iw: update nl80211.h
Now this file matches the version in backports. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
parent
4fcbad1aa0
commit
02e7fa6f8a
1 changed files with 607 additions and 17 deletions
|
@ -1,39 +1,629 @@
|
|||
diff --git a/nl80211.h b/nl80211.h
|
||||
index c587a61..255a971 100644
|
||||
--- a/nl80211.h
|
||||
+++ b/nl80211.h
|
||||
@@ -2153,6 +2153,9 @@ enum nl80211_commands {
|
||||
@@ -11,6 +11,7 @@
|
||||
* Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
|
||||
* Copyright 2008 Colin McCabe <colin@cozybit.com>
|
||||
* Copyright 2015-2017 Intel Deutschland GmbH
|
||||
+ * Copyright (C) 2018 Intel Corporation
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
@@ -203,7 +204,8 @@
|
||||
* FILS shared key authentication offload should be able to construct the
|
||||
* authentication and association frames for FILS shared key authentication and
|
||||
* eventually do a key derivation as per IEEE 802.11ai. The below additional
|
||||
- * parameters should be given to driver in %NL80211_CMD_CONNECT.
|
||||
+ * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in
|
||||
+ * %NL80211_CMD_UPDATE_CONNECT_PARAMS.
|
||||
* %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
|
||||
* %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
|
||||
* %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
|
||||
@@ -214,7 +216,8 @@
|
||||
* as specified in IETF RFC 6696.
|
||||
*
|
||||
* When FILS shared key authentication is completed, driver needs to provide the
|
||||
- * below additional parameters to userspace.
|
||||
+ * below additional parameters to userspace, which can be either after setting
|
||||
+ * up a connection or after roaming.
|
||||
* %NL80211_ATTR_FILS_KEK - used for key renewal
|
||||
* %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
|
||||
* %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
|
||||
@@ -542,7 +545,8 @@
|
||||
* IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
|
||||
* %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
|
||||
* %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
|
||||
- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and
|
||||
+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
|
||||
+ * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
|
||||
* %NL80211_ATTR_WIPHY_FREQ_HINT.
|
||||
* If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
|
||||
* restrictions on BSS selection, i.e., they effectively prevent roaming
|
||||
@@ -977,21 +981,58 @@
|
||||
* only the %NL80211_ATTR_IE data is used and updated with this command.
|
||||
*
|
||||
* @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
|
||||
- * for the given authenticator address (specified with &NL80211_ATTR_MAC).
|
||||
- * When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the
|
||||
+ * for the given authenticator address (specified with %NL80211_ATTR_MAC).
|
||||
+ * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the
|
||||
* PMK-R0, otherwise it specifies the PMK.
|
||||
* @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
|
||||
* configured PMK for the authenticator address identified by
|
||||
- * &NL80211_ATTR_MAC.
|
||||
+ * %NL80211_ATTR_MAC.
|
||||
* @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
|
||||
* handshake was completed successfully by the driver. The BSSID is
|
||||
- * specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake
|
||||
+ * specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake
|
||||
* offload should send this event after indicating 802.11 association with
|
||||
- * &NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed
|
||||
- * &NL80211_CMD_DISCONNECT should be indicated instead.
|
||||
+ * %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed
|
||||
+ * %NL80211_CMD_DISCONNECT should be indicated instead.
|
||||
+ *
|
||||
+ * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
|
||||
+ * and RX notification. This command is used both as a request to transmit
|
||||
+ * a control port frame and as a notification that a control port frame
|
||||
+ * has been received. %NL80211_ATTR_FRAME is used to specify the
|
||||
+ * frame contents. The frame is the raw EAPoL data, without ethernet or
|
||||
+ * 802.11 headers.
|
||||
+ * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
|
||||
+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added
|
||||
+ * indicating the protocol type of the received frame; whether the frame
|
||||
+ * was received unencrypted and the MAC address of the peer respectively.
