openwrtv3/target/linux/ramips/patches-3.10/0512-USB-add-xhci-support-for-mt7621.patch

863 lines
25 KiB
Diff
Raw Normal View History

Index: linux-3.10.26/drivers/usb/core/hub.c
===================================================================
--- linux-3.10.26.orig/drivers/usb/core/hub.c 2014-01-09 20:25:15.000000000 +0000
+++ linux-3.10.26/drivers/usb/core/hub.c 2014-01-19 16:29:18.548615960 +0000
@@ -1259,7 +1259,7 @@
if (type != HUB_SUSPEND) {
/* Disconnect all the children */
for (i = 0; i < hdev->maxchild; ++i) {
- if (hub->ports[i]->child)
+ if (hub->ports[i] && hub->ports[i]->child)
usb_disconnect(&hub->ports[i]->child);
}
}
Index: linux-3.10.26/drivers/usb/core/port.c
===================================================================
--- linux-3.10.26.orig/drivers/usb/core/port.c 2014-01-09 20:25:15.000000000 +0000
+++ linux-3.10.26/drivers/usb/core/port.c 2014-01-19 16:29:18.548615960 +0000
@@ -193,6 +193,7 @@
void usb_hub_remove_port_device(struct usb_hub *hub,
int port1)
{
- device_unregister(&hub->ports[port1 - 1]->dev);
+ if (hub->ports[port1 - 1])
+ device_unregister(&hub->ports[port1 - 1]->dev);
}
Index: linux-3.10.26/drivers/usb/host/Kconfig
===================================================================
--- linux-3.10.26.orig/drivers/usb/host/Kconfig 2014-01-09 20:25:15.000000000 +0000
+++ linux-3.10.26/drivers/usb/host/Kconfig 2014-01-19 16:29:18.548615960 +0000
@@ -28,7 +28,11 @@
if USB_XHCI_HCD
config USB_XHCI_PLATFORM
- tristate
+ bool "xHCI platform"
+
+config USB_MT7621_XHCI_PLATFORM
+ bool "MTK MT7621 xHCI"
+ depends on USB_XHCI_PLATFORM
config USB_XHCI_HCD_DEBUGGING
bool "Debugging for the xHCI host controller"
Index: linux-3.10.26/drivers/usb/host/Makefile
===================================================================
--- linux-3.10.26.orig/drivers/usb/host/Makefile 2014-01-09 20:25:15.000000000 +0000
+++ linux-3.10.26/drivers/usb/host/Makefile 2014-01-19 16:30:54.964617843 +0000
@@ -13,15 +13,23 @@
xhci-hcd-y := xhci.o xhci-mem.o
xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
xhci-hcd-$(CONFIG_PCI) += xhci-pci.o
+endif
+
+ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
+xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o
+endif
ifneq ($(CONFIG_USB_XHCI_PLATFORM), )
- xhci-hcd-y += xhci-plat.o
+xhci-hcd-y += xhci-plat.o
endif
obj-$(CONFIG_USB_WHCI_HCD) += whci/
+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
obj-$(CONFIG_PCI) += pci-quirks.o
+endif
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
Index: linux-3.10.26/drivers/usb/host/pci-quirks.h
===================================================================
--- linux-3.10.26.orig/drivers/usb/host/pci-quirks.h 2014-01-19 16:29:17.392615927 +0000
+++ linux-3.10.26/drivers/usb/host/pci-quirks.h 2014-01-19 16:29:18.548615960 +0000
@@ -1,7 +1,7 @@
#ifndef __LINUX_USB_PCI_QUIRKS_H
#define __LINUX_USB_PCI_QUIRKS_H
-#ifdef CONFIG_PCI
+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
Index: linux-3.10.26/drivers/usb/host/xhci.c
===================================================================
--- linux-3.10.26.orig/drivers/usb/host/xhci.c 2014-01-09 20:25:15.000000000 +0000
+++ linux-3.10.26/drivers/usb/host/xhci.c 2014-01-19 16:29:18.548615960 +0000
@@ -30,6 +30,16 @@
#include "xhci.h"
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+#include <asm/uaccess.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include "mtk-phy.h"
+#include "xhci-mtk-scheduler.h"
+#include "xhci-mtk-power.h"
+#include "xhci-mtk.h"
+#endif
+
#define DRIVER_AUTHOR "Sarah Sharp"
#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
@@ -38,6 +48,18 @@
module_param(link_quirk, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+static struct file_operations xhci_mtk_test_fops = {
+ .owner = THIS_MODULE,
+ .read = xhci_mtk_test_read,
+ .write = xhci_mtk_test_write,
+ .unlocked_ioctl = xhci_mtk_test_unlock_ioctl,
+ .open = xhci_mtk_test_open,
+ .release = xhci_mtk_test_release,
