ /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
|
||||||
|
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
||||||
|
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
||||||
|
+ .map_io = ixp4xx_map_io,
|
||||||
|
+ .init_irq = ixp4xx_init_irq,
|
||||||
|
+ .timer = &ixp4xx_timer,
|
||||||
|
+ .boot_params = 0x0100,
|
||||||
|
+ .init_machine = avila_init,
|
||||||
|
+MACHINE_END
|
||||||
|
+
|
||||||
|
+ /*
|
||||||
|
+ * Loft is functionally equivalent to Avila except that it has a
|
||||||
|
+ * different number for the maximum PCI devices. The MACHINE
|
||||||
|
+ * structure below is identical to Avila except for the comment.
|
||||||
|
+ */
|
||||||
|
+#ifdef CONFIG_MACH_LOFT
|
||||||
|
+MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
|
||||||
|
+ /* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
|
||||||
|
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
||||||
|
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
||||||
|
+ .map_io = ixp4xx_map_io,
|
||||||
|
+ .init_irq = ixp4xx_init_irq,
|
||||||
|
+ .timer = &ixp4xx_timer,
|
||||||
|
+ .boot_params = 0x0100,
|
||||||
|
+ .init_machine = avila_init,
|
||||||
|
+MACHINE_END
|
||||||
|
+#endif
|
||||||
|
+
|
||||||
|
Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/avila.h
|
||||||
|
===================================================================
|
||||||
|
--- /dev/null
|
||||||
|
+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/avila.h
|
||||||
|
@@ -0,0 +1,39 @@
|
||||||
|
+/*
|
||||||
|
+ * include/asm-arm/arch-ixp4xx/avila.h
|
||||||
|
+ *
|
||||||
|
+ * Gateworks Avila platform specific definitions
|
||||||
|
+ *
|
||||||
|
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
|
||||||
|
+ *
|
||||||
|
+ * Based on ixdp425.h
|
||||||
|
+ * Author: Deepak Saxena <dsaxena@plexity.net>
|
||||||
|
+ *
|
||||||
|
+ * Copyright 2004 (c) MontaVista, Software, Inc.
|
||||||
|
+ *
|
||||||
|
+ * This file is licensed under the terms of the GNU General Public
|
||||||
|
+ * License version 2. This program is licensed "as is" without any
|
||||||
|
+ * warranty of any kind, whether express or implied.
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#ifndef __ASM_ARCH_HARDWARE_H__
|
||||||
|
+#error "Do not include this directly, instead #include <asm/hardware.h>"
|
||||||
|
+#endif
|
||||||
|
+
|
||||||
|
+#define AVILA_SDA_PIN 7
|
||||||
|
+#define AVILA_SCL_PIN 6
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * AVILA PCI IRQs
|
||||||
|
+ */
|
||||||
|
+#define AVILA_PCI_MAX_DEV 4
|
||||||
|
+#define LOFT_PCI_MAX_DEV 6
|
||||||
|
+#define AVILA_PCI_IRQ_LINES 4
|
||||||
|
+
|
||||||
|
+
|
||||||
|
+/* PCI controller GPIO to IRQ pin mappings */
|
||||||
|
+#define AVILA_PCI_INTA_PIN 11
|
||||||
|
+#define AVILA_PCI_INTB_PIN 10
|
||||||
|
+#define AVILA_PCI_INTC_PIN 9
|
||||||
|
+#define AVILA_PCI_INTD_PIN 8
|
||||||
|
+
|
||||||
|
+
|
||||||
|
Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/hardware.h
|
||||||
|
===================================================================
|
||||||
|
--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/hardware.h
|
||||||
|
+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/hardware.h
|
||||||
|
@@ -42,6 +42,7 @@ extern unsigned int processor_id;
|
||||||
|
|
||||||
|
/* Platform specific details */
|
||||||
|
#include "ixdp425.h"
|
||||||
|
+#include "avila.h"
|
||||||
|
#include "coyote.h"
|
||||||
|
#include "prpmc1100.h"
|
||||||
|
#include "nslu2.h"
|
||||||
|
Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/irqs.h
|
||||||
|
