openwrtv3/package/network/services/dnsmasq/files/dnsmasq.init

856 lines
21 KiB
Text
Raw Normal View History

#!/bin/sh /etc/rc.common
# Copyright (C) 2007-2012 OpenWrt.org
START=19
USE_PROCD=1
PROG=/usr/sbin/dnsmasq
ADD_LOCAL_DOMAIN=1
ADD_LOCAL_HOSTNAME=1
BASECONFIGFILE="/var/etc/dnsmasq.conf"
BASEHOSTFILE="/tmp/hosts/dhcp"
BASETIMESTAMPFILE="/etc/dnsmasq.time"
TRUSTANCHORSFILE="/usr/share/dnsmasq/trust-anchors.conf"
dnsmasq: dnssec time handling uses ntpd hotplug Change dnsmasq's dnssec time check handling to use time validity indicated by ntpd rather than maintaining a cross boot/upgrade /etc/dnsmasq.time timestamp file. This saves flash device wear. If ntpd client is configured in uci and you're using dnssec, then dnsmasq will not check dnssec timestamp validity until ntpd hotplug indicates sync via a stratum change. The ntpd hotplug leaves a status flag file to indicate to dnsmasq.init that time is valid and that it should now start in 'check dnssec timestamp valid' mode. If ntpd client is not configured and you're using dnssec, then it is presumed you're using an alternate time sync mechanism and that time is correct, thus dnsmasq checks dnssec timestamps are valid from 1st start. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> V2 - stratum & step ntp changes indicate time is valid V3 - on initial flag file step signal dnsmasq with SIGHUP if running V4 - only accept step ntp changes. Accepting both stratum & step could result in unpleasant script race conditions V5 - Actually only accepting stratum is the correct thing to do after further testing V6 - improve handling of non busybox ntpd if sysntpd not executable dnsmasq checks dnssec timestamps else sysntp script disabled - look for timestamp file - allows external mechanism to use hotplug flag file sysntp script enabled & uci ntp enabled - look for timestamp file sysntp script enabled & uci ntp disabled - dnsmasq checks dnssec timestamps fi
2016-06-14 10:00:21 +00:00
TIMEVALIDFILE="/var/state/dnsmasqsec"
BASEDHCPSTAMPFILE="/var/run/dnsmasq"
xappend() {
local value="$1"
echo "${value#--}" >> $CONFIGFILE_TMP
}
hex_to_hostid() {
local var="$1"
local hex="${2#0x}" # strip optional "0x" prefix
if [ -n "${hex//[0-9a-fA-F]/}" ]; then
# is invalid hex literal
return 1
fi
# convert into host id
export "$var=$(
printf "%0x:%0x" \
$(((0x$hex >> 16) % 65536)) \
$(( 0x$hex % 65536))
)"
return 0
}
dhcp_calc() {
local ip="$1"
local res=0
while [ -n "$ip" ]; do
part="${ip%%.*}"
res="$(($res * 256))"
res="$(($res + $part))"
[ "${ip%.*}" != "$ip" ] && ip="${ip#*.}" || ip=
done
echo "$res"
}
dhcp_check() {
local ifname="$1"
local stamp="${BASEDHCPSTAMPFILE_CFG}.${ifname}.dhcp"
local rv=0
[ -s "$stamp" ] && return $(cat "$stamp")
