openwrtv3/target/linux/x86/image/Makefile

257 lines
8.1 KiB
Makefile
Raw Normal View History

#
# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
export PATH=$(TARGET_PATH):/sbin
GRUB2_MODULES = at_keyboard biosdisk boot chain configfile ext2 linux ls part_msdos reboot serial vga
GRUB_TERMINALS =
GRUB_SERIAL_CONFIG =
GRUB_TERMINAL_CONFIG =
GRUB_CONSOLE_CMDLINE =
ifneq ($(CONFIG_X86_GRUB_CONSOLE),)
GRUB_CONSOLE_CMDLINE += console=tty0
GRUB_TERMINALS += console
endif
ifneq ($(CONFIG_X86_GRUB_SERIAL),)
GRUB_CONSOLE_CMDLINE += console=$(call qstrip,$(CONFIG_X86_GRUB_SERIAL)),$(CONFIG_X86_GRUB_BAUDRATE)n8
GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_X86_GRUB_BAUDRATE) --word=8 --parity=no --stop=1
GRUB_TERMINALS += serial
endif
ifneq ($(GRUB_TERMINALS),)
ifneq ($(CONFIG_X86_USE_GRUB2),)
GRUB_TERMINAL_CONFIG := terminal_input $(GRUB_TERMINALS); terminal_output $(GRUB_TERMINALS)
else
GRUB_TERMINAL_CONFIG := terminal --timeout=2 $(GRUB_TERMINALS)
endif
endif
ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_X86_GRUB_TIMEOUT))
ifneq ($(CONFIG_X86_GRUB_IMAGES),)
BOOTOPTS:=$(call qstrip,$(CONFIG_X86_GRUB_BOOTOPTS))
define Image/cmdline/ext4
root=$(ROOTPART) rootfstype=ext4 rootwait
endef
define Image/cmdline/jffs2-64k
block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootwait
endef
define Image/cmdline/jffs2-128k
block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootwait
endef
define Image/cmdline/squashfs
block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootwait
endef
define Image/Build/grub
# left here because the image builder doesnt need these
$(INSTALL_DIR) $(KDIR)/root.grub/boot/grub
$(CP) \
$(KDIR)/stage1 \
$(KDIR)/stage2 \
$(KDIR)/e2fs_stage1_5 \
$(KDIR)/root.grub/boot/grub/
$(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
sed \
-e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
-e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
-e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
-e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst
PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_grub.sh \
$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
$(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.grub \
$(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
$(call Image/Build/grub/$(1))
endef
define Image/Prepare/grub
# for the image builder
$(CP) \
$(STAGING_DIR)/usr/lib/grub/i386-openwrt/stage1 \
$(STAGING_DIR)/usr/lib/grub/i386-openwrt/stage2 \
$(STAGING_DIR)/usr/lib/grub/i386-openwrt/stage2_eltorito \
$(STAGING_DIR)/usr/lib/grub/i386-openwrt/e2fs_stage1_5 \
$(KDIR)/
endef
define Image/Build/grub2
# left here because the image builder doesnt need these
$(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2
$(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
grub-mkimage \
-o $(KDIR)/grub2/core.img \
-O i386-pc \
-c ./grub-early.cfg \
$(GRUB2_MODULES)
$(CP) $(STAGING_DIR_HOST)/lib/grub/i386-pc/*.img $(KDIR)/grub2/
echo '(hd0) $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img' > $(KDIR)/grub2/device.map
sed \
-e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
-e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
-e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
-e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
./grub.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg
PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_generic.sh \
$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
$(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.grub \
$(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1) \
256
grub-bios-setup \
--device-map="$(KDIR)/grub2/device.map" \
-d "$(KDIR)/grub2" \
-r "hd0,msdos1" \
"$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img"
$(call Image/Build/grub/$(1))
endef
endif
ROOTDELAY=10
ifneq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),)
define Image/cmdline/ext4
root=$(ROOTPART) rootfstype=ext4 rootwait
endef
define Image/cmdline/jffs2-64k
block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootdelay=$(ROOTDELAY)
endef
define Image/cmdline/jffs2-128k
block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootdelay=$(ROOTDELAY)
endef
define Image/cmdline/squashfs
block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootdelay=$(ROOTDELAY)
endef
define Image/Build/bootscript
# left here because the image builder doesnt need these
$(INSTALL_DIR) $(KDIR)/root.bootscript/boot
$(CP) $(KDIR)/bzImage $(KDIR)/root.bootscript/boot/vmlinuz
sed -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
./olpc.fth > $(KDIR)/root.bootscript/boot/olpc.fth
PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_olpc.sh \
$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
$(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.bootscript \
$(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
endef
endif
define Image/Build/squashfs
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
endef
define Image/Build/iso
$(INSTALL_DIR) $(KDIR)/root.grub/boot/grub
$(CP) \
$(KDIR)/stage2_eltorito \
$(KDIR)/root.grub/boot/grub/
sed \
-e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
-e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
-e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
-e 's#(hd0,0)#(cd)#g' \
./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst
$(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
mkisofs -R -b boot/grub/stage2_eltorito -no-emul-boot -boot-load-size 4 -boot-info-table \
-o $(KDIR)/root.iso $(KDIR)/root.grub
endef
ifneq ($(CONFIG_X86_VDI_IMAGES),)
define Image/Build/vdi
# left here because the image builder doesnt need these
ifeq ($(1),ext4)
rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi || true
qemu-img convert -f raw -O vdi \
$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
# XXX: VBoxManage insists on setting perms to 0600
chmod 0644 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
endif
endef
endif
ifneq ($(CONFIG_X86_VMDK_IMAGES),)
define Image/Build/vmdk
# left here because the image builder doesnt need these
ifeq ($(1),ext4)
rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk || true
qemu-img convert -f raw -O vmdk \
$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk
endif
endef
endif
define Image/Build/gzip
gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img
gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
endef
ifneq ($(CONFIG_TARGET_IMAGES_GZIP),)
define Image/Build/gzip/ext4
$(call Image/Build/gzip,ext4)
endef
ifneq ($(CONFIG_TARGET_IMAGES_PAD),)
define Image/Build/gzip/squashfs
$(call Image/Build/gzip,squashfs)
endef
define Image/Build/gzip/jffs2-64k
$(call Image/Build/gzip,jffs2-64k)
endef
define Image/Build/gzip/jffs2-128k
$(call Image/Build/gzip,jffs2-128k)
endef
endif
endif
define Image/BuildKernel
$(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
ifneq ($(CONFIG_X86_ETHERBOOT_IMAGES),)
rm -f $(BIN_DIR)/$(IMG_PREFIX)-etherboot
$(STAGING_DIR_HOST)/bin/mkelfImage \
--append=$(CONFIG_X86_ETHERBOOT_BOOTOPTS) \
$(KDIR)/bzImage \
$(BIN_DIR)/$(IMG_PREFIX)-etherboot
endif
endef
define Image/Prepare
$(CP) $(LINUX_DIR)/arch/x86/boot/bzImage $(KDIR)/bzImage
$(call Image/Prepare/bootscript)
$(call Image/Prepare/grub)
endef
define Image/Build
$(call Image/Build/$(1))
$(call Image/Build/bootscript,$(1))
ifneq ($(1),iso)
$(call Image/Build/$(if $(CONFIG_X86_USE_GRUB2),grub2,grub),$(1))
$(call Image/Build/vdi,$(1))
$(call Image/Build/vmdk,$(1))
endif
$(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
$(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
$(call Image/Build/gzip/$(1))
endef
$(eval $(call BuildImage))