openwrtv3/target/linux/layerscape/patches-4.9/201-config-support-layerscape.patch

375 lines
12 KiB
Diff
Raw Normal View History

From 0774b97305507af18f8c43efb69aa00e6c57ae90 Mon Sep 17 00:00:00 2001
From: Yangbo Lu <yangbo.lu@nxp.com>
Date: Fri, 6 Jul 2018 15:31:14 +0800
Subject: [PATCH] config: support layerscape
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This is an integrated patch for layerscape config/makefile support.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
arch/arm/mach-imx/Kconfig | 1 +
drivers/base/Kconfig | 1 +
drivers/crypto/Makefile | 2 +-
drivers/net/ethernet/freescale/Kconfig | 4 +-
drivers/net/ethernet/freescale/Makefile | 2 +
drivers/ptp/Kconfig | 29 +++++++++++
drivers/rtc/Kconfig | 8 +++
drivers/rtc/Makefile | 1 +
drivers/soc/Kconfig | 3 +-
drivers/soc/fsl/Kconfig | 30 ++++++++++++
drivers/soc/fsl/Kconfig.arm | 16 ++++++
drivers/soc/fsl/Makefile | 5 ++
drivers/soc/fsl/layerscape/Kconfig | 10 ++++
drivers/soc/fsl/layerscape/Makefile | 1 +
drivers/staging/Kconfig | 6 +++
drivers/staging/Makefile | 3 ++
drivers/staging/fsl-dpaa2/Kconfig | 65 +++++++++++++++++++++++++
drivers/staging/fsl-dpaa2/Makefile | 9 ++++
18 files changed, 192 insertions(+), 4 deletions(-)
create mode 100644 drivers/soc/fsl/Kconfig
create mode 100644 drivers/soc/fsl/Kconfig.arm
create mode 100644 drivers/soc/fsl/layerscape/Kconfig
create mode 100644 drivers/soc/fsl/layerscape/Makefile
create mode 100644 drivers/staging/fsl-dpaa2/Kconfig
create mode 100644 drivers/staging/fsl-dpaa2/Makefile
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,6 +1,7 @@
menuconfig ARCH_MXC
bool "Freescale i.MX family"
depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
+ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_IMX_GPT
select GENERIC_IRQ_CHIP
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -240,6 +240,7 @@ config GENERIC_CPU_VULNERABILITIES
config SOC_BUS
bool
+ select GLOB
source "drivers/base/regmap/Kconfig"
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -3,7 +3,7 @@ obj-$(CONFIG_CRYPTO_DEV_ATMEL_SHA) += at
obj-$(CONFIG_CRYPTO_DEV_ATMEL_TDES) += atmel-tdes.o
obj-$(CONFIG_CRYPTO_DEV_BFIN_CRC) += bfin_crc.o
obj-$(CONFIG_CRYPTO_DEV_CCP) += ccp/
-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam/
+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON) += caam/
obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o
obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
obj-$(CONFIG_CRYPTO_DEV_IMGTEC_HASH) += img-hash.o
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -5,7 +5,7 @@
config NET_VENDOR_FREESCALE
bool "Freescale devices"
default y
- depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
+ depends on FSL_SOC || (QUICC_ENGINE && PPC32) || CPM1 || CPM2 || PPC_MPC512x || \
M523x || M527x || M5272 || M528x || M520x || M532x || \
ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \
ARCH_LAYERSCAPE
@@ -93,4 +93,6 @@ config GIANFAR
and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
on the 8540.
+source "drivers/net/ethernet/freescale/sdk_fman/Kconfig"
+source "drivers/net/ethernet/freescale/sdk_dpaa/Kconfig"
endif # NET_VENDOR_FREESCALE
--- a/drivers/net/ethernet/freescale/Makefile
+++ b/drivers/net/ethernet/freescale/Makefile
@@ -21,4 +21,6 @@ gianfar_driver-objs := gianfar.o \
obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
+obj-$(if $(CONFIG_FSL_SDK_FMAN),y) += sdk_fman/
+obj-$(if $(CONFIG_FSL_SDK_DPAA_ETH),y) += sdk_dpaa/
obj-$(CONFIG_FSL_FMAN) += fman/
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -39,6 +39,35 @@ config PTP_1588_CLOCK_GIANFAR
To compile this driver as a module, choose M here: the module
will be called gianfar_ptp.
+config PTP_1588_CLOCK_DPAA
+ tristate "Freescale DPAA as PTP clock"
+ depends on FSL_SDK_DPAA_ETH
+ select PTP_1588_CLOCK
+ select FSL_DPAA_TS
+ default n
+ help
+ This driver adds support for using the DPAA 1588 timer module
+ as a PTP clock. This clock is only useful if your PTP programs are
+ getting hardware time stamps on the PTP Ethernet packets
+ using the SO_TIMESTAMPING API.
