openwrtv3/package/network/services/hostapd/patches/000-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch

From: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
Date: Fri, 14 Jul 2017 15:15:35 +0200
Subject: [PATCH] hostapd: Avoid key reinstallation in FT handshake

Do not reinstall TK to the driver during Reassociation Response frame
processing if the first attempt of setting the TK succeeded. This avoids
issues related to clearing the TX/RX PN that could result in reusing
same PN values for transmitted frames (e.g., due to CCM nonce reuse and
also hitting replay protection on the receiver) and accepting replayed
frames on RX side.

This issue was introduced by the commit
0e84c25434e6a1f283c7b4e62e483729085b78d2 ('FT: Fix PTK configuration in
authenticator') which allowed wpa_ft_install_ptk() to be called multiple
times with the same PTK. While the second configuration attempt is
needed with some drivers, it must be done only if the first attempt
failed.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
---

--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
@@ -2522,6 +2522,7 @@ static int add_associated_sta(struct hos
 {
 	struct ieee80211_ht_capabilities ht_cap;
 	struct ieee80211_vht_capabilities vht_cap;
+	int set = 1;
 
 	/*
 	 * Remove the STA entry to ensure the STA PS state gets cleared and
@@ -2529,9 +2530,18 @@ static int add_associated_sta(struct hos
 	 * FT-over-the-DS, where a station re-associates back to the same AP but
 	 * skips the authentication flow, or if working with a driver that
 	 * does not support full AP client state.
+	 *
+	 * Skip this if the STA has already completed FT reassociation and the
+	 * TK has been configured since the TX/RX PN must not be reset to 0 for
+	 * the same key.
 	 */
-	if (!sta->added_unassoc)
+	if (!sta->added_unassoc &&
+	    (!(sta->flags & WLAN_STA_AUTHORIZED) ||
+	     !wpa_auth_sta_ft_tk_already_set(sta->wpa_sm))) {
 		hostapd_drv_sta_remove(hapd, sta->addr);
+		wpa_auth_sm_event(sta->wpa_sm, WPA_DRV_STA_REMOVED);
+		set = 0;
+	}
 
 #ifdef CONFIG_IEEE80211N
 	if (sta->flags & WLAN_STA_HT)
@@ -2554,11 +2564,11 @@ static int add_associated_sta(struct hos
 			    sta->flags & WLAN_STA_VHT ? &vht_cap : NULL,
 			    sta->flags | WLAN_STA_ASSOC, sta->qosinfo,
 			    sta->vht_opmode, sta->p2p_ie ? 1 : 0,
-			    sta->added_unassoc)) {
+			    set)) {
 		hostapd_logger(hapd, sta->addr,
 			       HOSTAPD_MODULE_IEEE80211, HOSTAPD_LEVEL_NOTICE,
 			       "Could not %s STA to kernel driver",
-			       sta->added_unassoc ? "set" : "add");
+			       set ? "set" : "add");
 
 		if (sta->added_unassoc) {
 			hostapd_drv_sta_remove(hapd, sta->addr);
--- a/src/ap/wpa_auth.c
+++ b/src/ap/wpa_auth.c
@@ -1783,6 +1783,9 @@ int wpa_auth_sm_event(struct wpa_state_m
 #else /* CONFIG_FILS */
 		break;
 #endif /* CONFIG_FILS */
+	case WPA_DRV_STA_REMOVED:
+		sm->tk_already_set = FALSE;
+		return 0;
 	}
 
 #ifdef CONFIG_IEEE80211R_AP
@@ -3922,6 +3925,14 @@ int wpa_auth_sta_wpa_version(struct wpa_
 }
 
 
+int wpa_auth_sta_ft_tk_already_set(struct wpa_state_machine *sm)
+{
+	if (!sm || !wpa_key_mgmt_ft(sm->wpa_key_mgmt))
+		return 0;
+	return sm->tk_already_set;
+}
+
+
 int wpa_auth_sta_clear_pmksa(struct wpa_state_machine *sm,
 			     struct rsn_pmksa_cache_entry *entry)
 {
--- a/src/ap/wpa_auth.h
+++ b/src/ap/wpa_auth.h
@@ -300,7 +300,7 @@ void wpa_receive(struct wpa_authenticato
 		 u8 *data, size_t data_len);
 enum wpa_event {
 	WPA_AUTH, WPA_ASSOC, WPA_DISASSOC, WPA_DEAUTH, WPA_REAUTH,
-	WPA_REAUTH_EAPOL, WPA_ASSOC_FT, WPA_ASSOC_FILS
+	WPA_REAUTH_EAPOL, WPA_ASSOC_FT, WPA_ASSOC_FILS, WPA_DRV_STA_REMOVED
 };
 void wpa_remove_ptk(struct wpa_state_machine *sm);
 int wpa_auth_sm_event(struct wpa_state_machine *sm, enum wpa_event event);
@@ -313,6 +313,7 @@ int wpa_auth_pairwise_set(struct wpa_sta
 int wpa_auth_get_pairwise(struct wpa_state_machine *sm);
 int wpa_auth_sta_key_mgmt(struct wpa_state_machine *sm);
 int wpa_auth_sta_wpa_version(struct wpa_state_machine *sm);
+int wpa_auth_sta_ft_tk_already_set(struct wpa_state_machine *sm);
 int wpa_auth_sta_clear_pmksa(struct wpa_state_machine *sm,
 			     struct rsn_pmksa_cache_entry *entry);
 struct rsn_pmksa_cache_entry *
--- a/src/ap/wpa_auth_ft.c
+++ b/src/ap/wpa_auth_ft.c
@@ -1937,6 +1937,14 @@ void wpa_ft_install_ptk(struct wpa_state
 		return;
 	}
 
+	if (sm->tk_already_set) {
+		/* Must avoid TK reconfiguration to prevent clearing of TX/RX
+		 * PN in the driver */
+		wpa_printf(MSG_DEBUG,
+			   "FT: Do not re-install same PTK to the driver");
+		return;
+	}
+
 	/* FIX: add STA entry to kernel/driver here? The set_key will fail
 	 * most likely without this.. At the moment, STA entry is added only
 	 * after association has been completed. This function will be called
@@ -1949,6 +1957,7 @@ void wpa_ft_install_ptk(struct wpa_state
 
 	/* FIX: MLME-SetProtection.Request(TA, Tx_Rx) */
 	sm->pairwise_set = TRUE;
+	sm->tk_already_set = TRUE;
 }
 
 
@@ -2152,6 +2161,7 @@ static int wpa_ft_process_auth_req(struc
 
 	sm->pairwise = pairwise;
 	sm->PTK_valid = TRUE;
+	sm->tk_already_set = FALSE;
 	wpa_ft_install_ptk(sm);
 
 	buflen = 2 + sizeof(struct rsn_mdie) + 2 + sizeof(struct rsn_ftie) +
--- a/src/ap/wpa_auth_i.h
+++ b/src/ap/wpa_auth_i.h
@@ -61,6 +61,7 @@ struct wpa_state_machine {
 	struct wpa_ptk PTK;
 	Boolean PTK_valid;
 	Boolean pairwise_set;
+	Boolean tk_already_set;
 	int keycount;
 	Boolean Pair;
 	struct wpa_key_replay_counter {