openwrtv3/package/kernel/mac80211/patches/312-v4.16-0004-brcmfmac-Rename-replace-old-IO-functions-with-simple.patch

From 71bd508d7ded8c504ef05d1b4befecfe25e54cb1 Mon Sep 17 00:00:00 2001
From: Ian Molton <ian@mnementh.co.uk>
Date: Fri, 8 Dec 2017 13:10:29 +0100
Subject: [PATCH] brcmfmac: Rename / replace old IO functions with simpler
 ones.

Primarily this patch removes:

brcmf_sdiod_f0_writeb()
brcmf_sdiod_reg_write()
brcmf_sdiod_reg_read()

Since we no longer use the quirky method of deciding which function to
address via the address being accessed, take the opportunity to rename
some IO functions more in line with common kernel code. We also convert
those that map directly to sdio_{read,write}*() to macros.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 169 +++----------------
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 186 ++++++++++-----------
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.h    |  28 +++-
 3 files changed, 138 insertions(+), 245 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -137,27 +137,27 @@ int brcmf_sdiod_intr_register(struct brc
 		if (sdiodev->bus_if->chip == BRCM_CC_43362_CHIP_ID) {
 			/* assign GPIO to SDIO core */
 			addr = CORE_CC_REG(SI_ENUM_BASE, gpiocontrol);
-			gpiocontrol = brcmf_sdiod_regrl(sdiodev, addr, &ret);
+			gpiocontrol = brcmf_sdiod_readl(sdiodev, addr, &ret);
 			gpiocontrol |= 0x2;
-			brcmf_sdiod_regwl(sdiodev, addr, gpiocontrol, &ret);
+			brcmf_sdiod_writel(sdiodev, addr, gpiocontrol, &ret);
 
-			brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_SELECT, 0xf,
-					  &ret);
-			brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_OUT, 0, &ret);
-			brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_EN, 0x2, &ret);
+			brcmf_sdiod_writeb(sdiodev, SBSDIO_GPIO_SELECT,
+					   0xf, &ret);
+			brcmf_sdiod_writeb(sdiodev, SBSDIO_GPIO_OUT, 0, &ret);
+			brcmf_sdiod_writeb(sdiodev, SBSDIO_GPIO_EN, 0x2, &ret);
 		}
 
 		/* must configure SDIO_CCCR_IENx to enable irq */
-		data = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
+		data = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_IENx, &ret);
 		data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
-		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
+		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, data, &ret);
 
 		/* redirect, configure and enable io for interrupt signal */
 		data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
 		if (pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
 			data |= SDIO_SEPINT_ACT_HI;
-		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
-
+		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT,
+				     data, &ret);
 		sdio_release_host(sdiodev->func[1]);
 	} else {
 		brcmf_dbg(SDIO, "Entering\n");
@@ -183,8 +183,8 @@ void brcmf_sdiod_intr_unregister(struct
 
 		pdata = &sdiodev->settings->bus.sdio;
 		sdio_claim_host(sdiodev->func[1]);
-		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
-		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
+		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
+		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
 		sdio_release_host(sdiodev->func[1]);
 
 		sdiodev->oob_irq_requested = false;
@@ -242,8 +242,8 @@ static int brcmf_sdiod_set_sbaddr_window
 	addr = (address & SBSDIO_SBWINDOW_MASK) >> 8;
 
 	for (i = 0 ; i < 3 && !err ; i++, addr >>= 8)
-		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i,
-				  addr & 0xff, &err);
+		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i,
+				   addr & 0xff, &err);
 
 	return err;
 }
@@ -267,124 +267,15 @@ static int brcmf_sdiod_addrprep(struct b
 	return 0;
 }
 