+};
+#endif
+
/* TODO: copied from ehci-hcd.c - can this be refactored? */
/*
* xhci_handshake - spin reading hc until handshake completes or fails
@@ -189,7 +211,7 @@
return ret;
}
-#ifdef CONFIG_PCI
+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
static int xhci_free_msi(struct xhci_hcd *xhci)
{
int i;
@@ -386,6 +408,7 @@
return ret;
}
hcd->irq = pdev->irq;
+
return 0;
}
@@ -427,6 +450,11 @@
xhci_dbg(xhci, "Attempting compliance mode recovery\n");
hcd = xhci->shared_hcd;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ temp |= (1 << 31);
+ xhci_writel(xhci, temp, xhci->usb3_ports[i]);
+#endif
+
if (hcd->state == HC_STATE_SUSPENDED)
usb_hcd_resume_root_hub(hcd);
@@ -475,6 +503,9 @@
{
const char *dmi_product_name, *dmi_sys_vendor;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ return true;
+#endif
dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
if (!dmi_product_name || !dmi_sys_vendor)
@@ -518,6 +549,10 @@
} else {
xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n");
}
+
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ mtk_xhci_scheduler_init();
+#endif
retval = xhci_mem_init(xhci, GFP_KERNEL);
xhci_dbg(xhci, "Finished xhci_init\n");
@@ -661,7 +696,11 @@
xhci_dbg(xhci, "// Set the interrupt modulation register\n");
temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
temp &= ~ER_IRQ_INTERVAL_MASK;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ temp |= (u32) 16;
+#else
temp |= (u32) 160;
+#endif
xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
/* Set the HCD state before we enable the irqs */
@@ -682,6 +721,9 @@
xhci_queue_vendor_command(xhci, 0, 0, 0,
TRB_TYPE(TRB_NEC_GET_FW));
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ enableXhciAllPortPower(xhci);
+#endif
xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n");
return 0;
}
@@ -999,7 +1041,6 @@
/* If restore operation fails, re-initialize the HC during resume */
if ((temp & STS_SRE) || hibernated) {
-
if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
!(xhci_all_ports_seen_u0(xhci))) {
del_timer_sync(&xhci->comp_mode_recovery_timer);
@@ -1583,6 +1624,13 @@
u32 drop_flag;
u32 new_add_flags, new_drop_flags, new_slot_info;
int ret;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+#if MTK_SCH_NEW
+ struct sch_ep *sch_ep = NULL;
+ int isTT;
+ int ep_type;
+#endif
+#endif
ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
if (ret <= 0)
@@ -1634,6 +1682,40 @@
xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+#if MTK_SCH_NEW
+ slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx);
+ if ((slot_ctx->tt_info & 0xff) > 0) {
+ isTT = 1;
+ }
+ else {
+ isTT = 0;
+ }
+ if (usb_endpoint_xfer_int(&ep->desc)) {
+ ep_type = USB_EP_INT;
+ }
+ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
+ ep_type = USB_EP_ISOC;
+ }
+ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
+ ep_type = USB_EP_BULK;
+ }
+ else
+ ep_type = USB_EP_CONTROL;
+
+ sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc)
+ , isTT, ep_type, (mtk_u32 *)ep);
+ if (sch_ep != NULL) {
+ kfree(sch_ep);
+ }
+ else {
+ xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n");
+ }
+#else
+ mtk_xhci_scheduler_remove_ep(xhci, udev, ep);
+#endif
+#endif
+
xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
(unsigned int) ep->desc.bEndpointAddress,
udev->slot_id,
@@ -1669,6 +1751,18 @@
u32 new_add_flags, new_drop_flags, new_slot_info;
struct xhci_virt_device *virt_dev;
int ret = 0;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ struct xhci_ep_ctx *in_ep_ctx;
+#if MTK_SCH_NEW
+ struct sch_ep *sch_ep;
+ int isTT;
+ int ep_type;
+ int maxp = 0;
+ int burst = 0;
+ int mult = 0;
+ int interval;
+#endif
+#endif
ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
if (ret <= 0) {
@@ -1731,6 +1825,56 @@
return -ENOMEM;
}
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+#if MTK_SCH_NEW
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ if ((slot_ctx->tt_info & 0xff) > 0) {
+ isTT = 1;
+ }