|
||||
*
|
||||
* @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
|
||||
*
|
||||
+ * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host
|
||||
+ * drivers that do not define separate commands for authentication and
|
||||
+ * association, but rely on user space for the authentication to happen.
|
||||
+ * This interface acts both as the event request (driver to user space)
|
||||
+ * to trigger the authentication and command response (userspace to
|
||||
+ * driver) to indicate the authentication status.
|
||||
+ *
|
||||
+ * User space uses the %NL80211_CMD_CONNECT command to the host driver to
|
||||
+ * trigger a connection. The host driver selects a BSS and further uses
|
||||
+ * this interface to offload only the authentication part to the user
|
||||
+ * space. Authentication frames are passed between the driver and user
|
||||
+ * space through the %NL80211_CMD_FRAME interface. Host driver proceeds
|
||||
+ * further with the association after getting successful authentication
|
||||
+ * status. User space indicates the authentication status through
|
||||
+ * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
|
||||
+ * command interface.
|
||||
+ *
|
||||
+ * Host driver reports this status on an authentication failure to the
|
||||
+ * user space through the connect result as the user space would have
|
||||
+ * initiated the connection through the connect request.
|
||||
+ *
|
||||
+ * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
|
||||
+ * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE,
|
||||
+ * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its
|
||||
+ * address(specified in %NL80211_ATTR_MAC).
|
||||
+ *
|
||||
* @NL80211_CMD_MAX: highest used command number
|
||||
* @__NL80211_CMD_AFTER_LAST: internal use
|
||||
*/
|
||||
@@ -1198,6 +1239,12 @@ enum nl80211_commands {
|
||||
|
||||
NL80211_CMD_RELOAD_REGDB,
|
||||
|
||||
+ NL80211_CMD_EXTERNAL_AUTH,
|
||||
+
|
||||
+ NL80211_CMD_STA_OPMODE_CHANGED,
|
||||
+
|
||||
+ NL80211_CMD_CONTROL_PORT_FRAME,
|
||||
+
|
||||
/* add new commands above here */
|
||||
|
||||
/* used to define NL80211_CMD_MAX below */
|
||||
@@ -1445,6 +1492,15 @@ enum nl80211_commands {
|
||||
* @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
|
||||
* %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
|
||||
* ethertype frames used for key negotiation must not be encrypted.
|
||||
+ * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control
|
||||
+ * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE)
|
||||
+ * will be sent directly to the network interface or sent via the NL80211
|
||||
+ * socket. If this attribute is missing, then legacy behavior of sending
|
||||
+ * control port frames directly to the network interface is used. If the
|
||||
+ * flag is included, then control port frames are sent over NL80211 instead
|
||||
+ * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is
|
||||
+ * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
|
||||
+ * flag.
|
||||
*
|
||||
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
|
||||
* We recommend using nested, driver-specific attributes within this.
|
||||
@@ -1932,6 +1988,12 @@ enum nl80211_commands {
|
||||
* multicast group.
|
||||
* If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
|
||||
* station will deauthenticate when the socket is closed.
|
||||
+ * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically
|
||||
+ * torn down when the socket is closed.
|
||||
+ * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be
|
||||
+ * automatically torn down when the socket is closed.
|
||||
+ * If set during %NL80211_CMD_START_AP the AP will be automatically
|
||||
+ * disabled when the socket is closed.
|
||||
*
|
||||
* @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
|
||||
* the TDLS link initiator.
|
||||
@@ -2153,6 +2215,35 @@ enum nl80211_commands {
|
||||
* @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
|
||||
* @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
|
||||
*
|
||||
+ * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
|
||||
+ * authentication operation (u32 attribute with an
|
||||
+ * &enum nl80211_external_auth_action value). This is used with the
|
||||
+ * %NL80211_CMD_EXTERNAL_AUTH request event.
