openwrtv3/package/kernel/mac80211/files/lib/wifi/mac80211.sh

#!/bin/sh
append DRIVERS "mac80211"

mac80211_hostapd_setup_base() {
	local phy="$1"
	local ifname="$2"

	cfgfile="/var/run/hostapd-$phy.conf"

	config_get device "$vif" device
	config_get country "$device" country
	config_get hwmode "$device" hwmode
	config_get channel "$device" channel
	config_get beacon_int "$device" beacon_int
	config_get basic_rate_list "$device" basic_rate
	config_get_bool noscan "$device" noscan

	hostapd_set_log_options base_cfg "$device"

	[ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"

	[ "$channel" = auto ] && {
		channel=$(iw phy "$phy" info | \
			sed -ne '/MHz/ { /disabled\|passive\|radar/d; s/.*\[//; s/\].*//; p; q }')
		config_set "$device" channel "$channel"
	}

	[ -n "$hwmode" ] && {
		config_get hwmode_11n "$device" hwmode_11n
		[ -n "$hwmode_11n" ] && {
			hwmode="$hwmode_11n"
			append base_cfg "ieee80211n=1" "$N"
			config_get htmode "$device" htmode
			config_get ht_capab_list "$device" ht_capab
			case "$htmode" in
				HT20|HT40+|HT40-) ht_capab="[$htmode]";;
				*)ht_capab=;;
			esac
			for cap in $ht_capab_list; do
				ht_capab="$ht_capab[$cap]"
			done
			[ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N"
		}
	}

	local country_ie=0
	[ -n "$country" ] && country_ie=1
	config_get_bool country_ie "$device" country_ie "$country_ie"
	[ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"

	local br brval brstr
	[ -n "$basic_rate_list" ] && {
		for br in $basic_rate_list; do
			brval="$(($br / 100))"
			[ -n "$brstr" ] && brstr="$brstr "
			brstr="$brstr$brval"
		done
	}

	cat >> "$cfgfile" <<EOF
ctrl_interface=/var/run/hostapd-$phy
driver=nl80211
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data2_burst=0
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
${hwmode:+hw_mode=$hwmode}
${channel:+channel=$channel}
${beacon_int:+beacon_int=$beacon_int}
${country:+country_code=$country}
${noscan:+noscan=$noscan}
${brstr:+basic_rates=$brstr}
$base_cfg

EOF
}

mac80211_hostapd_setup_bss() {
	local phy="$1"
	local vif="$2"
	local staidx="$3"

	hostapd_cfg=
	cfgfile="/var/run/hostapd-$phy.conf"
	config_get ifname "$vif" ifname

	if [ -f "$cfgfile" ]; then
		append hostapd_cfg "bss=$ifname" "$N"
	else
		mac80211_hostapd_setup_base "$phy" "$ifname"
		append hostapd_cfg "interface=$ifname" "$N"
	fi

	local net_cfg bridge
	net_cfg="$(find_net_config "$vif")"
	[ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")"
	config_set "$vif" bridge "$bridge"

	hostapd_set_bss_options hostapd_cfg "$vif"

	config_get_bool wds "$vif" wds 0
	[ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"

	[ "$staidx" -gt 0 ] && append hostapd_cfg "start_disabled=1" "$N"

	local macaddr hidden maxassoc wmm
	config_get macaddr "$vif" macaddr
	config_get maxassoc "$vif" maxassoc
	config_get dtim_period "$vif" dtim_period
	config_get max_listen_int "$vif" max_listen_int
	config_get_bool hidden "$vif" hidden 0
	config_get_bool wmm "$vif" wmm 1
	cat >> /var/run/hostapd-$phy.conf <<EOF
$hostapd_cfg
wmm_enabled=$wmm
bssid=$macaddr
ignore_broadcast_ssid=$hidden
${dtim_period:+dtim_period=$dtim_period}
${max_listen_int:+max_listen_interval=$max_listen_int}
${maxassoc:+max_num_sta=$maxassoc}
EOF
}

mac80211_start_vif() {
	local vif="$1"
	local ifname="$2"

	local net_cfg
	net_cfg="$(find_net_config "$vif")"
	[ -z "$net_cfg" ] || start_net "$ifname" "$net_cfg"

	set_wifi_up "$vif" "$ifname"
}

lookup_phy() {
	[ -n "$phy" ] && {
		[ -d /sys/class/ieee80211/$phy ] && return
	}