# If there's no carrier yet, skip this interface.
# The init script will be called again once the link is up
case "$(devstatus "$ifname" | jsonfilter -e @.carrier)" in
false) return 1;;
esac
udhcpc -n -q -s /bin/true -t 1 -i "$ifname" >&- && rv=1 || rv=0
[ $rv -eq 1 ] && \
logger -t dnsmasq \
"found already running DHCP-server on interface '$ifname'" \
"refusing to start, use 'option force 1' to override"
echo $rv > "$stamp"
return $rv
}
log_once() {
pidof dnsmasq >/dev/null || \
logger -t dnsmasq "$@"
}
append_bool() {
local section="$1"
local option="$2"
local value="$3"
local _loctmp
config_get_bool _loctmp "$section" "$option" 0
[ $_loctmp -gt 0 ] && xappend "$value"
}
append_parm() {
local section="$1"
local option="$2"
local switch="$3"
local default="$4"
local _loctmp
config_get _loctmp "$section" "$option" "$default"
[ -z "$_loctmp" ] && return 0
xappend "$switch=$_loctmp"
}
append_server() {
xappend "--server=$1"
}
append_address() {
xappend "--address=$1"
}
append_ipset() {
xappend "--ipset=$1"
}
append_interface() {
network_get_device ifname "$1" || return
xappend "--interface=$ifname"
}
append_notinterface() {
network_get_device ifname "$1" || return
xappend "--except-interface=$ifname"
}
append_addnhosts() {
xappend "--addn-hosts=$1"
}
append_bogusnxdomain() {
xappend "--bogus-nxdomain=$1"
}
append_pxe_service() {
xappend "--pxe-service=$1"
}
filter_dnsmasq() {
local cfg="$1" func="$2" match_cfg="$3" found_cfg
# use entry when no instance entry set, or if it matches
config_get found_cfg "$cfg" "instance"
if [ -z "$found_cfg" -o "$found_cfg" = "$match_cfg" ]; then
$func $cfg
fi
}
dhcp_subscrid_add() {
local cfg="$1"
config_get networkid "$cfg" networkid
[ -n "$networkid" ] || return 0
config_get subscriberid "$cfg" subscriberid
[ -n "$subscriberid" ] || return 0
xappend "--dhcp-subscrid=$networkid,$subscriberid"
config_get_bool force "$cfg" force 0
dhcp_option_add "$cfg" "$networkid" "$force"
}
dhcp_remoteid_add() {
local cfg="$1"
config_get networkid "$cfg" networkid
[ -n "$networkid" ] || return 0
config_get remoteid "$cfg" remoteid
[ -n "$remoteid" ] || return 0
xappend "--dhcp-remoteid=$networkid,$remoteid"
config_get_bool force "$cfg" force 0
dhcp_option_add "$cfg" "$networkid" "$force"
}
dhcp_circuitid_add() {
local cfg="$1"
config_get networkid "$cfg" networkid
[ -n "$networkid" ] || return 0
config_get circuitid "$cfg" circuitid
[ -n "$circuitid" ] || return 0
xappend "--dhcp-circuitid=$networkid,$circuitid"
config_get_bool force "$cfg" force 0
dhcp_option_add "$cfg" "$networkid" "$force"
}
dhcp_userclass_add() {
local cfg="$1"
config_get networkid "$cfg" networkid
[ -n "$networkid" ] || return 0
config_get userclass "$cfg" userclass
[ -n "$userclass" ] || return 0
xappend "--dhcp-userclass=$networkid,$userclass"
config_get_bool force "$cfg" force 0
dhcp_option_add "$cfg" "$networkid" "$force"
}
dhcp_vendorclass_add() {
local cfg="$1"
config_get networkid "$cfg" networkid
[ -n "$networkid" ] || return 0
config_get vendorclass "$cfg" vendorclass
[ -n "$vendorclass" ] || return 0
xappend "--dhcp-vendorclass=$networkid,$vendorclass"
config_get_bool force "$cfg" force 0
dhcp_option_add "$cfg" "$networkid" "$force"
}
dhcp_match_add() {
local cfg="$1"
config_get networkid "$cfg" networkid
[ -n "$networkid" ] || return 0
config_get match "$cfg" match
[ -n "$match" ] || return 0
xappend "--dhcp-match=$networkid,$match"
config_get_bool force "$cfg" force 0