|
||||
+ * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
|
||||
+ * space supports external authentication. This attribute shall be used
|
||||
+ * only with %NL80211_CMD_CONNECT request. The driver may offload
|
||||
+ * authentication processing to user space if this capability is indicated
|
||||
+ * in NL80211_CMD_CONNECT requests from the user space.
|
||||
+ *
|
||||
+ * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this
|
||||
+ * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
|
||||
+ *
|
||||
+ * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum
|
||||
+ * nl80211_txq_stats)
|
||||
+ * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy.
|
||||
+ * The smaller of this and the memory limit is enforced.
|
||||
+ * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the
|
||||
+ * TXQ queues for this phy. The smaller of this and the packet limit is
|
||||
+ * enforced.
|
||||
+ * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes
|
||||
+ * a flow is assigned on each round of the DRR scheduler.
|
||||
+ * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from
|
||||
+ * association request when used with NL80211_CMD_NEW_STATION). Can be set
|
||||
+ * only if %NL80211_STA_FLAG_WME is set.
|
||||
+ *
|
||||
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
|
||||
+ * transmit power to stay within regulatory limits. u32, dBi.
|
||||
+ *
|
||||
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
|
||||
* @NL80211_ATTR_MAX: highest attribute number currently defined
|
||||
* @__NL80211_ATTR_AFTER_LAST: internal use
|
||||
@@ -2579,6 +2582,8 @@ enum nl80211_attrs {
|
||||
@@ -2579,6 +2670,23 @@ enum nl80211_attrs {
|
||||
NL80211_ATTR_PMKR0_NAME,
|
||||
NL80211_ATTR_PORT_AUTHORIZED,
|
||||
|
||||
+ NL80211_ATTR_EXTERNAL_AUTH_ACTION,
|
||||
+ NL80211_ATTR_EXTERNAL_AUTH_SUPPORT,
|
||||
+
|
||||
+ NL80211_ATTR_NSS,
|
||||
+ NL80211_ATTR_ACK_SIGNAL,
|
||||
+
|
||||
+ NL80211_ATTR_CONTROL_PORT_OVER_NL80211,
|
||||
+
|
||||
+ NL80211_ATTR_TXQ_STATS,
|
||||
+ NL80211_ATTR_TXQ_LIMIT,
|
||||
+ NL80211_ATTR_TXQ_MEMORY_LIMIT,
|
||||
+ NL80211_ATTR_TXQ_QUANTUM,
|
||||
+
|
||||
+ NL80211_ATTR_HE_CAPABILITY,
|
||||
+
|
||||
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
|
||||
+
|
||||
/* add attributes here, update the policy in nl80211.c */
|
||||
|
||||
__NL80211_ATTR_AFTER_LAST,
|
||||
@@ -3862,9 +3867,6 @@ enum nl80211_bss_scan_width {
|
||||
* @NL80211_BSS_PARENT_BSSID. (u64).
|
||||
* @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF
|
||||
* is set.
|
||||
- * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
|
||||
- * Contains a nested array of signal strength attributes (u8, dBm),
|
||||
- * using the nesting index as the antenna number.
