ar71xx: add support for the Airtight C-60
This patch adds support for the Airtight C-60.
SOC: Atheros AR9344 rev 2 (CPU:560.000MHz)
RAM: 128 MiB
NOR: MX25L3205D 4MiB
NAND: ST Micro NAND 32MiB 3,3V 8-bit
SW-NET: AR8327N (2 Ports)
WLAN1: Dual-Band AR9340 Rev:2 (built-in SoC)
WLAN2: Dual-Band AR9300 Rev:4 PCIe Chip
The switch is setup for an accesspoint:
LAN1: (gigabit) is the wan-port.
LAN2: (fast ethernet) is bridged with the br-lan.
Flashing Guide (via initramfs):
1. Connect a PC to the serial port of the C-60.
power up the C-60.
Enter u-boot command prompt:
#> nand erase
#> setenv bootcmd "bootm 0x9f060000"
#> saveenv
#> setenv ipaddr 192.168.1.1
#> setenv netmask 255.255.255.0
#> setenv serverip 192.168.1.100
#> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin
#> tftpboot
#> bootm
2. Wait for the C-60 to boot LEDE.
On the root prompt. Enter:
# ubiformat /dev/mtd4
# ubiattach -p /dev/mtd4
3. After that copy the sysupgrade.tar onto the router and run:
# sysupgrade sysupgrade.tar
to flash the image.
Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided
a C-60 unit and he helped with debugging the switch, LEDs and platfrom
support.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
Christian Lamparter
John Crispin
parent
e9455c561d
commit
098f7156cc
13 changed files with 260 additions and 14 deletions
|
|
@ -92,6 +92,10 @@ c-55)
|
|||
ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "$board:amber:wlan" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "$board:green:wlan" "phy1tpt"
|
||||
;;
|
||||
c-60)
|
||||
ucidef_set_led_wlan "wlan1_green" "WLAN1_GREEN" "$board:green:wlan1" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan2_green" "WLAN2_GREEN" "$board:green:wlan2" "phy1tpt"
|
||||
;;
|
||||
cap4200ag)
|
||||
ucidef_set_led_default "lan_green" "LAN_GREEN" "senao:green:lan" "1"
|
||||
ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "senao:amber:wlan" "phy0tpt"
|
||||
|
|
|
|||
|
|
@ -199,6 +199,10 @@ ar71xx_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "1:lan" "3:lan"
|
||||
;;
|
||||
c-60)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "3:wan" "4:lan"
|
||||
;;
|
||||
cap324)
|
||||
ucidef_set_interface_lan "eth0" "dhcp"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -73,7 +73,8 @@ get_status_led() {
|
|||
cap324)
|
||||
status_led="pcs:green:power"
|
||||
;;
|
||||
c-55)
|
||||
c-55|\
|
||||
c-60)
|
||||
status_led="$board:green:pwr"
|
||||
;;
|
||||
cap4200ag)
|
||||
|
|
|
|||
|
|
@ -53,7 +53,8 @@ board=$(ar71xx_board_name)
|
|||
case "$FIRMWARE" in
|
||||
"soc_wmac.eeprom")
|
||||
case $board in
|
||||
c-55)
|
||||
c-55|\
|
||||
c-60)
|
||||
ath9k_eeprom_extract "art" 4096 2048
|
||||
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0) +1)
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -482,6 +482,9 @@ ar71xx_board_detect() {
|
|||
*C-55)
|
||||
name="c-55"
|
||||
;;
|
||||
*C-60)
|
||||
name="c-60"
|
||||
;;
|
||||
*CAP4200AG)
|
||||
name="cap4200ag"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -22,7 +22,8 @@ fetch_mac_from_mtd() {
|
|||
|
||||
preinit_set_mac_address() {
|
||||
case $(ar71xx_board_name) in
|
||||
c-55)
|
||||
c-55|\
|
||||
c-60)
|
||||
mac_lan=$(mtd_get_mac_binary art 0)
|
||||
[ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -424,6 +424,14 @@ platform_check_image() {
|
|||
tew-673gru)
|
||||
dir825b_check_image "$1" && return 0
|
||||
;;
|
||||
c-60|\
|
||||
nbg6716|\
|
||||
r6100|\
|
||||
wndr3700v4|\
|
||||
wndr4300)
|
||||
nand_do_platform_check $board $1
|
||||
return $?
|
||||
;;
|
||||
cpe210|\
|
||||
cpe510)
|
||||
tplink_pharos_check_image "$1" && return 0
|
||||
|
|
@ -485,13 +493,6 @@ platform_check_image() {
|
|||
|
||||
return 0
|
||||
;;
|
||||
nbg6716|\
|
||||
r6100|\
|
||||
wndr3700v4|\
|
||||
wndr4300)
|
||||
nand_do_platform_check $board $1
|
||||
return $?