+ else {
+ isTT = 0;
+ }
+ if (usb_endpoint_xfer_int(&ep->desc)) {
+ ep_type = USB_EP_INT;
+ }
+ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
+ ep_type = USB_EP_ISOC;
+ }
+ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
+ ep_type = USB_EP_BULK;
+ }
+ else
+ ep_type = USB_EP_CONTROL;
+
+ if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH
+ || udev->speed == USB_SPEED_LOW) {
+ maxp = ep->desc.wMaxPacketSize & 0x7FF;
+ burst = ep->desc.wMaxPacketSize >> 11;
+ mult = 0;
+ }
+ else if (udev->speed == USB_SPEED_SUPER) {
+ maxp = ep->desc.wMaxPacketSize & 0x7FF;
+ burst = ep->ss_ep_comp.bMaxBurst;
+ mult = ep->ss_ep_comp.bmAttributes & 0x3;
+ }
+ interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff));
+ sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL);
+ if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc),
+ isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep
+ , (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) {
+ xhci_err(xhci, "[MTK] not enough bandwidth\n");
+
+ return -ENOSPC;
+ }
+#else
+ if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) {
+ xhci_err(xhci, "[MTK] not enough bandwidth\n");
+
+ return -ENOSPC;
+ }
+#endif
+#endif
ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
@@ -2694,7 +2838,7 @@
if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
ctrl_ctx->drop_flags == 0)
return 0;
-
+
xhci_dbg(xhci, "New Input Control Context:\n");
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
xhci_dbg_ctx(xhci, virt_dev->in_ctx,
@@ -4230,10 +4374,14 @@
u16 *timeout)
{
if (state == USB3_LPM_U1) {
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
if (xhci->quirks & XHCI_INTEL_HOST)
+#endif
return xhci_calculate_intel_u1_timeout(udev, desc);
} else {
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
if (xhci->quirks & XHCI_INTEL_HOST)
+#endif
return xhci_calculate_intel_u2_timeout(udev, desc);
}
@@ -4659,7 +4807,9 @@
/* Accept arbitrarily long scatter-gather lists */
hcd->self.sg_tablesize = ~0;
/* XHCI controllers don't stop the ep queue on short packets :| */
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
hcd->self.no_stop_on_short = 1;
+#endif
if (usb_hcd_is_primary_hcd(hcd)) {
xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
@@ -4728,6 +4878,10 @@
goto error;
xhci_dbg(xhci, "Reset complete\n");
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ setInitialReg();
+#endif
+
temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
if (HCC_64BIT_ADDR(temp)) {
xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
@@ -4752,8 +4906,21 @@
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+static struct platform_device xhci_platform_dev = {
+ .name = "xhci-hcd",
+ .id = -1,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+#endif
+
static int __init xhci_hcd_init(void)
{
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ struct platform_device *pPlatformDev;
+#endif
int retval;
retval = xhci_register_pci();
@@ -4766,6 +4933,33 @@
printk(KERN_DEBUG "Problem registering platform driver.");
goto unreg_pci;
}
+
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ retval = register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops);
+
+ u3phy_init();
+ if (u3phy_ops->u2_slew_rate_calibration) {
+ u3phy_ops->u2_slew_rate_calibration(u3phy);
+ u3phy_ops->u2_slew_rate_calibration(u3phy_p1);
+ }
+ else{
+ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
+ }
+ u3phy_ops->init(u3phy);
+ reinitIP();
+
+ pPlatformDev = &xhci_platform_dev;
+ memset(pPlatformDev, 0, sizeof(struct platform_device));
+ pPlatformDev->name = "xhci-hcd";
+ pPlatformDev->id = -1;
+ pPlatformDev->dev.coherent_dma_mask = 0xffffffff;
+ pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask;
+
+ retval = platform_device_register(&xhci_platform_dev);
+ if (retval < 0)
+ xhci_unregister_plat();
+#endif
+
/*
* Check the compiler generated sizes of structures that must be laid
* out in specific ways for hardware access.