+
+ To compile this driver as a module, choose M here: the module
+ will be called dpaa_ptp.
+
+config PTP_1588_CLOCK_DPAA2
+ tristate "Freescale DPAA2 as PTP clock"
+ depends on FSL_DPAA2_ETH
+ select PTP_1588_CLOCK
+ default y
+ help
+ This driver adds support for using the DPAA2 1588 timer module
+ as a PTP clock. This clock is only useful if your PTP programs are
+ getting hardware time stamps on the PTP Ethernet packets
+ using the SO_TIMESTAMPING API.
+
+ To compile this driver as a module, choose M here: the module
+ will be called dpaa2-rtc.
+
config PTP_1588_CLOCK_IXP46X
tristate "Intel IXP46x as PTP clock"
depends on IXP4XX_ETH
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -414,6 +414,14 @@ config RTC_DRV_PCF85063
This driver can also be built as a module. If so, the module
will be called rtc-pcf85063.
+config RTC_DRV_PCF85263
+ tristate "NXP PCF85263"
+ help
+ If you say yes here you get support for the PCF85263 RTC chip
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-pcf85263.
+
config RTC_DRV_PCF8563
tristate "Philips PCF8563/Epson RTC8564"
help
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -111,6 +111,7 @@ obj-$(CONFIG_RTC_DRV_PCF2127) += rtc-pcf
obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o
obj-$(CONFIG_RTC_DRV_PCF85063) += rtc-pcf85063.o
obj-$(CONFIG_RTC_DRV_PCF8523) += rtc-pcf8523.o
+obj-$(CONFIG_RTC_DRV_PCF85263) += rtc-pcf85263.o
obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
obj-$(CONFIG_RTC_DRV_PIC32) += rtc-pic32.o
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -1,8 +1,7 @@
menu "SOC (System On Chip) specific Drivers"
source "drivers/soc/bcm/Kconfig"
-source "drivers/soc/fsl/qbman/Kconfig"
-source "drivers/soc/fsl/qe/Kconfig"
+source "drivers/soc/fsl/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/rockchip/Kconfig"
--- /dev/null
+++ b/drivers/soc/fsl/Kconfig
@@ -0,0 +1,30 @@
+#
+# Freescale SOC drivers
+#
+
+source "drivers/soc/fsl/qbman/Kconfig"
+source "drivers/soc/fsl/qe/Kconfig"
+source "drivers/soc/fsl/ls2-console/Kconfig"
+
+config FSL_GUTS
+ bool
+ select SOC_BUS
+ help
+ The global utilities block controls power management, I/O device
+ enabling, power-onreset(POR) configuration monitoring, alternate
+ function selection for multiplexed signals,and clock control.
+ This driver is to manage and access global utilities block.
+ Initially only reading SVR and registering soc device are supported.
+ Other guts accesses, such as reading RCW, should eventually be moved
+ into this driver as well.
+
+config FSL_SLEEP_FSM
+ bool
+ help
+ This driver configures a hardware FSM (Finite State Machine) for deep sleep.
+ The FSM is used to finish clean-ups at the last stage of system entering deep
+ sleep, and also wakes up system when a wake up event happens.
+
+if ARM || ARM64
+source "drivers/soc/fsl/Kconfig.arm"
+endif
--- /dev/null
+++ b/drivers/soc/fsl/Kconfig.arm
@@ -0,0 +1,16 @@
+#
+# Freescale ARM SOC Drivers
+#
+
+config LS_SOC_DRIVERS
+ bool "Layerscape Soc Drivers"
+ depends on ARCH_LAYERSCAPE || SOC_LS1021A
+ default n
+ help
+ Say y here to enable Freescale Layerscape Soc Device Drivers support.
+ The Soc Drivers provides the device driver that is a specific block
+ or feature on Layerscape platform.
+
+if LS_SOC_DRIVERS
+ source "drivers/soc/fsl/layerscape/Kconfig"
+endif
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -5,3 +5,8 @@
obj-$(CONFIG_FSL_DPAA) += qbman/
obj-$(CONFIG_QUICC_ENGINE) += qe/
obj-$(CONFIG_CPM) += qe/
+obj-$(CONFIG_FSL_GUTS) += guts.o
+obj-$(CONFIG_FSL_LS2_CONSOLE) += ls2-console/
+obj-$(CONFIG_SUSPEND) += rcpm.o
+obj-$(CONFIG_LS_SOC_DRIVERS) += layerscape/
+obj-$(CONFIG_FSL_SLEEP_FSM) += sleep_fsm.o
--- /dev/null
+++ b/drivers/soc/fsl/layerscape/Kconfig
@@ -0,0 +1,10 @@
+#
+# Layerscape Soc drivers
+#
+config FTM_ALARM
+ bool "FTM alarm driver"
+ default n
+ help
+ Say y here to enable FTM alarm support. The FTM alarm provides
+ alarm functions for wakeup system from deep sleep. There is only
+ one FTM can be used in ALARM(FTM 0).
