openwrtv3/target/Config.in

source "tmp/.config-target.in"

# Kernel/Hardware features

config HAS_SPE_FPU
	depends on powerpc
	select HAS_FPU
	bool

config HAS_FPU
	bool

config AUDIO_SUPPORT
	bool

config GPIO_SUPPORT
	bool

config PCI_SUPPORT
	select AUDIO_SUPPORT
	bool

config PCIE_SUPPORT
	bool

config PCMCIA_SUPPORT
	bool

config USB_SUPPORT
	select AUDIO_SUPPORT
	bool

config USB_GADGET_SUPPORT
	bool

config RTC_SUPPORT
	bool

config BIG_ENDIAN
	bool

config USES_DEVICETREE
	bool

config USES_INITRAMFS
	bool

config USES_SQUASHFS
	bool

config USES_JFFS2
	bool

config USES_JFFS2_NAND
	bool

config USES_EXT4
	bool

config USES_TARGZ
	bool

config USES_CPIOGZ
	bool

config USES_MINOR
	bool

config USES_UBIFS
	bool
	select NAND_SUPPORT

config LOW_MEMORY_FOOTPRINT
	bool

config SMALL_FLASH
	bool

config NOMMU
	bool

config HAS_MIPS16
	depends on (mips || mipsel || mips64 || mips64el)
	bool

config RFKILL_SUPPORT
	bool

config NAND_SUPPORT
	bool

config ARCH_64BIT
	bool

# Architecture selection

config aarch64
	select ARCH_64BIT
	bool

config aarch64_be
	select ARCH_64BIT
	select BIG_ENDIAN
	bool

config arc
	bool

config arceb
	select BIG_ENDIAN
	bool

config arm
	bool

config armeb
	select BIG_ENDIAN
	bool

config arm_v6
	bool

config arm_v7
	bool

config i386
	bool

config i686
	bool 

config m68k
	bool

config mips
	select BIG_ENDIAN
	bool

config mipsel
	bool

config mips64
	select BIG_ENDIAN
	select ARCH_64BIT
	bool

config mips64el
	select ARCH_64BIT
	bool

config powerpc
	select BIG_ENDIAN
	bool

config powerpc64
	select BIG_ENDIAN
	select ARCH_64BIT
	bool

config sh3
	bool

config sh3eb
	select BIG_ENDIAN
	bool

config sh4
	bool

config sh4eb
	select BIG_ENDIAN
	bool

config sparc
	select BIG_ENDIAN
	bool

config x86_64
	select ARCH_64BIT
	bool

config ARCH
	string
	default "aarch64"   if aarch64
	default "aarch64_be" if aarch64_be
	default "arc"       if arc
	default "arceb"     if arceb
	default "arm"       if arm
	default "armeb"     if armeb
	default "i386"      if i386
	default "i686"      if i686
	default "m68k"      if m68k
	default "mips"      if mips
	default "mipsel"    if mipsel
	default "mips64"    if mips64
	default "mips64el"  if mips64el
	default "powerpc"   if powerpc
	default "sh3"       if sh3
	default "sh3eb"     if sh3eb
	default "sh4"       if sh4
	default "sh4eb"     if sh4eb
	default "sparc"     if sparc
	default "x86_64"    if x86_64
make target/linux/* directories self-contained, use the selected kernel version for the toolchain, autogenerate menuconfig and makefile code for target selection SVN-Revision: 5498 2006-11-11 23:11:02 +00:00			`source "tmp/.config-target.in"`
UML target completed. Added ext2 target fs for use with uml images SVN-Revision: 4178 2006-07-20 21:06:47 +00:00
menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`# Kernel/Hardware features`

mpc85xx: add a new 'spe_fpu' feature flag for the FPU used on freescale powerpc cpus The SPE FPU is ABI-incompatible with the regular powerpc FPU, this needs to be reflected in the toolchain target name. Fixes floating point crashes in user space SVN-Revision: 25018 2011-01-16 01:25:06 +00:00			`config HAS_SPE_FPU`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on powerpc`
mpc85xx: add a new 'spe_fpu' feature flag for the FPU used on freescale powerpc cpus The SPE FPU is ABI-incompatible with the regular powerpc FPU, this needs to be reflected in the toolchain target name. Fixes floating point crashes in user space SVN-Revision: 25018 2011-01-16 01:25:06 +00:00			`select HAS_FPU`
			`bool`

add new target feature option for fpu SVN-Revision: 11337 2008-06-03 09:29:58 +00:00			`config HAS_FPU`
			`bool`