|
||||
* @__NL80211_BSS_AFTER_LAST: internal
|
||||
* @NL80211_BSS_MAX: highest BSS attribute
|
||||
@@ -2618,6 +2726,8 @@ enum nl80211_attrs {
|
||||
#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
|
||||
#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
|
||||
|
||||
+#define NL80211_WIPHY_NAME_MAXLEN 64
|
||||
+
|
||||
#define NL80211_MAX_SUPP_RATES 32
|
||||
#define NL80211_MAX_SUPP_HT_RATES 77
|
||||
#define NL80211_MAX_SUPP_REG_RULES 64
|
||||
@@ -2626,7 +2736,8 @@ enum nl80211_attrs {
|
||||
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
|
||||
#define NL80211_HT_CAPABILITY_LEN 26
|
||||
#define NL80211_VHT_CAPABILITY_LEN 12
|
||||
-
|
||||
+#define NL80211_HE_MIN_CAPABILITY_LEN 16
|
||||
+#define NL80211_HE_MAX_CAPABILITY_LEN 51
|
||||
#define NL80211_MAX_NR_CIPHER_SUITES 5
|
||||
#define NL80211_MAX_NR_AKM_SUITES 2
|
||||
|
||||
@@ -2754,6 +2865,38 @@ struct nl80211_sta_flag_update {
|
||||
} __attribute__((packed));
|
||||
|
||||
/**
|
||||
+ * enum nl80211_he_gi - HE guard interval
|
||||
+ * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec
|
||||
+ * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec
|
||||
+ * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec
|
||||
+ */
|
||||
+enum nl80211_he_gi {
|
||||
+ NL80211_RATE_INFO_HE_GI_0_8,
|
||||
+ NL80211_RATE_INFO_HE_GI_1_6,
|
||||
+ NL80211_RATE_INFO_HE_GI_3_2,
|
||||
+};
|
||||
+
|
||||
+/**
|
||||
+ * enum nl80211_he_ru_alloc - HE RU allocation values
|
||||
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
|
||||
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation
|
||||
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation
|
||||
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation
|
||||
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation
|
||||
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation
|
||||
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation
|
||||
+ */
|
||||
+enum nl80211_he_ru_alloc {
|
||||
+ NL80211_RATE_INFO_HE_RU_ALLOC_26,
|
||||
+ NL80211_RATE_INFO_HE_RU_ALLOC_52,
|
||||
+ NL80211_RATE_INFO_HE_RU_ALLOC_106,
|
||||
+ NL80211_RATE_INFO_HE_RU_ALLOC_242,
|
||||
+ NL80211_RATE_INFO_HE_RU_ALLOC_484,
|
||||
+ NL80211_RATE_INFO_HE_RU_ALLOC_996,
|
||||
+ NL80211_RATE_INFO_HE_RU_ALLOC_2x996,
|
||||
+};
|
||||
+
|
||||
+/**
|
||||
* enum nl80211_rate_info - bitrate information
|
||||
*
|
||||
* These attribute types are used with %NL80211_STA_INFO_TXRATE
|
||||
@@ -2785,6 +2928,13 @@ struct nl80211_sta_flag_update {
|
||||
* @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
|
||||
* a legacy rate and will be reported as the actual bitrate, i.e.
|
||||
* a quarter of the base (20 MHz) rate
|
||||
+ * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11)
|
||||
+ * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8)
|
||||
+ * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
|
||||
+ * (u8, see &enum nl80211_he_gi)
|
||||
+ * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
|
||||
+ * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
|
||||
+ * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
|
||||
* @__NL80211_RATE_INFO_AFTER_LAST: internal use
|
||||
*/
|
||||
@@ -3888,7 +3890,6 @@ enum nl80211_bss {
|
||||
NL80211_BSS_PAD,
|
||||
NL80211_BSS_PARENT_TSF,
|
||||
NL80211_BSS_PARENT_BSSID,
|
||||
- NL80211_BSS_CHAIN_SIGNAL,
|
||||
enum nl80211_rate_info {
|
||||
@@ -2801,6 +2951,11 @@ enum nl80211_rate_info {
|
||||
NL80211_RATE_INFO_160_MHZ_WIDTH,
|
||||
NL80211_RATE_INFO_10_MHZ_WIDTH,
|
||||
NL80211_RATE_INFO_5_MHZ_WIDTH,
|
||||
+ NL80211_RATE_INFO_HE_MCS,
|
||||
+ NL80211_RATE_INFO_HE_NSS,
|
||||
+ NL80211_RATE_INFO_HE_GI,
|
||||
+ NL80211_RATE_INFO_HE_DCM,
|
||||