dhcp_option_add "$cfg" "$networkid" "$force"
}
dhcp_host_add() {
local cfg="$1"
config_get_bool force "$cfg" force 0
config_get networkid "$cfg" networkid
[ -n "$networkid" ] && dhcp_option_add "$cfg" "$networkid" "$force"
config_get_bool enable "$cfg" enable 1
[ "$enable" = "0" ] && return 0
config_get name "$cfg" name
config_get ip "$cfg" ip
[ -n "$ip" -o -n "$name" ] || return 0
config_get_bool dns "$cfg" dns 0
[ "$dns" = "1" -a -n "$ip" -a -n "$name" ] && {
echo "$ip $name${DOMAIN:+.$DOMAIN}" >> $HOSTFILE
}
config_get mac "$cfg" mac
if [ -n "$mac" ]; then
# --dhcp-host=00:20:e0:3b:13:af,192.168.0.199,lap
macs=""
for m in $mac; do append macs "$m" ","; done
else
# --dhcp-host=lap,192.168.0.199
[ -n "$name" ] || return 0
macs="$name"
name=""
fi
config_get tag "$cfg" tag
if [ "$DHCPv6CAPABLE" -eq 1 ]; then
config_get duid "$cfg" duid
config_get hostid "$cfg" hostid
if [ -n "$hostid" ]; then
hex_to_hostid hostid "$hostid"
fi
fi
config_get_bool broadcast "$cfg" broadcast 0
[ "$broadcast" = "0" ] && broadcast=
config_get leasetime "$cfg" leasetime
xappend "--dhcp-host=$macs${duid:+,id:$duid}${networkid:+,net:$networkid}${broadcast:+,set:needs-broadcast}${tag:+,set:$tag}${ip:+,$ip${hostid:+,[::$hostid]}}${name:+,$name}${leasetime:+,$leasetime}"
}
dhcp_tag_add() {
local cfg="$1"
tag="$cfg"
[ -n "$tag" ] || return 0
config_get_bool force "$cfg" force 0
[ "$force" = "0" ] && force=
config_get option "$cfg" dhcp_option
for o in $option; do
xappend "--dhcp-option${force:+-force}=tag:$tag,$o"
done
}
dhcp_mac_add() {
local cfg="$1"
config_get networkid "$cfg" networkid
[ -n "$networkid" ] || return 0
config_get mac "$cfg" mac
[ -n "$mac" ] || return 0
xappend "--dhcp-mac=$networkid,$mac"
dhcp_option_add "$cfg" "$networkid"
}
dhcp_boot_add() {
local cfg="$1"
config_get networkid "$cfg" networkid
config_get filename "$cfg" filename
[ -n "$filename" ] || return 0
config_get servername "$cfg" servername
config_get serveraddress "$cfg" serveraddress
[ -n "$serveraddress" -a ! -n "$servername" ] && return 0
xappend "--dhcp-boot=${networkid:+net:$networkid,}${filename}${servername:+,$servername}${serveraddress:+,$serveraddress}"
config_get_bool force "$cfg" force 0
dhcp_option_add "$cfg" "$networkid" "$force"
}
dhcp_add() {
local cfg="$1"
config_get net "$cfg" interface
[ -n "$net" ] || return 0
config_get dhcpv4 "$cfg" dhcpv4
[ "$dhcpv4" != "disabled" ] || return 0
config_get networkid "$cfg" networkid
[ -n "$networkid" ] || networkid="$net"
network_get_subnet subnet "$net" || return 0
network_get_device ifname "$net" || return 0
network_get_protocol proto "$net" || return 0
[ "$cachelocal" = "0" ] && network_get_dnsserver dnsserver "$net" && {
DNS_SERVERS="$DNS_SERVERS $dnsserver"
}
Revert "dnsmasq: change 'add_local_hostname' to use dnsmasq '--interface-name'" This causes problem when a FQDN is configured in /etc/config/system. The domain name will appear twice in reverse DNS. Next to that, there seems to be a bug in dnsmasq. From the manual page: --interface-name=<name>,<interface>[/4|/6] Return a DNS record associating the name with the primary address on the given interface. This flag specifies an A or AAAA record for the given name in the same way as an /etc/hosts line, except that the address is not constant, but taken from the given interface. The interface may be followed by "/4" or "/6" to specify that only IPv4 or IPv6 addresses of the interface should be used. If the interface