Add audio feature flag. There are targets which neither have usb host nor pci support but do have audio capabilities. Those targets should expliclitly specifiy that they support audio through the new feature flag. The audio feature flag is also implicitly selected by the usb and pci feature flags. SVN-Revision: 19643 2010-02-15 20:03:18 +00:00			`config AUDIO_SUPPORT`
			`bool`

add a gpio feature for devices supporting the generic GPIO interface SVN-Revision: 10879 2008-04-20 09:46:45 +00:00			`config GPIO_SUPPORT`
			`bool`

menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`config PCI_SUPPORT`
Add audio feature flag. There are targets which neither have usb host nor pci support but do have audio capabilities. Those targets should expliclitly specifiy that they support audio through the new feature flag. The audio feature flag is also implicitly selected by the usb and pci feature flags. SVN-Revision: 19643 2010-02-15 20:03:18 +00:00			`select AUDIO_SUPPORT`
menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`bool`

missing changes for pcie handling SVN-Revision: 16294 2009-06-02 09:54:45 +00:00			`config PCIE_SUPPORT`
			`bool`

menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`config PCMCIA_SUPPORT`
			`bool`

introduce USB_SUPPORT, clean up some dependencies SVN-Revision: 4690 2006-08-27 13:32:10 +00:00			`config USB_SUPPORT`
Add audio feature flag. There are targets which neither have usb host nor pci support but do have audio capabilities. Those targets should expliclitly specifiy that they support audio through the new feature flag. The audio feature flag is also implicitly selected by the usb and pci feature flags. SVN-Revision: 19643 2010-02-15 20:03:18 +00:00			`select AUDIO_SUPPORT`
introduce USB_SUPPORT, clean up some dependencies SVN-Revision: 4690 2006-08-27 13:32:10 +00:00			`bool`

Add usb gadget feature flag SVN-Revision: 22798 2010-08-25 17:35:34 +00:00			`config USB_GADGET_SUPPORT`
			`bool`

target: add a feature flag for RTC support SVN-Revision: 31777 2012-05-17 15:28:09 +00:00			`config RTC_SUPPORT`
			`bool`

resync with kamikaze SVN-Revision: 3844 2006-05-30 19:38:38 +00:00			`config BIG_ENDIAN`
			`bool`
menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00
add a feature flag for device tree support Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38893 2013-11-22 12:01:01 +00:00			`config USES_DEVICETREE`
			`bool`

Add FEATURE ramdisk to be able to select the use of INITRAMFS for a sub-target SVN-Revision: 14939 2009-03-18 15:57:18 +00:00			`config USES_INITRAMFS`
			`bool`

clean up filesystem selction SVN-Revision: 4847 2006-09-23 22:03:23 +00:00			`config USES_SQUASHFS`
			`bool`

			`config USES_JFFS2`
			`bool`

target: split jffs2 NAND out of jffs2 Make jffs2_nand a separate option so this can be triggered without forcing jffs2 images for nor targets. Adds a new NAND_BLOCKSIZE variable that allows setting the generated layout in <page_size>:<block_size> pairs. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36860 2013-06-05 20:58:03 +00:00			`config USES_JFFS2_NAND`
			`bool`

switch from ext2 to ext4 (w/o) journaling SVN-Revision: 24084 2010-11-22 12:12:39 +00:00			`config USES_EXT4`
add USES_EXT2 flag for target platforms SVN-Revision: 5175 2006-10-17 01:25:20 +00:00			`bool`

buildsystem: rename tgz/TGZ "feature" and matching options to targz/TARGZ SVN-Revision: 21238 2010-04-28 14:47:43 +00:00			`config USES_TARGZ`
Add a USES_TGZ config.in variable, so that RB1xx profiles can use it SVN-Revision: 8039 2007-07-18 14:11:44 +00:00			`bool`

add feature flag for the cpio.gz support SVN-Revision: 10311 2008-01-29 13:56:43 +00:00			`config USES_CPIOGZ`
			`bool`

tools: add kernel2minor utility for Mikrotik devices This patch adds support of Mikrotik yaffs2 filesystem image for kernel file and tools/kernel2minor package. We neede this to boot kernel through RouterBoot on new Mikrotik NOR flash devices. Signed-off-by: Sergey Sergeev <adron@yapic.net> 2016-06-28 11:55:12 +00:00			`config USES_MINOR`
			`bool`

