openwrtv3/openwrt/package/linux/kernel-source/include/sbpcmcia.h

140 lines
3.9 KiB
C
Raw Normal View History

/*
* BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
*
* $Id$
* Copyright 2004, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*/
#ifndef _SBPCMCIA_H
#define _SBPCMCIA_H
/* All the addresses that are offsets in attribute space are divided
* by two to account for the fact that odd bytes are invalid in
* attribute space and our read/write routines make the space appear
* as if they didn't exist. Still we want to show the original numbers
* as documented in the hnd_pcmcia core manual.
*/
/* PCMCIA Function Configuration Registers */
#define PCMCIA_FCR (0x700 / 2)
#define FCR0_OFF 0
#define FCR1_OFF (0x40 / 2)
#define FCR2_OFF (0x80 / 2)
#define FCR3_OFF (0xc0 / 2)
#define PCMCIA_FCR0 (0x700 / 2)
#define PCMCIA_FCR1 (0x740 / 2)
#define PCMCIA_FCR2 (0x780 / 2)
#define PCMCIA_FCR3 (0x7c0 / 2)
/* Standard PCMCIA FCR registers */
#define PCMCIA_COR 0
#define COR_RST 0x80
#define COR_LEV 0x40
#define COR_IRQEN 0x04
#define COR_BLREN 0x01
#define COR_FUNEN 0x01
#define PCICIA_FCSR (2 / 2)
#define PCICIA_PRR (4 / 2)
#define PCICIA_SCR (6 / 2)
#define PCICIA_ESR (8 / 2)
#define PCM_MEMOFF 0x0000
#define F0_MEMOFF 0x1000
#define F1_MEMOFF 0x2000
#define F2_MEMOFF 0x3000
#define F3_MEMOFF 0x4000
/* Memory base in the function fcr's */
#define MEM_ADDR0 (0x728 / 2)
#define MEM_ADDR1 (0x72a / 2)
#define MEM_ADDR2 (0x72c / 2)
/* PCMCIA base plus Srom access in fcr0: */
#define PCMCIA_ADDR0 (0x072e / 2)
#define PCMCIA_ADDR1 (0x0730 / 2)
#define PCMCIA_ADDR2 (0x0732 / 2)
#define MEM_SEG (0x0734 / 2)
#define SROM_CS (0x0736 / 2)
#define SROM_DATAL (0x0738 / 2)
#define SROM_DATAH (0x073a / 2)
#define SROM_ADDRL (0x073c / 2)
#define SROM_ADDRH (0x073e / 2)
/* Values for srom_cs: */
#define SROM_IDLE 0
#define SROM_WRITE 1
#define SROM_READ 2
#define SROM_WEN 4
#define SROM_WDS 7
#define SROM_DONE 8
/* CIS stuff */
/* The CIS stops where the FCRs start */
#define CIS_SIZE PCMCIA_FCR
/* Standard tuples we know about */
#define CISTPL_MANFID 0x20 /* Manufacturer and device id */
#define CISTPL_FUNCE 0x22 /* Function extensions */
#define CISTPL_CFTABLE 0x1b /* Config table entry */
/* Function extensions for LANs */
#define LAN_TECH 1 /* Technology type */
#define LAN_SPEED 2 /* Raw bit rate */
#define LAN_MEDIA 3 /* Transmission media */
#define LAN_NID 4 /* Node identification (aka MAC addr) */
#define LAN_CONN 5 /* Connector standard */
/* CFTable */
#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */
#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */
#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */
/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll
* take one for HNBU, and use "extensions" (a la FUNCE) within it.
*/
#define CISTPL_BRCM_HNBU 0x80
/* Subtypes of BRCM_HNBU: */
#define HNBU_CHIPID 0x01 /* Six bytes with PCI vendor &
* device id and chiprev
*/
#define HNBU_BOARDREV 0x02 /* Two bytes board revision */
#define HNBU_PAPARMS 0x03 /* Eleven bytes PA parameters */
#define HNBU_OEM 0x04 /* Eight bytes OEM data */
#define HNBU_CC 0x05 /* Default country code */
#define HNBU_AA 0x06 /* Antennas available */
#define HNBU_AG 0x07 /* Antenna gain */
#define HNBU_BOARDFLAGS 0x08 /* board flags */
#define HNBU_LED 0x09 /* LED set */
/* sbtmstatelow */
#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */
#define SBTML_INT_EN 0x20000 /* enable sb interrupt */
/* sbtmstatehigh */
#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */
#endif /* _SBPCMCIA_H */