openwrtv3/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.h

124 lines
2.6 KiB
C
Raw Normal View History

/*
* drivers/net/phy/mv88e6176.h
*
* Driver for Marvell Switch
*
* Author: Tim Harvey
*
* Copyright (c) 2014 Tim Harvey <tharvey@gateworks.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef _GW16083_H_
#define _GW16083_H_
#define MII_MARVELL_PHY_PAGE 22
/*
* I2C Addresses
*/
#define GW16083_I2C_ADDR_SFP1 0x50
#define GW16083_I2C_ADDR_SFP2 0x51
#define GW16083_I2C_ADDR_EEPROM 0x52
#define GW16083_I2C_ADDR_PCA9543 0x70
/*
* MV88E1111 PHY Registers
*/
enum {
MII_M1111_PHY_CONTROL = 0,
MII_M1111_PHY_STATUS = 1,
MII_M1111_PHY_IDENT0 = 2,
MII_M1111_PHY_IDENT1 = 3,
MII_M1111_PHY_EXT_CR = 20,
MII_M1111_PHY_LED_CONTROL = 24,
MII_M1111_PHY_EXT_SR = 27,
};
#define MII_M1111_PHY_ID_MASK 0xfffffff0
#define MII_M1111_PHY_ID 0x01410cc0
#define MII_M1111_PHY_CONTROL_RESET (1 << 15)
#define MII_M1111_PHY_LED_DIRECT 0x4100
#define MII_M1111_PHY_LED_PULSE_STR 0x4111
#define MII_M1111_PHY_LED_COMBINE 0x411c
#define MII_M1111_RX_DELAY 0x80
#define MII_M1111_TX_DELAY 0x2
/*
* MV88E6176 Switch Registers
*/
/* PHY Addrs */
#define MV_BASE 0x10
#define MV_GLOBAL1 0x1b
#define MV_GLOBAL2 0x1c
#define MV_GLOBAL3 0x1d
/* Global2 Registers */
enum {
MV_SMI_PHY_COMMAND = 0x18,
MV_SMI_PHY_DATA = 0x19,
MV_SCRATCH_MISC = 0x1A,
};
/* Scratch And Misc Reg offsets */
enum {
MV_GPIO_MODE = 0x60,
MV_GPIO_DIR = 0x62,
MV_GPIO_DATA = 0x64,
MV_GPIO76_CNTL = 0x6B,
MV_GPIO54_CNTL = 0x6A,
MV_GPIO32_CNTL = 0x69,
MV_GPIO10_CNTL = 0x68,
MV_CONFIG0 = 0x70,
MV_CONFIG1 = 0x71,
MV_CONFIG2 = 0x72,
MV_CONFIG3 = 0x73,
};
/* PHY Registers */
enum {
MV_PHY_CONTROL = 0x00,
MV_PHY_STATUS = 0x01,
MV_PHY_IDENT0 = 0x02,
MV_PHY_IDENT1 = 0x03,
MV_PHY_ANEG = 0x04,
MV_PHY_LINK_ABILITY = 0x05,
MV_PHY_ANEG_EXPAND = 0x06,
MV_PHY_XMIT_NEXTP = 0x07,
MV_PHY_LINK_NEXTP = 0x08,
MV_PHY_CONTROL1 = 0x10,
MV_PHY_STATUS1 = 0x11,
MV_PHY_INTR_EN = 0x12,
};
/* Port Registers */
enum {
MV_PORT_STATUS = 0x00,
MV_PORT_PHYS_CONTROL = 0x01,
MV_PORT_IDENT = 0x03,
MV_PORT_CONTROL = 0x04,
MV_PORT_VLANMAP = 0x06,
MV_PORT_ASSOC = 0x0b,
MV_PORT_RXCOUNT = 0x10,
MV_PORT_TXCOUNT = 0x11,
};
#define SMIBUSY (1<<15)
#define SMIMODE22 (1<<12)
#define SMIOP_READ (2<<10)
#define SMIOP_WRITE (1<<10)
#define DEVADDR 5
#define REGADDR 0
#define MV_IDENT_MASK 0x0000fff0
#define MV_IDENT_VALUE 0x00001760
#endif /* _GW16083_H_ */