===================================================================
|
||||||
|
--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/irqs.h
|
||||||
|
+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/irqs.h
|
||||||
|
@@ -79,6 +79,15 @@
|
||||||
|
#define IRQ_IXDP425_PCI_INTD IRQ_IXP4XX_GPIO8
|
||||||
|
|
||||||
|
/*
|
||||||
|
+ * Gateworks Avila board IRQs
|
||||||
|
+ */
|
||||||
|
+#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11
|
||||||
|
+#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10
|
||||||
|
+#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9
|
||||||
|
+#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8
|
||||||
|
+
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
* PrPMC1100 Board IRQs
|
||||||
|
*/
|
||||||
|
#define IRQ_PRPMC1100_PCI_INTA IRQ_IXP4XX_GPIO11
|
||||||
70
target/linux/ixp4xx-2.6/patches/720-avila_setup_mac.patch
Normal file
70
target/linux/ixp4xx-2.6/patches/720-avila_setup_mac.patch
Normal file
|
|
@ -0,0 +1,70 @@
|
||||||
|
---
|
||||||
|
arch/arm/mach-ixp4xx/avila-setup.c | 50 ++++++++++++++++++++++++++++++++++++-
|
||||||
|
1 file changed, 49 insertions(+), 1 deletion(-)
|
||||||
|
|
||||||
|
Index: linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c
|
||||||
|
===================================================================
|
||||||
|
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/avila-setup.c
|
||||||
|
+++ linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c
|
||||||
|
@@ -104,10 +104,60 @@ static struct platform_device avila_uart
|
||||||
|
.resource = avila_uart_resources
|
||||||
|
};
|
||||||
|
|
||||||
|
+/* MACs */
|
||||||
|
+static struct resource res_mac0 = {
|
||||||
|
+ .start = IXP4XX_EthB_BASE_PHYS,
|
||||||
|
+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
|
||||||
|
+ .flags = IORESOURCE_MEM,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct resource res_mac1 = {
|
||||||
|
+ .start = IXP4XX_EthC_BASE_PHYS,
|
||||||
|
+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
|
||||||
|
+ .flags = IORESOURCE_MEM,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct mac_plat_info plat_mac0 = {
|
||||||
|
+ .npe_id = 1,
|
||||||
|
+ .phy_id = 0,
|
||||||
|
+ .eth_id = 0,
|
||||||
|
+ .rxq_id = 27,
|
||||||
|
+ .txq_id = 24,
|
||||||
|
+ .rxdoneq_id = 4,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct mac_plat_info plat_mac1 = {
|
||||||
|
+ .npe_id = 2,
|
||||||
|
+ .phy_id = 1,
|
||||||
|
+ .eth_id = 1,
|
||||||
|
+ .rxq_id = 28,
|
||||||
|
+ .txq_id = 25,
|
||||||
|
+ .rxdoneq_id = 5,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct platform_device mac0 = {
|
||||||
|
+ .name = "ixp4xx_mac",
|
||||||
|
+ .id = 0,
|
||||||
|
+ .dev.platform_data = &plat_mac0,
|
||||||
|
+ .num_resources = 1,
|
||||||
|
+ .resource = &res_mac0,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct platform_device mac1 = {
|
||||||
|
+ .name = "ixp4xx_mac",
|
||||||
|
+ .id = 1,
|
||||||
|
+ .dev.platform_data = &plat_mac1,
|
||||||
|
+ .num_resources = 1,
|
||||||
|
+ .resource = &res_mac1,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
static struct platform_device *avila_devices[] __initdata = {
|
||||||
|
&avila_i2c_controller,
|
||||||
|
&avila_flash,
|
||||||
|
- &avila_uart
|
||||||
|
+ &avila_uart,
|
||||||
|
+ &mac0,
|
||||||
|
+ &mac1,
|
||||||
|
+
|
||||||
|
};
|
||||||
|
|
||||||
|
static void __init avila_init(void)
|
||||||
|
|
@ -0,0 +1,50 @@
|
||||||
|
Index: linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c
|
||||||
|
===================================================================
|
||||||
|
