openwrtv3/target/linux/ramips/dts/WNCE2001.dts

150 lines
2.4 KiB
Text
Raw Normal View History

/dts-v1/;
#include "rt3050.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "netgear,wnce2001", "ralink,rt3052-soc";
model = "Netgear WNCE2001";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_green;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
led_power_green: power-green {
label = "wnce2001:green:power";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
power-red {
label = "wnce2001:red:power";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wlan-green {
label = "wnce2001:green:wlan";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
wlan-red {
label = "wnce2001:red:wlan";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
rt {
label = "rt";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
ap {
label = "ap";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
factory: partition@30000 {
label = "factory";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "config";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "language";
reg = <0x60000 0x30000>;
read-only;
};
partition@90000 {
label = "pot";
reg = <0x90000 0x10000>;
read-only;
};
partition@a0000 {
label = "checksum";
reg = <0xa0000 0x10000>;
};
partition@b0000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0xb0000 0x350000>;
};
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};