is down, not configured or non-existent, an empty record is returned. The matching PTR record is also created, mapping the interface address to the name. More than one name may be associated with an interface address by repeating the flag; in that case the first instance is used for the reverse address-to-name mapping. It does not just create an A/AAAA record for the primary address, it creates one for all addresses. And what is worse, it seems to actually resolve to the non-primary address first. This is quite annoying when you use floating IP addresses (e.g. VRRP), because when the floating IP is on the other device, SSH failes due to incorrect entry in the known hosts file. I know that this is not a common setup, but it would be nice if there was an option to restore the previous behaviour, rather than just forcing this new feature on everybody. Reported-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-01-12 09:17:48 +00:00
append_bool "$cfg" ignore "--no-dhcp-interface=$ifname" && return 0
# Do not support non-static interfaces for now
[ static = "$proto" ] || return 0
# Override interface netmask with dhcp config if applicable
config_get netmask "$cfg" netmask "${subnet##*/}"
#check for an already active dhcp server on the interface, unless 'force' is set
config_get_bool force "$cfg" force 0
[ $force -gt 0 ] || dhcp_check "$ifname" || return 0
config_get start "$cfg" start
config_get limit "$cfg" limit
config_get leasetime "$cfg" leasetime
config_get options "$cfg" options
config_get_bool dynamicdhcp "$cfg" dynamicdhcp 1
leasetime="${leasetime:-12h}"
start="$(dhcp_calc "${start:-100}")"
2010-03-18 15:50:05 +00:00
limit="${limit:-150}"
[ "$limit" -gt 0 ] && limit=$((limit-1))
eval "$(ipcalc.sh "${subnet%%/*}" $netmask $start $limit)"
if [ "$dynamicdhcp" = "0" ]; then END="static"; fi
xappend "--dhcp-range=$networkid,$START,$END,$NETMASK,$leasetime${options:+ $options}"
dhcp_option_add "$cfg" "$networkid"
}
dhcp_option_add() {
local cfg="$1"
local networkid="$2"
local force="$3"
[ "$force" = "0" ] && force=
config_get dhcp_option "$cfg" dhcp_option
for o in $dhcp_option; do
xappend "--dhcp-option${force:+-force}=${networkid:+$networkid,}$o"
done
}
dhcp_domain_add() {
local cfg="$1"
local ip name names record
config_get names "$cfg" name "$2"
[ -n "$names" ] || return 0
config_get ip "$cfg" ip "$3"
[ -n "$ip" ] || return 0
for name in $names; do
record="${record:+$record }$name"
done
echo "$ip $record" >> $HOSTFILE
}
dhcp_srv_add() {
local cfg="$1"
config_get srv "$cfg" srv
[ -n "$srv" ] || return 0
config_get target "$cfg" target
[ -n "$target" ] || return 0
config_get port "$cfg" port
[ -n "$port" ] || return 0
config_get class "$cfg" class
config_get weight "$cfg" weight
local service="$srv,$target,$port${class:+,$class${weight:+,$weight}}"
xappend "--srv-host=$service"
}
dhcp_mx_add() {
local cfg="$1"
local domain relay pref
config_get domain "$cfg" domain
[ -n "$domain" ] || return 0
config_get relay "$cfg" relay
[ -n "$relay" ] || return 0
config_get pref "$cfg" pref 0
local service="$domain,$relay,$pref"
xappend "--mx-host=$service"
}
2011-10-20 12:12:26 +00:00
dhcp_cname_add() {
local cfg="$1"
local cname target
config_get cname "$cfg" cname
[ -n "$cname" ] || return 0
config_get target "$cfg" target
[ -n "$target" ] || return 0
xappend "--cname=${cname},${target}"
2011-10-20 12:12:26 +00:00
}
dhcp_hostrecord_add() {
local cfg="$1"
local names addresses record val
