KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/imx6/image/Makefile

121 lines
3.8 KiB
Makefile
Raw Normal View History

imx6: add new target SVN-Revision: 36753
2013-05-29 01:27:29 +00:00
#
# Copyright (C) 2013 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
#################################################
# Images
#################################################
# build a ubi for a specific flash geometry/layout which can contain
# volumes with the following data from ubinize-$(DEVICE_NAME).cfg:
# - 'boot.ubifs' volume: kernel+dtbs+bootscript
# - 'root.squashfs' volume: rootfs
# $(1): name (used for suffix)
# $(2): PAGESIZE (-m param to mkfs.ubifs/ubinize)
# $(3): ERASESIZE (logical eraseblock size: -e param to mkfs.ubifs)
# $(4): BLOCKSIZE (-p param to ubinize)
# $(5): MAXSIZE (maximum file-system size in LEB's -c param to mkfs.ubifs)
#
define Build/ubi-boot-overlay
# ubi-boot-overlay $(DEVICE_NAME) $(word 1, $(1))
# boot filesystem
rm -rf $(TARGET_ROOTFS_DIR)/boot-$(DEVICE_NAME)_$(word 1, $(1))
mkdir -p $(TARGET_ROOTFS_DIR)/boot-$(DEVICE_NAME)_$(word 1, $(1))
$(CP) $< $(TARGET_ROOTFS_DIR)/boot-$(DEVICE_NAME)_$(word 1, $(1))/$(IMG_PREFIX)-uImage
ln -sf $(IMG_PREFIX)-uImage \
$(TARGET_ROOTFS_DIR)/boot-$(DEVICE_NAME)_$(word 1, $(1))/uImage
$(foreach dts,$(shell echo $(DEVICE_DTS)), \
$(CP) $(LINUX_DIR)/arch/$(ARCH)/boot/dts/$(dts).dtb \
$(BIN_DIR)/$(IMG_PREFIX)-$(dts).dtb; \
$(CP) $(LINUX_DIR)/arch/$(ARCH)/boot/dts/$(dts).dtb \
$(TARGET_ROOTFS_DIR)/boot-$(DEVICE_NAME)_$(word 1, $(1))/$(IMG_PREFIX)-$(dts).dtb; \
ln -sf $(IMG_PREFIX)-$(dts).dtb \
$(TARGET_ROOTFS_DIR)/boot-$(DEVICE_NAME)_$(word 1, $(1))/$(dts).dtb; \
imx6: merge all gateworks boards into one profile Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38858
2013-11-18 22:23:42 +00:00
)
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
-n '$(DEVICE_ID) OpenWrt bootscript' \
-d ./bootscript-$(DEVICE_NAME) \
$(TARGET_ROOTFS_DIR)/boot-$(DEVICE_NAME)_$(word 1, $(1))/6x_bootscript-$(DEVICE_NAME)
$(STAGING_DIR_HOST)/bin/mkfs.ubifs \
--space-fixup --force-compr=zlib --squash-uids \
-m $(word 2, $(1)) -e $(word 3, $(1)) -c $(word 5, $(1)) \
-o $(KDIR)/boot-$(DEVICE_NAME)-bootfs_$(word 1, $(1)).ubifs \
-d $(TARGET_ROOTFS_DIR)/boot-$(DEVICE_NAME)_$(word 1, $(1))
$(CP) $(KDIR)/boot-$(DEVICE_NAME)-bootfs_$(word 1, $(1)).ubifs \
$(BIN_DIR)/$(IMG_PREFIX)-$(DEVICE_NAME)-bootfs_$(word 1, $(1)).ubifs
# ubi
rm -rf p $(KDIR)/$(DEVICE_NAME)_$(word 1, $(1))
mkdir -p $(KDIR)/$(DEVICE_NAME)_$(word 1, $(1))
$(CP) $(word 2, $^) \
$(KDIR)/$(DEVICE_NAME)_$(word 1, $(1))/
$(CP) $(KDIR)/boot-$(DEVICE_NAME)-bootfs_$(word 1, $(1)).ubifs \
$(KDIR)/$(DEVICE_NAME)_$(word 1, $(1))/boot.ubifs
$(CP) ./ubinize-$(DEVICE_NAME).cfg \
$(KDIR)/$(DEVICE_NAME)_$(word 1, $(1))/ubinize.cfg
( cd $(KDIR)/$(DEVICE_NAME)_$(word 1, $(1)); \
$(STAGING_DIR_HOST)/bin/ubinize \
-m $(word 2, $(1)) -p $(word 4, $(1)) -s $(word 2, $(1)) \
-o $@ \
ubinize.cfg \
imx6: merge all gateworks boards into one profile Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38858
2013-11-18 22:23:42 +00:00
)
imx6: add new target SVN-Revision: 36753
2013-05-29 01:27:29 +00:00
endef
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
#################################################
# Devices
#################################################
KERNEL_LOADADDR=0x10008000
define Device/Default
DEVICE_DTS :=
FILESYSTEMS := squashfs ext4
KERNEL_INSTALL := 1
KERNEL_SUFFIX := -uImage
KERNEL_NAME := zImage
KERNEL := kernel-bin | uImage none
IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
IMAGES :=
imx6: reorganize build system Changes include: * switching to profiles * adding ubifs support * building image for GW54XX board Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38441
2013-10-18 00:02:45 +00:00
endef
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
DEVICE_VARS += DEVICE_DTS
define Device/ventana
PROFILES = Generic VENTANA
DEVICE_DTS:= \
imx6dl-gw51xx \
imx6dl-gw52xx \
imx6dl-gw53xx \
imx6dl-gw54xx \
imx6dl-gw551x \
imx6dl-gw552x \
imx6q-gw51xx \
imx6q-gw52xx \
imx6q-gw53xx \
imx6q-gw54xx \
imx6q-gw5400-a \
imx6q-gw551x \
imx6q-gw552x
imx6: images: ventana: change name of ubi output Change the name of the .ubi produced to strip out the word 'factory'. This is mainly due to the fact that there is no difference between the Ventana 'factory' image vs the standard image. Name changes from: openwrt-imx6-ventana-squashfs.nand-factory_<size>.ubi to openwrt-imx6-ventana-squashfs-nand_<size>.ubi Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48016
2015-12-29 23:40:41 +00:00
IMAGES := nand_normal.ubi nand_large.ubi
IMAGE/nand_normal.ubi := ubi-boot-overlay normal 2048 124KiB 128KiB 8124
IMAGE/nand_large.ubi := ubi-boot-overlay large 4096 248KiB 256KiB 8124
IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1)-$$(2)
imx6: add support for more then one nand type per profile Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38857
2013-11-18 22:23:40 +00:00
endef
imx6: reorganize build system Changes include: * switching to profiles * adding ubifs support * building image for GW54XX board Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38441
2013-10-18 00:02:45 +00:00
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
define Device/wandboard
PROFILES = Generic IMX6DL_WANDBOARD
DEVICE_DTS := imx6dl-wandboard
imx6: reorganize build system Changes include: * switching to profiles * adding ubifs support * building image for GW54XX board Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38441
2013-10-18 00:02:45 +00:00
endef
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
TARGET_DEVICES += \
ventana \
wandboard
imx6: add new target SVN-Revision: 36753
2013-05-29 01:27:29 +00:00
$(eval $(call BuildImage))
Reference in a new issue Copy permalink