openwrtv3/target/linux/ramips/dts/DIR-810L.dts

154 lines
2.4 KiB
Text
Raw Normal View History

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
model = "D-Link DIR-810L";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_green;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_power_green: power {
label = "dir-810l:green:power";
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
wan {
label = "dir-810l:orange:wan";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
power2 {
label = "dir-810l:orange:power";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
factory5g: partition@50000 {
label = "factory5g";
reg = <0x50000 0x10000>;
read-only;
};
partition@60000 {
label = "Wolf_Config";
reg = <0x60000 0x10000>;
read-only;
};
partition@70000 {
label = "MyDlink";
reg = <0x70000 0x80000>;
read-only;
};
partition@e0000 {
label = "Jffs2";
reg = <0xe0000 0x80000>;
read-only;
};
partition@170000 {
label = "firmware";
reg = <0x170000 0x690000>;
};
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
mediatek,portmap = "llllw";
};
&gsw {
mediatek,port4 = "ephy";
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
};
&pcie {
status = "okay";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};