config_get names "$cfg" name "$2"
if [ -z "$names" ]; then
return 0
fi
config_get addresses "$cfg" ip "$3"
if [ -z "$addresses" ]; then
return 0
fi
for val in $names $addresses; do
record="${record:+$record,}$val"
done
xappend "--host-record=$record"
}
dhcp_relay_add() {
local cfg="$1"
local local_addr server_addr interface
config_get local_addr "$cfg" local_addr
[ -n "$local_addr" ] || return 0
config_get server_addr "$cfg" server_addr
[ -n "$server_addr" ] || return 0
config_get interface "$cfg" interface
if [ -z "$interface" ]; then
xappend "--dhcp-relay=$local_addr,$server_addr"
else
xappend "--dhcp-relay=$local_addr,$server_addr,$interface"
fi
}
dnsmasq_start()
{
local cfg="$1" disabled
config_get_bool disabled "$cfg" disabled 0
[ "$disabled" -gt 0 ] && return 0
# reset list of DOMAINS and DNS servers (for each dnsmasq instance)
DNS_SERVERS=""
DOMAIN=""
CONFIGFILE="${BASECONFIGFILE}.${cfg}"
CONFIGFILE_TMP="${CONFIGFILE}.$$"
HOSTFILE="${BASEHOSTFILE}.${cfg}"
TIMESTAMPFILE="${BASETIMESTAMPFILE}.${cfg}"
BASEDHCPSTAMPFILE_CFG="${BASEDHCPSTAMPFILE}.${cfg}"
# before we can call xappend
mkdir -p /var/run/dnsmasq/
mkdir -p $(dirname $CONFIGFILE)
mkdir -p $(dirname $HOSTFILE)
mkdir -p /var/lib/misc
chown dnsmasq:dnsmasq /var/run/dnsmasq
dnsmasq: dnssec time handling uses ntpd hotplug Change dnsmasq's dnssec time check handling to use time validity indicated by ntpd rather than maintaining a cross boot/upgrade /etc/dnsmasq.time timestamp file. This saves flash device wear. If ntpd client is configured in uci and you're using dnssec, then dnsmasq will not check dnssec timestamp validity until ntpd hotplug indicates sync via a stratum change. The ntpd hotplug leaves a status flag file to indicate to dnsmasq.init that time is valid and that it should now start in 'check dnssec timestamp valid' mode. If ntpd client is not configured and you're using dnssec, then it is presumed you're using an alternate time sync mechanism and that time is correct, thus dnsmasq checks dnssec timestamps are valid from 1st start. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> V2 - stratum & step ntp changes indicate time is valid V3 - on initial flag file step signal dnsmasq with SIGHUP if running V4 - only accept step ntp changes. Accepting both stratum & step could result in unpleasant script race conditions V5 - Actually only accepting stratum is the correct thing to do after further testing V6 - improve handling of non busybox ntpd if sysntpd not executable dnsmasq checks dnssec timestamps else sysntp script disabled - look for timestamp file - allows external mechanism to use hotplug flag file sysntp script enabled & uci ntp enabled - look for timestamp file sysntp script enabled & uci ntp disabled - dnsmasq checks dnssec timestamps fi
2016-06-14 10:00:21 +00:00
[ -f "$TIMESTAMPFILE" ] && rm -f "$TIMESTAMPFILE"
echo "# auto-generated config file from /etc/config/dhcp" > $CONFIGFILE_TMP
echo "# auto-generated config file from /etc/config/dhcp" > $HOSTFILE
# if we did this last, we could override auto-generated config
[ -f /etc/dnsmasq.conf ] && {
xappend "--conf-file=/etc/dnsmasq.conf"
}
$PROG --version | grep -osqE "^Compile time options:.* DHCPv6( |$)" && DHCPv6CAPABLE=1 || DHCPv6CAPABLE=0
append_bool "$cfg" authoritative "--dhcp-authoritative"
append_bool "$cfg" nodaemon "--no-daemon"
append_bool "$cfg" domainneeded "--domain-needed"
append_bool "$cfg" filterwin2k "--filterwin2k"
