KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ar71xx: add support for YunCore AP90Q

Browse source 
YunCore AP90Q is an outdoor CPE/AP based on Qualcomm/Atheros QCA9531 v2.
Short specification:

- 650/600/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, passive PoE support
- 64/128 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz with external PA, up to 29 dBm
- 2x internal 5 dBi omni antennas
- 4x LED, 1x button
- UART (JP1) header on PCB

Flash instruction under U-Boot, using UART:

1. tftp 0x80060000 lede-ar71xx-generic-ap90q-squashfs-sysupgrade
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000"
5. saveenv && reset

Flash instruction under vendor fimrware, using telnet/SSH:

1. Connect PC with 192.168.1.x address to WAN port
2. Power up device, enter failsafe mode with button (no LED indicator!)
3. Change root password and reboot (mount_root, passwd ..., reboot -f)
4. Upload lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin to /tmp using SCP
5. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253
6. Invoke:
- cd /tmp
- fw_setenv bootcmd "bootm 0x9f050000"
- mtd erase firmware
- mtd -r write lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin firmware

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz 2016-10-06 02:19:17 +02:00 committed by John Crispin
parent 16afa08d19
commit 01dda0659e
10 changed files with 163 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

15
target/linux/ar71xx/base-files/etc/board.d/01_leds
View file

@ -57,6 +57,17 @@ ap147-010)
ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
;;
ap90q|\
dr531)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
case "$board" in
ap90q)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
esac
;;
bhr-4grv2)
ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"
ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
@ -152,10 +163,6 @@ cr5000)
ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1"
;;
dr531)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
;;
dragino2)
ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
ucidef_set_led_netdev "lan" "LAN" "$board:red:lan" "eth0"

7
target/linux/ar71xx/base-files/etc/diag.sh
View file

@ -47,6 +47,10 @@ get_status_led() {
tl-wpa8630)
status_led="$board:green:power"
;;
ap90q|\
gl-inet)
status_led="$board:green:lan"
;;
ap96)
status_led="$board:green:led2"
;;
@ -168,9 +172,6 @@ get_status_led() {
f9k1115v2)
status_led="belkin:blue:status"
;;
gl-inet)
status_led="$board:green:lan"
;;
epg5000|\
esr1750)
status_led="$board:amber:power"

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View file

@ -470,6 +470,9 @@ ar71xx_board_detect() {
*AP83)
name="ap83"
;;
*AP90Q)
name="ap90q"
;;
*"Archer C5")
name="archer-c5"
;;

1
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View file

@ -178,6 +178,7 @@ platform_check_image() {
ap132|\
ap81|\
ap83|\
ap90q|\
bullet-m|\
c-55|\
carambola2|\

1
target/linux/ar71xx/config-4.4
View file

@ -49,6 +49,7 @@ CONFIG_ATH79_MACH_AP147=y
CONFIG_ATH79_MACH_AP152=y
CONFIG_ATH79_MACH_AP81=y
CONFIG_ATH79_MACH_AP83=y
CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y

9
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View file

@ -174,6 +174,15 @@ config ATH79_MACH_AP83
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_AP90Q
bool "YunCore AP90Q support"
select SOC_QCA953X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
config ATH79_MACH_AP96
bool "Atheros AP96 board support"
select SOC_AR71XX

1
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View file

@ -55,6 +55,7 @@ obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o
obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o

123
target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c Normal file
View file

@ -0,0 +1,123 @@
/*
* YunCore AP90Q board support
*
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define AP90Q_GPIO_LED_WAN 4
#define AP90Q_GPIO_LED_WLAN 12
#define AP90Q_GPIO_LED_LAN 16
#define AP90Q_GPIO_BTN_RESET 17
#define AP90Q_KEYS_POLL_INTERVAL 20
#define AP90Q_KEYS_DEBOUNCE_INTERVAL (3 * AP90Q_KEYS_POLL_INTERVAL)
static struct gpio_led ap90q_leds_gpio[] __initdata = {
{
.name = "ap90q:green:lan",
.gpio = AP90Q_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "ap90q:green:wan",
.gpio = AP90Q_GPIO_LED_WAN,
.active_low = 1,
},
{
.name = "ap90q:green:wlan",
.gpio = AP90Q_GPIO_LED_WLAN,
.active_low = 1,
},
};
static struct gpio_keys_button ap90q_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = AP90Q_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP90Q_GPIO_BTN_RESET,
.active_low = 1,
},
};
static void __init ap90q_gpio_setup(void)
{
/* For LED on GPIO4 */
ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true);
ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true);
ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true);
/* Mute LEDs on boot */
gpio_set_value(AP90Q_GPIO_LED_LAN, 1);
gpio_set_value(AP90Q_GPIO_LED_WAN, 1);
ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0);
ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0);
ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio),
ap90q_leds_gpio);
ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ap90q_gpio_keys),
ap90q_gpio_keys);
}
static void __init ap90q_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(NULL);
ap90q_gpio_setup();
ath79_setup_ar933x_phy4_switch(false, false);
ath79_register_mdio(0, 0x0);
ath79_switch_data.phy4_mii_en = 1;
ath79_switch_data.phy_poll_mask |= BIT(4);
/* LAN */
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
ath79_register_eth(1);
/* WAN */
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.phy_mask = BIT(4);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_register_eth(0);
ath79_register_wmac(art, NULL);
}
MIPS_MACHINE(ATH79_MACH_AP90Q, "AP90Q", "YunCore AP90Q", ap90q_setup);

1
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View file

@ -38,6 +38,7 @@ enum ath79_mach_type {
ATH79_MACH_AP152, /* Atheros AP152 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_AP83, /* Atheros AP83 */
ATH79_MACH_AP90Q, /* YunCore AP90Q */
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */

9
target/linux/ar71xx/image/generic.mk
View file

@ -1,3 +1,12 @@
define Device/ap90q
DEVICE_TITLE := YunCore AP90Q
BOARDNAME = AP90Q
IMAGE_SIZE = 16000k
CONSOLE = ttyS0,115200
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += ap90q
define Device/bsb
DEVICE_TITLE := Smart Electronics Black Swift board
DEVICE_PACKAGES := kmod-usb-core kmod-usb2