|
||||
;;
|
||||
tube2h)
|
||||
alfa_check_image "$1" && return 0
|
||||
return 1
|
||||
|
|
@ -537,16 +538,17 @@ platform_pre_upgrade() {
|
|||
local board=$(ar71xx_board_name)
|
||||
|
||||
case "$board" in
|
||||
mr18|\
|
||||
z1)
|
||||
merakinand_do_upgrade "$1"
|
||||
;;
|
||||
c-60|\
|
||||
nbg6716|\
|
||||
r6100|\
|
||||
wndr3700v4|\
|
||||
wndr4300)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
mr18|\
|
||||
z1)
|
||||
merakinand_do_upgrade "$1"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -56,6 +56,7 @@ CONFIG_ATH79_MACH_AW_NR580=y
|
|||
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
|
||||
CONFIG_ATH79_MACH_BSB=y
|
||||
CONFIG_ATH79_MACH_C55=y
|
||||
CONFIG_ATH79_MACH_C60=y
|
||||
CONFIG_ATH79_MACH_CAP324=y
|
||||
CONFIG_ATH79_MACH_CAP4200AG=y
|
||||
CONFIG_ATH79_MACH_CARAMBOLA2=y
|
||||
|
|
|
|||
|
|
@ -210,6 +210,18 @@ config ATH79_MACH_C55
|
|||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_C60
|
||||
bool "AirTight Networks C-60 support"
|
||||
select SOC_AR934X
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_WMAC
|
||||
select ATH79_DEV_NFC
|
||||
select ATH79_DEV_USB
|
||||
|
||||
config ATH79_MACH_AW_NR580
|
||||
bool "AzureWave AW-NR580 board support"
|
||||
select SOC_AR71XX
|
||||
|
|
|
|||
|
|
@ -62,6 +62,7 @@ obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
|
|||
obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A) += mach-bhu-bxu2000n2-a.o
|
||||
obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o
|
||||
obj-$(CONFIG_ATH79_MACH_C55) += mach-c55.o
|
||||
obj-$(CONFIG_ATH79_MACH_C60) += mach-c60.o
|
||||
obj-$(CONFIG_ATH79_MACH_CAP324) += mach-cap324.o
|
||||
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
|
||||
obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
|
||||
|
|
|
|||
200
target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c
Normal file
200
target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c
Normal file
|
|
@ -0,0 +1,200 @@
|
|||
/*
|
||||
* AirTight Networks C-60 board support
|
||||
*
|
||||
* Copyright (C) 2016 Christian Lamparter <chunkeey@googlemail.com>
|
||||
*
|
||||
* Based on AirTight Networks C-55 board support
|
||||
*
|
||||
* Copyright (C) 2014-2015 Chris Blake <chrisrblake93@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/platform/ar934x_nfc.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "pci.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-nfc.h"
|
||||
#include "machtypes.h"
|
||||
|
||||
#define C60_GPIO_LED_PWR_AMBER 11
|
||||
#define C60_GPIO_LED_WLAN2_GREEN 12
|
||||
#define C60_GPIO_LED_WLAN2_AMBER 13
|
||||
#define C60_GPIO_LED_PWR_GREEN 16
|
||||
|
||||
#define C60_GPIO_BTN_RESET 17
|
||||
|
||||
/* GPIOs of the AR9300 PCIe chip */
|
||||
#define C60_GPIO_WMAC_LED_WLAN1_AMBER 0
|
||||
#define C60_GPIO_WMAC_LED_WLAN1_GREEN 3
|
||||
|
||||
#define C60_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define C60_KEYS_DEBOUNCE_INTERVAL (3 * C60_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define C60_ART_ADDR 0x1f7f0000
|
||||
#define C60_ART_SIZE 0xffff
|
||||
#define C60_MAC_OFFSET 0
|
||||
#define C60_WMAC_CALDATA_OFFSET 0x1000
|
||||
#define C60_PCIE_CALDATA_OFFSET 0x5000
|
||||
|
||||
static struct gpio_led c60_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "c-60:amber:pwr",
|
||||
.gpio = C60_GPIO_LED_PWR_AMBER,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "c-60:green:pwr",
|
||||
.gpio = C60_GPIO_LED_PWR_GREEN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "c-60:green:wlan2",
|
||||
.gpio = C60_GPIO_LED_WLAN2_GREEN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "c-60:amber:wlan2",
|
||||
.gpio = C60_GPIO_LED_WLAN2_AMBER,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button c60_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "Reset button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = C60_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = C60_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct ar8327_pad_cfg c60_ar8327_pad0_cfg = {
|
||||
.mode = AR8327_PAD_MAC_RGMII,
|
||||
