openwrtv3/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts

/dts-v1/;

#include "ar9.dtsi"

#include <dt-bindings/input/input.h>

/ {
	compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9";
	model = "ZyXEL P-2601HN-Fx";

	chosen {
		bootargs = "console=ttyLTQ0,115200";
	};

	aliases {
		led-boot = &power_green;
		led-failsafe = &power_red;
		led-running = &power_green;

		led-dsl = &dsl;
		led-internet = &online;
		led-wifi = &wifi;
	};

	memory@0 {
		reg = <0x0 0x4000000>;
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <100>;

		reset {
			label = "reset";
			gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
		rfkill {
			label = "rfkill";
			gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RFKILL>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		power_green: power {
			label = "p2601hnfx:green:power";
			gpios = <&stp 11 GPIO_ACTIVE_LOW>;
			default-state = "keep";
		};
		power_red: power2 {
			label = "p2601hnfx:red:power";
			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
		};
		online: online {
			label = "p2601hnfx:green:internet";
			gpios = <&stp 13 GPIO_ACTIVE_LOW>;
		};
		online2 {
			label = "p2601hnfx:red:internet";
			gpios = <&stp 12 GPIO_ACTIVE_LOW>;
		};
		dsl: dsl {
			label = "p2601hnfx:green:dsl";
			gpios = <&stp 14 GPIO_ACTIVE_LOW>;
		};
		phone {
			label = "p2601hnfx:green:phone";
			gpios = <&stp 9 GPIO_ACTIVE_LOW>;
		};
		phone2 {
			label = "p2601hnfx:orange:phone";
			gpios = <&stp 8 GPIO_ACTIVE_LOW>;
		};
		wifi: wifi {
			label = "p2601hnfx:green:wireless";
			gpios = <&stp 15 GPIO_ACTIVE_LOW>;
		};
		wifi2 {
			label = "p2601hnfx:orange:wireless";
			gpios = <&stp 10 GPIO_ACTIVE_LOW>;
		};
	};

	gpio_export {
		compatible = "gpio-export";
		#size-cells = <0>;

		switch {
			gpio-export,name = "switch";
			gpio-export,output = <1>;
			gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
		};
	};
};

&gpio {
	pinctrl-names = "default";
	pinctrl-0 = <&state_default>;

	state_default: pinmux {
		stp {
			lantiq,groups = "stp";
			lantiq,function = "stp";
			lantiq,pull = <2>;
			lantiq,open-drain = <0>;
			lantiq,output = <1>;
		};
		exin {
			lantiq,groups = "exin1";
			lantiq,function = "exin";
		};
		pci {
			lantiq,groups = "gnt1";
			lantiq,function = "pci";
		};
		conf_out {
			lantiq,pins = "io4", "io5", "io6";
			lantiq,open-drain;
			lantiq,pull = <0>;
		};
		mdio {
			lantiq,groups = "mdio";
			lantiq,function = "mdio";
		};
	};

	usb_vbus: regulator-usb-vbus {
		compatible = "regulator-fixed";

		regulator-name = "USB_VBUS";

		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;

		gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};
};

&gsw {
	phy-mode = "rmii";
};

&localbus {
	nor@0 {
		compatible = "lantiq,nor";
		bank-width = <2>;
		reg = <0 0x0 0x2000000>;
		#address-cells = <1>;
		#size-cells = <1>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "uboot";
				reg = <0x00000 0x40000>;
				read-only;
			};

			partition@40000 {
				label = "uboot_env";
				reg = <0x40000 0x20000>;
				read-only;
			};

			partition@60000 {
				label = "firmware";
				reg = <0x60000 0xfa0000>;
			};
		};
	};
};

&stp {
	lantiq,shadow = <0xfff>;
	lantiq,groups = <0x3>;
};

&usb_phy0 {
	status = "okay";
	phy-supply = <&usb_vbus>;
};

&usb0 {
	status = "okay";
};