@@ -4783,6 +4977,7 @@
BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
+
return 0;
unreg_pci:
xhci_unregister_pci();
Index: linux-3.10.26/drivers/usb/host/xhci-dbg.c
===================================================================
--- linux-3.10.26.orig/drivers/usb/host/xhci-dbg.c 2014-01-09 20:25:15.000000000 +0000
+++ linux-3.10.26/drivers/usb/host/xhci-dbg.c 2014-01-19 16:29:18.548615960 +0000
@@ -21,6 +21,9 @@
*/
#include "xhci.h"
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+#include "xhci-mtk.h"
+#endif
#define XHCI_INIT_VALUE 0x0
Index: linux-3.10.26/drivers/usb/host/xhci.h
===================================================================
--- linux-3.10.26.orig/drivers/usb/host/xhci.h 2014-01-09 20:25:15.000000000 +0000
+++ linux-3.10.26/drivers/usb/host/xhci.h 2014-01-19 16:29:18.548615960 +0000
@@ -29,9 +29,24 @@
#include <linux/usb/hcd.h>
/* Code sharing between pci-quirks and xhci hcd */
-#include "xhci-ext-caps.h"
+#include "xhci-ext-caps.h"
#include "pci-quirks.h"
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+#define XHC_IRQ (22 + 8)
+#define XHC_IO_START 0x1E1C0000
+#define XHC_IO_LENGTH 0x10000
+/* mtk scheduler bitmasks */
+#define BPKTS(p) ((p) & 0x3f)
+#define BCSCOUNT(p) (((p) & 0x7) << 8)
+#define BBM(p) ((p) << 11)
+#define BOFFSET(p) ((p) & 0x3fff)
+#define BREPEAT(p) (((p) & 0x7fff) << 16)
+#endif
+
+
+
+
/* xHCI PCI Configuration Registers */
#define XHCI_SBRN_OFFSET (0x60)
@@ -1536,8 +1551,12 @@
/* Compliance Mode Recovery Data */
struct timer_list comp_mode_recovery_timer;
u32 port_status_u0;
+#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
+#define COMP_MODE_RCVRY_MSECS 5000
+#else
/* Compliance Mode Timer Triggered every 2 seconds */
#define COMP_MODE_RCVRY_MSECS 2000
+#endif
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */
@@ -1703,7 +1722,7 @@
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command);
-#ifdef CONFIG_PCI
+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
/* xHCI PCI glue */
int xhci_register_pci(void);
void xhci_unregister_pci(void);
Index: linux-3.10.26/drivers/usb/host/xhci-mem.c
===================================================================
--- linux-3.10.26.orig/drivers/usb/host/xhci-mem.c 2014-01-09 20:25:15.000000000 +0000
+++ linux-3.10.26/drivers/usb/host/xhci-mem.c 2014-01-19 16:29:18.548615960 +0000
@@ -65,6 +65,9 @@
static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
{
+ if (!seg)
+ return;
+
if (seg->trbs) {
dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
seg->trbs = NULL;
@@ -1446,9 +1449,17 @@
max_burst = (usb_endpoint_maxp(&ep->desc)
& 0x1800) >> 11;
}
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
+ max_packet += 2;
+#endif
break;
case USB_SPEED_FULL:
case USB_SPEED_LOW:
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
+ max_packet += 2;
+#endif
break;
default:
BUG();
Index: linux-3.10.26/drivers/usb/host/xhci-plat.c
===================================================================
--- linux-3.10.26.orig/drivers/usb/host/xhci-plat.c 2014-01-09 20:25:15.000000000 +0000
+++ linux-3.10.26/drivers/usb/host/xhci-plat.c 2014-01-19 16:29:18.548615960 +0000
@@ -25,6 +25,13 @@
* dev struct in order to setup MSI
*/
xhci->quirks |= XHCI_PLAT;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ /* MTK host controller gives a spurious successful event after a
+ * short transfer. Ignore it.
