openwrtv3/target/linux/generic/patches-3.7/132-solos-dma.patch

389 lines
12 KiB
Diff
Raw Normal View History

commit 152a2a8b5e1d4cbe91a7c66f1028db15164a3766
Author: David Woodhouse <David.Woodhouse@intel.com>
Date: Wed Dec 19 11:01:21 2012 +0000
solos-pci: ensure all TX packets are aligned to 4 bytes
The FPGA can't handled unaligned DMA (yet). So copy into an aligned buffer,
if skb->data isn't suitably aligned.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 13af816469db3449c072afbae6c4c1bd9ccecccb
Author: Nathan Williams <nathan@traverse.com.au>
Date: Wed Dec 19 11:01:20 2012 +0000
solos-pci: add firmware upgrade support for new models
Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 7fbdadb5e951e4f0c0fc991ff5f50295568786e6
Author: Nathan Williams <nathan@traverse.com.au>
Date: Wed Dec 19 11:01:19 2012 +0000
solos-pci: remove superfluous debug output
Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit f9baad02e7411d9f38d5ebe1a1cdcde4ceec100d
Author: Nathan Williams <nathan@traverse.com.au>
Date: Wed Dec 19 11:01:18 2012 +0000
solos-pci: add GPIO support for newer versions on Geos board
dwmw2: Tidy up a little, simpler matching on which GPIO is being accessed,
only register on newer boards, register under PCI device instead of
duplicating them under each ATM device.
Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
==
There is a typo here so we do a double lock instead of an unlock.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
Only needed in linux-next. Introduced in f9baad02e7411d9 [14/17]
solos-pci: add GPIO support for newer versions on Geos board
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -42,7 +42,8 @@
#include <linux/swab.h>
#include <linux/slab.h>
-#define VERSION "0.07"
+#define VERSION "1.04"
+#define DRIVER_VERSION 0x01
#define PTAG "solos-pci"
#define CONFIG_RAM_SIZE 128
@@ -56,16 +57,21 @@
#define FLASH_BUSY 0x60
#define FPGA_MODE 0x5C
#define FLASH_MODE 0x58
+#define GPIO_STATUS 0x54
+#define DRIVER_VER 0x50
#define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
#define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
#define DATA_RAM_SIZE 32768
#define BUF_SIZE 2048
#define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
-#define FPGA_PAGE 528 /* FPGA flash page size*/
-#define SOLOS_PAGE 512 /* Solos flash page size*/
-#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
-#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
+/* Old boards use ATMEL AD45DB161D flash */
+#define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
+#define ATMEL_SOLOS_PAGE 512 /* Solos flash page size*/
+#define ATMEL_FPGA_BLOCK (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
+#define ATMEL_SOLOS_BLOCK (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
+/* Current boards use M25P/M25PE SPI flash */
+#define SPI_FLASH_BLOCK (256 * 64)
#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
@@ -123,11 +129,14 @@ struct solos_card {
struct sk_buff_head cli_queue[4];
struct sk_buff *tx_skb[4];
struct sk_buff *rx_skb[4];
+ unsigned char *dma_bounce;
wait_queue_head_t param_wq;
wait_queue_head_t fw_wq;
int using_dma;
+ int dma_alignment;
int fpga_version;
int buffer_size;
+ int atmel_flash;
};
@@ -452,7 +461,6 @@ static ssize_t console_show(struct devic
len = skb->len;
memcpy(buf, skb->data, len);
- dev_dbg(&card->dev->dev, "len: %d\n", len);
kfree_skb(skb);
return len;
@@ -499,6 +507,78 @@ static ssize_t console_store(struct devi
return err?:count;
}
+struct geos_gpio_attr {
+ struct device_attribute attr;
+ int offset;
+};
+
+#define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset) \