Add support for building ubifs images. SVN-Revision: 19097 2010-01-11 01:10:45 +00:00			`config USES_UBIFS`
			`bool`
kernel: add a NAND_SUPPORT symbol Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41122 2014-06-11 12:59:22 +00:00			`select NAND_SUPPORT`
Add support for building ubifs images. SVN-Revision: 19097 2010-01-11 01:10:45 +00:00
build: add a feature flag for low-memory systems Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40980 2014-06-02 17:04:38 +00:00			`config LOW_MEMORY_FOOTPRINT`
			`bool`

config: add a small_flash feature this causes KALLSYMS to be off by default Signed-off-by: John Crispin <john@phrozen.org> 2016-06-13 19:35:03 +00:00			`config SMALL_FLASH`
			`bool`

add nommu target feature flag SVN-Revision: 17347 2009-08-21 22:32:03 +00:00			`config NOMMU`
			`bool`

buildroot: allow enabling MIPS16 user-space build Enabling MIPS16 is made conditional on advertising the "mips16" feature for a specific target since it requires support from the CPU (HAS_MIPS16) and the actual use of MIPS16 for building packages (USE_MIPS16). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36202 2013-04-05 12:36:12 +00:00			`config HAS_MIPS16`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on (mips \|\| mipsel \|\| mips64 \|\| mips64el)`
buildroot: allow enabling MIPS16 user-space build Enabling MIPS16 is made conditional on advertising the "mips16" feature for a specific target since it requires support from the CPU (HAS_MIPS16) and the actual use of MIPS16 for building packages (USE_MIPS16). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36202 2013-04-05 12:36:12 +00:00			`bool`

kernel: add a new global config symbol for enabling rfkill support (can be enabled by default via target feature flag) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37491 2013-07-21 11:55:30 +00:00			`config RFKILL_SUPPORT`
			`bool`

kernel: add a NAND_SUPPORT symbol Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41122 2014-06-11 12:59:22 +00:00			`config NAND_SUPPORT`
			`bool`

buildroot: factor knowledge of a 64bits architecture Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36204 2013-04-05 12:36:19 +00:00			`config ARCH_64BIT`
			`bool`

menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`# Architecture selection`

aarch64: add initial support Add initial support for the AArch64 architecture Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43353 2014-11-24 06:33:13 +00:00			`config aarch64`
			`select ARCH_64BIT`
			`bool`

			`config aarch64_be`
			`select ARCH_64BIT`
			`select BIG_ENDIAN`
			`bool`

toolchain: add support of ARC architecture This includes binutils, gcc, gdb and uClibc-ng. Latest release of ARC gcc (as of today it is "arc-2015.06") is based on upstream gcc 4.8.4. Sources are available on GitHub, see: https://github.com/foss-for-synopsys-dwc-arc-processors/gcc Latest release of ARC binutils (as of today it is "arc-2015.06") is based on upstream binutils 2.23. Sources are available on GitHub, see: https://github.com/foss-for-synopsys-dwc-arc-processors/binutils-gdb/releases/tag/arc-2015.06 Latest release of ARC GDB (as of today this is "arc-2015.06-gdb") is based on upstream gdb 7.9.1. Sources are available on GitHub, see: https://github.com/foss-for-synopsys-dwc-arc-processors/binutils-gdb/releases/tag/arc-2015.06-gdb Note that for binutils and gdb that come from unified git repository (which is the case for upstream binutils/gdb today) we need to disable building of gdb in binutils and binutils in gdb hence in binutils: ------>8------ --disable-sim --disable-gdb ------>8------ and in gdb: ------>8------ --disable-binutils --disable-ld --disable-gas ------>8------ Also in gdb we disable sim because if the following breakage while building with it: ------------>8------------ /usr/bin/env bash ./../common/genmloop.sh -shell /usr/bin/env bash \ -mono -fast -pbb -switch sem5-switch.c \ -cpu a5f -infile ./mloop5.in \ -outfile-suffix 5 unknown option: bash Makefile:699: recipe for target 'stamp-5mloop' failed make[7]: *** [stamp-5mloop] Error 1 ------------>8------------ Cc: Felix Fietkau <nbd@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47438 2015-11-10 12:03:59 +00:00			`config arc`
			`bool`