+ */
+ xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+ xhci->quirks |= XHCI_LPM_SUPPORT;
+#endif
}
/* called during probe() after chip reset completes */
@@ -96,20 +103,32 @@
driver = &xhci_plat_xhci_driver;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ irq = XHC_IRQ;
+#else
irq = platform_get_irq(pdev, 0);
+#endif
+
if (irq < 0)
return -ENODEV;
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
+#endif
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd)
return -ENOMEM;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ hcd->rsrc_start = (uint32_t)XHC_IO_START;
+ hcd->rsrc_len = XHC_IO_LENGTH;
+#else
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
+#endif
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
===================================================================
--- linux-3.10.26.orig/drivers/usb/host/xhci-ring.c 2014-01-09 20:25:15.000000000 +0000
+++ linux-3.10.26/drivers/usb/host/xhci-ring.c 2014-01-19 16:29:18.548615960 +0000
@@ -236,7 +236,6 @@
*/
if (!chain && !more_trbs_coming)
break;
-
/* If we're not dealing with 0.95 hardware or
* isoc rings on AMD 0.96 host,
* carry over the chain bit of the previous TRB
@@ -273,16 +272,20 @@
static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
unsigned int num_trbs)
{
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
int num_trbs_in_deq_seg;
+#endif
if (ring->num_trbs_free < num_trbs)
return 0;
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
return 0;
}
+#endif
return 1;
}
@@ -2910,6 +2913,7 @@
next = ring->enqueue;
while (last_trb(xhci, ring, ring->enq_seg, next)) {
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
/* If we're not dealing with 0.95 hardware or isoc rings
* on AMD 0.96 host, clear the chain bit.
*/
@@ -2919,7 +2923,9 @@
next->link.control &= cpu_to_le32(~TRB_CHAIN);
else
next->link.control |= cpu_to_le32(TRB_CHAIN);
-
+#else
+ next->link.control &= cpu_to_le32(~TRB_CHAIN);
+#endif
wmb();
next->link.control ^= cpu_to_le32(TRB_CYCLE);
@@ -3049,6 +3055,9 @@
start_trb->field[3] |= cpu_to_le32(start_cycle);
else
start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ wmb();
+#endif
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
}
@@ -3108,6 +3117,29 @@
return (remainder >> 10) << 17;
}
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length)
+{
+ u32 max = 31;
+ int remainder, td_packet_count, packet_transferred;
+
+ //0 for the last TRB
+ //FIXME: need to workaround if there is ZLP in this TD
+ if (td_running_total + trb_buffer_length == td_transfer_size)
+ return 0;
+
+ //FIXME: need to take care of high-bandwidth (MAX_ESIT)
+ packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp;
+ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp);
+ remainder = td_packet_count - packet_transferred;
+
+ if (remainder > max)
+ return max << 17;
+ else
+ return remainder << 17;
+}
+#endif
+
/*
* For xHCI 1.0 host controllers, TD size is the number of max packet sized
* packets remaining in the TD (*not* including this TRB).