+ struct geos_gpio_attr gpio_attr_##_name = { \
+ .attr = __ATTR(_name, _mode, _show, _store), \
+ .offset = _offset }
+
+static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+ struct solos_card *card = pci_get_drvdata(pdev);
+ uint32_t data32;
+
+ if (count != 1 && (count != 2 || buf[1] != '\n'))
+ return -EINVAL;
+
+ spin_lock_irq(&card->param_queue_lock);
+ data32 = ioread32(card->config_regs + GPIO_STATUS);
+ if (buf[0] == '1') {
+ data32 |= 1 << gattr->offset;
+ iowrite32(data32, card->config_regs + GPIO_STATUS);
+ } else if (buf[0] == '0') {
+ data32 &= ~(1 << gattr->offset);
+ iowrite32(data32, card->config_regs + GPIO_STATUS);
+ } else {
+ count = -EINVAL;
+ }
+ spin_unlock_irq(&card->param_queue_lock);
+ return count;
+}
+
+static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+ struct solos_card *card = pci_get_drvdata(pdev);
+ uint32_t data32;
+
+ data32 = ioread32(card->config_regs + GPIO_STATUS);
+ data32 = (data32 >> gattr->offset) & 1;
+
+ return sprintf(buf, "%d\n", data32);
+}
+
+static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+ struct solos_card *card = pci_get_drvdata(pdev);
+ uint32_t data32;
+
+ data32 = ioread32(card->config_regs + GPIO_STATUS);
+ switch (gattr->offset) {
+ case 0:
+ /* HardwareVersion */
+ data32 = data32 & 0x1F;
+ break;
+ case 1:
+ /* HardwareVariant */
+ data32 = (data32 >> 5) & 0x0F;
+ break;
+ }
+ return sprintf(buf, "%d\n", data32);
+}
+
static DEVICE_ATTR(console, 0644, console_show, console_store);
@@ -507,6 +587,14 @@ static DEVICE_ATTR(console, 0644, consol
#include "solos-attrlist.c"
+static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
+static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
+static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
+static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
+static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
+static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
+static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
+static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
#undef SOLOS_ATTR_RO
#undef SOLOS_ATTR_RW
@@ -523,6 +611,23 @@ static struct attribute_group solos_attr
.name = "parameters",
};
+static struct attribute *gpio_attrs[] = {
+ &gpio_attr_GPIO1.attr.attr,
+ &gpio_attr_GPIO2.attr.attr,
+ &gpio_attr_GPIO3.attr.attr,
+ &gpio_attr_GPIO4.attr.attr,
+ &gpio_attr_GPIO5.attr.attr,
+ &gpio_attr_PushButton.attr.attr,
+ &gpio_attr_HardwareVersion.attr.attr,
+ &gpio_attr_HardwareVariant.attr.attr,
+ NULL
+};
+
+static struct attribute_group gpio_attr_group = {
+ .attrs = gpio_attrs,
+ .name = "gpio",
+};
+
static int flash_upgrade(struct solos_card *card, int chip)
{
const struct firmware *fw;
@@ -534,16 +639,25 @@ static int flash_upgrade(struct solos_ca
switch (chip) {
case 0:
fw_name = "solos-FPGA.bin";
- blocksize = FPGA_BLOCK;
+ if (card->atmel_flash)
+ blocksize = ATMEL_FPGA_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
break;
case 1:
fw_name = "solos-Firmware.bin";
- blocksize = SOLOS_BLOCK;
+ if (card->atmel_flash)
+ blocksize = ATMEL_SOLOS_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
break;
case 2:
if (card->fpga_version > LEGACY_BUFFERS){
fw_name = "solos-db-FPGA.bin";
- blocksize = FPGA_BLOCK;
+ if (card->atmel_flash)
+ blocksize = ATMEL_FPGA_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
} else {
dev_info(&card->dev->dev, "FPGA version doesn't support"
" daughter board upgrades\n");
@@ -553,7 +667,10 @@ static int flash_upgrade(struct solos_ca
case 3:
if (card->fpga_version > LEGACY_BUFFERS){
fw_name = "solos-Firmware.bin";
- blocksize = SOLOS_BLOCK;
+ if (card->atmel_flash)