			`config arceb`
			`select BIG_ENDIAN`
			`bool`

sort & rearrange arch selection SVN-Revision: 18904 2009-12-23 10:38:26 +00:00			`config arm`
menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`bool`
added i686 support and profile for t-vision s100 SVN-Revision: 7890 2007-07-08 16:11:40 +00:00
sort & rearrange arch selection SVN-Revision: 18904 2009-12-23 10:38:26 +00:00			`config armeb`
add preliminary coldfire v4e support SVN-Revision: 16538 2009-06-21 18:34:07 +00:00			`select BIG_ENDIAN`
			`bool`

build: add config symbols for different ARM arch levels Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36620 2013-05-13 15:04:58 +00:00			`config arm_v6`
			`bool`

			`config arm_v7`
			`bool`

sort & rearrange arch selection SVN-Revision: 18904 2009-12-23 10:38:26 +00:00			`config i386`
add a modified version of the mips64 patch from #4603 SVN-Revision: 15249 2009-04-18 17:03:55 +00:00			`bool`

sort & rearrange arch selection SVN-Revision: 18904 2009-12-23 10:38:26 +00:00			`config i686`
			`bool`
add a modified version of the mips64 patch from #4603 SVN-Revision: 15249 2009-04-18 17:03:55 +00:00
sort & rearrange arch selection SVN-Revision: 18904 2009-12-23 10:38:26 +00:00			`config m68k`
fix ipsec-tools dependencies SVN-Revision: 3600 2006-04-08 17:33:18 +00:00			`bool`

sort & rearrange arch selection SVN-Revision: 18904 2009-12-23 10:38:26 +00:00			`config mips`
move BIG_ENDIAN selection to arch configs SVN-Revision: 4900 2006-10-03 19:09:39 +00:00			`select BIG_ENDIAN`
Move device selection first in menuconfig (#18) SVN-Revision: 2880 2006-01-10 20:45:12 +00:00			`bool`
menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00
sort & rearrange arch selection SVN-Revision: 18904 2009-12-23 10:38:26 +00:00			`config mipsel`
add support for the AVR32 platform, namely the ATNGW100 board - joint work with wigyori SVN-Revision: 7533 2007-06-08 10:44:01 +00:00			`bool`

sort & rearrange arch selection SVN-Revision: 18904 2009-12-23 10:38:26 +00:00			`config mips64`
			`select BIG_ENDIAN`
buildroot: factor knowledge of a 64bits architecture Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36204 2013-04-05 12:36:19 +00:00			`select ARCH_64BIT`
menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`bool`

sort & rearrange arch selection SVN-Revision: 18904 2009-12-23 10:38:26 +00:00			`config mips64el`
buildroot: factor knowledge of a 64bits architecture Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36204 2013-04-05 12:36:19 +00:00			`select ARCH_64BIT`
menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`bool`

			`config powerpc`
move BIG_ENDIAN selection to arch configs SVN-Revision: 4900 2006-10-03 19:09:39 +00:00			`select BIG_ENDIAN`
menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`bool`

powerpc: Create a powerpc64 config feature The config symbol TARGET_ps3 is used in the build files where special handling for the 64 bit PowerPC processors is needed. Introduce a new config feature powerpc64, and replace the use of TARGET_ps3 with powerpc64. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> SVN-Revision: 17306 2009-08-18 23:07:45 +00:00			`config powerpc64`
Config.in: fix powerpc64 endianness SVN-Revision: 18828 2009-12-18 16:30:26 +00:00			`select BIG_ENDIAN`
buildroot: factor knowledge of a 64bits architecture Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36204 2013-04-05 12:36:19 +00:00			`select ARCH_64BIT`
powerpc: Create a powerpc64 config feature The config symbol TARGET_ps3 is used in the build files where special handling for the 64 bit PowerPC processors is needed. Introduce a new config feature powerpc64, and replace the use of TARGET_ps3 with powerpc64. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> SVN-Revision: 17306 2009-08-18 23:07:45 +00:00			`bool`

menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`config sh3`
			`bool`

			`config sh3eb`
move BIG_ENDIAN selection to arch configs SVN-Revision: 4900 2006-10-03 19:09:39 +00:00			`select BIG_ENDIAN`
menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`bool`

