openwrtv3/target/linux/ipq806x/patches-4.9/0024-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch

From 0fba6eceb6e16fa8fd5834d65fcb771fa263a44b Mon Sep 17 00:00:00 2001
From: Matthew McClintock <mmcclint@codeaurora.org>
Date: Thu, 17 Mar 2016 16:22:28 -0500
Subject: [PATCH 24/69] qcom: ipq4019: add USB nodes to ipq4019 SoC device tree

This adds the SoC nodes to the ipq4019 device tree

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 67 +++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -313,5 +313,72 @@
 			compatible = "qcom,pshold";
 			reg = <0x4ab000 0x4>;
 		};
+
+                usb3_ss_phy: ssphy@9a000 {
+                        compatible = "qca,uni-ssphy";
+                        reg = <0x9a000 0x800>;
+                        reg-names = "phy_base";
+                        resets = <&gcc USB3_UNIPHY_PHY_ARES>;
+                        reset-names = "por_rst";
+                        status = "disabled";
+                };
+
+                usb3_hs_phy: hsphy@a6000 {
+                        compatible = "qca,baldur-usb3-hsphy";
+                        reg = <0xa6000 0x40>;
+                        reg-names = "phy_base";
+                        resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
+                        reset-names = "por_rst", "srif_rst";
+                        status = "disabled";
+                };
+
+		usb3@0 {
+                        compatible = "qcom,dwc3";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        clocks = <&gcc GCC_USB3_MASTER_CLK>;
+			clock-names = "core";
+                        ranges;
+                        status = "disabled";
+
+                        dwc3@8a00000 {
+                                compatible = "snps,dwc3";
+                                reg = <0x8a00000 0xf8000>;
+                                interrupts = <0 132 0>;
+                                usb-phy = <&usb3_hs_phy>, <&usb3_ss_phy>;
+                                phy-names = "usb2-phy", "usb3-phy";
+                                tx-fifo-resize;
+                                dr_mode = "host";
+                        };
+                };
+
+                usb2_hs_phy: hsphy@a8000 {
+                        compatible = "qca,baldur-usb2-hsphy";
+                        reg = <0xa8000 0x40>;
+                        reg-names = "phy_base";
+                        resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
+                        reset-names = "por_rst", "srif_rst";
+                        status = "disabled";
+                };
+
+                usb2@0 {
+                        compatible = "qcom,dwc3";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        clocks = <&gcc GCC_USB2_MASTER_CLK>;
+			clock-names = "core";
+                        ranges;
+                        status = "disabled";
+
+                        dwc3@6000000 {
+                                compatible = "snps,dwc3";
+                                reg = <0x6000000 0xf8000>;
+                                interrupts = <0 136 0>;
+                                usb-phy = <&usb2_hs_phy>;
+                                phy-names = "usb2-phy";
+                                tx-fifo-resize;
+                                dr_mode = "host";
+                        };
+                };
 	};
 };