-static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func, u8 byte,
-					uint regaddr)
-{
-	int err_ret;
-
-	/*
-	 * Can only directly write to some F0 registers.
-	 * Handle CCCR_IENx and CCCR_ABORT command
-	 * as a special case.
-	 */
-	if ((regaddr == SDIO_CCCR_ABORT) ||
-	    (regaddr == SDIO_CCCR_IENx))
-		sdio_writeb(func, byte, regaddr, &err_ret);
-	else
-		sdio_f0_writeb(func, byte, regaddr, &err_ret);
-
-	return err_ret;
-}
-
-static int brcmf_sdiod_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr,
-				 u8 regsz, void *data)
-{
-	int ret;
-
-	/*
-	 * figure out how to read the register based on address range
-	 * 0x00 ~ 0x7FF: function 0 CCCR and FBR
-	 * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
-	 * The rest: function 1 silicon backplane core registers
-	 * f0 writes must be bytewise
-	 */
-
-	if ((addr & ~REG_F0_REG_MASK) == 0) {
-		if (WARN_ON(regsz > 1))
-			return -EINVAL;
-		ret = brcmf_sdiod_f0_writeb(sdiodev->func[0],
-					    *(u8 *)data, addr);
-	} else {
-		switch (regsz) {
-		case 1:
-			sdio_writeb(sdiodev->func[1], *(u8 *)data, addr, &ret);
-			break;
-		case 4:
-			ret = brcmf_sdiod_addrprep(sdiodev, &addr);
-			if (ret)
-				goto done;
-
-			sdio_writel(sdiodev->func[1], *(u32 *)data, addr, &ret);
-			break;
-		default:
-			WARN(1, "Invalid reg size\n");
-			ret = -EINVAL;
-			break;
-		}
-	}
-
-done:
-	return ret;
-}
-
-static int brcmf_sdiod_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr,
-				u8 regsz, void *data)
-{
-	int ret;
-
-	/*
-	 * figure out how to read the register based on address range
-	 * 0x00 ~ 0x7FF: function 0 CCCR and FBR
-	 * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
-	 * The rest: function 1 silicon backplane core registers
-	 * f0 reads must be bytewise
-	 */
-	if ((addr & ~REG_F0_REG_MASK) == 0) {
-		if (WARN_ON(regsz > 1))
-			return -EINVAL;
-		*(u8 *)data = sdio_f0_readb(sdiodev->func[0], addr, &ret);
-	} else {
-		switch (regsz) {
-		case 1:
-			*(u8 *)data = sdio_readb(sdiodev->func[1], addr, &ret);
-			break;
-		case 4:
-			ret = brcmf_sdiod_addrprep(sdiodev, &addr);
-			if (ret)
-				goto done;
-
-			*(u32 *)data = sdio_readl(sdiodev->func[1], addr, &ret);
-			break;
-		default:
-			WARN(1, "Invalid reg size\n");
-			ret = -EINVAL;
-			break;
-		}
-	}
-
-done:
-	return ret;
-}
-
-u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
+u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 {
-	u8 data;
+	u32 data = 0;
 	int retval;
 
-	retval = brcmf_sdiod_reg_read(sdiodev, addr, 1, &data);
-
-	if (ret)
-		*ret = retval;
-
-	return data;
-}
+	retval = brcmf_sdiod_addrprep(sdiodev, &addr);
 
-u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
-{
-	u32 data;
-	int retval;
-
-	retval = brcmf_sdiod_reg_read(sdiodev, addr, 4, &data);
+	if (!retval)
+		data = sdio_readl(sdiodev->func[1], addr, &retval);
 
 	if (ret)
 		*ret = retval;
@@ -392,23 +283,15 @@ u32 brcmf_sdiod_regrl(struct brcmf_sdio_
 	return data;
 }
 
-void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
-		      u8 data, int *ret)
+void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr,
+			u32 data, int *ret)
 {
 	int retval;
 
-	retval = brcmf_sdiod_reg_write(sdiodev, addr, 1, &data);
-
-	if (ret)
-		*ret = retval;
-}
-
-void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
-		      u32 data, int *ret)
-{
-	int retval;
+	retval = brcmf_sdiod_addrprep(sdiodev, &addr);
 
