KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/ramips/base-files/etc/uci-defaults/leds

92 lines
1.9 KiB
Text
Raw Normal View History

ramips: combine led setup for all boards in one file This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
#!/bin/sh
ramips: use the generic uci-default functions for initial LED setup SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
. /lib/functions/uci-defaults.sh
ramips: combine led setup for all boards in one file This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
. /lib/ramips.sh
set_usb_led() {
ramips: use the generic uci-default functions for initial LED setup SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
ucidef_set_led_usbdev "usb" "USB" "$1" "1-1"
ramips: combine led setup for all boards in one file This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
}
ramips: add support for the Senao/EnGenius ESR-9753 board Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603
2011-12-23 14:27:10 +00:00
set_wifi_led() {
ramips: use the generic uci-default functions for initial LED setup SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
ucidef_set_led_netdev "wifi_led" "wifi" "$1" "wlan0"
ramips: WAN LED for D-Link DIR-300-B1 Add led devices for D-Link DIR-300-B1 WAN LED. Note that the GPIO state is also ANDed with the esw switch port 4 LED state, which is why I've set the amber LED to default-on. Closes: https://dev.openwrt.org/ticket/11326 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> [ juhosg: - fix comment style in mach-dir-300-revb.c, - remove the PPP specific LED setup, not everyone uses a PPP connection on the WAN interface] SVN-Revision: 31989
2012-05-29 16:39:03 +00:00
}
ramips: combine led setup for all boards in one file This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
board=$(ramips_board_name)
case $board in
ramips: rt305x: add support for Edimax 3G-6200N Support for Edimax 3G-6200N router with USB. Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com> SVN-Revision: 32682
2012-07-12 13:29:46 +00:00
3g-6200n)
set_wifi_led "edimax:amber:wlan"
set_usb_led "edimax:blue:3g"
;;
ramips: add user-space support for ALL0256N This adds uci-defaults and sysupgrade support for the ALL0256N. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29883
2012-01-24 11:48:47 +00:00
all0256n)
ramips: add RSSI leds for uci-defaults for ALL0256N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33220
2012-08-22 09:46:30 +00:00
ucidef_set_rssimon "wlan0" "40000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
ramips: add user-space support for ALL0256N This adds uci-defaults and sysupgrade support for the ALL0256N. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29883
2012-01-24 11:48:47 +00:00
set_wifi_led "rt2800pci-phy0::radio"
;;
ramips: Support for NexAira BC2 The preconfiguration of the USB LED has benn move to the /etc/uci-defaults/leds script. [juhosg] Signed-off-by: Adam Porter <porter.adam at gmail.com> SVN-Revision: 28571
2011-10-24 21:49:36 +00:00
bc2)
set_usb_led "bc2:blue:usb"
;;
add support for Hauppauge Broadway This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway platform. It doesn't deal with the TV tuner or transcoder at this point, but the core functionality is working (Ethernet, wireless, USB, buttons, LEDs, etc). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> SVN-Revision: 34595
2012-12-10 14:13:01 +00:00
broadway)
set_usb_led "red:diskmounted"
set_wifi_led "red:wps_active"
;;
ramips: WAN LED for D-Link DIR-300-B1 Add led devices for D-Link DIR-300-B1 WAN LED. Note that the GPIO state is also ANDed with the esw switch port 4 LED state, which is why I've set the amber LED to default-on. Closes: https://dev.openwrt.org/ticket/11326 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> [ juhosg: - fix comment style in mach-dir-300-revb.c, - remove the PPP specific LED setup, not everyone uses a PPP connection on the WAN interface] SVN-Revision: 31989
2012-05-29 16:39:03 +00:00
dir-300-b1|\
dir-600-b1|\
ramips: add D-Link DIR-620 A1 support Full functionality runtime tested, installation via OEM web-interface requires a follow-up patch. Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing bits (including the antiparallel wps led). Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33142
2012-08-12 12:48:24 +00:00
dir-600-b2|\
dir-620-a1)
ramips: WAN LED for D-Link DIR-300-B1 Add led devices for D-Link DIR-300-B1 WAN LED. Note that the GPIO state is also ANDed with the esw switch port 4 LED state, which is why I've set the amber LED to default-on. Closes: https://dev.openwrt.org/ticket/11326 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> [ juhosg: - fix comment style in mach-dir-300-revb.c, - remove the PPP specific LED setup, not everyone uses a PPP connection on the WAN interface] SVN-Revision: 31989
2012-05-29 16:39:03 +00:00
# ANDed with vlan switch port 4 led state
ramips: use the generic uci-default functions for initial LED setup SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
ucidef_set_led_default "wan" "WAN LED (amber)" "d-link:amber:wan" "1"
