ipq806x: ipq4019: add ap-dk01.1-c1 board support
AP-DK01.1-C1 is QCA dev board with: - ipq4018 quad core ARM @716.8MHz, 2x2 dual (11n+11ac) radio - 256MB RAM - 32MB SPI flash - QCA8075 multiport ethernet phy (WAN port, 4x LAN ports) First installation via u-boot: sf probe sf erase 0x180000 0x1a00000 tftpboot 0x84000000 lede-ipq806x-AP-DK01.1-C1-squashfs-sysupgrade.bin sf write 0x84000000 0x180000 $filesize Further upgrades via sysupgrade. Changes: - add partitions - set memory size to 256MB - add reserved memory mapping - add correct compatible string - add image generation - extract pre-cal data from ART partition Compile and run tested. Wirespeed NAT can be achieved with spreading rx interrupts over different cores. Wifi speed is ~550Mbps @5GHz in open air. Note: AP-DK01.1-C1 is fully compatible with AP-DK01.2-C1, which has ipq4028 instead of ipq4018 on board. Changes since v2: - based on dts(i) rework/cleanup submitted: http://lists.infradead.org/pipermail/lede-dev/2017-October/009596.html - precise reserved memory mapping - more precise description - compatible string Signed-off-by: Roman Yeryomin <roman@advem.lv>
This commit is contained in:
Roman Yeryomin
John Crispin
parent
a22e2bd37d
commit
156f2df879
5 changed files with 151 additions and 1 deletions
|
|
@ -47,6 +47,9 @@ board=$(board_name)
|
||||||
case "$FIRMWARE" in
|
case "$FIRMWARE" in
|
||||||
"ath10k/pre-cal-ahb-a000000.wifi.bin")
|
"ath10k/pre-cal-ahb-a000000.wifi.bin")
|
||||||
case "$board" in
|
case "$board" in
|
||||||
|
ap-dk01.1-c1)
|
||||||
|
ath10kcal_extract "ART" 4096 12064
|
||||||
|
;;
|
||||||
fritz4040)
|
fritz4040)
|
||||||
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
|
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
|
||||||
;;
|
;;
|
||||||
|
|
@ -54,6 +57,9 @@ case "$FIRMWARE" in
|
||||||
;;
|
;;
|
||||||
"ath10k/pre-cal-ahb-a800000.wifi.bin")
|
"ath10k/pre-cal-ahb-a800000.wifi.bin")
|
||||||
case "$board" in
|
case "$board" in
|
||||||
|
ap-dk01.1-c1)
|
||||||
|
ath10kcal_extract "ART" 20480 12064
|
||||||
|
;;
|
||||||
fritz4040)
|
fritz4040)
|
||||||
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
|
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
|
||||||
;;
|
;;
|
||||||
|
|
|
||||||
|
|
@ -14,6 +14,9 @@ ipq806x_board_detect() {
|
||||||
machine=$(cat /proc/device-tree/model)
|
machine=$(cat /proc/device-tree/model)
|
||||||
|
|
||||||
case "$machine" in
|
case "$machine" in
|
||||||
|
*"AP-DK01.1-C1")
|
||||||
|
name="ap-dk01.1-c1"
|
||||||
|
;;
|
||||||
*"AP148")
|
*"AP148")
|
||||||
name="ap148"
|
name="ap148"
|
||||||
;;
|
;;
|
||||||
|
|
|
||||||
|
|
@ -251,6 +251,22 @@ define Device/VR2600v
|
||||||
IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
|
IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
|
||||||
endef
|
endef
|
||||||
|
|
||||||
|
define Device/AP-DK01.1-C1
|
||||||
|
PROFILES += $$(DEVICE_NAME)
|
||||||
|
DEVICE_TITLE := QCA AP-DK01.1-C1
|
||||||
|
BOARD_NAME := ap-dk01.1-c1
|
||||||
|
DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
|
||||||
|
KERNEL_LOADADDR := 0x80208000
|
||||||
|
KERNEL_INSTALL := 1
|
||||||
|
KERNEL_SIZE := 4096k
|
||||||
|
IMAGE_SIZE := 26624k
|
||||||
|
FILESYSTEMS := squashfs
|
||||||
|
$(call Device/FitImage)
|
||||||
|
IMAGES := sysupgrade.bin
|
||||||
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
|
||||||
|
DEVICE_PACKAGES := ath10k-firmware-qca4019
|
||||||
|
endef
|
||||||
|
|
||||||
define Device/AP-DK04.1-C1
|
define Device/AP-DK04.1-C1
|
||||||
$(call Device/FitImage)
|
$(call Device/FitImage)
|
||||||
$(call Device/UbiFit)
|
$(call Device/UbiFit)
|
||||||
|
|
@ -265,6 +281,6 @@ define Device/AP-DK04.1-C1
|
||||||
endef
|
endef
|
||||||
|
|
||||||
TARGET_DEVICES += AP148 AP148-legacy C2600 D7800 DB149 EA8500 FRITZ4040 R7500 \
|
TARGET_DEVICES += AP148 AP148-legacy C2600 D7800 DB149 EA8500 FRITZ4040 R7500 \