-	retval = brcmf_sdiod_reg_write(sdiodev, addr, 4, &data);
+	if (!retval)
+		sdio_writel(sdiodev->func[1], data, addr, &retval);
 
 	if (ret)
 		*ret = retval;
@@ -846,8 +729,8 @@ int brcmf_sdiod_abort(struct brcmf_sdio_
 {
 	brcmf_dbg(SDIO, "Enter\n");
 
-	/* issue abort cmd52 command through F0 */
-	brcmf_sdiod_reg_write(sdiodev, SDIO_CCCR_ABORT, 1, &fn);
+	/* Issue abort cmd52 command through F0 */
+	brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_ABORT, fn, NULL);
 
 	brcmf_dbg(SDIO, "Exit\n");
 	return 0;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -669,7 +669,7 @@ static int r_sdreg32(struct brcmf_sdio *
 	int ret;
 
 	core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
-	*regvar = brcmf_sdiod_regrl(bus->sdiodev, core->base + offset, &ret);
+	*regvar = brcmf_sdiod_readl(bus->sdiodev, core->base + offset, &ret);
 
 	return ret;
 }
@@ -680,7 +680,7 @@ static int w_sdreg32(struct brcmf_sdio *
 	int ret;
 
 	core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
-	brcmf_sdiod_regwl(bus->sdiodev, core->base + reg_offset, regval, &ret);
+	brcmf_sdiod_writel(bus->sdiodev, core->base + reg_offset, regval, &ret);
 
 	return ret;
 }
@@ -697,8 +697,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio
 
 	wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 	/* 1st KSO write goes to AOS wake up core if device is asleep  */
-	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
-			  wr_val, &err);
+	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
 
 	if (on) {
 		/* device WAKEUP through KSO:
@@ -724,7 +723,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio
 		 * just one write attempt may fail,
 		 * read it back until it matches written value
 		 */
-		rd_val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+		rd_val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 					   &err);
 		if (!err) {
 			if ((rd_val & bmask) == cmp_val)
@@ -734,9 +733,11 @@ brcmf_sdio_kso_control(struct brcmf_sdio
 		/* bail out upon subsequent access errors */
 		if (err && (err_cnt++ > BRCMF_SDIO_MAX_ACCESS_ERRORS))
 			break;
+
 		udelay(KSO_WAIT_US);
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
-				  wr_val, &err);
+		brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val,
+				   &err);
+
 	} while (try_cnt++ < MAX_KSO_ATTEMPTS);
 
 	if (try_cnt > 2)
@@ -772,15 +773,15 @@ static int brcmf_sdio_htclk(struct brcmf
 		clkreq =
 		    bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
 
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				  clkreq, &err);
+		brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				   clkreq, &err);
 		if (err) {
 			brcmf_err("HT Avail request error: %d\n", err);
 			return -EBADE;
 		}
 
 		/* Check current status */
-		clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+		clkctl = brcmf_sdiod_readb(bus->sdiodev,
 					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
 		if (err) {
 			brcmf_err("HT Avail read error: %d\n", err);
@@ -790,35 +791,34 @@ static int brcmf_sdio_htclk(struct brcmf
 		/* Go to pending and await interrupt if appropriate */
 		if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
 			/* Allow only clock-available interrupt */
-			devctl = brcmf_sdiod_regrb(bus->sdiodev,
+			devctl = brcmf_sdiod_readb(bus->sdiodev,
 						   SBSDIO_DEVICE_CTL, &err);
 			if (err) {
-				brcmf_err("Devctl error setting CA: %d\n",
-					  err);
+				brcmf_err("Devctl error setting CA: %d\n", err);
 				return -EBADE;
 			}
 
 			devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					  devctl, &err);
+			brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					   devctl, &err);
 			brcmf_dbg(SDIO, "CLKCTL: set PENDING\n");
 			bus->clkstate = CLK_PENDING;
 
 			return 0;
 		} else if (bus->clkstate == CLK_PENDING) {
 			/* Cancel CA-only interrupt filter */
-			devctl = brcmf_sdiod_regrb(bus->sdiodev,
+			devctl = brcmf_sdiod_readb(bus->sdiodev,
 						   SBSDIO_DEVICE_CTL, &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					  devctl, &err);
+			brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					   devctl, &err);
 		}
 