+ NL80211_RATE_INFO_HE_RU_ALLOC,
|
||||
|
||||
/* keep last */
|
||||
__NL80211_BSS_AFTER_LAST,
|
||||
__NL80211_RATE_INFO_AFTER_LAST,
|
||||
@@ -2899,6 +3054,9 @@ enum nl80211_sta_bss_param {
|
||||
* @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
|
||||
* received from the station (u64, usec)
|
||||
* @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
|
||||
+ * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
|
||||
+ * @NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG: avg signal strength of (data)
|
||||
+ * ACK frame (s8, dBm)
|
||||
* @__NL80211_STA_INFO_AFTER_LAST: internal
|
||||
* @NL80211_STA_INFO_MAX: highest possible station info attribute
|
||||
*/
|
||||
@@ -2937,6 +3095,8 @@ enum nl80211_sta_info {
|
||||
NL80211_STA_INFO_TID_STATS,
|
||||
NL80211_STA_INFO_RX_DURATION,
|
||||
NL80211_STA_INFO_PAD,
|
||||
+ NL80211_STA_INFO_ACK_SIGNAL,
|
||||
+ NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG,
|
||||
|
||||
/* keep last */
|
||||
__NL80211_STA_INFO_AFTER_LAST,
|
||||
@@ -2954,6 +3114,7 @@ enum nl80211_sta_info {
|
||||
* @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
|
||||
* MSDUs (u64)
|
||||
* @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
|
||||
+ * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)
|
||||
* @NUM_NL80211_TID_STATS: number of attributes here
|
||||
* @NL80211_TID_STATS_MAX: highest numbered attribute here
|
||||
*/
|
||||
@@ -2964,6 +3125,7 @@ enum nl80211_tid_stats {
|
||||
NL80211_TID_STATS_TX_MSDU_RETRIES,
|
||||
NL80211_TID_STATS_TX_MSDU_FAILED,
|
||||
NL80211_TID_STATS_PAD,
|
||||
+ NL80211_TID_STATS_TXQ_STATS,
|
||||
|
||||
/* keep last */
|
||||
NUM_NL80211_TID_STATS,
|
||||
@@ -2971,6 +3133,44 @@ enum nl80211_tid_stats {
|
||||
};
|
||||
|
||||
/**
|
||||
+ * enum nl80211_txq_stats - per TXQ statistics attributes
|
||||
+ * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved
|
||||
+ * @NUM_NL80211_TXQ_STATS: number of attributes here
|
||||
+ * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged
|
||||
+ * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently
|
||||
+ * backlogged
|
||||
+ * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen
|
||||
+ * @NL80211_TXQ_STATS_DROPS: total number of packet drops
|
||||
+ * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks
|
||||
+ * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow
|
||||
+ * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow
|
||||
+ * (only for per-phy stats)
|
||||
+ * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions
|
||||
+ * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ
|
||||
+ * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ
|
||||
+ * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY
|
||||
+ * @NL80211_TXQ_STATS_MAX: highest numbered attribute here
|
||||
+ */
|
||||
+enum nl80211_txq_stats {
|
||||
+ __NL80211_TXQ_STATS_INVALID,
|
||||
+ NL80211_TXQ_STATS_BACKLOG_BYTES,
|
||||
+ NL80211_TXQ_STATS_BACKLOG_PACKETS,
|
||||
+ NL80211_TXQ_STATS_FLOWS,
|
||||
+ NL80211_TXQ_STATS_DROPS,
|
||||
+ NL80211_TXQ_STATS_ECN_MARKS,
|
||||
+ NL80211_TXQ_STATS_OVERLIMIT,
|
||||
+ NL80211_TXQ_STATS_OVERMEMORY,
|
||||
+ NL80211_TXQ_STATS_COLLISIONS,
|
||||
+ NL80211_TXQ_STATS_TX_BYTES,
|
||||
+ NL80211_TXQ_STATS_TX_PACKETS,
|
||||
+ NL80211_TXQ_STATS_MAX_FLOWS,
|
||||
+
|
||||
+ /* keep last */
|
||||
+ NUM_NL80211_TXQ_STATS,
|
||||
+ NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1
|
||||
+};
|
||||
+
|
||||
+/**
|
||||
* enum nl80211_mpath_flags - nl80211 mesh path flags
|
||||
*
|
||||
* @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
|
||||
@@ -3022,6 +3222,38 @@ enum nl80211_mpath_info {
|
||||
};
|
||||
|
||||
/**
|
||||