ramips: add D-Link DIR-620 A1 support Full functionality runtime tested, installation via OEM web-interface requires a follow-up patch. Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing bits (including the antiparallel wps led). Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33142
2012-08-12 12:48:24 +00:00
set_wifi_led "rt2800pci-phy0::radio"
ramips: WAN LED for D-Link DIR-300-B1 Add led devices for D-Link DIR-300-B1 WAN LED. Note that the GPIO state is also ANDed with the esw switch port 4 LED state, which is why I've set the amber LED to default-on. Closes: https://dev.openwrt.org/ticket/11326 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> [ juhosg: - fix comment style in mach-dir-300-revb.c, - remove the PPP specific LED setup, not everyone uses a PPP connection on the WAN interface] SVN-Revision: 31989
2012-05-29 16:39:03 +00:00
;;
ramips: add DIR-615 D userspace support Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and Makefile changes to build images for this target. However, without the userspace bits a ramips machine can't use wifi as the necessary "eeprom" data is to be extracted by a hotplug script; also, sysupgrade support and default led configuration are missing. An IRC user reported these changes allowed him to use wifi on his hardware. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34331
2012-11-25 14:25:27 +00:00
dir-615-d|\
ramips: add support for D-Link DIR-615 H1 rt2x00 still needs some patching as the radio doesn't come to life. Installation via webflash. [juhosg: fix whitespace issues, remove rt305x_register_usb from machine setup because the board has no USB port] Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi> SVN-Revision: 33205
2012-08-17 17:56:05 +00:00
dir-615-h1)
ucidef_set_led_default "status" "Status LED (amber)" "d-link:amber:status" "0"
set_wifi_led "rt2800pci-phy0::radio"
;;
ramips: add support for the Senao/EnGenius ESR-9753 board Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603
2011-12-23 14:27:10 +00:00
esr-9753)
set_wifi_led "rt2800pci-phy0::radio"
;;
ramips: scripts updates In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871
2012-01-23 10:23:32 +00:00
f5d8235-v1)
set_usb_led "f5d8235-v1:blue:storage"
;;
f5d8235-v2)
set_usb_led "f5d8235v2:blue:storage"
;;
ramips: combine led setup for all boards in one file This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
fonera20n)
initial LED configuration for Fonera 2.0n Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips) Signed-off-by: Malte Forkel <malte.forkel@berlin.de> SVN-Revision: 32819
2012-07-24 20:38:31 +00:00
set_usb_led "fonera20n:orange:usb"
set_wifi_led "fonera20n:orange:wifi"
ramips: combine led setup for all boards in one file This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
;;
ramips: add board alias for the ALL0239-3G Generate image for the ALL0239-3G which can be flashed through the chipset-vendor SDK based firmware's web-interface and bootloader. The bootloader seems to ignore uImage checksum errors, but does complain about them once the 0xDEADC0DE was replaced by an actual JFFS2 page. I'm working on implementing fixtrx for uImage in the mtd package to solve this. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33206
2012-08-17 17:56:07 +00:00
all0239-3g|\
ramips: combine led setup for all boards in one file This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
hw550-3g)
set_usb_led "hw550-3g:green:usb"
;;
mofi3500-3gn)
set_usb_led "mofi3500-3gn:green:usb"
;;
nw718)
set_usb_led "nw718:amber:usb"
;;
ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router [juhosg: - don't switch back to 2.6.39 - update config-3.2 - change machine id to SL-R7205 - reorder case entries in platform scripts - remove button hotplug script] Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com> SVN-Revision: 30645
2012-02-19 16:44:49 +00:00
sl-r7205)
set_wifi_led "rt2800pci-phy0::radio"
;;
add Ralink V11ST-FE board support This board is equipped with: - 4MB of NOR Flash - 32MB of SDRAM - IC+ IP175C switch - one Mini-PCI slot SVN-Revision: 30561
2012-02-15 21:13:11 +00:00
v11st-fe)
set_wifi_led "rt2800pci-phy0::radio"
;;
ramips: rt305x: add initial support for Tenda W306R V2.0 More device info at: http://wiki.openwrt.org/toh/tenda/w306r Signed-off-by: David Pearce <David_18051985@hotmail.com.au> [juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages from the profile, change broken GPIO number] SVN-Revision: 31396
2012-04-21 12:30:40 +00:00
w306r-v20)
set_wifi_led "rt2800pci-phy0::radio"
;;
ramips: rt305x: add support for the ALFA Networks W502U (R36) board SVN-Revision: 29615
2011-12-28 08:43:32 +00:00
w502u)
set_usb_led "alfa:blue:usb"
set_wifi_led "rt2800pci-phy0::radio"
;;
ramips: scripts updates In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871
2012-01-23 10:23:32 +00:00
wcr-150gn)
set_usb_led "wcr150gn:amber:user"
;;
ramips: combine led setup for all boards in one file This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
esac
ramips: use the generic uci-default functions for initial LED setup SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
ucidef_commit_leds
exit 0
Reference in a new issue Copy permalink