 		/* Otherwise, wait here (polling) for HT Avail */
 		timeout = jiffies +
 			  msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000);
 		while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
-			clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+			clkctl = brcmf_sdiod_readb(bus->sdiodev,
 						   SBSDIO_FUNC1_CHIPCLKCSR,
 						   &err);
 			if (time_after(jiffies, timeout))
@@ -852,16 +852,16 @@ static int brcmf_sdio_htclk(struct brcmf
 
 		if (bus->clkstate == CLK_PENDING) {
 			/* Cancel CA-only interrupt filter */
-			devctl = brcmf_sdiod_regrb(bus->sdiodev,
+			devctl = brcmf_sdiod_readb(bus->sdiodev,
 						   SBSDIO_DEVICE_CTL, &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					  devctl, &err);
+			brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					   devctl, &err);
 		}
 
 		bus->clkstate = CLK_SDONLY;
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				  clkreq, &err);
+		brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				   clkreq, &err);
 		brcmf_dbg(SDIO, "CLKCTL: turned OFF\n");
 		if (err) {
 			brcmf_err("Failed access turning clock off: %d\n",
@@ -951,14 +951,14 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *
 
 		/* Going to sleep */
 		if (sleep) {
-			clkcsr = brcmf_sdiod_regrb(bus->sdiodev,
+			clkcsr = brcmf_sdiod_readb(bus->sdiodev,
 						   SBSDIO_FUNC1_CHIPCLKCSR,
 						   &err);
 			if ((clkcsr & SBSDIO_CSR_MASK) == 0) {
 				brcmf_dbg(SDIO, "no clock, set ALP\n");
-				brcmf_sdiod_regwb(bus->sdiodev,
-						  SBSDIO_FUNC1_CHIPCLKCSR,
-						  SBSDIO_ALP_AVAIL_REQ, &err);
+				brcmf_sdiod_writeb(bus->sdiodev,
+						   SBSDIO_FUNC1_CHIPCLKCSR,
+						   SBSDIO_ALP_AVAIL_REQ, &err);
 			}
 			err = brcmf_sdio_kso_control(bus, false);
 		} else {
@@ -1178,16 +1178,16 @@ static void brcmf_sdio_rxfail(struct brc
 	if (abort)
 		brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
 
-	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
-			  SFC_RF_TERM, &err);
+	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM,
+			   &err);
 	bus->sdcnt.f1regdata++;
 
 	/* Wait until the packet has been flushed (device/FIFO stable) */
 	for (lastrbc = retries = 0xffff; retries > 0; retries--) {
-		hi = brcmf_sdiod_regrb(bus->sdiodev,
-				       SBSDIO_FUNC1_RFRAMEBCHI, &err);
-		lo = brcmf_sdiod_regrb(bus->sdiodev,
-				       SBSDIO_FUNC1_RFRAMEBCLO, &err);
+		hi = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCHI,
+				       &err);
+		lo = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCLO,
+				       &err);
 		bus->sdcnt.f1regdata += 2;
 
 		if ((hi == 0) && (lo == 0))
@@ -1229,12 +1229,12 @@ static void brcmf_sdio_txfail(struct brc
 	bus->sdcnt.tx_sderrs++;
 
 	brcmf_sdiod_abort(sdiodev, SDIO_FUNC_2);
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
 	bus->sdcnt.f1regdata++;
 
 	for (i = 0; i < 3; i++) {
-		hi = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL);
-		lo = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL);
+		hi = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+		lo = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL);
 		bus->sdcnt.f1regdata += 2;
 		if ((hi == 0) && (lo == 0))
 			break;
@@ -2446,11 +2446,11 @@ static void brcmf_sdio_bus_stop(struct d
 		bus->hostintmask = 0;
 
