openwrtv3/target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch

From 4ede4fbb485d0a88839df1f02371fc00755db636 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 7 Dec 2015 17:31:41 +0100
Subject: [PATCH 23/53] arch: mips: ralink: unify soc id

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/ralink/mt7620.c |   19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -37,9 +37,6 @@
 #define PMU1_CFG		0x8C
 #define DIG_SW_SEL		BIT(25)
 
-/* is this a MT7620 or a MT7628 */
-enum mt762x_soc_type mt762x_soc;
-
 /* clock scaling */
 #define CLKCFG_FDIV_MASK	0x1f00
 #define CLKCFG_FDIV_USB_VAL	0x0300
@@ -410,7 +407,7 @@ void __init ralink_clk_init(void)
 #define RINT(x)		((x) / 1000000)
 #define RFRAC(x)	(((x) / 1000) % 1000)
 
-	if (mt762x_soc == MT762X_SOC_MT7628AN || mt762x_soc == MT762X_SOC_MT7688) {
+	if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688) {
 		if (xtal_rate == MHZ(40))
 			cpu_rate = MHZ(580);
 		else
@@ -455,7 +452,7 @@ void __init ralink_clk_init(void)
 	ralink_clk_add("10180000.wmac", xtal_rate);
 
 	if (IS_ENABLED(CONFIG_USB) &&
-		(mt762x_soc == MT762X_SOC_MT7620A || mt762x_soc == MT762X_SOC_MT7620N)) {
+		(ralink_soc == MT762X_SOC_MT7620A || ralink_soc == MT762X_SOC_MT7620N)) {
 		/*
 		 * When the CPU goes into sleep mode, the BUS clock will be too low for
 		 * USB to function properly
@@ -543,11 +540,11 @@ void prom_soc_init(struct ralink_soc_inf
 
 	if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
 		if (bga) {
-			mt762x_soc = MT762X_SOC_MT7620A;
+			ralink_soc = MT762X_SOC_MT7620A;
 			name = "MT7620A";
 			soc_info->compatible = "ralink,mt7620a-soc";
 		} else {
-			mt762x_soc = MT762X_SOC_MT7620N;
+			ralink_soc = MT762X_SOC_MT7620N;
 			name = "MT7620N";
 			soc_info->compatible = "ralink,mt7620n-soc";
 		}
@@ -555,10 +552,10 @@ void prom_soc_init(struct ralink_soc_inf
 		u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
 
 		if (efuse & EFUSE_MT7688) {
-			mt762x_soc = MT762X_SOC_MT7688;
+			ralink_soc = MT762X_SOC_MT7688;
 			name = "MT7688";
 		} else {
-			mt762x_soc = MT762X_SOC_MT7628AN;
+			ralink_soc = MT762X_SOC_MT7628AN;
 			name = "MT7628AN";
 		}
 		soc_info->compatible = "ralink,mt7628an-soc";
@@ -580,7 +577,7 @@ void prom_soc_init(struct ralink_soc_inf
 		dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
 
 	soc_info->mem_base = MT7620_DRAM_BASE;
-	if (mt762x_soc == MT762X_SOC_MT7628AN)
+	if (ralink_soc == MT762X_SOC_MT7628AN)
 		mt7628_dram_init(soc_info);
 	else
 		mt7620_dram_init(soc_info);
@@ -593,7 +590,7 @@ void prom_soc_init(struct ralink_soc_inf
 	pr_info("Digital PMU set to %s control\n",
 		(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
 
-	if (mt762x_soc == MT762X_SOC_MT7628AN || mt762x_soc == MT762X_SOC_MT7688)
+	if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688)
 		rt2880_pinmux_data = mt7628an_pinmux_data;
 	else
 		rt2880_pinmux_data = mt7620a_pinmux_data;