	local devpath
	config_get devpath "$device" path
	[ -n "$devpath" -a -d "/sys/devices/$devpath/ieee80211" ] && {
		phy="$(ls /sys/devices/$devpath/ieee80211 | grep -m 1 phy)"
		[ -n "$phy" ] && return
	}

	local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
	[ -n "$macaddr" ] && {
		for _phy in $(ls /sys/class/ieee80211 2>/dev/null); do
			[ "$macaddr" = "$(cat /sys/class/ieee80211/${_phy}/macaddress)" ] || continue
			phy="$_phy"
			return
		done
	}
	phy=
	return
}

find_mac80211_phy() {
	local device="$1"

	config_get phy "$device" phy
	lookup_phy
	[ -n "$phy" -a -d "/sys/class/ieee80211/$phy" ] || {
		echo "PHY for wifi device $1 not found"
		return 1
	}
	config_set "$device" phy "$phy"

	config_get macaddr "$device" macaddr
	[ -z "$macaddr" ] && {
		config_set "$device" macaddr "$(cat /sys/class/ieee80211/${phy}/macaddress)"
	}

	return 0
}

scan_mac80211() {
	local device="$1"
	local adhoc sta ap monitor mesh disabled

	config_get vifs "$device" vifs
	for vif in $vifs; do
		config_get_bool disabled "$vif" disabled 0
		[ $disabled = 0 ] || continue

		config_get mode "$vif" mode
		case "$mode" in
			adhoc|sta|ap|monitor|mesh)
				append $mode "$vif"
			;;
			*) echo "$device($vif): Invalid mode, ignored."; continue;;
		esac
	done

	config_set "$device" vifs "${ap:+$ap }${adhoc:+$adhoc }${sta:+$sta }${monitor:+$monitor }${mesh:+$mesh}"
}

list_phy_interfaces() {
	local phy="$1"
	if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
		ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null;
	else
		ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g'
	fi
}

disable_mac80211() (
	local device="$1"

	find_mac80211_phy "$device" || return 0
	config_get phy "$device" phy

	set_wifi_down "$device"
	# kill all running hostapd and wpa_supplicant processes that
	# are running on atheros/mac80211 vifs
	for pid in `pidof hostapd`; do
		grep -E "$phy" /proc/$pid/cmdline >/dev/null && \
			kill $pid
	done

	include /lib/network
	for wdev in $(list_phy_interfaces "$phy"); do
		[ -f "/var/run/$wdev.pid" ] && kill $(cat /var/run/$wdev.pid) >&/dev/null 2>&1
		for pid in `pidof wpa_supplicant meshd-nl80211`; do
			grep "$wdev" /proc/$pid/cmdline >/dev/null && \
				kill $pid
		done
		ifconfig "$wdev" down 2>/dev/null
		unbridge "$dev"
		iw dev "$wdev" del
	done

	return 0
)

get_freq() {
	local phy="$1"
	local chan="$2"
	iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep MHz | awk '{print $2}'
}

mac80211_generate_mac() {
	local id="$1"
	local ref="$2"
	local mask="$3"

	[ "$mask" = "00:00:00:00:00:00" ] && mask="ff:ff:ff:ff:ff:ff";
	local oIFS="$IFS"; IFS=":"; set -- $mask; IFS="$oIFS"

	local mask1=$1
	local mask6=$6

	local oIFS="$IFS"; IFS=":"; set -- $ref; IFS="$oIFS"
	[ "$((0x$mask1))" -gt 0 ] && {
		b1="0x$1"
		[ "$id" -gt 0 ] && \
			b1=$(($b1 ^ ((($id - 1) << 2) | 0x2)))
		printf "%02x:%s:%s:%s:%s:%s" $b1 $2 $3 $4 $5 $6
		return
	}

	[ "$((0x$mask6))" -lt 255 ] && {
		printf "%s:%s:%s:%s:%s:%02x" $1 $2 $3 $4 $5 $(( 0x$6 ^ $id ))
		return
	}

	off2=$(( (0x$6 + $id) / 0x100 ))
	printf "%s:%s:%s:%s:%02x:%02x" \
		$1 $2 $3 $4 \
		$(( (0x$5 + $off2) % 0x100 )) \
		$(( (0x$6 + $id) % 0x100 ))
}

enable_mac80211() {
	local device="$1"
	config_get channel "$device" channel
	config_get vifs "$device" vifs
	config_get txpower "$device" txpower
	config_get country "$device" country
	config_get distance "$device" distance
	config_get txantenna "$device" txantenna all
	config_get rxantenna "$device" rxantenna all
	config_get antenna_gain "$device" antenna_gain 0
	config_get frag "$device" frag
	config_get rts "$device" rts
	find_mac80211_phy "$device" || return 0
	config_get phy "$device" phy
	local i=0
	local macidx=0
	local apidx=0
	local staidx=0
	fixed=""
	local hostapd_ctrl=""