 		/* Force backplane clocks to assure F2 interrupt propagates */
-		saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+		saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 					    &err);
 		if (!err)
-			brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-					  (saveclk | SBSDIO_FORCE_HT), &err);
+			brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+					   (saveclk | SBSDIO_FORCE_HT), &err);
 		if (err)
 			brcmf_err("Failed to force clock for F2: err %d\n",
 				  err);
@@ -2509,7 +2509,7 @@ static int brcmf_sdio_intr_rstatus(struc
 	buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 	addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus);
 
-	val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret);
+	val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret);
 	bus->sdcnt.f1regdata++;
 	if (ret != 0)
 		return ret;
@@ -2519,7 +2519,7 @@ static int brcmf_sdio_intr_rstatus(struc
 
 	/* Clear interrupts */
 	if (val) {
-		brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret);
+		brcmf_sdiod_writel(bus->sdiodev, addr, val, &ret);
 		bus->sdcnt.f1regdata++;
 		atomic_or(val, &bus->intstatus);
 	}
@@ -2545,23 +2545,23 @@ static void brcmf_sdio_dpc(struct brcmf_
 
 #ifdef DEBUG
 		/* Check for inconsistent device control */
-		devctl = brcmf_sdiod_regrb(bus->sdiodev,
-					   SBSDIO_DEVICE_CTL, &err);
+		devctl = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					   &err);
 #endif				/* DEBUG */
 
 		/* Read CSR, if clock on switch to AVAIL, else ignore */
-		clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+		clkctl = brcmf_sdiod_readb(bus->sdiodev,
 					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
 
 		brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",
 			  devctl, clkctl);
 
 		if (SBSDIO_HTAV(clkctl)) {
-			devctl = brcmf_sdiod_regrb(bus->sdiodev,
+			devctl = brcmf_sdiod_readb(bus->sdiodev,
 						   SBSDIO_DEVICE_CTL, &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					  devctl, &err);
+			brcmf_sdiod_writeb(bus->sdiodev,
+					   SBSDIO_DEVICE_CTL, devctl, &err);
 			bus->clkstate = CLK_AVAIL;
 		}
 	}
@@ -3347,31 +3347,31 @@ static void brcmf_sdio_sr_init(struct br
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
+	val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
 	if (err) {
 		brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n");
 		return;
 	}
 
 	val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
-	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
+	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
 	if (err) {
 		brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n");
 		return;
 	}
 
 	/* Add CMD14 Support */
-	brcmf_sdiod_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
-			  (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
-			   SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
-			  &err);
+	brcmf_sdiod_func0_wb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
+			     (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
+			      SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
+			     &err);
 	if (err) {
 		brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n");
 		return;
 	}
 
-	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-			  SBSDIO_FORCE_HT, &err);
+	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+			   SBSDIO_FORCE_HT, &err);
 	if (err) {
 		brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n");
 		return;
@@ -3394,7 +3394,7 @@ static int brcmf_sdio_kso_init(struct br
 	if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12)
 		return 0;
 
-	val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
+	val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
 	if (err) {
 		brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n");
 		return err;
@@ -3403,8 +3403,8 @@ static int brcmf_sdio_kso_init(struct br
 	if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) {
 		val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN <<
 			SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
-				  val, &err);
+		brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+				   val, &err);
 		if (err) {
 			brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n");
 			return err;
@@ -3565,9 +3565,9 @@ static void brcmf_sdio_bus_watchdog(stru
 				u8 devpend;
 
 				sdio_claim_host(bus->sdiodev->func[1]);
-				devpend = brcmf_sdiod_regrb(bus->sdiodev,
-							    SDIO_CCCR_INTx,
-							    NULL);
+				devpend = brcmf_sdiod_func0_rb(bus->sdiodev,
+							       SDIO_CCCR_INTx,
+							       NULL);
 				sdio_release_host(bus->sdiodev->func[1]);
 				intstatus = devpend & (INTR_STATUS_FUNC1 |
 						       INTR_STATUS_FUNC2);
@@ -3705,12 +3705,12 @@ brcmf_sdio_drivestrengthinit(struct brcm
 			}
 		}
 		addr = CORE_CC_REG(pmu->base, chipcontrol_addr);
-		brcmf_sdiod_regwl(sdiodev, addr, 1, NULL);
-		cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL);
+		brcmf_sdiod_writel(sdiodev, addr, 1, NULL);
+		cc_data_temp = brcmf_sdiod_readl(sdiodev, addr, NULL);
 		cc_data_temp &= ~str_mask;
 		drivestrength_sel <<= str_shift;
 		cc_data_temp |= drivestrength_sel;
-		brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL);
+		brcmf_sdiod_writel(sdiodev, addr, cc_data_temp, NULL);
 