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/avila-setup.c 2007-01-23 03:12:36.000000000 -0800
|
||||||
|
+++ linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c 2007-01-23 03:12:47.000000000 -0800
|
||||||
|
@@ -18,6 +18,10 @@
|
||||||
|
#include <linux/tty.h>
|
||||||
|
#include <linux/serial_8250.h>
|
||||||
|
#include <linux/slab.h>
|
||||||
|
+#ifdef CONFIG_SENSORS_EEPROM
|
||||||
|
+#include <linux/i2c.h>
|
||||||
|
+#include <linux/eeprom.h>
|
||||||
|
+#endif
|
||||||
|
|
||||||
|
#include <asm/types.h>
|
||||||
|
#include <asm/setup.h>
|
||||||
|
@@ -198,9 +202,34 @@
|
||||||
|
&avila_npe_ucode,
|
||||||
|
};
|
||||||
|
|
||||||
|
+#ifdef CONFIG_SENSORS_EEPROM
|
||||||
|
+static int loft_eeprom_do(struct notifier_block *self, unsigned long event, void *t)
|
||||||
|
+{
|
||||||
|
+ struct eeprom_data *data = t;
|
||||||
|
+
|
||||||
|
+ char macs[12];
|
||||||
|
+
|
||||||
|
+ /* The MACs are the first 12 bytes in the eeprom at address 0x51 */
|
||||||
|
+ if (event == EEPROM_REGISTER && data->client.addr == 0x51) {
|
||||||
|
+ data->attr->read(&data->client.dev.kobj, macs, 0, 12);
|
||||||
|
+ memcpy(&plat_mac0.hwaddr, macs, 6);
|
||||||
|
+ memcpy(&plat_mac1.hwaddr, macs + 6, 6);
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ return NOTIFY_DONE;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static struct notifier_block loft_eeprom_notifier = {
|
||||||
|
+ .notifier_call = loft_eeprom_do
|
||||||
|
+};
|
||||||
|
+#endif
|
||||||
|
+
|
||||||
|
static void __init avila_init(void)
|
||||||
|
{
|
||||||
|
ixp4xx_sys_init();
|
||||||
|
+#ifdef CONFIG_SENSORS_EEPROM
|
||||||
|
+ register_eeprom_notifier(&loft_eeprom_notifier);
|
||||||
|
+#endif
|
||||||
|
|
||||||
|
avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
||||||
|
avila_flash_resource.end =
|
||||||
|
|
@ -0,0 +1,28 @@
|
||||||
|
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/avila-setup.c
|
||||||
|
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/avila-setup.c 2007-05-10 12:30:54.000000000 +0200
|
||||||
|
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/avila-setup.c 2007-05-10 12:33:08.000000000 +0200
|
||||||
|
@@ -155,13 +155,23 @@
|
||||||
|
.resource = &res_mac1,
|
||||||
|
};
|
||||||
|
|
||||||
|
+struct npe_ucode_platform_data avila_npe_ucode_data = {
|
||||||
|
+ .mtd_partition = "RedBoot",
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct platform_device avila_npe_ucode = {
|
||||||
|
+ .name = "ixp4xx_npe_ucode",
|
||||||
|
+ .id = 0,
|
||||||
|
+ .dev.platform_data = &avila_npe_ucode_data,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
static struct platform_device *avila_devices[] __initdata = {
|
||||||
|
&avila_i2c_controller,
|
||||||
|
&avila_flash,
|
||||||
|
&avila_uart,
|
||||||
|
&mac0,
|
||||||
|
&mac1,
|
||||||
|
-
|
||||||
|
+ &avila_npe_ucode,
|
||||||
|
};
|
||||||
|
|
||||||
|
#ifdef CONFIG_SENSORS_EEPROM
|
||||||
201
target/linux/ixp4xx-2.6/patches/800-eeprom_new_notifier.patch
Normal file
201
target/linux/ixp4xx-2.6/patches/800-eeprom_new_notifier.patch
Normal file
|
|
@ -0,0 +1,201 @@
|
||||||
|
Add EEPROM notifiers
|
||||||
|
|
||||||
|
These help board level code by allowing a callback when EEPROMs are
|
||||||
|
loaded, this permits system level configuration to be loaded from the
|
||||||
|
EEPROM. This is particularly useful when the ethernet MAC ids are
|
||||||
|
stored in EEPROM and when the ethernet hardware is generic (so it
|
||||||
|
has no board level knowledge), then the MACs can be loaded into
|
||||||
|
the 'maclist' code and read out by the ethernet config.