+ * enum nl80211_band_iftype_attr - Interface type data attributes
|
||||
+ *
|
||||
+ * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
|
||||
+ * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
|
||||
+ * for each interface type that supports the band data
|
||||
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE
|
||||
+ * capabilities IE
|
||||
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE
|
||||
+ * capabilities IE
|
||||
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE
|
||||
+ * capabilities IE
|
||||
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
|
||||
+ * defined in HE capabilities IE
|
||||
+ * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
|
||||
+ * defined
|
||||
+ * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
|
||||
+ */
|
||||
+enum nl80211_band_iftype_attr {
|
||||
+ __NL80211_BAND_IFTYPE_ATTR_INVALID,
|
||||
+
|
||||
+ NL80211_BAND_IFTYPE_ATTR_IFTYPES,
|
||||
+ NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC,
|
||||
+ NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
|
||||
+ NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
|
||||
+ NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
|
||||
+
|
||||
+ /* keep last */
|
||||
+ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
|
||||
+ NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1
|
||||
+};
|
||||
+
|
||||
+/**
|
||||
* enum nl80211_band_attr - band attributes
|
||||
* @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
|
||||
* @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
|
||||
@@ -3036,6 +3268,8 @@ enum nl80211_mpath_info {
|
||||
* @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
|
||||
* defined in 802.11ac
|
||||
* @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
|
||||
+ * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
|
||||
+ * attributes from &enum nl80211_band_iftype_attr
|
||||
* @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
|
||||
* @__NL80211_BAND_ATTR_AFTER_LAST: internal use
|
||||
*/
|
||||
@@ -3051,6 +3285,7 @@ enum nl80211_band_attr {
|
||||
|
||||
NL80211_BAND_ATTR_VHT_MCS_SET,
|
||||
NL80211_BAND_ATTR_VHT_CAPA,
|
||||
+ NL80211_BAND_ATTR_IFTYPE_DATA,
|
||||
|
||||
/* keep last */
|
||||
__NL80211_BAND_ATTR_AFTER_LAST,
|
||||
@@ -3060,6 +3295,29 @@ enum nl80211_band_attr {
|
||||
#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
|
||||
|
||||
/**
|
||||
+ * enum nl80211_wmm_rule - regulatory wmm rule
|
||||
+ *
|
||||
+ * @__NL80211_WMMR_INVALID: attribute number 0 is reserved
|
||||
+ * @NL80211_WMMR_CW_MIN: Minimum contention window slot.
|
||||
+ * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
|
||||
+ * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
|
||||
+ * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
|
||||
+ * @nl80211_WMMR_MAX: highest possible wmm rule.
|
||||
+ * @__NL80211_WMMR_LAST: Internal use.
|
||||
+ */
|
||||
+enum nl80211_wmm_rule {
|
||||
+ __NL80211_WMMR_INVALID,
|
||||
+ NL80211_WMMR_CW_MIN,
|
||||
+ NL80211_WMMR_CW_MAX,
|
||||
+ NL80211_WMMR_AIFSN,
|
||||
+ NL80211_WMMR_TXOP,
|
||||
+
|
||||
+ /* keep last */
|
||||
+ __NL80211_WMMR_LAST,
|
||||
+ NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1
|
||||
+};
|
||||
+
|
||||
+/**
|
||||
* enum nl80211_frequency_attr - frequency attributes
|
||||
* @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
|
||||
* @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
|
||||
@@ -3108,6 +3366,9 @@ enum nl80211_band_attr {
|
||||
* on this channel in current regulatory domain.
|
||||
* @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
|
||||
* on this channel in current regulatory domain.
|
||||
+ * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations.