 		brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n",
 			  str_tab[i].strength, drivestrength, cc_data_temp);
@@ -3725,7 +3725,7 @@ static int brcmf_sdio_buscoreprep(void *
 
 	/* Try forcing SDIO core to do ALPAvail request only */
 	clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
 	if (err) {
 		brcmf_err("error writing for HT off\n");
 		return err;
@@ -3733,8 +3733,7 @@ static int brcmf_sdio_buscoreprep(void *
 
 	/* If register supported, wait for ALPAvail and then force ALP */
 	/* This may take up to 15 milliseconds */
-	clkval = brcmf_sdiod_regrb(sdiodev,
-				   SBSDIO_FUNC1_CHIPCLKCSR, NULL);
+	clkval = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, NULL);
 
 	if ((clkval & ~SBSDIO_AVBITS) != clkset) {
 		brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
@@ -3742,10 +3741,11 @@ static int brcmf_sdio_buscoreprep(void *
 		return -EACCES;
 	}
 
-	SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev,
-					      SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
-			!SBSDIO_ALPAV(clkval)),
-			PMU_MAX_TRANSITION_DLY);
+	SPINWAIT(((clkval = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+					      NULL)),
+		 !SBSDIO_ALPAV(clkval)),
+		 PMU_MAX_TRANSITION_DLY);
+
 	if (!SBSDIO_ALPAV(clkval)) {
 		brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n",
 			  clkval);
@@ -3753,11 +3753,11 @@ static int brcmf_sdio_buscoreprep(void *
 	}
 
 	clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
 	udelay(65);
 
 	/* Also, disable the extra SDIO pull-ups */
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
 
 	return 0;
 }
@@ -3772,7 +3772,7 @@ static void brcmf_sdio_buscore_activate(
 	/* clear all interrupts */
 	core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV);
 	reg_addr = core->base + offsetof(struct sdpcmd_regs, intstatus);
-	brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
+	brcmf_sdiod_writel(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
 
 	if (rstvec)
 		/* Write reset vector to address 0 */
@@ -3785,7 +3785,7 @@ static u32 brcmf_sdio_buscore_read32(voi
 	struct brcmf_sdio_dev *sdiodev = ctx;
 	u32 val, rev;
 
-	val = brcmf_sdiod_regrl(sdiodev, addr, NULL);
+	val = brcmf_sdiod_readl(sdiodev, addr, NULL);
 	if ((sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 ||
 	     sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4339) &&
 	    addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
@@ -3802,7 +3802,7 @@ static void brcmf_sdio_buscore_write32(v
 {
 	struct brcmf_sdio_dev *sdiodev = ctx;
 
-	brcmf_sdiod_regwl(sdiodev, addr, val, NULL);
+	brcmf_sdiod_writel(sdiodev, addr, val, NULL);
 }
 
 static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
@@ -3826,18 +3826,18 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
 	sdio_claim_host(sdiodev->func[1]);
 
 	pr_debug("F1 signature read @0x18000000=0x%4x\n",
-		 brcmf_sdiod_regrl(sdiodev, SI_ENUM_BASE, NULL));
+		 brcmf_sdiod_readl(sdiodev, SI_ENUM_BASE, NULL));
 
 	/*
 	 * Force PLL off until brcmf_chip_attach()
 	 * programs PLL control regs
 	 */
 
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-			  BRCMF_INIT_CLKCTL1, &err);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, BRCMF_INIT_CLKCTL1,
+			   &err);
 	if (!err)
-		clkctl = brcmf_sdiod_regrb(sdiodev,
-					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
+		clkctl = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+					   &err);
 
 	if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
 		brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
@@ -3897,25 +3897,25 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
 	brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength);
 