|
||||||
|
|
||||||
|
Signed-off-by: John Bowler <jbowler@acm.org>
|
||||||
|
|
||||||
|
Index: linux-2.6.19/drivers/i2c/chips/eeprom.c
|
||||||
|
===================================================================
|
||||||
|
--- linux-2.6.19.orig/drivers/i2c/chips/eeprom.c
|
||||||
|
+++ linux-2.6.19/drivers/i2c/chips/eeprom.c
|
||||||
|
@@ -34,6 +34,8 @@
|
||||||
|
#include <linux/jiffies.h>
|
||||||
|
#include <linux/i2c.h>
|
||||||
|
#include <linux/mutex.h>
|
||||||
|
+#include <linux/notifier.h>
|
||||||
|
+#include <linux/eeprom.h>
|
||||||
|
|
||||||
|
/* Addresses to scan */
|
||||||
|
static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
|
||||||
|
@@ -42,26 +44,7 @@ static unsigned short normal_i2c[] = { 0
|
||||||
|
/* Insmod parameters */
|
||||||
|
I2C_CLIENT_INSMOD_1(eeprom);
|
||||||
|
|
||||||
|
-
|
||||||
|
-/* Size of EEPROM in bytes */
|
||||||
|
-#define EEPROM_SIZE 256
|
||||||
|
-
|
||||||
|
-/* possible types of eeprom devices */
|
||||||
|
-enum eeprom_nature {
|
||||||
|
- UNKNOWN,
|
||||||
|
- VAIO,
|
||||||
|
-};
|
||||||
|
-
|
||||||
|
-/* Each client has this additional data */
|
||||||
|
-struct eeprom_data {
|
||||||
|
- struct i2c_client client;
|
||||||
|
- struct mutex update_lock;
|
||||||
|
- u8 valid; /* bitfield, bit!=0 if slice is valid */
|
||||||
|
- unsigned long last_updated[8]; /* In jiffies, 8 slices */
|
||||||
|
- u8 data[EEPROM_SIZE]; /* Register values */
|
||||||
|
- enum eeprom_nature nature;
|
||||||
|
-};
|
||||||
|
-
|
||||||
|
+ATOMIC_NOTIFIER_HEAD(eeprom_chain);
|
||||||
|
|
||||||
|
static int eeprom_attach_adapter(struct i2c_adapter *adapter);
|
||||||
|
static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
|
||||||
|
@@ -190,6 +173,7 @@ static int eeprom_detect(struct i2c_adap
|
||||||
|
data->valid = 0;
|
||||||
|
mutex_init(&data->update_lock);
|
||||||
|
data->nature = UNKNOWN;
|
||||||
|
+ data->attr = &eeprom_attr;
|
||||||
|
|
||||||
|
/* Tell the I2C layer a new client has arrived */
|
||||||
|
if ((err = i2c_attach_client(new_client)))
|
||||||
|
@@ -213,6 +197,9 @@ static int eeprom_detect(struct i2c_adap
|
||||||
|
if (err)
|
||||||
|
goto exit_detach;
|
||||||
|
|
||||||
|
+ /* call the notifier chain */
|
||||||
|
+ atomic_notifier_call_chain(&eeprom_chain, EEPROM_REGISTER, data);
|
||||||
|
+
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
exit_detach:
|
||||||
|
@@ -238,6 +225,41 @@ static int eeprom_detach_client(struct i
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
+/**
|
||||||
|
+ * register_eeprom_notifier - register a 'user' of EEPROM devices.
|
||||||
|
+ * @nb: pointer to notifier info structure
|
||||||
|
+ *
|
||||||
|
+ * Registers a callback function to be called upon detection
|
||||||
|
+ * of an EEPROM device. Detection invokes the 'add' callback
|
||||||
|
+ * with the kobj of the mutex and a bin_attribute which allows
|
||||||
|
+ * read from the EEPROM. The intention is that the notifier
|
||||||
|
+ * will be able to read system configuration from the notifier.
|
||||||
|
+ *
|
||||||
|
+ * Only EEPROMs detected *after* the addition of the notifier
|
||||||
|
+ * are notified. I.e. EEPROMs already known to the system
|
||||||
|
+ * will not be notified - add the notifier from board level
|
||||||
|
+ * code!
|
||||||
|
+ */
|
||||||
|
+int register_eeprom_notifier(struct notifier_block *nb)
|
||||||
|
+{
|
||||||
|
+ return atomic_notifier_chain_register(&eeprom_chain, nb);
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+/**
|
||||||
|
+ * unregister_eeprom_notifier - unregister a 'user' of EEPROM devices.
|
||||||
|
+ * @old: pointer to notifier info structure
|
||||||
|
+ *
|
||||||
|
+ * Removes a callback function from the list of 'users' to be
|
||||||
|
+ * notified upon detection of EEPROM devices.