.txclk_delay_en = true,
|
||||
.rxclk_delay_en = true,
|
||||
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
||||
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
||||
};
|
||||
|
||||
static struct ar8327_platform_data c60_ar8327_data = {
|
||||
.pad0_cfg = &c60_ar8327_pad0_cfg,
|
||||
.port0_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct mdio_board_info c60_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &c60_ar8327_data,
|
||||
},
|
||||
};
|
||||
|
||||
static struct nand_ecclayout c60_nand_ecclayout = {
|
||||
.eccbytes = 7,
|
||||
.eccpos = { 4, 8, 9, 10, 13, 14, 15 },
|
||||
.oobavail = 9,
|
||||
.oobfree = { { 0, 3 }, { 6, 2 }, { 11, 2 }, }
|
||||
};
|
||||
|
||||
static int c60_nand_scan_fixup(struct mtd_info *mtd)
|
||||
{
|
||||
struct nand_chip *chip = mtd->priv;
|
||||
|
||||
chip->ecc.size = 512;
|
||||
chip->ecc.strength = 4;
|
||||
chip->ecc.layout = &c60_nand_ecclayout;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct gpio_led c60_wmac0_leds_gpio[] = {
|
||||
{
|
||||
.name = "c-60:amber:wlan1",
|
||||
.gpio = C60_GPIO_WMAC_LED_WLAN1_AMBER,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "c-60:green:wlan1",
|
||||
.gpio = C60_GPIO_WMAC_LED_WLAN1_GREEN,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init c60_setup(void)
|
||||
{
|
||||
u8 tmpmac[6];
|
||||
u8 *art = (u8 *) KSEG1ADDR(C60_ART_ADDR);
|
||||
|
||||
/* NAND */
|
||||
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_SOFT_BCH);
|
||||
ath79_nfc_set_scan_fixup(c60_nand_scan_fixup);
|
||||
ath79_register_nfc();
|
||||
|
||||
/* SPI Storage*/
|
||||
ath79_register_m25p80_large(NULL);
|
||||
|
||||
/* AR8327 Switch Ethernet */
|
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
|
||||
|
||||
mdiobus_register_board_info(c60_mdio0_info,
|
||||
ARRAY_SIZE(c60_mdio0_info));
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
/* GMAC0 is connected to an AR8327N switch */
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, art + C60_MAC_OFFSET, 0);
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_eth0_pll_data.pll_1000 = 0x06000000;
|
||||
ath79_register_eth(0);
|
||||
|
||||
/* LEDs & GPIO */
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(c60_leds_gpio),
|
||||
c60_leds_gpio);
|
||||
ath79_register_gpio_keys_polled(-1, C60_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(c60_gpio_keys),
|
||||
c60_gpio_keys);
|
||||
ap9x_pci_setup_wmac_leds(0, c60_wmac0_leds_gpio,
|
||||
ARRAY_SIZE(c60_wmac0_leds_gpio));
|
||||
/* USB */
|
||||
ath79_register_usb();
|
||||
|
||||
/* WiFi */
|
||||
ath79_init_mac(tmpmac, art + C60_MAC_OFFSET, 1);
|
||||
ap91_pci_init(art + C60_PCIE_CALDATA_OFFSET, tmpmac);
|
||||
ath79_init_mac(tmpmac, art + C60_MAC_OFFSET, 2);
|
||||
ath79_register_wmac(art + C60_WMAC_CALDATA_OFFSET, tmpmac);
|
||||
}
|
||||
MIPS_MACHINE(ATH79_MACH_C60, "C-60", "AirTight Networks C-60",
|
||||
c60_setup);
|
||||
|
|
@ -47,6 +47,7 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
|
||||
ATH79_MACH_BSB, /* Smart Electronics Black Swift board */
|
||||
ATH79_MACH_C55, /* AirTight Networks C-55 */
|
||||
ATH79_MACH_C60, /* AirTight Networks C-60 */
|
||||
ATH79_MACH_CAP324, /* PowerCloud CAP324 */
|
||||
ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
|
||||
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
|
||||
|
|
|
|||
|
|
@ -1,3 +1,18 @@
|
|||
define Device/c-60
|
||||
DEVICE_TITLE := AirTight C-60
|
||||
DEVICE_PACKAGES := kmod-spi-gpio kmod-usb-core kmod-usb2 kmod-ath9k
|
||||
BOARDNAME = C-60
|
||||
BLOCKSIZE := 64k
|
||||
KERNEL_SIZE = 3648k
|
||||
IMAGE_SIZE = 32m
|
||||
IMAGES := sysupgrade.tar
|
||||
MTDPARTS = spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,3648k(kernel),64k(art)ro;ar934x-nfc:32m(ubi)
|
||||
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
|
||||
IMAGE/sysupgrade.tar := sysupgrade-tar
|
||||
endef
|
||||
|
||||
TARGET_DEVICES += c-60
|
||||
|
||||
define Build/MerakiNAND
|
||||
-$(STAGING_DIR_HOST)/bin/mkmerakifw \
|
||||
-B $(BOARDNAME) -s \
|
||||
|
|
|
|||
Loading…
Reference in a new issue