|
||||||
R7500v2 R7800 NBG6817 VR2600v AP-DK04.1-C1
|
R7500v2 R7800 NBG6817 VR2600v AP-DK01.1-C1 AP-DK04.1-C1
|
||||||
|
|
||||||
$(eval $(call BuildImage))
|
$(eval $(call BuildImage))
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,115 @@
|
||||||
|
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
|
||||||
|
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
|
||||||
|
@@ -19,4 +19,112 @@
|
||||||
|
/ {
|
||||||
|
model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
|
||||||
|
|
||||||
|
+ memory {
|
||||||
|
+ device_type = "memory";
|
||||||
|
+ reg = <0x80000000 0x10000000>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ reserved-memory {
|
||||||
|
+ #address-cells = <0x1>;
|
||||||
|
+ #size-cells = <0x1>;
|
||||||
|
+ ranges;
|
||||||
|
+
|
||||||
|
+ apps_bl@87000000 {
|
||||||
|
+ reg = <0x87000000 0x400000>;
|
||||||
|
+ no-map;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ sbl@87400000 {
|
||||||
|
+ reg = <0x87400000 0x100000>;
|
||||||
|
+ no-map;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ cnss_debug@87500000 {
|
||||||
|
+ reg = <0x87500000 0x600000>;
|
||||||
|
+ no-map;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ cpu_context_dump@87b00000 {
|
||||||
|
+ reg = <0x87b00000 0x080000>;
|
||||||
|
+ no-map;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ tz_apps@87b80000 {
|
||||||
|
+ reg = <0x87b80000 0x280000>;
|
||||||
|
+ no-map;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ smem@87e00000 {
|
||||||
|
+ reg = <0x87e00000 0x080000>;
|
||||||
|
+ no-map;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ tz@87e80000 {
|
||||||
|
+ reg = <0x87e80000 0x180000>;
|
||||||
|
+ no-map;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&spi_0 {
|
||||||
|
+ mx25l25635f@0 {
|
||||||
|
+ compatible = "mx25l25635f", "jedec,spi-nor";
|
||||||
|
+ #address-cells = <1>;
|
||||||
|
+ #size-cells = <1>;
|
||||||
|
+ reg = <0>;
|
||||||
|
+ spi-max-frequency = <24000000>;
|
||||||
|
+
|
||||||
|
+ SBL1@0 {
|
||||||
|
+ label = "SBL1";
|
||||||
|
+ reg = <0x0 0x40000>;
|
||||||
|
+ read-only;
|
||||||
|
+ };
|
||||||
|
+ MIBIB@40000 {
|
||||||
|
+ label = "MIBIB";
|
||||||
|
+ reg = <0x40000 0x20000>;
|
||||||
|
+ read-only;
|
||||||
|
+ };
|
||||||
|
+ QSEE@60000 {
|
||||||
|
+ label = "QSEE";
|
||||||
|
+ reg = <0x60000 0x60000>;
|
||||||
|
+ read-only;
|
||||||
|
+ };
|
||||||
|
+ CDT@c0000 {
|
||||||
|
+ label = "CDT";
|
||||||
|
+ reg = <0xc0000 0x10000>;
|
||||||
|
+ read-only;
|
||||||
|
+ };
|
||||||
|
+ DDRPARAMS@d0000 {
|
||||||
|
+ label = "DDRPARAMS";
|
||||||
|
+ reg = <0xd0000 0x10000>;
|
||||||
|
+ read-only;
|
||||||
|
+ };
|
||||||
|
+ APPSBLENV@e0000 {
|
||||||
|
+ label = "APPSBLENV";
|
||||||
|
+ reg = <0xe0000 0x10000>;
|
||||||
|
+ read-only;
|
||||||
|
+ };
|
||||||
|
+ APPSBL@f0000 {
|
||||||
|
+ label = "APPSBL";
|
||||||
|
+ reg = <0xf0000 0x80000>;
|
||||||
|
+ read-only;
|
||||||
|
+ };
|
||||||
|
+ ART@170000 {
|
||||||
|
+ label = "ART";
|
||||||
|
+ reg = <0x170000 0x10000>;
|
||||||
|
+ read-only;
|
||||||
|
+ };
|
||||||
|
+ kernel@180000 {
|
||||||
|
+ label = "kernel";
|
||||||
|
+ reg = <0x180000 0x400000>;
|
||||||
|
+ };
|
||||||
|
+ rootfs@580000 {
|
||||||
|
+ label = "rootfs";
|
||||||
|
+ reg = <0x580000 0x1600000>;
|
||||||
|
+ };
|
||||||
|
+ firmware@180000 {
|
||||||
|
+ label = "firmware";
|
||||||
|
+ reg = <0x180000 0x1a00000>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,10 @@
|
||||||
|
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
|
||||||
|
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
|
||||||
|
@@ -18,6 +18,7 @@
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
|
||||||
|
+ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019";
|
||||||
|
|
||||||
|
memory {
|
||||||
|
device_type = "memory";
|
||||||
Loading…
Reference in a new issue