openwrtv3/target/linux/layerscape/patches-4.4/1103-mtd-spi-nor-Support-R-W-for-S25FS-S-family-flash.patch

From 0878404f549021e7fe0a49ae0454cf53fd452add Mon Sep 17 00:00:00 2001
From: Yunhui Cui <yunhui.cui@nxp.com>
Date: Tue, 2 Feb 2016 12:00:27 +0800
Subject: [PATCH 103/113] mtd: spi-nor: Support R/W for S25FS-S family flash

With the physical sectors combination, S25FS-S family flash
requires some special operations for read/write functions.

Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com>
---
 drivers/mtd/spi-nor/spi-nor.c |   60 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -40,6 +40,10 @@
 #define SPI_NOR_MAX_ID_LEN	6
 #define SPI_NOR_MAX_ADDR_WIDTH	4
 #define SPI_NOR_MICRON_WRITE_ENABLE	0x7f
+/* Added for S25FS-S family flash */
+#define SPINOR_CONFIG_REG3_OFFSET      0x800004
+#define CR3V_4KB_ERASE_UNABLE  0x8
+#define SPINOR_S25FS_FAMILY_ID 0x81
 
 struct flash_info {
 	char		*name;
@@ -74,6 +78,8 @@ struct flash_info {
 };
 
 #define JEDEC_MFR(info)	((info)->id[0])
+#define EXT_ID(info)	((info)->id[5])
+
 
 static const struct flash_info *spi_nor_match_id(const char *name);
 
@@ -786,6 +792,7 @@ static const struct flash_info spi_nor_i
 	 */
 	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512, 0)},
 	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
 	{ "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "s25fl512s",  INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
@@ -910,6 +917,53 @@ static const struct flash_info *spi_nor_
 	return ERR_PTR(-ENODEV);
 }
 
+/*
+ * The S25FS-S family physical sectors may be configured as a
+ * hybrid combination of eight 4-kB parameter sectors
+ * at the top or bottom of the address space with all
+ * but one of the remaining sectors being uniform size.
+ * The Parameter Sector Erase commands (20h or 21h) must
+ * be used to erase the 4-kB parameter sectors individually.
+ * The Sector (uniform sector) Erase commands (D8h or DCh)
+ * must be used to erase any of the remaining
+ * sectors, including the portion of highest or lowest address
+ * sector that is not overlaid by the parameter sectors.
+ * The uniform sector erase command has no effect on parameter sectors.
+ */
+static int spansion_s25fs_disable_4kb_erase(struct spi_nor *nor)
+{
+	struct fsl_qspi *q;
+	u32 cr3v_addr  = SPINOR_CONFIG_REG3_OFFSET;
+	u8 cr3v = 0x0;
+	int ret = 0x0;
+
+	q = nor->priv;
+
+	nor->cmd_buf[2] = cr3v_addr >> 16;
+	nor->cmd_buf[1] = cr3v_addr >> 8;
+	nor->cmd_buf[0] = cr3v_addr >> 0;
+
+	ret = nor->read_reg(nor, SPINOR_OP_SPANSION_RDAR, &cr3v, 1);
+	if (ret)
+		return ret;
+	if (cr3v & CR3V_4KB_ERASE_UNABLE)
+		return 0;
+	ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0);
+	if (ret)
+		return ret;
+	cr3v = CR3V_4KB_ERASE_UNABLE;
+	nor->program_opcode = SPINOR_OP_SPANSION_WRAR;
+	nor->write(nor, cr3v_addr, 1, &cr3v);
+
+	ret = nor->read_reg(nor, SPINOR_OP_SPANSION_RDAR, &cr3v, 1);
+	if (ret)
+		return ret;
+	if (!(cr3v & CR3V_4KB_ERASE_UNABLE))
+		return -EPERM;
+
+	return 0;
+}
+
 static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
 			size_t *retlen, u_char *buf)
 {
@@ -1248,6 +1302,12 @@ int spi_nor_scan(struct spi_nor *nor, co
 		write_sr(nor, ret);
 	}
 
+	if (EXT_ID(info) == SPINOR_S25FS_FAMILY_ID) {
+		ret = spansion_s25fs_disable_4kb_erase(nor);
+		if (ret)
+			return ret;
+	}
+
 	if (!mtd->name)
 		mtd->name = dev_name(dev);
 	mtd->priv = nor;