append_bool "$cfg" nohosts "--no-hosts"
append_bool "$cfg" nonegcache "--no-negcache"
append_bool "$cfg" strictorder "--strict-order"
append_bool "$cfg" logqueries "--log-queries=extra"
append_bool "$cfg" noresolv "--no-resolv"
append_bool "$cfg" localise_queries "--localise-queries"
append_bool "$cfg" readethers "--read-ethers"
append_bool "$cfg" dbus "--enable-dbus"
append_bool "$cfg" boguspriv "--bogus-priv"
append_bool "$cfg" expandhosts "--expand-hosts"
config_get tftp_root "$cfg" "tftp_root"
[ -d "$tftp_root" ] && append_bool "$cfg" enable_tftp "--enable-tftp"
append_bool "$cfg" tftp_no_fail "--tftp-no-fail"
append_bool "$cfg" nonwildcard "--bind-dynamic"
append_bool "$cfg" fqdn "--dhcp-fqdn"
append_bool "$cfg" proxydnssec "--proxy-dnssec"
append_bool "$cfg" localservice "--local-service"
append_bool "$cfg" logdhcp "--log-dhcp"
append_bool "$cfg" quietdhcp "--quiet-dhcp"
append_bool "$cfg" sequential_ip "--dhcp-sequential-ip"
append_bool "$cfg" allservers "--all-servers"
append_bool "$cfg" noping "--no-ping"
append_parm "$cfg" logfacility "--log-facility"
append_parm "$cfg" dhcpscript "--dhcp-script"
append_parm "$cfg" cachesize "--cache-size"
append_parm "$cfg" dnsforwardmax "--dns-forward-max"
append_parm "$cfg" port "--port"
append_parm "$cfg" ednspacket_max "--edns-packet-max"
append_parm "$cfg" dhcpleasemax "--dhcp-lease-max"
append_parm "$cfg" "queryport" "--query-port"
append_parm "$cfg" "minport" "--min-port"
append_parm "$cfg" "maxport" "--max-port"
append_parm "$cfg" "domain" "--domain"
append_parm "$cfg" "local" "--server"
config_list_foreach "$cfg" "server" append_server
config_list_foreach "$cfg" "address" append_address
config_list_foreach "$cfg" "ipset" append_ipset
config_list_foreach "$cfg" "interface" append_interface
config_list_foreach "$cfg" "notinterface" append_notinterface
config_list_foreach "$cfg" "addnhosts" append_addnhosts
config_list_foreach "$cfg" "bogusnxdomain" append_bogusnxdomain
append_parm "$cfg" "leasefile" "--dhcp-leasefile" "/tmp/dhcp.leases"
append_parm "$cfg" "resolvfile" "--resolv-file" "/tmp/resolv.conf.auto"
append_parm "$cfg" "serversfile" "--servers-file"
append_parm "$cfg" "tftp_root" "--tftp-root"
append_parm "$cfg" "dhcp_boot" "--dhcp-boot"
append_parm "$cfg" "local_ttl" "--local-ttl"
append_parm "$cfg" "pxe_prompt" "--pxe-prompt"
config_list_foreach "$cfg" "pxe_service" append_pxe_service
config_get DOMAIN "$cfg" domain
config_get_bool ADD_LOCAL_DOMAIN "$cfg" add_local_domain 1
config_get_bool ADD_LOCAL_HOSTNAME "$cfg" add_local_hostname 1
config_get_bool readethers "$cfg" readethers
[ "$readethers" = "1" -a \! -e "/etc/ethers" ] && touch /etc/ethers
config_get resolvfile $cfg resolvfile
config_get dhcpscript $cfg dhcpscript
config_get leasefile $cfg leasefile "/tmp/dhcp.leases"
[ -n "$leasefile" -a \! -e "$leasefile" ] && touch "$leasefile"
config_get_bool cachelocal "$cfg" cachelocal 1
config_get_bool noresolv "$cfg" noresolv 0
if [ "$noresolv" != "1" ]; then
config_get resolvfile "$cfg" resolvfile "/tmp/resolv.conf.auto"
# So jail doesn't complain if file missing
[ -n "$resolvfile" -a \! -e "$resolvfile" ] && touch "$resolvfile"
fi
config_get hostsfile "$cfg" dhcphostsfile
[ -e "$hostsfile" ] && xappend "--dhcp-hostsfile=$hostsfile"
local rebind
config_get_bool rebind "$cfg" rebind_protection 1
[ $rebind -gt 0 ] && {
log_once \
"DNS rebinding protection is active," \
"will discard upstream RFC1918 responses!"
