openwrtv3/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c

133 lines
3.6 KiB
C
Raw Normal View History

/*
* Abicom International Scorpion SC300M Module support.
*
* Copyright (c) 2012 Qualcomm Atheros
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
* Copyright (c) 2017 Conor O'Gorman <i@conorogorman.net>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/platform_device.h>
#include <linux/platform_data/phy-at803x.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-eth.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-nfc.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define SC300M_GPIO_LED_WLAN 0
#define SC300M_GPIO_LED_POWER 1
#define SC300M_GPIO_BTN_RESET 17
#define SC300M_KEYS_POLL_INTERVAL 20 /* msecs */
#define SC300M_KEYS_DEBOUNCE_INTERVAL (3 * SC300M_KEYS_POLL_INTERVAL)
#define SC300M_MAC0_OFFSET 0
#define SC300M_MAC1_OFFSET 6
#define SC300M_WMAC_CALDATA_OFFSET 0x1000
#define SC300M_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led sc300m_leds_gpio[] __initdata = {
{
.name = "sc300m:blue:wlan",
.gpio = SC300M_GPIO_LED_WLAN,
.active_low = 1,
},
{
.name = "sc300m:blue:power",
.gpio = SC300M_GPIO_LED_POWER,
.active_low = 1,
}
};
static struct gpio_keys_button sc300m_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = SC300M_KEYS_DEBOUNCE_INTERVAL,
.gpio = SC300M_GPIO_BTN_RESET,
.active_low = 1,
}
};
static struct at803x_platform_data at803x_data = {
.disable_smarteee = 1,
.enable_rgmii_rx_delay = 0,
.enable_rgmii_tx_delay = 0,
};
static struct mdio_board_info sc300m_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 1,
.platform_data = &at803x_data,
},
};
static void __init sc300m_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(sc300m_leds_gpio),
sc300m_leds_gpio);
ath79_register_gpio_keys_polled(-1, SC300M_KEYS_POLL_INTERVAL,
ARRAY_SIZE(sc300m_gpio_keys),
sc300m_gpio_keys);
ath79_register_usb();
ath79_register_nfc();
ath79_register_wmac(art + SC300M_WMAC_CALDATA_OFFSET, NULL);
ath79_register_mdio(0, 0);
mdiobus_register_board_info(sc300m_mdio0_info,
ARRAY_SIZE(sc300m_mdio0_info));
ath79_init_mac(ath79_eth0_data.mac_addr, art + SC300M_MAC0_OFFSET, 0);
ath79_eth0_pll_data.pll_1000 = 0xa6000101;
ath79_eth0_pll_data.pll_100 = 0xa4000101;
/* GMAC0 is connected to the RMGII interface */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = 0xF;
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_register_eth(0);
/* GMAC1 is connected to the SGMII interface */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_register_eth(1);
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_SC300M, "SC300M", "Abicom SC300M", sc300m_setup);