	[ -n "$country" ] && {
		iw reg get | grep -q "^country $country:" || {
			iw reg set "$country"
			sleep 1
		}
	}

	config_get chanbw "$device" chanbw
	[ -n "$chanbw" -a -d /sys/kernel/debug/ieee80211/$phy/ath9k ] && echo "$chanbw" > /sys/kernel/debug/ieee80211/$phy/ath9k/chanbw
	[ -n "$chanbw" -a -d /sys/kernel/debug/ieee80211/$phy/ath5k ] && echo "$chanbw" > /sys/kernel/debug/ieee80211/$phy/ath5k/bwmode

	[ "$channel" = "auto" -o "$channel" = "0" ] || {
		fixed=1
	}

	iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1
	iw phy "$phy" set antenna_gain $antenna_gain

	[ -n "$distance" ] && iw phy "$phy" set distance "$distance"
	[ -n "$frag" ] && iw phy "$phy" set frag "${frag%%.*}"
	[ -n "$rts" ] && iw phy "$phy" set rts "${rts%%.*}"

	export channel fixed
	# convert channel to frequency
	local freq="$(get_freq "$phy" "${fixed:+$channel}")"

	wifi_fixup_hwmode "$device" "g"
	for vif in $vifs; do
		config_get ifname "$vif" ifname
		[ -n "$ifname" ] || {
			[ $i -gt 0 ] && ifname="wlan${phy#phy}-$i" || ifname="wlan${phy#phy}"
		}
		config_set "$vif" ifname "$ifname"

		config_get mode "$vif" mode
		config_get ssid "$vif" ssid

		# It is far easier to delete and create the desired interface
		case "$mode" in
			adhoc)
				iw phy "$phy" interface add "$ifname" type adhoc
			;;
			ap)
				# Hostapd will handle recreating the interface and
				# it's accompanying monitor
				apidx="$(($apidx + 1))"
				[ "$apidx" -gt 1 ] || iw phy "$phy" interface add "$ifname" type managed
			;;
			mesh)
				config_get key "$vif" key ""
				if [ -n "$key" ]; then
					iw phy "$phy" interface add "$ifname" type mp
				else
					config_get mesh_id "$vif" mesh_id
					iw phy "$phy" interface add "$ifname" type mp mesh_id "$mesh_id"
				fi
			;;
			monitor)
				iw phy "$phy" interface add "$ifname" type monitor
			;;
			sta)
				local wdsflag
				staidx="$(($staidx + 1))"
				config_get_bool wds "$vif" wds 0
				[ "$wds" -gt 0 ] && wdsflag="4addr on"
				iw phy "$phy" interface add "$ifname" type managed $wdsflag
				config_get_bool powersave "$vif" powersave 0
				[ "$powersave" -gt 0 ] && powersave="on" || powersave="off"
				iw "$ifname" set power_save "$powersave"
			;;
		esac

		# All interfaces must have unique mac addresses
		# which can either be explicitly set in the device
		# section, or automatically generated
		config_get macaddr "$device" macaddr
		config_get vif_mac "$vif" macaddr
		[ -n "$vif_mac" ] || {
			vif_mac="$(mac80211_generate_mac $macidx $macaddr $(cat /sys/class/ieee80211/${phy}/address_mask))"
			macidx="$(($macidx + 1))"
		}
		[ "$mode" = "ap" ] || ifconfig "$ifname" hw ether "$vif_mac"
		config_set "$vif" macaddr "$vif_mac"