--- /dev/null
+++ b/drivers/soc/fsl/layerscape/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_FTM_ALARM) += ftm_alarm.o
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -94,6 +94,8 @@ source "drivers/staging/fbtft/Kconfig"
source "drivers/staging/fsl-mc/Kconfig"
+source "drivers/staging/fsl-dpaa2/Kconfig"
+
source "drivers/staging/wilc1000/Kconfig"
source "drivers/staging/most/Kconfig"
@@ -106,4 +108,8 @@ source "drivers/staging/greybus/Kconfig"
source "drivers/staging/vc04_services/Kconfig"
+source "drivers/staging/fsl_qbman/Kconfig"
+
+source "drivers/staging/fsl_ppfe/Kconfig"
+
endif # STAGING
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -36,9 +36,12 @@ obj-$(CONFIG_UNISYSSPAR) += unisys/
obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clocking-wizard/
obj-$(CONFIG_FB_TFT) += fbtft/
obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
+obj-$(CONFIG_FSL_DPAA2) += fsl-dpaa2/
obj-$(CONFIG_WILC1000) += wilc1000/
obj-$(CONFIG_MOST) += most/
obj-$(CONFIG_ISDN_I4L) += i4l/
obj-$(CONFIG_KS7010) += ks7010/
obj-$(CONFIG_GREYBUS) += greybus/
obj-$(CONFIG_BCM2708_VCHIQ) += vc04_services/
+obj-$(CONFIG_FSL_SDK_DPA) += fsl_qbman/
+obj-$(CONFIG_FSL_PPFE) += fsl_ppfe/
--- /dev/null
+++ b/drivers/staging/fsl-dpaa2/Kconfig
@@ -0,0 +1,65 @@
+#
+# Freescale DataPath Acceleration Architecture Gen2 (DPAA2) drivers
+#
+
+config FSL_DPAA2
+ bool "Freescale DPAA2 devices"
+ depends on FSL_MC_BUS
+ ---help---
+ Build drivers for Freescale DataPath Acceleration
+ Architecture (DPAA2) family of SoCs.
+
+config FSL_DPAA2_ETH
+ tristate "Freescale DPAA2 Ethernet"
+ depends on FSL_DPAA2 && FSL_MC_DPIO
+ ---help---
+ Ethernet driver for Freescale DPAA2 SoCs, using the
+ Freescale MC bus driver
+
+if FSL_DPAA2_ETH
+config FSL_DPAA2_ETH_USE_ERR_QUEUE
+ bool "Enable Rx error queue"
+ default n
+ ---help---
+ Allow Rx error frames to be enqueued on an error queue
+ and processed by the driver (by default they are dropped
+ in hardware).
+ This may impact performance, recommended for debugging
+ purposes only.
+
+# QBMAN_DEBUG requires some additional DPIO APIs
+config FSL_DPAA2_ETH_DEBUGFS
+ depends on DEBUG_FS
+ bool "Enable debugfs support"
+ default n
+ ---help---
+ Enable advanced statistics through debugfs interface.
+
+config FSL_DPAA2_ETH_DCB
+ bool "Data Center Bridging (DCB) Support"
+ default n
+ depends on DCB
+ ---help---
+ Say Y here if you want to use Data Center Bridging (DCB) features
+ (PFC) in the driver.
+
+ If unsure, say N.
+
+config FSL_DPAA2_ETH_CEETM
+ depends on NET_SCHED
+ bool "DPAA2 Ethernet CEETM QoS"
+ default n
+ ---help---
+ Enable QoS offloading support through the CEETM hardware block.
+endif
+
+source "drivers/staging/fsl-dpaa2/mac/Kconfig"
+source "drivers/staging/fsl-dpaa2/evb/Kconfig"
+
+config FSL_DPAA2_ETHSW
+ tristate "Freescale DPAA2 Ethernet Switch"
+ depends on FSL_DPAA2
+ depends on NET_SWITCHDEV
+ ---help---
+ Driver for Freescale DPAA2 Ethernet Switch. Select
+ BRIDGE to have support for bridge tools.
--- /dev/null
+++ b/drivers/staging/fsl-dpaa2/Makefile
@@ -0,0 +1,9 @@
+#
+# Freescale DataPath Acceleration Architecture Gen2 (DPAA2) drivers
+#
+
+obj-$(CONFIG_FSL_DPAA2_ETH) += ethernet/
+obj-$(CONFIG_FSL_DPAA2_MAC) += mac/
+obj-$(CONFIG_FSL_DPAA2_EVB) += evb/
+obj-$(CONFIG_PTP_1588_CLOCK_DPAA2) += rtc/
+obj-$(CONFIG_FSL_DPAA2_ETHSW) += ethsw/