			`config sh4`
			`bool`

			`config sh4eb`
move BIG_ENDIAN selection to arch configs SVN-Revision: 4900 2006-10-03 19:09:39 +00:00			`select BIG_ENDIAN`
menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`bool`

			`config sparc`
move BIG_ENDIAN selection to arch configs SVN-Revision: 4900 2006-10-03 19:09:39 +00:00			`select BIG_ENDIAN`
menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`bool`

sort & rearrange arch selection SVN-Revision: 18904 2009-12-23 10:38:26 +00:00			`config x86_64`
buildroot: factor knowledge of a 64bits architecture Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36204 2013-04-05 12:36:19 +00:00			`select ARCH_64BIT`
sort & rearrange arch selection SVN-Revision: 18904 2009-12-23 10:38:26 +00:00			`bool`

menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00			`config ARCH`
			`string`
aarch64: add initial support Add initial support for the AArch64 architecture Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43353 2014-11-24 06:33:13 +00:00			`default "aarch64" if aarch64`
			`default "aarch64_be" if aarch64_be`
toolchain: add support of ARC architecture This includes binutils, gcc, gdb and uClibc-ng. Latest release of ARC gcc (as of today it is "arc-2015.06") is based on upstream gcc 4.8.4. Sources are available on GitHub, see: https://github.com/foss-for-synopsys-dwc-arc-processors/gcc Latest release of ARC binutils (as of today it is "arc-2015.06") is based on upstream binutils 2.23. Sources are available on GitHub, see: https://github.com/foss-for-synopsys-dwc-arc-processors/binutils-gdb/releases/tag/arc-2015.06 Latest release of ARC GDB (as of today this is "arc-2015.06-gdb") is based on upstream gdb 7.9.1. Sources are available on GitHub, see: https://github.com/foss-for-synopsys-dwc-arc-processors/binutils-gdb/releases/tag/arc-2015.06-gdb Note that for binutils and gdb that come from unified git repository (which is the case for upstream binutils/gdb today) we need to disable building of gdb in binutils and binutils in gdb hence in binutils: ------>8------ --disable-sim --disable-gdb ------>8------ and in gdb: ------>8------ --disable-binutils --disable-ld --disable-gas ------>8------ Also in gdb we disable sim because if the following breakage while building with it: ------------>8------------ /usr/bin/env bash ./../common/genmloop.sh -shell /usr/bin/env bash \ -mono -fast -pbb -switch sem5-switch.c \ -cpu a5f -infile ./mloop5.in \ -outfile-suffix 5 unknown option: bash Makefile:699: recipe for target 'stamp-5mloop' failed make[7]: *** [stamp-5mloop] Error 1 ------------>8------------ Cc: Felix Fietkau <nbd@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47438 2015-11-10 12:03:59 +00:00			`default "arc" if arc`
			`default "arceb" if arceb`
sort & rearrange arch selection SVN-Revision: 18904 2009-12-23 10:38:26 +00:00			`default "arm" if arm`
			`default "armeb" if armeb`
			`default "i386" if i386`
			`default "i686" if i686`
			`default "m68k" if m68k`
			`default "mips" if mips`
			`default "mipsel" if mipsel`
			`default "mips64" if mips64`
			`default "mips64el" if mips64el`
			`default "powerpc" if powerpc`
			`default "sh3" if sh3`
			`default "sh3eb" if sh3eb`
			`default "sh4" if sh4`
			`default "sh4eb" if sh4eb`
			`default "sparc" if sparc`
			`default "x86_64" if x86_64`
menuconfig cleanup SVN-Revision: 3684 2006-04-20 23:03:42 +00:00