		# !! ap !!
		#
		# ALL ap functionality will be passed to hostapd
		#
		# !! station !!
		#
		# ALL station functionality will be passed to wpa_supplicant
		#
		if [ ! "$mode" = "ap" ]; then
			# We attempt to set the channel for all interfaces, although
			# mac80211 may not support it or the driver might not yet
			# for ap mode this is handled by hostapd
			config_get htmode "$device" htmode
			case "$htmode" in
				HT20|HT40+|HT40-) ;;
				*) htmode= ;;
			esac
			[ -n "$fixed" -a -n "$channel" ] && iw dev "$ifname" set channel "$channel" $htmode
		fi

		i=$(($i + 1))
	done

	local start_hostapd=
	rm -f /var/run/hostapd-$phy.conf
	for vif in $vifs; do
		config_get mode "$vif" mode
		case "$mode" in
			ap)
				mac80211_hostapd_setup_bss "$phy" "$vif" "$staidx"
				start_hostapd=1
			;;
			mesh)
				config_get key "$vif" key ""
				[ -n "$key" ] && authsae_start_interface "$device" "$vif"
			;;
		esac
	done

	[ -n "$start_hostapd" ] && {
		hostapd -P /var/run/wifi-$phy.pid -B /var/run/hostapd-$phy.conf || {
			echo "Failed to start hostapd for $phy"
			return
		}
		sleep 2

		for vif in $vifs; do
			config_get mode "$vif" mode
			config_get ifname "$vif" ifname
			[ "$mode" = "ap" ] || continue
			hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd-$phy/$ifname}"
			mac80211_start_vif "$vif" "$ifname"
		done
	}

	for vif in $vifs; do
		config_get mode "$vif" mode
		config_get ifname "$vif" ifname
		[ "$mode" = "ap" ] || ifconfig "$ifname" up

		config_get vif_txpower "$vif" txpower
		# use vif_txpower (from wifi-iface) to override txpower (from
		# wifi-device) if the latter doesn't exist
		txpower="${txpower:-$vif_txpower}"
		[ -z "$txpower" ] || iw dev "$ifname" set txpower fixed "${txpower%%.*}00"

		case "$mode" in
			adhoc)
				config_get bssid "$vif" bssid
				config_get ssid "$vif" ssid
				config_get beacon_int "$device" beacon_int
				config_get basic_rate_list "$device" basic_rate
				config_get encryption "$vif" encryption
				config_get key "$vif" key 1
				config_get mcast_rate "$vif" mcast_rate
				config_get htmode "$device" htmode
				case "$htmode" in
					HT20|HT40+|HT40-) ;;
					*) htmode= ;;
				esac


				local keyspec=""
				[ "$encryption" == "psk" -o "$encryption" == "psk2" ] && {
					if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
						wpa_supplicant_setup_vif "$vif" nl80211 "${hostapd_ctrl:+-H $hostapd_ctrl}" $freq $htmode || {
							echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
							# make sure this wifi interface won't accidentally stay open without encryption
							ifconfig "$ifname" down
						}
						mac80211_start_vif "$vif" "$ifname"
						continue
					fi
				}

				[ "$encryption" == "wep" ] && {
					case "$key" in
						[1234])
							local idx
							for idx in 1 2 3 4; do
								local ikey
								config_get ikey "$vif" "key$idx"

								[ -n "$ikey" ] && {
									ikey="$(($idx - 1)):$(prepare_key_wep "$ikey")"
									[ $idx -eq $key ] && ikey="d:$ikey"
									append keyspec "$ikey"
								}
							done
						;;
						*) append keyspec "d:0:$(prepare_key_wep "$key")" ;;
					esac
				}

				local br brval brsub brstr
				[ -n "$basic_rate_list" ] && {
					for br in $basic_rate_list; do
						brval="$(($br / 1000))"
						brsub="$((($br / 100) % 10))"
						[ "$brsub" -gt 0 ] && brval="$brval.$brsub"
						[ -n "$brstr" ] && brstr="$brstr,"
						brstr="$brstr$brval"
					done
				}

				local mcval=""
				[ -n "$mcast_rate" ] && {
					mcval="$(($mcast_rate / 1000))"
					mcsub="$(( ($mcast_rate / 100) % 10 ))"
					[ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub"
				}

