openwrtv3/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c

105 lines
2.9 KiB
C
Raw Normal View History

/*
* Netgear WNDAP360 board support (proper leds / button support missing)
*
* Based on AP96
* Copyright (C) 2013 Jacek Kikiewicz
* Copyright (C) 2009 Marco Porsch
* Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2010 Atheros Communications
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <asm/mach-ath79/ath79.h>
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "machtypes.h"
#define WNDAP360_GPIO_LED_POWER_ORANGE 0
#define WNDAP360_GPIO_LED_POWER_GREEN 2
/* Reset button - next to the power connector */
#define WNDAP360_GPIO_BTN_RESET 3
/* WPS button - next to a led on right */
#define WNDAP360_GPIO_BTN_WPS 8
#define WNDAP360_KEYS_POLL_INTERVAL 20 /* msecs */
#define WNDAP360_KEYS_DEBOUNCE_INTERVAL (3 * WNDAP360_KEYS_POLL_INTERVAL)
#define WNDAP360_WMAC0_MAC_OFFSET 0x120c
#define WNDAP360_WMAC1_MAC_OFFSET 0x520c
#define WNDAP360_CALDATA0_OFFSET 0x1000
#define WNDAP360_CALDATA1_OFFSET 0x5000
/*
* WNDAP360 this still uses leds definitions from AP96
*
*/
static struct gpio_led wndap360_leds_gpio[] __initdata = {
{
.name = "netgear:green:power",
.gpio = WNDAP360_GPIO_LED_POWER_GREEN,
.active_low = 1,
}, {
.name = "netgear:orange:power",
.gpio = WNDAP360_GPIO_LED_POWER_ORANGE,
.active_low = 1,
}
};
static struct gpio_keys_button wndap360_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WNDAP360_KEYS_DEBOUNCE_INTERVAL,
.gpio = WNDAP360_GPIO_BTN_RESET,
.active_low = 1,
}
};
#define WNDAP360_LAN_PHYMASK 0x0f
static void __init wndap360_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_mdio(0, ~(WNDAP360_LAN_PHYMASK));
/* Reusing wifi MAC with offset of 1 as eth0 MAC */
ath79_init_mac(ath79_eth0_data.mac_addr,
art + WNDAP360_WMAC0_MAC_OFFSET, 1);
ath79_eth0_pll_data.pll_1000 = 0x11110000;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = WNDAP360_LAN_PHYMASK;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_register_eth(0);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wndap360_leds_gpio),
wndap360_leds_gpio);
ath79_register_gpio_keys_polled(-1, WNDAP360_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wndap360_gpio_keys),
wndap360_gpio_keys);
ap94_pci_init(art + WNDAP360_CALDATA0_OFFSET,
art + WNDAP360_WMAC0_MAC_OFFSET,
art + WNDAP360_CALDATA1_OFFSET,
art + WNDAP360_WMAC1_MAC_OFFSET);
}
MIPS_MACHINE(ATH79_MACH_WNDAP360, "WNDAP360", "Netgear WNDAP360", wndap360_setup);