@@ -3245,6 +3277,7 @@
}
/* Set the TRB length, TD size, and interrupter fields. */
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
if (xhci->hci_version < 0x100) {
remainder = xhci_td_remainder(
urb->transfer_buffer_length -
@@ -3254,6 +3287,13 @@
trb_buff_len, total_packet_count, urb,
num_trbs - 1);
}
+#else
+ if (num_trbs > 1)
+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length,
+ running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len);
+#endif
+
+
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
@@ -3316,6 +3356,9 @@
int running_total, trb_buff_len, ret;
unsigned int total_packet_count;
u64 addr;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ int max_packet;
+#endif
if (urb->num_sgs)
return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
@@ -3341,6 +3384,25 @@
running_total += TRB_MAX_BUFF_SIZE;
}
/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ switch(urb->dev->speed){
+ case USB_SPEED_SUPER:
+ max_packet = urb->ep->desc.wMaxPacketSize;
+ break;
+ case USB_SPEED_HIGH:
+ case USB_SPEED_FULL:
+ case USB_SPEED_LOW:
+ case USB_SPEED_WIRELESS:
+ case USB_SPEED_UNKNOWN:
+ default:
+ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
+ break;
+ }
+ if((urb->transfer_flags & URB_ZERO_PACKET)
+ && ((urb->transfer_buffer_length % max_packet) == 0)){
+ num_trbs++;
+ }
+#endif
ret = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
@@ -3400,6 +3462,7 @@
field |= TRB_ISP;
/* Set the TRB length, TD size, and interrupter fields. */
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
if (xhci->hci_version < 0x100) {
remainder = xhci_td_remainder(
urb->transfer_buffer_length -
@@ -3409,6 +3472,10 @@
trb_buff_len, total_packet_count, urb,
num_trbs - 1);
}
+#else
+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
+#endif
+
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
@@ -3498,7 +3565,11 @@
field |= 0x1;
/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (1) {
+#else
if (xhci->hci_version == 0x100) {
+#endif
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_TX_TYPE(TRB_DATA_IN);
@@ -3522,7 +3593,12 @@
field = TRB_TYPE(TRB_DATA);
length_field = TRB_LEN(urb->transfer_buffer_length) |
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
xhci_td_remainder(urb->transfer_buffer_length) |
+#else
+ //CC: MTK style, no scatter-gather for control transfer
+ 0 |
+#endif
TRB_INTR_TARGET(0);
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
@@ -3533,7 +3609,7 @@
length_field,
field | ep_ring->cycle_state);
}
-
+
/* Save the DMA address of the last TRB in the TD */
td->last_trb = ep_ring->enqueue;
@@ -3645,6 +3721,9 @@
u64 start_addr, addr;
int i, j;
bool more_trbs_coming;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ int max_packet;
+#endif
ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
@@ -3658,6 +3737,21 @@
start_trb = &ep_ring->enqueue->generic;
start_cycle = ep_ring->cycle_state;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ switch(urb->dev->speed){
+ case USB_SPEED_SUPER:
+ max_packet = urb->ep->desc.wMaxPacketSize;
+ break;
+ case USB_SPEED_HIGH:
+ case USB_SPEED_FULL:
+ case USB_SPEED_LOW:
+ case USB_SPEED_WIRELESS:
+ case USB_SPEED_UNKNOWN:
+ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
+ break;
+ }
+#endif
+
urb_priv = urb->hcpriv;
/* Queue the first TRB, even if it's zero-length */
for (i = 0; i < num_tds; i++) {
@@ -3729,9 +3823,13 @@
} else {
td->last_trb = ep_ring->enqueue;
field |= TRB_IOC;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (!(xhci->quirks & XHCI_AVOID_BEI)) {
+#else
if (xhci->hci_version == 0x100 &&
!(xhci->quirks &
XHCI_AVOID_BEI)) {
+#endif
/* Set BEI bit except for the last td */
if (i < num_tds - 1)
field |= TRB_BEI;
@@ -3746,6 +3844,7 @@
trb_buff_len = td_remain_len;
/* Set the TRB length, TD size, & interrupter fields. */
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
if (xhci->hci_version < 0x100) {
remainder = xhci_td_remainder(
td_len - running_total);
@@ -3755,6 +3854,10 @@
total_packet_count, urb,
(trbs_per_td - j - 1));
}
+#else
+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
+#endif
+
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);