xappend "--stop-dns-rebind"
local rebind_localhost
config_get_bool rebind_localhost "$cfg" rebind_localhost 0
[ $rebind_localhost -gt 0 ] && {
log_once "Allowing 127.0.0.0/8 responses"
xappend "--rebind-localhost-ok"
}
append_rebind_domain() {
log_once "Allowing RFC1918 responses for domain $1"
xappend "--rebind-domain-ok=$1"
}
config_list_foreach "$cfg" rebind_domain append_rebind_domain
}
config_get_bool dnssec "$cfg" dnssec 0
[ "$dnssec" -gt 0 ] && {
xappend "--conf-file=$TRUSTANCHORSFILE"
xappend "--dnssec"
[ -x /etc/init.d/sysntpd ] && {
/etc/init.d/sysntpd enabled
[ "$?" -ne 0 -o "$(uci_get system.ntp.enabled)" = "1" ] && {
[ -f "$TIMEVALIDFILE" ] || xappend "--dnssec-no-timecheck"
}
}
append_bool "$cfg" dnsseccheckunsigned "--dnssec-check-unsigned"
}
config_get addmac "$cfg" addmac 0
[ "$addmac" != "0" ] && {
[ "$addmac" = "1" ] && addmac=
xappend "--add-mac${addmac:+="$addmac"}"
}
dhcp_option_add "$cfg" "" 0
xappend "--dhcp-broadcast=tag:needs-broadcast"
xappend "--addn-hosts=$(dirname $HOSTFILE)"
config_get dnsmasqconfdir "$cfg" confdir "/tmp/dnsmasq.d"
[ ! -d "$dnsmasqconfdir" ] && mkdir -p $dnsmasqconfdir
xappend "--conf-dir=$dnsmasqconfdir"
xappend "--user=dnsmasq"
xappend "--group=dnsmasq"
echo >> $CONFIGFILE_TMP
config_get_bool enable_tftp "$cfg" enable_tftp 0
[ "$enable_tftp" -gt 0 ] && {
config_get tftp_root "$cfg" tftp_root
append EXTRA_MOUNT $tftp_root
}
config_foreach filter_dnsmasq host dhcp_host_add "$cfg"
echo >> $CONFIGFILE_TMP
config_foreach filter_dnsmasq boot dhcp_boot_add "$cfg"
config_foreach filter_dnsmasq mac dhcp_mac_add "$cfg"
config_foreach filter_dnsmasq tag dhcp_tag_add "$cfg"
config_foreach filter_dnsmasq vendorclass dhcp_vendorclass_add "$cfg"
config_foreach filter_dnsmasq userclass dhcp_userclass_add "$cfg"
config_foreach filter_dnsmasq circuitid dhcp_circuitid_add "$cfg"
config_foreach filter_dnsmasq remoteid dhcp_remoteid_add "$cfg"
config_foreach filter_dnsmasq subscrid dhcp_subscrid_add "$cfg"
config_foreach filter_dnsmasq match dhcp_match_add "$cfg"
config_foreach filter_dnsmasq domain dhcp_domain_add "$cfg"
config_foreach filter_dnsmasq hostrecord dhcp_hostrecord_add "$cfg"
config_foreach filter_dnsmasq relay dhcp_relay_add "$cfg"
Revert "dnsmasq: change 'add_local_hostname' to use dnsmasq '--interface-name'" This causes problem when a FQDN is configured in /etc/config/system. The domain name will appear twice in reverse DNS. Next to that, there seems to be a bug in dnsmasq. From the manual page: --interface-name=<name>,<interface>[/4|/6] Return a DNS record associating the name with the primary address on the given interface. This flag specifies an A or AAAA record for the given name in the same way as an /etc/hosts line, except that the address is not constant, but taken from the given interface. The interface may be followed by "/4" or "/6" to specify that only IPv4 or IPv6 addresses of the interface should be used. If the interface is down, not configured or non-existent, an empty record is returned. The matching PTR record is also created, mapping the interface address to the name. More than one name may be associated with an interface address by repeating the flag; in that case the first instance is used for the reverse address-to-name mapping. It does not just create an A/AAAA record for the primary address, it creates one for all addresses. And what is worse, it seems to actually resolve to the non-primary address first. This is quite annoying when you use floating IP addresses (e.g. VRRP), because when the floating IP is on the other device, SSH failes due to incorrect entry in the known hosts file. I know that this is not a common setup, but it would be nice if there was an option to restore the previous behaviour, rather than just forcing this new feature on everybody. Reported-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-01-12 09:17:48 +00:00