|
||||
+ * This is a nested attribute that contains the wmm limitation per AC.
|
||||
+ * (see &enum nl80211_wmm_rule)
|
||||
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
|
||||
* currently defined
|
||||
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
|
||||
@@ -3136,6 +3397,7 @@ enum nl80211_frequency_attr {
|
||||
NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
|
||||
NL80211_FREQUENCY_ATTR_NO_20MHZ,
|
||||
NL80211_FREQUENCY_ATTR_NO_10MHZ,
|
||||
+ NL80211_FREQUENCY_ATTR_WMM,
|
||||
|
||||
/* keep last */
|
||||
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
|
||||
@@ -3319,7 +3581,7 @@ enum nl80211_sched_scan_match_attr {
|
||||
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
|
||||
* base on contiguous rules and wider channels will be allowed to cross
|
||||
* multiple contiguous/overlapping frequency ranges.
|
||||
- * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT
|
||||
+ * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT
|
||||
* @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
|
||||
* @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
|
||||
* @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
|
||||
@@ -4945,6 +5207,27 @@ enum nl80211_feature_flags {
|
||||
* probe request tx deferral and suppression
|
||||
* @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
|
||||
* value in %NL80211_ATTR_USE_MFP.
|
||||
+ * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan.
|
||||
+ * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan.
|
||||
+ * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan.
|
||||
+ * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions.
|
||||
+ * Device or driver will do all DFS-related actions by itself,
|
||||
+ * informing user-space about CAC progress, radar detection event,
|
||||
+ * channel change triggered by radar detection event.
|
||||
+ * No need to start CAC from user-space, no need to react to
|
||||
+ * "radar detected" event.
|
||||
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and
|
||||
+ * receiving control port frames over nl80211 instead of the netdevice.
|
||||
+ * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: This Driver support data ack
|
||||
+ * rssi if firmware support, this flag is to intimate about ack rssi
|
||||
+ * support to nl80211.
|
||||
+ * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
|
||||
+ * TXQs.
|
||||
+ * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
|
||||
+ * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN.
|
||||
+ * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data
|
||||
+ * except for supported rates from the probe request content if requested
|
||||
+ * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
|
||||
*
|
||||
* @NUM_NL80211_EXT_FEATURES: number of extended features.
|
||||
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
|
||||
@@ -4972,6 +5255,15 @@ enum nl80211_ext_feature_index {
|
||||
NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
|
||||
NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
|
||||
NL80211_EXT_FEATURE_MFP_OPTIONAL,
|
||||
+ NL80211_EXT_FEATURE_LOW_SPAN_SCAN,
|
||||
+ NL80211_EXT_FEATURE_LOW_POWER_SCAN,
|
||||
+ NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
|
||||
+ NL80211_EXT_FEATURE_DFS_OFFLOAD,
|
||||
+ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
|
||||
+ NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT,
|
||||
+ NL80211_EXT_FEATURE_TXQS,
|
||||
+ NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
|
||||
+ NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
|
||||
|
||||
/* add new features before the definition below */
|
||||
NUM_NL80211_EXT_FEATURES,
|
||||
@@ -5032,6 +5324,10 @@ enum nl80211_timeout_reason {
|
||||
* of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
|
||||
* requests.
|
||||
*
|
||||
+ * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and
|
||||
+ * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only
|
||||
+ * one of them can be used in the request.
|
||||
+ *
|
||||
* @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
|
||||
* @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
|
||||
* @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
|
||||
@@ -5059,7 +5355,26 @@ enum nl80211_timeout_reason {
|
||||
* and suppression (if it has received a broadcast Probe Response frame,
|
||||
* Beacon frame or FILS Discovery frame from an AP that the STA considers
|
||||
* a suitable candidate for (re-)association - suitable in terms of
|
||||
- * SSID and/or RSSI
|
||||
+ * SSID and/or RSSI.