				iw dev "$ifname" ibss join "$ssid" $freq $htmode \
					${fixed:+fixed-freq} $bssid \
					${beacon_int:+beacon-interval $beacon_int} \
					${brstr:+basic-rates $brstr} \
					${mcval:+mcast-rate $mcval} \
					${keyspec:+keys $keyspec}
			;;
			mesh)
				mp_list="mesh_retry_timeout mesh_confirm_timeout mesh_holding_timeout mesh_max_peer_links
					mesh_max_retries mesh_ttl mesh_element_ttl mesh_auto_open_plinks mesh_hwmp_max_preq_retries
					mesh_path_refresh_time mesh_min_discovery_timeout mesh_hwmp_active_path_timeout
					mesh_hwmp_preq_min_interval mesh_hwmp_net_diameter_traversal_time mesh_hwmp_rootmode
					mesh_hwmp_rann_interval mesh_gate_announcements mesh_fwding mesh_sync_offset_max_neighor
					mesh_rssi_threshold mesh_hwmp_active_path_to_root_timeout mesh_hwmp_root_interval
					mesh_hwmp_confirmation_interval mesh_power_mode mesh_awake_window"
				for mp in $mp_list
				do
					config_get mp_val "$vif" "$mp" ""
					[ -n "$mp_val" ] && iw dev "$ifname" set mesh_param "$mp" "$mp_val"
				done
			;;
			sta)
				if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
					wpa_supplicant_setup_vif "$vif" nl80211 "${hostapd_ctrl:+-H $hostapd_ctrl}" || {
						echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
						# make sure this wifi interface won't accidentally stay open without encryption
						ifconfig "$ifname" down
						continue
					}
				fi
			;;
		esac
		[ "$mode" = "ap" ] || mac80211_start_vif "$vif" "$ifname"
	done

}


check_mac80211_device() {
	config_get phy "$1" phy
	[ -z "$phy" ] && {
		find_mac80211_phy "$1" >/dev/null || return 0
		config_get phy "$1" phy
	}
	[ "$phy" = "$dev" ] && found=1
}

detect_mac80211() {
	devidx=0
	config_load wireless
	while :; do
		config_get type "radio$devidx" type
		[ -n "$type" ] || break
		devidx=$(($devidx + 1))
	done
	for dev in $(ls /sys/class/ieee80211); do
		found=0
		config_foreach check_mac80211_device wifi-device
		[ "$found" -gt 0 ] && continue

		mode_11n=""
		mode_band="g"
		channel="11"
		ht_cap=0
		for cap in $(iw phy "$dev" info | grep 'Capabilities:' | cut -d: -f2); do
			ht_cap="$(($ht_cap | $cap))"
		done
		ht_capab="";
		[ "$ht_cap" -gt 0 ] && {
			mode_11n="n"
			append ht_capab "	option htmode	HT20" "$N"

			list="	list ht_capab"
			[ "$(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list	LDPC" "$N"
			[ "$(($ht_cap & 16))" -eq 16 ] && append ht_capab "$list	GF" "$N"
			[ "$(($ht_cap & 32))" -eq 32 ] && append ht_capab "$list	SHORT-GI-20" "$N"
			[ "$(($ht_cap & 64))" -eq 64 ] && append ht_capab "$list	SHORT-GI-40" "$N"
			[ "$(($ht_cap & 128))" -eq 128 ] && append ht_capab "$list	TX-STBC" "$N"
			[ "$(($ht_cap & 768))" -eq 256 ] && append ht_capab "$list	RX-STBC1" "$N"
			[ "$(($ht_cap & 768))" -eq 512 ] && append ht_capab "$list	RX-STBC12" "$N"
			[ "$(($ht_cap & 768))" -eq 768 ] && append ht_capab "$list	RX-STBC123" "$N"
			[ "$(($ht_cap & 4096))" -eq 4096 ] && append ht_capab "$list	DSSS_CCK-40" "$N"
		}
		iw phy "$dev" info | grep -q '2412 MHz' || { mode_band="a"; channel="36"; }

		if [ -x /usr/bin/readlink ]; then
			path="$(readlink -f /sys/class/ieee80211/${dev}/device)"
			path="${path##/sys/devices/}"
			dev_id="	option path	'$path'"
		else
			dev_id="	option macaddr	$(cat /sys/class/ieee80211/${dev}/macaddress)"
		fi

		cat <<EOF
config wifi-device  radio$devidx
	option type     mac80211
	option channel  ${channel}
	option hwmode	11${mode_11n}${mode_band}
$dev_id
$ht_capab
	# REMOVE THIS LINE TO ENABLE WIFI:
	option disabled 1

config wifi-iface
	option device   radio$devidx
	option network  lan
	option mode     ap
	option ssid     OpenWrt
	option encryption none

EOF
	devidx=$(($devidx + 1))
	done
}