# add own hostname
[ $ADD_LOCAL_HOSTNAME -eq 1 ] && {
local lanaddr lanaddr6
local ulaprefix="$(uci_get network @globals[0] ula_prefix)"
local hostname="$(uci_get system @system[0] hostname Lede)"
network_get_ipaddr lanaddr "lan" && {
dhcp_domain_add "" "$hostname" "$lanaddr"
}
[ -n "$ulaprefix" ] && network_get_ipaddrs6 lanaddr6 "lan" && {
for lanaddr6 in $lanaddr6; do
case "$lanaddr6" in
"${ulaprefix%%:/*}"*)
dhcp_domain_add "" "$hostname" "$lanaddr6"
;;
esac
done
}
}
echo >> $CONFIGFILE_TMP
config_foreach filter_dnsmasq srvhost dhcp_srv_add "$cfg"
config_foreach filter_dnsmasq mxhost dhcp_mx_add "$cfg"
echo >> $CONFIGFILE_TMP
config_get odhcpd_is_active odhcpd maindhcp
if [ "$odhcpd_is_active" != "1" ]; then
config_foreach filter_dnsmasq dhcp dhcp_add "$cfg"
fi
echo >> $CONFIGFILE_TMP
config_foreach filter_dnsmasq cname dhcp_cname_add "$cfg"
echo >> $CONFIGFILE_TMP
echo >> $CONFIGFILE_TMP
mv -f $CONFIGFILE_TMP $CONFIGFILE
[ "$resolvfile" = "/tmp/resolv.conf.auto" ] && {
rm -f /tmp/resolv.conf
[ $ADD_LOCAL_DOMAIN -eq 1 ] && [ -n "$DOMAIN" ] && {
echo "search $DOMAIN" >> /tmp/resolv.conf
}
DNS_SERVERS="$DNS_SERVERS 127.0.0.1"
for DNS_SERVER in $DNS_SERVERS ; do
echo "nameserver $DNS_SERVER" >> /tmp/resolv.conf
done
}
procd_open_instance $cfg
procd_set_param command $PROG -C $CONFIGFILE -k -x /var/run/dnsmasq/dnsmasq."${cfg}".pid
procd_set_param file $CONFIGFILE
procd_set_param respawn
local dnsmasqconffile="/etc/dnsmasq.${cfg}.conf"
if [ ! -r "$dnsmasqconffile" ]; then
dnsmasqconffile=/etc/dnsmasq.conf
fi
procd_add_jail dnsmasq ubus log
procd_add_jail_mount $CONFIGFILE $TRUSTANCHORSFILE $HOSTFILE /etc/passwd /etc/group /etc/TZ /dev/null /dev/urandom $dnsmasqconffile $dnsmasqconfdir $resolvfile $dhcpscript /etc/hosts /etc/ethers $EXTRA_MOUNT
procd_add_jail_mount_rw /var/run/dnsmasq/ $leasefile
procd_close_instance
}
dnsmasq_stop()
{
local cfg="$1"
config_get resolvfile "$cfg" "resolvfile"
#relink /tmp/resolve.conf only for main instance
[ "$resolvfile" = "/tmp/resolv.conf.auto" ] && {
[ -f /tmp/resolv.conf ] && {
rm -f /tmp/resolv.conf
ln -s "$resolvfile" /tmp/resolv.conf
}
}
rm -f ${BASEDHCPSTAMPFILE}.${cfg}.*.dhcp
}
service_triggers()
{
procd_add_reload_trigger "dhcp"
procd_add_raw_trigger "interface.*" 2000 /etc/init.d/dnsmasq reload
}
boot()
{
BOOT=1
start "$@"
}
start_service() {
local instance="$1"
local instance_found=0
[ -n "$BOOT" ] && return
. /lib/functions/network.sh
config_cb() {
local type="$1"
local name="$2"
if [ "$type" = "dnsmasq" ]; then
if [ -n "$instance" -a "$instance" = "$name" ]; then
instance_found=1
fi
fi
}
config_load dhcp
if [ -n "$instance" ]; then
[ "$instance_found" -gt 0 ] || return
dnsmasq_start "$instance"
else
config_foreach dnsmasq_start dnsmasq
fi
}
reload_service() {
rc_procd start_service "$@"
return 0
}
stop_service() {
local instance="$1"
local instance_found=0
config_cb() {
local type="$1"
local name="$2"
if [ "$type" = "dnsmasq" ]; then
if [ -n "$instance" -a "$instance" = "$name" ]; then
instance_found=1
fi
fi
}
config_load dhcp
if [ -n "$instance" ]; then
[ "$instance_found" -gt 0 ] || return
dnsmasq_stop "$instance"
else
config_foreach dnsmasq_stop dnsmasq
fi
}