 	/* Set card control so an SDIO card reset does a WLAN backplane reset */
-	reg_val = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err);
+	reg_val = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err);
 	if (err)
 		goto fail;
 
 	reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET;
 
-	brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
+	brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
 	if (err)
 		goto fail;
 
 	/* set PMUControl so a backplane reset does PMU state reload */
 	reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol);
-	reg_val = brcmf_sdiod_regrl(sdiodev, reg_addr, &err);
+	reg_val = brcmf_sdiod_readl(sdiodev, reg_addr, &err);
 	if (err)
 		goto fail;
 
 	reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
 
-	brcmf_sdiod_regwl(sdiodev, reg_addr, reg_val, &err);
+	brcmf_sdiod_writel(sdiodev, reg_addr, reg_val, &err);
 	if (err)
 		goto fail;
 
@@ -4055,10 +4055,10 @@ static void brcmf_sdio_firmware_callback
 		goto release;
 
 	/* Force clocks on backplane to be sure F2 interrupt propagates */
-	saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
+	saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
 	if (!err) {
-		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				  (saveclk | SBSDIO_FORCE_HT), &err);
+		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				   (saveclk | SBSDIO_FORCE_HT), &err);
 	}
 	if (err) {
 		brcmf_err("Failed to force clock for F2: err %d\n", err);
@@ -4080,7 +4080,7 @@ static void brcmf_sdio_firmware_callback
 		w_sdreg32(bus, bus->hostintmask,
 			  offsetof(struct sdpcmd_regs, hostintmask));
 
-		brcmf_sdiod_regwb(sdiodev, SBSDIO_WATERMARK, 8, &err);
+		brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
 	} else {
 		/* Disable F2 again */
 		sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
@@ -4091,8 +4091,8 @@ static void brcmf_sdio_firmware_callback
 		brcmf_sdio_sr_init(bus);
 	} else {
 		/* Restore previous clock setting */
-		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				  saveclk, &err);
+		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				   saveclk, &err);
 	}
 
 	if (err == 0) {
@@ -4225,7 +4225,7 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
 	bus->rxflow = false;
 
 	/* Done with backplane-dependent accesses, can drop clock... */
-	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
+	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
 
 	sdio_release_host(bus->sdiodev->func[1]);
 
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -50,6 +50,7 @@
 #define SBSDIO_NUM_FUNCTION		3
 
 /* function 0 vendor specific CCCR registers */
+
 #define SDIO_CCCR_BRCM_CARDCAP			0xf0
 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT	0x02
 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT	0x04
@@ -131,8 +132,6 @@
 /* with b15, maps to 32-bit SB access */
 #define SBSDIO_SB_ACCESS_2_4B_FLAG	0x08000
 
-/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
-
 /* Address bits from SBADDR regs */
 #define SBSDIO_SBWINDOW_MASK		0xffff8000
 
@@ -293,13 +292,24 @@ struct sdpcmd_regs {
 int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev);
 void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 
-/* sdio device register access interface */
-u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
-u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
-void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data,
-		       int *ret);
-void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
-		       int *ret);
+/* SDIO device register access interface */
+/* Accessors for SDIO Function 0 */
+#define brcmf_sdiod_func0_rb(sdiodev, addr, r) \
+	sdio_readb((sdiodev)->func[0], (addr), (r))
+
+#define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \
+	sdio_writeb((sdiodev)->func[0], (v), (addr), (ret))
+
+/* Accessors for SDIO Function 1 */
+#define brcmf_sdiod_readb(sdiodev, addr, r) \
+	sdio_readb((sdiodev)->func[1], (addr), (r))
+
+#define brcmf_sdiod_writeb(sdiodev, addr, v, ret) \
+	sdio_writeb((sdiodev)->func[1], (v), (addr), (ret))
+
+u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
+void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
+			int *ret);
 
 /* Buffer transfer to/from device (client) core via cmd53.
  *   fn:       function number