|
||||||
|
+ */
|
||||||
|
+int unregister_eeprom_notifier(struct notifier_block *nb)
|
||||||
|
+{
|
||||||
|
+ return atomic_notifier_chain_unregister(&eeprom_chain, nb);
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+EXPORT_SYMBOL_GPL(register_eeprom_notifier);
|
||||||
|
+EXPORT_SYMBOL_GPL(unregister_eeprom_notifier);
|
||||||
|
+
|
||||||
|
static int __init eeprom_init(void)
|
||||||
|
{
|
||||||
|
return i2c_add_driver(&eeprom_driver);
|
||||||
|
Index: linux-2.6.19/include/linux/eeprom.h
|
||||||
|
===================================================================
|
||||||
|
--- /dev/null
|
||||||
|
+++ linux-2.6.19/include/linux/eeprom.h
|
||||||
|
@@ -0,0 +1,71 @@
|
||||||
|
+#ifndef _LINUX_EEPROM_H
|
||||||
|
+#define _LINUX_EEPROM_H
|
||||||
|
+/*
|
||||||
|
+ * $Id: 45-eeprom-new-notifier.patch,v 1.2 2006/03/27 11:10:19 azummo Exp $
|
||||||
|
+ *
|
||||||
|
+ * Copyright (C) 2006 John Bowler
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * This program is free software; you can redistribute it and/or modify
|
||||||
|
+ * it under the terms of the GNU General Public License as published by
|
||||||
|
+ * the Free Software Foundation; either version 2 of the License, or
|
||||||
|
+ * (at your option) any later version.
|
||||||
|
+ *
|
||||||
|
+ * This program is distributed in the hope that it will be useful,
|
||||||
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
+ * GNU General Public License for more details.
|
||||||
|
+ *
|
||||||
|
+ * You should have received a copy of the GNU General Public License
|
||||||
|
+ * along with this program; if not, write to the Free Software
|
||||||
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#ifndef __KERNEL__
|
||||||
|
+#error This is a kernel header
|
||||||
|
+#endif
|
||||||
|
+
|
||||||
|
+#include <linux/list.h>
|
||||||
|
+#include <linux/kobject.h>
|
||||||
|
+#include <linux/sysfs.h>
|
||||||
|
+
|
||||||
|
+/* Size of EEPROM in bytes */
|
||||||
|
+#define EEPROM_SIZE 256
|
||||||
|
+
|
||||||
|
+/* possible types of eeprom devices */
|
||||||
|
+enum eeprom_nature {
|
||||||
|
+ UNKNOWN,
|
||||||
|
+ VAIO,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+/* Each client has this additional data */
|
||||||
|
+struct eeprom_data {
|
||||||
|
+ struct i2c_client client;
|
||||||
|
+ struct mutex update_lock;
|
||||||
|
+ u8 valid; /* bitfield, bit!=0 if slice is valid */
|
||||||
|
+ unsigned long last_updated[8]; /* In jiffies, 8 slices */
|
||||||
|
+ u8 data[EEPROM_SIZE]; /* Register values */
|
||||||
|
+ enum eeprom_nature nature;
|
||||||
|
+ struct bin_attribute *attr;
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * This is very basic.
|
||||||
|
+ *
|
||||||
|
+ * If an EEPROM is detected on the I2C bus (this only works for
|
||||||
|
+ * I2C EEPROMs) the notifier chain is called with
|
||||||
|
+ * both the I2C information and the kobject for the sysfs
|
||||||
|
+ * device which has been registers. It is then possible to
|
||||||
|
+ * read from the device via the bin_attribute::read method
|
||||||
|
+ * to extract configuration information.
|
||||||
|
+ *
|
||||||
|
+ * Register the notifier in the board level code, there is no
|
||||||
|
+ * need to unregister it but you can if you want (it will save
|
||||||
|
+ * a little bit or kernel memory to do so).
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+extern int register_eeprom_notifier(struct notifier_block *nb);
|
||||||
|
+extern int unregister_eeprom_notifier(struct notifier_block *nb);
|
||||||
|
+
|
||||||
|
+#endif /* _LINUX_EEPROM_H */
|
||||||
|
Index: linux-2.6.19/include/linux/notifier.h
|
||||||
|
===================================================================
|
||||||
|
--- linux-2.6.19.orig/include/linux/notifier.h
|
||||||
|
+++ linux-2.6.19/include/linux/notifier.h
|
||||||
|
@@ -187,5 +187,8 @@ extern int srcu_notifier_call_chain(stru
|
||||||
|
#define CPU_DOWN_FAILED 0x0006 /* CPU (unsigned)v NOT going down */
|
||||||
|
#define CPU_DEAD 0x0007 /* CPU (unsigned)v dead */
|
||||||
|
|
||||||
|
+/* eeprom notifier chain */
|
||||||
|
+#define EEPROM_REGISTER 0x0001
|
||||||
|
+
|
||||||
|
#endif /* __KERNEL__ */
|
||||||
|
#endif /* _LINUX_NOTIFIER_H */
|
||||||
Loading…
Reference in a new issue