openwrtv3/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network

70 lines
1.8 KiB
Text
Raw Normal View History

config interface loopback
option ifname lo
option proto static
option ipaddr 127.0.0.1
option netmask 255.0.0.0
config interface lan
option ifname eth0.1
option type bridge
option proto static
option ipaddr 192.168.1.1
option netmask 255.255.255.0
config interface wan
option ifname eth1
option proto dhcp
config switch
option name rtl8366s
option reset 1
option enable_vlan 1
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
option blinkrate 2
config switch_vlan
option device rtl8366s
option vlan 1
option ports "0 1 2 3 5t"
config switch_port
# Port 1 controls the GREEN configuration of LEDs for
# the switch and the section does not correspond to a real
# switch port.
#
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
# 14: Link (master); 15: separate register
option device rtl8366s
option port 1
option led 6
config switch_port
# Port 2 controls the ORANGE configuration of LEDs for
# the switch and the section does not correspond to a real
# switch port.
#
# See the key above for switch port 1 for the meaning of the
# 'led' setting below.
option device rtl8366s
option port 2
option led 9
config switch_port
# Port 5 controls the configuration of the WAN LED and the
# section does not correspond to a real switch port.
#
# To toggle the use of green or orange LEDs for the WAN port,
# see the LED setting for wndr3700:green:wan in /etc/config/system.
#
# See the key above for switch port 1 for the meaning of the
# 'led' setting below.
option device rtl8366s
option port 5
option led 2