+ blocksize = ATMEL_SOLOS_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
} else {
dev_info(&card->dev->dev, "FPGA version doesn't support"
" daughter board upgrades\n");
@@ -569,6 +686,9 @@ static int flash_upgrade(struct solos_ca
dev_info(&card->dev->dev, "Flash upgrade starting\n");
+ /* New FPGAs require driver version before permitting flash upgrades */
+ iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
+
numblocks = fw->size / blocksize;
dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
@@ -598,9 +718,13 @@ static int flash_upgrade(struct solos_ca
/* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
- /* Copy block to buffer, swapping each 16 bits */
+ /* Copy block to buffer, swapping each 16 bits for Atmel flash */
for(i = 0; i < blocksize; i += 4) {
- uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
+ uint32_t word;
+ if (card->atmel_flash)
+ word = swahb32p((uint32_t *)(fw->data + offset + i));
+ else
+ word = *(uint32_t *)(fw->data + offset + i);
if(card->fpga_version > LEGACY_BUFFERS)
iowrite32(word, FLASH_BUF + i);
else
@@ -961,7 +1085,12 @@ static uint32_t fpga_tx(struct solos_car
tx_started |= 1 << port;
oldskb = skb; /* We're done with this skb already */
} else if (skb && card->using_dma) {
- SKB_CB(skb)->dma_addr = pci_map_single(card->dev, skb->data,
+ unsigned char *data = skb->data;
+ if ((unsigned long)data & card->dma_alignment) {
+ data = card->dma_bounce + (BUF_SIZE * port);
+ memcpy(data, skb->data, skb->len);
+ }
+ SKB_CB(skb)->dma_addr = pci_map_single(card->dev, data,
skb->len, PCI_DMA_TODEVICE);
card->tx_skb[port] = skb;
iowrite32(SKB_CB(skb)->dma_addr,
@@ -1135,18 +1264,33 @@ static int fpga_probe(struct pci_dev *de
db_fpga_upgrade = db_firmware_upgrade = 0;
}
+ /* Stopped using Atmel flash after 0.03-38 */
+ if (fpga_ver < 39)
+ card->atmel_flash = 1;
+ else
+ card->atmel_flash = 0;
+
+ data32 = ioread32(card->config_regs + PORTS);
+ card->nr_ports = (data32 & 0x000000FF);
+
if (card->fpga_version >= DMA_SUPPORTED) {
pci_set_master(dev);
card->using_dma = 1;
+ if (1) { /* All known FPGA versions so far */
+ card->dma_alignment = 3;
+ card->dma_bounce = kmalloc(card->nr_ports * BUF_SIZE, GFP_KERNEL);
+ if (!card->dma_bounce) {
+ dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
+ /* Fallback to MMIO doesn't work */
+ goto out_unmap_both;
+ }
+ }
} else {
card->using_dma = 0;
/* Set RX empty flag for all ports */
iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
}
- data32 = ioread32(card->config_regs + PORTS);
- card->nr_ports = (data32 & 0x000000FF);
-
pci_set_drvdata(dev, card);
tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
@@ -1181,6 +1325,10 @@ static int fpga_probe(struct pci_dev *de
if (err)
goto out_free_irq;
+ if (card->fpga_version >= DMA_SUPPORTED &&
+ sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
+ dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
+
return 0;
out_free_irq:
@@ -1189,6 +1337,7 @@ static int fpga_probe(struct pci_dev *de
tasklet_kill(&card->tlet);
out_unmap_both:
+ kfree(card->dma_bounce);
pci_set_drvdata(dev, NULL);
pci_iounmap(dev, card->buffers);
out_unmap_config:
@@ -1291,11 +1440,16 @@ static void fpga_remove(struct pci_dev *
iowrite32(1, card->config_regs + FPGA_MODE);
(void)ioread32(card->config_regs + FPGA_MODE);
+ if (card->fpga_version >= DMA_SUPPORTED)
+ sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
+
atm_remove(card);
free_irq(dev->irq, card);
tasklet_kill(&card->tlet);
+ kfree(card->dma_bounce);
+
/* Release device from reset */
iowrite32(0, card->config_regs + FPGA_MODE);
(void)ioread32(card->config_regs + FPGA_MODE);