|
||||
+ * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to
|
||||
+ * accomplish the scan. Thus, this flag intends the driver to perform the
|
||||
+ * scan request with lesser span/duration. It is specific to the driver
|
||||
+ * implementations on how this is accomplished. Scan accuracy may get
|
||||
+ * impacted with this flag.
|
||||
+ * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume
|
||||
+ * optimal possible power. Drivers can resort to their specific means to
|
||||
+ * optimize the power. Scan accuracy may get impacted with this flag.
|
||||
+ * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan
|
||||
+ * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum
|
||||
+ * possible scan results. This flag hints the driver to use the best
|
||||
+ * possible scan configuration to improve the accuracy in scanning.
|
||||
+ * Latency and power use may get impacted with this flag.
|
||||
+ * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe
|
||||
+ * request frames from this scan to avoid correlation/tracking being
|
||||
+ * possible.
|
||||
+ * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
|
||||
+ * only have supported rates and no additional capabilities (unless
|
||||
+ * added by userspace explicitly.)
|
||||
*/
|
||||
enum nl80211_scan_flags {
|
||||
NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
|
||||
@@ -5070,6 +5385,11 @@ enum nl80211_scan_flags {
|
||||
NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5,
|
||||
NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6,
|
||||
NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7,
|
||||
+ NL80211_SCAN_FLAG_LOW_SPAN = 1<<8,
|
||||
+ NL80211_SCAN_FLAG_LOW_POWER = 1<<9,
|
||||
+ NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10,
|
||||
+ NL80211_SCAN_FLAG_RANDOM_SN = 1<<11,
|
||||
+ NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12,
|
||||
};
|
||||
|
||||
/**
|
||||
@@ -5127,6 +5447,8 @@ enum nl80211_smps_mode {
|
||||
* non-operating channel is expired and no longer valid. New CAC must
|
||||
* be done on this channel before starting the operation. This is not
|
||||
* applicable for ETSI dfs domain where pre-CAC is valid for ever.
|
||||
+ * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started,
|
||||
+ * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled.
|
||||
*/
|
||||
enum nl80211_radar_event {
|
||||
NL80211_RADAR_DETECTED,
|
||||
@@ -5134,6 +5456,7 @@ enum nl80211_radar_event {
|
||||
NL80211_RADAR_CAC_ABORTED,
|
||||
NL80211_RADAR_NOP_FINISHED,
|
||||
NL80211_RADAR_PRE_CAC_EXPIRED,
|
||||
+ NL80211_RADAR_CAC_STARTED,
|
||||
};
|
||||
|
||||
/**
|
||||
@@ -5425,11 +5748,11 @@ enum nl80211_nan_func_attributes {
|
||||
* @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
|
||||
* This is a flag.
|
||||
* @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
|
||||
- * &NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
|
||||
+ * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
|
||||
* @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
|
||||
- * &NL80211_NAN_SRF_BF is present. This is a u8.
|
||||
+ * %NL80211_NAN_SRF_BF is present. This is a u8.
|
||||
* @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
|
||||
- * and only if &NL80211_NAN_SRF_BF isn't present. This is a nested
|
||||
+ * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested
|
||||
* attribute. Each nested attribute is a MAC address.
|
||||
* @NUM_NL80211_NAN_SRF_ATTR: internal
|
||||
* @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
|
||||
@@ -5469,4 +5792,15 @@ enum nl80211_nan_match_attributes {
|
||||
NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
|
||||
};
|
||||
|
||||
+/**
|
||||
+ * nl80211_external_auth_action - Action to perform with external
|
||||
+ * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
|
||||
+ * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
|
||||
+ * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
|
||||
+ */
|
||||
+enum nl80211_external_auth_action {
|
||||
+ NL80211_EXTERNAL_AUTH_START,
|
||||
+ NL80211_EXTERNAL_AUTH_ABORT,
|
||||
+};
|
||||
+
|
||||
#endif /* __LINUX_NL80211_H */
|
||||
|
|
Loading…
Reference in a new issue